Network Magic will work on an Archos Tablet

Similar Questions

• Firefox 3 x will work on my android Tablet? I need the old version to open a Web site.

  I don't find a way to download older firefox. everything wants to put up-to-date.

  The first version of Firefox mobile for Android was the former Firefox 4.0

  There was no 3.0.x 3.5.x and 3.6.x releases to Android.

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• Try to uninstall Pure Networks Network Magic, platform Assistant works, how can I get rid of it, can not find in my system

  Have left nmrsrc.dll and 2 files nmspce2.dll.  Tried to delete it tells me that they are protected and hidden, do not know how to display them, nothing doesn't show in Add/Remove programs and windows search can not find them.

  PFure networks Platform Wizard keeps saying it has encountered a problem and needs to close, have removed the remaining files, but cannot get rid of these two.  What should do?

  Hello

  To view the files in XP follow these steps:

  a. in desktop screen click Start, then Control Panel, Panel Options.

  b. click on the view tab and check the box "see the hidden files and folders" and press OK.

  c. you will now be able to see all files and folders hidden on your computer. You can do a right click on the hidden folder and uncheck the hidden box and apply the changes to display it.

  See this article on how to uninstall Network magic: http://www.purenetworks.com/support/faq/13.html

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=104&VW=1&articleid=21926

  If you cannot uninstall the program, contact support for Network Magic team.

  Thank you very much for trying to help, find the files I had to remove, they do not delete found files in Mode safe and they deleted properly.  When I cliked show hidden and program files did not see them, Safe Mode works perfectly.  Good job!

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• Will 1st gen magic mouse will work with the new Mac Mini?

  #1

  I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

  The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

• APPLE MAGIC MOUSE - THIS WILL WORK ON WINDOWS?

  I'm running Windows 7 on two different computers and would like to buy the Apple Magic Mouse (wireless).  It will work with Windows if I install the drivers from third party sites, I see online?
  I like to hear from anyone who tried.  Some reviews say it works... Some say it is not.
  Given that some Apple systems have installed MAC and Windows systems... I don't understand why Apple does not only provide drivers for this mouse works with both.

  Greg

  Hello Greg,.

  Apple magic mouse won't work with Windows 7 or else no matter what Windows operating system. It is specially designed for Mac users and not users of Windows.

  The requirements for the magic mouse from Apple has been considered by the Apple site

  
  The system configuration required

  * Computer Mac with Bluetooth wireless technology
  * Mac OS X 10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
  * Existing keyboard and mouse for the installation
  * Two AA batteries (included)

  For more information about the magic mouse from Apple, visit the following Web site: http://www.apple.com/magicmouse/

  Aziz Nadeem - Microsoft Support

• My HP6500 wireless printer does not work. get the message that my network not recognize my printer and need to start OneNote before it will work

  My HP6500 wireless printer was working well until 2 days ago.  Now, I get a message that my network does not recognize my printer.  I also have a message that says I need to run OneNote before it will work.  any suggestions on where to start

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  Method 1:

  I suggest review the links and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Network and wireless printing problems

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3795309&prodTypeId=18972&supportTaskId=42468

  Solve a problem

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodClassId=-1&prodTypeId=18972&prodSeriesId=3795309

  Let us know if it helps.

• DNS will work within a private network that includes only a virtual switch?

  I have a private network defined in free ESXi 5.5 using only one virtual switch.

  Virtual machines on this virtual switch can ssh them using their IP addresses.

  I have configured the DNS on one of the virtual machines in this private network, but it will not

  resolve hostnames to IP addresses.

  Simple question, DNS can run on a private network that is composed

  only a switch virtual ESXi?

  Yes it will work, but you first need to register all the names of virtual machines and the IP address on the DNS server and point the entry of DNS server on the virtual machines to IP address of the DNS server that you deployed.

• Network Magic and Cisco router EA4500 UID and password

  I use the 5.5.9150.0 version of the free product. I had my last router, with a WRT400N. Since then, I have installed an EA4500 router to replace the WRT400N. I'm glad that Network Magic works with my new router, but I have a problem: I can't connect to my router via Netowrk Magic.

  Protection status/Wireless / Wireless Protection settings brings up a window that asks you the router user name and the password. I went to the page "Setting Up: Basics" guide of the user EA4500 (page 13) and tried all the values that I had copied in when I installed the router.

  I tried the SSID of the router and the "Linksys Smart Wi - Fi Username ' in the user ID box.

  I tried the "Linksys Smart WIFI password", the network, the Guest network password password and the router password (same as the network password).

  Nothing has worked. I've only connected to the EA4500 using the Linksys Smart WiFi, username and password, so I'm stuck trying to figure what values to use.

  Please help me understand what I am doing wrong. Thank you!

  I stumbled in the response:

  1. start Network Magic and display the network map.

  2. click on the name of the router (just under the router icon).

  3. click on Set Up or manage the device.

  4. the Linksys WiFi Smart Sign In (to the router) window appears.

  5 connect to the router by using the credentials of Smart Wi - Fi that you set up when you have installed the router.

  Now, all router commands will work from within Network Magic.

  :+)

• Network magic pro v5.5.9118.2Pure0 & windows home server

  Network Magic Pro v5.5.9118.2Pure0 will run on a Windows Home Server without interfering with the normal operation of the servers?

  I've tried it on Windows Home Server (which is actually a hybrid version of Windows 2003 Server) and it works fine without any interruption. (Noted however, if you connect a second NETWORK adapter to a separate router, you will lose the network card)

• How to disable the Network Magic Splash Screen feature?

  Anyone can guide me please you through the steps to disable the Network Magic boot screen? I bought the software a few years back and saw a message, how to do it. I did, and it worked a treat... until a recent bug on my computer forced a major restoration, which brought back the splash screen. Now, I forgot (of course) how I disabled it in the registry. I know that this question is compared to the major probs that here, others have small potatoes, but I hope that someone will still give me a little help.

  Well, that's interesting! I really thought that it was a common problem, which need a registry edit to remove the splash screen, as is the case with other programs. I was wrong.

  So, once a hardware problem (I just had one of my hard drives go bad), I'll follow your advice by uninstalling and then reinstalling Network Magic. The splash screen I see, which appears just after the start and central rest before and during the complete boot process, is a pale green rectangle with 'Pure Networks' (and a little of the rest of the text) on this subject. I'll report after trying your solution.

  Thanks much for the reply.

  Chris

• Dell Wireless 802 1801.11bgn it will work on router dual-band 5 ghz?

  Hi all

  I have a Dell XPS 8900 Costco, Windows 10 i7 Setup.

  It has a Dell 802 adapter wireless network 1801.11bgn.  This card will work on 5 GHz with a dual band router/modem?  Namely this one don't know if this link does not work there a

  SBG6580 surfboard cable modem wifi router and
  We have 2 computers, mine is the dell with the above adapter, and the other just has a dongle to 802.11n at 2.4 ghz
  I wondered if mine can be configured to 5 GHz or should I spend too much and just get a cable modem/router which only works at 2.4 ghz.  Just trying to think ahead in case I update my card or if itself gets a new computer, I don't want to have to buy a new router to compensate or wireless card. I think that my laptop is also 801.11n
  Advice?  Its comcast if it's a need to know.  Thanks in advance!
  PS and how does phones work only on EVERYTHING and computers are so limited? (end of the mug shot)

  This wireless card does not work on 5 GHz, 2.4 GHz only.

  Buying a router dual-band (2.4 and 5 GHz) can be useful if other devices, such as a Tablet, can use 5 GHz. 5 GHz will be probably less crowded with your neighbor WiFi networks, but 5 GHz usually has a range of less than 2.4.

  Price is usually why PCs do not come with dual band WiFi. In contrast, the two strips to a phone offers more flexibility when you're out and about. And these days, smartphones can cost more than the average desktop PC!

• My iPhone purchased USA will work in the United Kingdom?

  I'm visiting the United States in a few weeks and I'm looking to buy an iPhone 7 so I'm here, right in saying that it is unlocked, it will work perfectly once I am back in the United Kingdom with my UK SIM card?

  Hello bigbigdan1000,

  Thank you for using communities of Apple Support.

  I understand your message you will buy an iPhone Unlocked 7 while in the United States and want to know if there is work, when you return to the United Kingdom. You will need to buy the T-Mobile or AT & T version of the iPhone in the United States, a GSM model, so he could work in the United Kingdom. Additionally, make sure that you buy the version without SIM card, you are free to use a SIM card from any carrier that provides service for iPhone.

  Country view with taken LTE networks supported

  Best regards

• Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

  Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

  Someone in the building uses Apple can 790-795 network this person hack me and who is?

  Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.