VPN access to the not directly connected networks

Similar Questions

• Drivers to be used on networked computers that are not directly connected to the HP Laserjet M1536dnf MFP

  Hi, I had problems connecting to computers on the network for printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly via USB is fine. I downloaded solution complete driver installation on the site of hp, them and everything's fine. the problem is with the computers on the network, they cannot detect even the computer to add printer. And I have enabled file sharing and printer sharing advanced options of sharing on all computers. I also tried to install the same drivers I used on the local computer on the network computers, but its does not work. Please kindly advise me on which particular driver should I use or the solution.

  for this one, there was a simple solution... I forgot one small thing. After the installation of the complete solution from hp printer drivers on the computer connected to the printer via the usb port you then go to control panel > view devices and printers > click with the right button on active printer installed > printer properties > sharing > click on the list to the Director. that allows other computers on the network to view the printers.  was a bit stupid coz the solution was so simple.

• ASA5505 can transfer clients to remote VPN access to the local network

  I have currently ASA 5505 and 2911-router and I am trying to configure the VPN topology.

  Can ASA5505 you transmit to remote VPN access clients LAN operated by another router?

  These two cases are possible? :

  (1) ASA 5505 and 2911-router are separate WAN interfaces, each connected directly to the ISP. But so can I connect an other interfaces LAN of ASA 5505 in a switch managed by 2911 router customers to distance-SSL-VPN to inject into the local network managed by the router?
  (2) ASA 5505 is behind router-2911. May 2911 router address public ip or public ip address VPN-access attempts have directly be sent to ASA 5505 when there is only a single public ip address address available?
  Long put short, ASA 5505 can inject its clients to remote-access-VPN as one of the hosts on the local network managed by 2911-router?
  Thank you.

  I could help you more if you can explain the purpose of this configuration and connectivity between the router and ASA.

  You can activate the reverse route on the dynamic plane on the SAA. The ASA will install a static route to the customer on the routing table. You can use a routing protocol to redistribute static routes to your switch on the side of LAN of the SAA.

• to reach a server on a VLAN that is not directly connected to the inside interface

  scénarion

  PIX 515

  6506 core with VLAN A, B, c. (intervlan routing is ok)

  vlanC is directly connected to the inside interface of the fw

  question

  How a crowd outside could reach a server ServerA on vlanA.

  Hello

  Concerning Point 1, Yes if the roads required for networks connected inside the network is done on pix.

  Concerning Point 2, if the IP address that you use within the network is routable (public IP), the command you gave will work. The command indicates that when 10.10.1.10 inside the network host wants to go outside the network, use the same IP address. Because NAT does not occur, the actual address of the server presents itself as the visible address and the address of the host. So if the IP address you specify is not a public IP address, outside world can't access.

• Cisco ASA 5505 remote VPN access to the local network

  I have installed two ASA 5505 VPN site to site that works perfectly.  Now, I also need to have 1 customer site to remote access VPN with Cisco VPN dialer.  I can get the VPN dialer to connect the VPN and get a VPN IP address, but I do not have access to the remote network.  can someone take a look and see what I'm missing?  I have attached the ASA running config.

  Apologize for the misunderstanding.

  To access the remote vpn client 10.10.100.x subnet, the vpn-filter ACL is the opposite.

  Please please share the following ACL:

  FROM: / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  outside_cryptomapVPN list of allowed ip extended access any 10.10.20.0 255.255.255.224

  TO:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  outside_cryptomapVPN to access extended list ip 10.10.20.0 allow 255.255.255.224 all

  Hope that helps.

• Aironet 1700 not directly connected to the cat 3650

  I need to understand that if I have 2 AP (Aironet 1700) NOT physically ending with a Cisco switch 3650, the function of the 3650 wireless controller will be able to control and manage the Aironet 1700?

  The Aironet will end in a SG300 and the SG300 ends to the 3650 (core switch). Termination of directly in the switch of the AP can be difficult because of the floor plan and the placement of the 3650, who sits in a corner of the office.

  Thanks for any help!

  Hi delphine,.

  Indirectly mode pass through or connected access points are not supported on switch 3650. 3650 will always take the CAPWAP tunnel locally.

  To make your 3650 manage your access point, you must physically end at 3650 of the AP.

  Let me know if you have any questions or concerns.

• Network Diagnostics cable - A is not connected to the Local Area Connection network adapter

  All the links are perfect - network card appears in Device Manager and work - ping 127.0.0.1 but seeing none on in the network connection - cable works in another system - I unplugged the power cables one night and restarted but no result-help solve this problem

  Hello

  Follow the steps in troubleshooting section and check if that helps:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Also read these articles and check if it helps:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

• Update Windows using the two direct connection to proxy nd

  Use the two nd direct net connection by proxy, more time via proxy, is there a way I can configure update without changing the settings?

  am on windows 7 Home premium

  Please correct me if wrong, using "netsh winhttp import proxy IE" it says you can update via proxy, passing 'autamatically detected settings' proxy servers, will be here all the problems and errors in its conclusion/search for updates (does not search for updates error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000")?

  Asked me to do this update of proxy (windows security essentials)

  The open command prompt window. [In Vista and Windows 7 you need to open the prompt as Administrator]

  2. type of this syntax: NETSH WINHTTP PROXY DEFINED (Insert here the number and proxy server) and press ENTER.

  Example: NETSH WINHTTP SET PROXY 1.1.1.1:8080
                         OR: NETSH WINHTTP SET MYPROXY .NET PROXY: 8080

  If his point is it normal that windows update as well as the WSE update fails with direct connection?

  happened with me with error msg error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000"

  If the details of my proxy are 192.168.0.1 port 3128, which is the entrance to the command line...

  I had to reset the connection parameters using winhttp reset to retrieve the update in direct connection to the network

  Please give me a good solution with this

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072ee20x80072EE7; 0xC80003FA 0X8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• LaserJet 2100 direct connect network assistance

  Hello techies.  I need help please.

  I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection.  It is without a server between the computer and the printer.

  Has been fighting for more than a week. Time for me to reach and ask for help.

  It is not recognized.

  Print a page of Cofiguration Jetdirect info I get the following information:

  LAN HW address: 001083F3A247

  External Loopback 03 error is NOT READY i/o card

  TCP/IP STATUS: 55 CURRENT BOOTP/DHCP

  HOST NAME: NPIF3A247

  IP address: 0.0.0.0

  IPX/SPX STAUUS: impossible to 29 net number of senses

  NAME OF THE NŒUD: NPIF3A247

  I was able to CLEAR the error of closure by doing a loopback plug.

  Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box.  NONE of them worked.

  Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192.  Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.

  My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.

  Key questions are:

  1 what I'm missing or doing wrong?

  2 - is a dead Jetdirect card?

  I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.

  It would be worth to try myself to a substitution of the 620n for my 600n card?

  Thanks in advance for your help.

  John

  "LittleJohn1969" wrote in message News: * e-mail address is removed from the privacy * .com...

  Hello techies.  I need help please.

  I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection.  It is without a server between the computer and the printer.

  Has been fighting for more than a week. Time for me to reach and ask for help.

  It is not recognized.

  Print a page of Cofiguration Jetdirect info I get the following information:

  LAN HW address: 001083F3A247

  External Loopback 03 error is NOT READY i/o card

  TCP/IP STATUS: 55 CURRENT BOOTP/DHCP

  HOST NAME: NPIF3A247

  IP address: 0.0.0.0

  IPX/SPX STAUUS: impossible to 29 net number of senses

  NAME OF THE NŒUD: NPIF3A247

  I was able to CLEAR the error of closure by doing a loopback plug.

  Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box.  NONE of them worked.

  Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192.  Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.

  My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.

  Key questions are:

  1 what I'm missing or doing wrong?

  2 - is a dead Jetdirect card?

  I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.

  It would be worth to try myself to a substitution of the 620n for my 600n card?

  Thanks in advance for your help.

  John

  Without any kind of switch between the printer and the computer, you absolutely have a cable modem Simulator for your connection "ethernet".  You will NOT be able to use a standard ethernet cable.
   
  Once you find this crossover cable and that you ran a test on the printer print to the default IP address (read the printer or jet direct instructions on the card to print or otherwise find the Jetdirect card settings) then you can create a new "printer port" using the IP address of the card direct jet to join the two.    192.0.0.192 isn't usually an IP address by any device (I've never seen anywhere.)  It would more likely be something like 192.168.1.xxx.
   
  Also, you should be able to buy a switch 4 ports and do the same thing with standard ethernet cables.  Plug the computer and jet direct card printer on the switch.

• Access to the hard drive USB network - WAG310G

  Hello.. I have a 500 GB USB hard drive attached to my WAG310G, but it can be accessed from the network. IM using XP Pro.

  Someone suggested to go to start / run and typing \\192.168.1.1\, but I just get an error "the network not found path.

  This seems to be a really hard to find an answer, because I can't find any help on the internet either.

  Help, please!

  See / Kevbb.

  I think that you do not have the possibility to access the drive on the network, but you can use the interface of the router to store your entire network on the USB connected to your router.

  If you have DDNS service, you can manage the storage device using the WAN IP address. To enable WAN HTTP access, you must enable remote access on the Administration > management screen and disable the firewall on the security > firewall screen.

• script access to the notes to article

  I'm trying to make use of the attribute of the note. The script reference (JS) lists only an editable property 'note' to the elements of the art.

  Now I can pay the Bill through the script, and it appears in the attribute Panel, if it was otherwise undefined. If I put the note through the user interface, the user interface displays user input, whereas a script read the note will indicate only the values that have been defined by a script. Is there a way to access users and portions of the script of the note? Also, is it possible to include the note to export svg?

  can you post your code?

  It makes no difference if a note is set manually or with JS, javascript can and accesses it note if it exists.

• GPO applied to laptops when not directly connected to the network?

  OK, I have a question that should be easy.

  Are Group Policy objects applied even when a computer (such as a laptop) is not connected to your internal network?

  So if I had a laptop that is used normally on my internal network, and then I bring home, Group Policy objects that affect the laptop when I am connected internally, still influence the laptop when I am at home?  Thank you!

  WJ

  To be honest, you will get a more complete answer on the Technet site.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• HP 3520: HPAiO does not appear connected network printer

  I have a HP 3520 printer all-in-one connected by Wi - Fi as a network printer. It is connected and I have printed all of her documents.

  When I tried to find the ink level, then I used "Devices and printers", double clicked on the HP 3520 and then tried to use option 1 available to check the status of the printer etc.. The HP AiO screen appeared and showed my printer 'offline '. I restarted my printer and I tried again. I rebooted my computer and tried again with the same result.

  I downloaded HP Print & Scan Doctor and he immediately showed my HP75B0B (HP Deskjet 3520 series) connected to the network and showing its network address. I then used the program to see the printer ink levels.

  Why a bit of the HP software does not give the same result as another piece of HP software? The original software delivered with the printer worked perfectly and allowed me to see the ink levels etc with no problems. The software that has taken its place does not work. Why?

  Hello

  The HP all in a distance does not take the place of full features software, it is an option of additional software requiring the HP software to be installed.

  For the HP All In One app to work, it requires installing the HP software as shown below:

  http://support.HP.com/us-en/document/c04675142

  Follow this tool to get the complete HP software:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PIW

  After completing the installation, you can use the HP printer Assistant as, or use the HP All In One Remote application.

  Shlomi

• Multihomed BGP - which will broadcast directly connected networks?

  I'm labing in place a script on my site of practical Cisco HSRP, BGP GNS3 and perhaps grow later on network practice as well other protocols.

  http://www.Cisco.com/en/us/Tech/tk365/technologies_configuration_example09186a0080093f2c.shtml

  Everything is already configured and the installer, except that I don't have interconnection routes announced to any BGP process on routers, still.

  Interconnection networks as you can see in the photo are:

  192.168.31.0

  192.168.42.0

  192.168.63.0

  192.168.64.0

  

  Obviously I can't source these networks of each router, or use redistribute connected on each router because I would get duplicate routes, so my question is: what routers you use to come from these 4 networks of? I was thinking of using the network control (or maybe even a map of the route) on ISPA for networks 192.168.31.0 and 192.168.63.0 and ISPB for networks 192.168.42.0 and 192.168.64.0.

  What is the appropriate method of world real something like that, or there are several ways to do this correctly?

  Thanks in advance

  Hi Vanjaburic,

  Failure RIB is not a problem. You'll see this output normally where BGP route is not able to settle in to the routing table, as a route to higher value AD is already there in the routing table. Here we have a static route.

  more information on the failure of BGP RIBS

  http://blog.ioshints.info/2007/12/what-is-BGP-rib-failure.html

  • The function of failure on the SIDES was introduced in IOS version 12.2 T; before that, the BGP routes with superior remote than other sources of road administration have been ignored in silent mode (like all other routing protocols).
  • You can view the BGP routes that are not inserted into the table of IP routing with the commandshow ip bgp ribs-failure , which also explains why the road BGP not was not inserted in the IP routing table.
  • BGP which are not used due to the higher administrative distance roads are always announced to all BGP peers (contrary to what most other distance-vector routing protocols do), unless you configure bgp delete-inactive (introducted in 12.0 and 12.2 T (26) S).

  Kind regards

  Assani

• PIX v7 speaks to talk about vpn access via the hub of pix

  Hello

  Does anyone know if the v7 PIX code supports the overs speaks of talking about VPN connectivity?

  For example, 3 sites, Hub, to talk to and A of spoke spoke of b and B connect in the hub (PIX) with VPN.

  With earlier versions of the software, the rays would not be able to communicate. Is this possible with the new version of the code?

  Thank you

  Hello

  As long as the hub is running v7, you should be able to do. See

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

  for an example.

  HTH

  Kind regards

  Cathy