Thin horizontal black lines when looking at youtube

Similar Questions

• thin horizontal black line down page what scan on HP Officejet Pro 8600 more

  I've owned an HP Officejet Pro 8500 and scan was perfect.  I recently bought a HP Officejet Pro 8600 Plus.

  When I scan from the ADF HP 8600, I get a thin (several pixel wide) black along the lower edge of the analysis that results.  This line will be sometimes slightly twisted or appear only through half of the page, in which case, it tends to become thicker towards the edge of the page).  According to me, this line is an artifact of the analysis of the edge at the bottom of the original document.  I think it is to show where the bottom edge of the page was when parsing.  If the document is that a little offset, then the black line down will be a little twisted, probably following the edge of the page.  This issue is consistent and reproducible.  It is in the mode "Scan mail" and in mode 'Scan To Network Folder.

  When I scan from the flat bed, I get a very narrow black line along the side of the analysis resulting very superior, but the background seems in good condition (although I have not tested this widely).

  These fine black lines occurred when scanning the HP 8500.

  I wonder if there is a setting to adjust it, or if it is a firmware difference between printers needs debugging.

  Hey KenAlker,
  
  There are a few things I want to check if you have lines when scanning using the 8600. I see that mention you that lines appear both through ADF and flat glass. There may be something both of the glass sections used by this printer, but more often that otherwise, this isn't the case.
  
  I would check if the printer is connected to a surge protector. If this is the case, then try plugging the 8600 in a direct outlet. Often the surge protector can cause this problem appears because the printer has a built.
  
  Also, try a hard reset:
  * Unplug the unit while the
  Disconnect the other end of the wall socket direct
  * Wait 30-60 seconds
  * Plug the unit to the top
  
  Also, try to take a look at the steps in the document found here.
  
  I hope this helps.

• Horizontal black lines on CP1515N

  Hello

  My CP1515N of HP color laser printer has started to produce horizontal black lines.

  

  Lines are about 27mm and begin at different places on each page.

  The unit has printed only about 2500 pages.

  I don't know what is the cause.

  Pages that are totally black look. No irregularity what so ever, with the same shine on the entire page. I think that the rules on the fuser.

  Cleaning things did not help.

  Does anyone have an idea what could be the cause?

  Repairs of the unit is more expensive than buying an all in one inkjet printer. Replacement toner cartridges is also much more expensive and it is not certain that it will fix the problem.

  I hate throwing things away simply because their repair is too expensive.

  I hope that someone has experienced or seen something like this before and can help.

  Thanks in advance.

  Best regards

  Jan Polet

  It turned out to be the cartridge after all. It has been replaced. Problem solved.

• Visible, thin and black lines around the layer mask.

  Hello, in a current project I'm finish, there visible, thin and black lines around the perimeter of each layer. These layers have layer masks. I tried to merge the layers (shift, ctrl, alt + E) and flattening, but the lines are still visible. Help, please!

  Thanks in advance!

  Photoshop CC

  Windows 8.1

  3.7 ghz I7

  64 GB of ram

  1 gb player/os ssd

  16 TB Raid 3 array work / scratch

  You must read and watch tutorials masking. Look at sites like Russell Browns to topics such as advanced masking and extraction and practice. Sometimes its inpossible create a very good mask in these cases, you need to fix it

  

  

  full size link http://www.mouseprints.net/old/dpr/TryHard.jpguse open the link in a new window or tab.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• OfficeJet L7680 - thick horizontal white lines when printing faxes and fed through copies

  Fine prints from the computer.

  Print fine, but now when you print a fax or copy a fed, I'm thick horizontal white lines making it impossible to read some of the impression.

  It was suggested to me to uninstall and then reinstall as a power surge may have corrupted a file create this problem. Cannot figure out how unintall it. It does not appear in my program announcements. to remedy this, I downloaded an updated driver. Did not help.

  Hello sz6,.

  Looks like you may need to clean the lid of the scanner printer and it's other components.

  See this troubleshooting article for step by step instructions.

  Vertical stripes, lines or streaks on Copies, faxes or scan

  This article can also help to solve your problem.

  Received faxes are empty or have vertical lines

  Articles specifically mention the vertical lines, but given that printing works very well and it has only the faxes or scans I think that information is still valid.

• HP Officejet Pro 8600 - black lines when copying, colored scanning lines

  Hello

  I have a HP Officejet Pro 8600. When I try to copy from glass, copy of ADF, I get black lines going the length of the pages. Whenver I scan, once more, the glass or ADF I get lines colored, ranging from the length of the analysis. I called HP customer service and the representative told me clean the glass and part inside of the ADF, but the problem still remains. No idea if this is a common problem? More important still, how fix it.

  Do a hard rest on the printer. Let the printer and unplug the power cord. In doing so, it will remove the lines.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

  Valerie, printer Agent

• Adobe Photoshop CS2: digitization of the clip and get an unwanted black line when recording in PNG

  l work in Photoshop pencil and pen drawing of mine sweeping in the computer to convert them to digital files. I save as a bitmap black and white clipart as Formate file extension .png.  My problem I noticed is when I go to import to tell Indesign which, on the right side of art, work is a continuous line. I can go back to Photoshop and the spectacle of clip art that there is nothing there. I tried to copy and past and save as a new file name and still appear when I import clip in another program. My question is what this causes some clipart that I work in and some that I do is not the solid black line? Can help me here I am puzzled why it appear after you save the file and import clip in anorther program. I'm trying to set up a book clip art for my older sister of all my scribbling because she was missing and so went back to my art book and paper than o doodled on and all scanned

  in and want to ensure own clipart and be displayed with this line on the side of them. Thank you for your time, I appreciate all the help I can get. Larry White

  Hello

  May I know what is the version of the Photoshop and in-design you use.

  Have you tried to save the file in another format and then tried the same thing.

  Thank you

• Why my films are released in the form of thin and green lines when working in Windows Movie Maker?

  When I change the video, everything seems fine. I can see the video, I can modify it. But when I publish it, it becomes a black screen with a thin, green line oriented horizontally or vertically, that it seems to vary.

  I tried redownloading Windows Movie Maker (the link is on my Hotmail page) and it did not help. It's actually when the line is vertical.

  The strange thing is the titles on video and audio actually appear very well. But I don't think it's my camera because the video plays very well before I publish it. So what the hell is happening?

  I use a Flip camcorder if that helps.

  Here's a video showing the problem. You can hear the sound and see the title wipe across the screen: http://www.youtube.com/watch?v=guL_l-YOz8E

  Not sure if I have a few other Codec here or not, but I think I could.

  In any case, I realized the problem WITH WMM, I went and tried to save other ways and go with more parameters: DV - AVI (PAL) works!

• Why is 1/2 on the sceen blacked out when I play youtube videos

  1/2 OF THE SCREEN IS BLACKED OUT ON YOU-TUBE VIDEOS

  IT SHOWS THAT 1/2 OF THE VIDEO, THE OTHER 1/2 IS BLACKED OUT

  IT IS CUT RIGHT DOWN THE MIDDLE OF THE SCREEN

  I DON'T SEE THAT 1/2 OF THE VIDEO

  Hello

  1. have you made changes on the computer recently?
  2. what Internet browser do you use?

  Method 1.
  Try to play another video on youtube and check.

   
  Method 2.
  Given that most online videos require Adobe flash to work I suggest you install Adobe Flash player in Internet Explorer.
  I recommend you update Adobe flash player on the website below:
  http://get.Adobe.com/flashplayer/
  I hope this helps.

• Under Type menu - Insert a special character - markers - current Page number in the text frame on the Master Page gives the letter A and also a horizontal black line the width of the text box.   This line is not a rule.  Turn on the Wellin gives another l

  Is anyone out there?

  I found the problem.  It was a rule after all.  I didn't the insertion point to the right place.  Everything is OK now.

• I have a HP Officejet Pro 8600 and when face I get a thin black line

  HP Officejet Pro puts a thin black line on my pages

  Hello

  You are able to print a self - test page, or print a document - you get the same black line when printing.

  You try to copy from the glass of the scanner or automatic document feeder?

  If the printout is fine without the black line and the problem only occurs when you copy - follow the steps mentioned in the document.

  http://support.HP.com/us-en/document/c02881567

  Although I am an employee of HP, I speak for myself and not for HP.
  Click on the star of CONGRATULATIONS on the left to say 'thank you '.
  Please check one response to "ACCEPTED solution" if it has solved your problem, while others may find it.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• Using every night and compared to IE where I don't have a problem, there are black lines on all the pages of certain facilities of forum. Have screenshot.

  At first, I was told it was my video driver, but maybe it could be the motherboard. However, IE on the same pages of vBulletin does not horizontal black lines thin and thick, as shown in my screen shopt.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• HP Officejet 7000 Wide Format print black lines on photos

  HP Officejet 7000, model # E809a, began to print horizontal black lines, at equal distance about 1/2 in., through photos.  I ran a cleaning cycle that showed felt clean, without burrs, without black lines.  Please advise...

  Hello MerlotLady,

  The lines are clearly visible and look like, they are caused by the inkt not bleeding very well through the paper. In this case I advise to use another document. I checked the HP website for you and HP recommend the advanced use of paper. If any kind of HP Advanced paper will do, either gloss or high gloss as long as it's the HP Advanced line. A copy of the recommendation below. If this will still not solved the problem, best thing to do is contact your local HP support. Let me know if it helps.

  "Advanced photo paper.

  Best for printing with HP 02, 38, 60, 110, 564, 920 or 940 inks; «you get vivid, dry instantly, stain - resistant and water - photos»