configuration of the redundancy of the network management issues

Similar Questions

• Configure the network management grayed out in DCUI

  Configure the network management grayed out in DCUI and some other options are grayed out and network management IP is 0.0.0.0

  Seems that you have not any management VMkernel port or they may have been removed. You may need to check the same.

  Run esxcli list of network ip interface to check if there is no VMKernels.

  It does not generate re no output if NO vmkernel port is available.

  If no. VMkernel ports then follow the below to re-create the management VMkernel port group.

  esxcli network ip interface add-i = vmk0 Pei = "network management - M = 'MAC address' ' to create a VMKernel for management." Make sure the right to MAC address of the uplink is mentioned.

  And make sure that it is a unique vmk, does not correspond to a vmk existing (vmk0, vmk1, vmk2).

  Once the Port is created, you should be able to configure networking on the DCUI

  Hope it will be useful.

• OfficeJet Pro 8500: Officejet Pro 8500 A910 - unable to access configuration for the network folder screen.

  I can't access my webpage "network folder Setup.

  I can access my page main printer very well using the IP of the printer.   I click on Scan up fine, I then click on "configuration of the network folder" and it tries to load and then goes to a screen "ERR_CONNECTION_TIMED_OUT".

  He warned me the first time that he has been using HTTPS and I approved that.  I currently records on my printer set up awhile back and they work fine but must modify and add a little more.

  I tried multiple computers and devices with the same results.

  Thank you

  Chris Gaines

  MALVERN, AR

  Hello @Cgaines78,

  Thanks for dropping by the HP's Support Forums! I see that you run into issues trying to set up a folder network for your HP Officejet 8500 A910.

  Please continue troubleshooting here: scan to a computer, the e-mail, the device memory or the network folder

  This aid? You are now able to set up a network folder?

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• "couldn't find any computers configured on the network" on the use of the Dell printer.

  I have a dell v305 printer which worked fine, but now I get a message 'no computer configured on the network' how can I get this fixed? I use the same laptop I always used. If I set up my laptop again how?

  Hi Regina,.

  Please contact the Microsoft Community.

  You have a problem with the Dell printer. I'll help you solve the problem.

  Please see the troubleshooting in the article steps-

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-V305/manuals

  You can also run this fixit as well-

  http://support.Microsoft.com/mats/printing_problems/en-us?WA=wsignin1.0

  Please consult these articles for assistance more-

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-printer-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  We know if this helps solve your problem.

• How do I restart the network management via SSH?

  How can I go on the reboot of the management network via SSH? Or can I still do. I don't mean services.sh reboot, I need the network management not the management agents.

  Any help is appreciated.

  What version of esxi do you use?

  If you type

  > dcui

  You can control the ESXi in the medium dcui@ssh and restart your agents in there

• JOINT-2: Tips for the initial configuration of the network?

  Hello team:

  I was asked to do a very basic configuration of a whole new JOINT-2 on a CAT6500. According to the documentation, once in the Supervisor´s CLI, I run a 'session' command to the location where the METHOD.

  Once, I follow the wizard to add the IP, mask and gateway. Having this configured, the management interface of module´s should be visible from the rest of the network, but I do not see how this happens, because the module must use one of VLAN switch´s and I haven´t found how it is configured.

  Question: how will this link JOINT itself for layer 3 engine switch´s? I don't see how its layer 2 will correspond to any VLAN available in the host LAN switch...

  Any help will be greatly appreciated

  Rogelio Alvez

  Argentina

  I think what you need to add a command on the 6500 that puts management of JOINT-2 port in a vlan individual.  For example:

  intrusion detection module 9 management access port - vlan 101

  This places the management for the joint-2 card port 9 slot vlan 101.  The host IP that you set on the map of JOINT-2 itself then be valid for that vlan.

  Steve

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Cannot install "analysis to the configuration of the network folder.

  I have a HP Office Jet Pro 8600. I'm a network using a router and an ethernet cable. I am connected to a laptop running Windows 7 IBM. Printing works fine on the network. Scanning works fine on a USB device. My problem is when you try to configure the scanning of documents to a network folder. When I run 'save and test' I get the following error...

  Error. Your printer cannot connect to the server. Press 'Back' to correct the server name and address. Make sure that the network discovery and file sharing are turned on. These settings are in the network and sharing settings in the Windows Control Panel on your computer.

  The directory is not set to read only.

  The network discovery and file sharing are turned on.

  I'm not using Norton Antivirus.

  Can anyone help?

  NJU salvation,

  See pages 53 & 54 of the user guide.

  http://h10032.www1.HP.com/CTG/manual/c03026243.PDF

• OfficeJet pro 8600 + scan if there is no configuration for the network folder

  The printer is wireless to my router and I connect to a computer connected to the router with an ethernet cable.  The computer is running Windows 7SP1 Home Premium 64.

  During the original installation of the printer 3 days ago, I used the wizard set up 'scan to a network folder' a record 'scans public '.  He created the 'profile' correctly and worked well the first time I scanned (I scanned the 3 or 4 times with different tweaks to experiment).  However the next day it no longer worked error on the printer was, 'could not connect to \\Computername\Public scan. Check that the remote computer is on. "Obviously, the computer was on, some communication problems only happened from one day to the next day, he was sitting unattended.  Hmmmmm.  Note that the option "Scan to Computer" works very well, so communication is simply no "scan to network folder" option and I really want to scan to a network folder.

  I went in a private "Scans" folder on my account and created a share as 'DadsScans', creating permissions and following all the tips I've come across so far.  Then I tried many times with the wizard to create a new configuration in the profile and all have failed and yes I found the network and turned on file sharing.  Also remember that it worked fine the first night?

  I tried to enter the local path to the folder (C:\users\dad\My analysis) with a share name (DadsScans), but the error message after choosing the option "test and save" was, "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Setting is not saved. »

  I then tried to enter the share name directly in the path of the network folder, like "\\computername\DadsScans", but the error was "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Make sure that network discovery and file sharing are turned on... "Note, I also tried,"\\computer Address\DadsScans IP"and got the same error.

  Finally, I disabled my firewall and my anti-virus in real time and tried again and got the same error messages.

  Once again, my network discovery and file sharing are on and it worked fine the first time I've used suggesting that everything was fine.  What happened during the night, so that the printer and computer sitting idle?  I've changed NOTHING!  Any suggestions would be greatly appreciated!

  Well well, after several hours of attempts to solve the problem, the 'light bulb went on!  The night after that I configured the "scan to network folder" option, we had some difficulties with our network so I reset our modem and DSL router.  Who cleaned the problems of network with devices.  It is apparently broke something with the communications between the scanner and the computer.  A simple re-start the computer tonight and wa - la, the original public scan I configure worked again and I could create new profiles of "scanning to '!

• Configuration of the network hosts 4ESXi

  Hello

  I have 4 ESXi servers and each server a 4x1Go NIC. What is the best practice when it comes to setting up the network on that.

  This is a good configuration:

  Physical switches: here I configure ports on physical 4-port trunking. ?

  Configure the virtual switch tagging. I create 2 vSwitches and one switch for vmotion and console a vSwitch for production

  On the vSwitch, I guess I should create 3 groups of ports (console, vmotion, production). Should I create each one on the VLANs separated, or

  I could use 1 vlan for console and vmotion and 1 vlan for the production?

  And how do I configure the nic teaming inside the vSwitches? I mean you have a lot of solutions such as network failure detection, load balancing and so on...

  I also noticed some active active say on network cards, and some say active liabilities?

  For more information, the storage is connected with SAN Fibre. I suppose that us will run between 15-25 vms

  All good catches of screens or documentation that shows the connection created in step 1 to the last would be good.

  Hi Andreas,

  your configuration looks fine to me. the configuration of VLAN depends on your condition.  and come to nic teaming it depends on the number of active uplinks if you have two active uplinks its ok (I mean you ask next set active assets not kept by assets and the other in standby (passive)).

  the NICTeaming - options, you can refer to http://www.vmwarearena.com/2014/02/vsphere-distributed-switch-part-19.html of load balancing

• a restart of the network management will affect virtual on an IBM Blade?

  Hi all

  We are running an IBM Blade S with two blades HS22 located on ESX 4

  I would like to add a HS23 on ESXi 5 and then upgrade all three blades to the latest version of ESXi 5.

  I entered in the console HS23 and put up the name / networking details. When I go out, I get a message saying that the management network will be restarted.

  This restart will affect the virtual running on our existing blades? I have to arrest all of them first? If so it's a little bit of pain

  Thank you

  Tracy

  Network management only affects this network hosts to talk to other guests or to connect, but should not affect all guests of this host or any other host.

• How to set up/configuration of the network on virtual servers?

  We just bought the license for vSphere with two processors. I will put up at least three virtual servers on that host computer. Can someone point me to an instruction step by step on how to set up the network so that each guest operating system will have their own unique IP address and/or MAC address? The server is an HP Proliant DL380 G7 with two NIC standard more map of the ILO.

  Any suggestion is appreciated.

  MAC address of the virtual machine is generated by ESXi host when you first power on the virtual machine and the IP address will be assigned by an existing DHCP server or you can configure it manually. Regardless of the implementation of a server as a virtual or physical machine, you generally EF static IP settings to a server system.

  André

• Configuration of the network card for my installation

  Hello

  Host machine: Windows-7, wireless, wired network card network card

  The computer invited: Oracle Linux 6.1

  I want to install oracle on my guest computer database and access it from the host machine. I do not particularly like about sharing this database with all other machines in the network (other than the host and all guest computers created on this server).

  What network card configuration would work better for me?

  My host computer is a portable computer. I plan on using this laptop at home, as well as the work. At home I have access to the wired network and wireless (DHCP) while at work I have access only to wireless (DHCP) network.

  I tried to adjust my VM as NAT & Host-Only network. My VM guest Gets the IP address but I cannot ping the virtual machine to the host using machine VM name. If I use the IP address of the virtual machine to ping, it works.

  Thank you

  Yogesh

  Welcome to the community,

  with the requirements you mention, I would recommend a host-only configuration. Due to lack of DNS resolution, you can configure the host with a fixed IP address in the Host-Only range and add the Oracle VM to the hosts of your Windows system file.

  Use a fixed IP address between 192.168.x.2 and... 127, above this addresses are used by DHCP.

  André

• Configuration for the Task Manager error

  Hello
  
  I installed FDQM, IR, FR, HFM in 11.1.1.3.
  
  FDQM configuration is successful. When you configure the Task Manager using the user name Windows account
  
  (Administrator). But it shows the status parameter not valid error. Once again, I tried with DCOM user admin also.
  
  It throws the same error.
  
  Thanks and Rgards,
  Sidhartha.p

  Try this:

  (A) start > run > services.msc
  (B) locate the FDM Hyperion Service Task Manager, right click and choose "Properties".
  (C) click the 'Connection' tab and enter the FDM Service account user name and password as - and apply.
  (D) try to start the service.

  It work?

• Changing the MAC address of the network management

  Hello

  We have 2 servers ESXi 4 in our network. We do not know why, but both have the same MAC address on the network card virtual for the management network. That's a lot of problems with the connectivity of one of ESXi servers.

  Is it possible to change the MAC address?

  Best regards

  Robert

  Removal and addition of the vswif of the service console should generate a new MAC address.

  esxcfg-vswif - l

  Note the detail.

  esxcfg-vswif vswifN d

  where N represents the number of vswif, d Deletes

  esxcfg-vswif - a n-i < IP > < vswifN > < portgroup > Pei, netmask

  is the command to add a new vswif, even when N is the number of vswif.

  Simon