Network management issues

Similar Questions

• configuration of the redundancy of the network management issues

  I have configuration problems: Please see attachment.

  When you take a look at additional information on the adapters, you will find that they are declining.

  I guess that the drivers all went well, but they are down.

  I looked around everywher (I think) to get them to the top, so I can continue my setup.

  I think this will help me solve my problems of configuration.

  Can you tell me how to show my NIC?

  Thank you!

  Hello

  have you checked all cables if they are connected well?

  If Yes, reboot the host and check if the vmnic back!

  MCP, VCP

• I need McAfee or windows manages issues?

  original title: security

  I need McAfee or windows manages issues?

  You still need an AntiVirus tool, but I suggest you stay away from programs McAfee.

  Use Microsoft Security Essentials and Malwarebytes' Anti-Malware . Also install all updates and leave only the UAC active and all is fine.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• DELL UPS Network Management Card firmware update is not possible in the management of inverter DELL Multi console

  I have a problem with the update of some old software on a DELL UPS Network Management card in DELL Multi UPS Management Console.

  We have a few more recent and some models with very old Firmware. The older firmware is: 01.02.0013
  I imported the update of the firmware: 01.16.0001
  If I select this version behind the inverter with firmware 01.02.0013 it is a red exclamation point.

  

  Also, I can't get to the this inverter https address.

  So I do not know how update the firmware of the network management card, please anyone who has a solution...

  .

  I got it finally working.

  I couldn't connect to the interface webGui of UPS in https on IE 6,7,8,9 and calibrated to an ssl error Firefox.
  I could not update the firmware using DELL UPS management software can. fatal error.

  I then installed Chrome, when connecting to the web GUI I ignored the warning of certificate error and waited...

  YES. The web Gui appeared, asking for the password and the Web GUI that I could install the firmware 01.14.0003

  After the update of the firmware in the webgui I was able to upgrade to 01.16.0001 in DELL UPS software Multi management.

  

• Need help, reinstall the killer Network Manager!

  I have recently reinstalled windows 10 home because there was a bug in the windows system file that I couldn't fix.

  Now, I have reinstalled windows 10 and redownload all my files and changed my HARD for one SSD drive.

  But, I searched the web and I couldn't find Killer network manager anywhere and I have also asked people in the Alienware Service on Youtube, but they gave me a link that leads to a Support Dell Alienware x 51 with the Killer Network Manager.

  Then I noticed that there is no link for downloading or a button.

  At the time, I also disabled Adblock and Antimalware bytes...

  Please answer as soon as possible

  Best regards, id9e6osoedk

  Hello

  Try this one if it's Ethernet:

  www.dell.com/.../DriversDetails

  Or even this if this is the wireless:

  www.dell.com/.../DriversDetails

• OpenManage Network Manager does not connect to

  I use the 5.1 openmanage Network Manager to manage the switches PowerConnect 7048.

  I am able to manage/monitor switches using SNMP without problems.

  However when I use telnet/ssh it keeps throwing errors saying "1 has failed to authenticate. Please click here for a list of devices that have failed. "trying to manage these devices by default".

  However the document says what needs to be written to the field ID to enable.

  I got it going!

  There was a problem with ssh on my switch. When activated it works now

• Default gateway and network management

  Hello

  After installing the initial (via a serial cable), we installed the default gateway on iSCSI network. IP address is defined for the management interface on the network of management as well. Now, we want to access different network management port.

  In fact it should really dg on iscsi network as there is not etc to another network for replication. So if I try to change the dg on GUI does not change me. Can I change the dg on cli or add new lines to the management network?

  Thank you

  With a dedicated management port, you have now two bridges 'by default'.   An iSCSI, one for network Mangement.  The iSCSI Gateway is strictly for iSCSI traffic.  All of the management features will use defined for management.

• Cannot Wireless network Management Application

  We use Cisco Wireless LAN Controller 4400 for two years. Yesterday, we had a report that the Wireless does not work. We found that the problem is Cisco Wireless network Management Application does not start. If I try to start it, I get the network Wireless Application Management with Error 1067: the process terminated unexpectedly. I tried to clean boot, but that doesn't fix it. We have not changed anything on the server. Any suggestions?.

  It seems that the firmware is damaged or the compact flash (CF) is dying.

  Have you tried to reboot the device?

  Have you tried to update the firmware?

• Please recommend network management software

  Hello!

  I need help to find a network management software that is compatible with our switches. I use a network with Cisco/Linksys managed switches:

  10xSLM2008,

  5xSRW208,

  2xSRW2008MP,

  1xSF 300-08

  I was hoping there is management software (not the thing webview/web browser), that could do these things (in order of preference):

  -connect to these SNMP (or similar) to show me a little statistics on each port on each switch, as well as the connectivity between these switches.

  -I would like to know which port what mac addresses and possibly the IP addresses of these.

  -Let me know what mac addresses uses more bandwidth

  -ban a mac address

  I'd be happy if someone could give me advice on what software to buy.

  Best regards

  Lars E Fodnes

  SolarWinds NPM - http://www.solarwinds.com/products/orion/info.aspx

• How to remove certain network manager network of political lists

  I want to remove a network manager network of political lists, I have unused network

  

  Hello

  Because the computer is connected to the domain, I suggest you send your query to Microsoft Technet forum for assistance:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Thank you and best regards,

  John

• a restart of the network management will affect virtual on an IBM Blade?

  Hi all

  We are running an IBM Blade S with two blades HS22 located on ESX 4

  I would like to add a HS23 on ESXi 5 and then upgrade all three blades to the latest version of ESXi 5.

  I entered in the console HS23 and put up the name / networking details. When I go out, I get a message saying that the management network will be restarted.

  This restart will affect the virtual running on our existing blades? I have to arrest all of them first? If so it's a little bit of pain

  Thank you

  Tracy

  Network management only affects this network hosts to talk to other guests or to connect, but should not affect all guests of this host or any other host.

• Change of IP network management

  Hi all

  ESXi 5.1.0

  I put VM network and network management in the same Standard switch.

  Now, I want to change the IP address of the management network.

  It will disrupt VM Network?

  Thank you.

  I tested it in my environment and would not distrub the vm network. the host will be disconnected and you will need to re - attach return.

• Configure the network management grayed out in DCUI

  Configure the network management grayed out in DCUI and some other options are grayed out and network management IP is 0.0.0.0

  Seems that you have not any management VMkernel port or they may have been removed. You may need to check the same.

  Run esxcli list of network ip interface to check if there is no VMKernels.

  It does not generate re no output if NO vmkernel port is available.

  If no. VMkernel ports then follow the below to re-create the management VMkernel port group.

  esxcli network ip interface add-i = vmk0 Pei = "network management - M = 'MAC address' ' to create a VMKernel for management." Make sure the right to MAC address of the uplink is mentioned.

  And make sure that it is a unique vmk, does not correspond to a vmk existing (vmk0, vmk1, vmk2).

  Once the Port is created, you should be able to configure networking on the DCUI

  Hope it will be useful.

• How do I restart the network management via SSH?

  How can I go on the reboot of the management network via SSH? Or can I still do. I don't mean services.sh reboot, I need the network management not the management agents.

  Any help is appreciated.

  What version of esxi do you use?

  If you type

  > dcui

  You can control the ESXi in the medium dcui@ssh and restart your agents in there

• Network management using a trunk for the connectivity port

  Hi all

  I'm currently developing a couple of hosts with a unique vswitch esx. Ideally, I would like to allocate 4 physical NICS on the host to connect to my physical network via 802. 1 q trunks. These network interface cards will then be used by some groups of ports for example vlan 10,20 and 30. I also want the Group of ports management network the vswitch using one of/all of these ports of junction for its uplink to the physical network. However, I seem to lose connectivity to the host whenever I put the port network management group vmnic to one vmnic that is attached to an uplink of trunk. If I allocate an uplink access and secure it to the management network port group I do not seem to have everything get to the problem of the host.

  I have to do something wrong as having to use a physical network adapter, mapped to a vlan access, just for hospitality management seems a bit exaggerated.

  Any advice would be greatly appreciated.

  See you soon,.

  CiscoKid

  Hello Ciscokid,

  is not a problem to achieve what you want. What VLAN id you use for the management network? You specify this number VLAN on the portgroup of management?

  Do you have any "vlan native" on the physical switch port?