Network method available!

Similar Questions

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• Encriptación methods available in Oracle

  Hi Experts,

  I'm in a Bank project where not the IPN (Non Public Information) as ssn, DL must be encrypted, please let me the industry standard encryption methods available in oracle.

  Kind regards

  PAPI

  You can hide the administration system data by encrypting tablespaces in 11G, so the system of administration will not be able to see the binary content of the data files, even if there of filesystem privilege that is not good to give system for untrusted users administrator privileges.

• Simple method to check if the network is available to open HttpConnection

  So I read around, and I found that you can not change the time of 2 minutes by default for HttpConnection, and you should check to see if a connection is available first before attempting to connect. I tried almost everything I can think of, and I can't imagine it being more than a few lines of code. Here's what I do. He never thinks that a connection is available. Haven't tested on a device.

  //TODO: Determine if this works on a device!
  if(DeviceInfo.isSimulator()){
      if(!CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_MDS)){
        xmlParseProgress.processError(ObserverInterface.ERROR, "No Connection");
        return false;
      }
  } else {
      if(!CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT)){
        xmlParseProgress.processError(ObserverInterface.ERROR, "No Connection");
        return false;
      }
  }
  
  //http = (HttpsConnection)Connector.open(url+GlobalVars.getConnSuffix());//etc
  

  Can someone give me the code that works?

  Thank you!

  That's what I'm use to check if a connection is available, hope this helps someone:

  public static boolean canConnect(){
      return !(CoverageInfo.isOutOfCoverage() ||
              RadioInfo.isDataServiceSuspended());
  }
  

• Hello I have a Sony Bravia KDL - S2XBR9 55 "TV. The Sony entertainment network is available on this?

  Hello I have a Sony Bravia KDL - S2XBR9 55 "TV. Is available on this model Telivision Sony entertainment network. Appears as an update the firware, or it would be possible to push, already a lot of available Internet content?

  Hi Toyster,

  Unfortunately, the XBR9 doesn't have the Sony entertainment network. SEN content is available on 2010 units and more. Sony SMPN100, SMPN200, NSZGT1 and NSZGS7 will have the content of SEN. You can connect these devices to the XBR9 TV with HDMI and you will be able to access the content of SEN.

  If my post answered your question, please mark it as an "acceptable Solution".

• WRT610N - no network is available on the Windows XP laptops

  Just installed a WRT610N router and I'm typing this from my wireless MacBook and everything seems to work properly.

  However, I can not detect with two other laptop Windows XP network available. The two bands of SSID is enabled.

  The two bands are on 'auto radio bands' and 'mixed network mode ". I suspect a setting (not) to be checked / changed. 5.0 GHz band is WPA and WEP is 2.4 GHz band. I could at least see / detect one of the strips?

  I can work wireless after working cables. Somehow, the parameters are downloaded in this way. I have installed all the drivers which always however on two laptop. Does anyone know how to detect the wireless network and how to automatically connect to it? Thank you

  OK, problem solved:

  -Both bands: mixed

  -Both bands: 20 Hz

  -only one channel per band

  -SSID: enabled

  - and LELA UNINSTALLED.

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• Networks not available in Org vDC

  Hello colleagues!

  Please help me - I have a problem with the networking in vCloud Director.

  When I try to specify grouping of network when creating organization vDC, it shows the empty box

  I created pool network before, but it is not available in this dialog box.

  Also I see some strange things: when I created provider VDC and pool network selected, it shows me all the available networks

  

  When I created the pool - he also showed me that this provider VDC has not all available networks

  So I try to create the network of the Organization, and even once it does show me all available pools

  However, when I uncheck the box, it shows me my stock of network and I managed to select. But when I go inside the Organization and try to create TIME here, I see no network available

  

  When I try to create the network here, it says me that "vDC for the VAPP doesn't have network resourses.

  And TIME does not start with error "associated with this paralytic vDC is not required network resourses.

  I have read in vCloud admin guide - "you can deselect use networks accessible only by the organization check box to display the outside networks and network pools which are not currently available from in the Organization through its organizing committees."

  But please give me any idea - why network pool cannot be available for the VCC org?

  What should I check first?

  (The connection of the VCD to vCenter and vShield manager was a success, VCD agent is properly installed on the host computer. Data store is visible).

  Thanks for any idea!

  First screenshot shows you have no network at all pool, either you have a pool of network, but it is not available for the selected provider VDC. For example, if you create a VIRTUAL LAN or network supported by VCDNI pool, then the vdSwitch for the pool of network must be accessible by the servers of the provider VDC you selected for org VDC.

  ekiselev wrote:

  Hello colleagues!

  Please help me - I have a problem with the networking in vCloud Director.

  When I try to specify grouping of network when creating organization vDC, it shows the empty box

• Methods available for the storage of custom measurements

  Just a general question.
  
  With the help of 11g. If I have a complex program of DML, which calculates the values using the existing measures stored in the cube and want to store the final result of the values calculated during the delivery of my program. What methods are available?
  
  My program must be run under the DBMS_CUBE package, part of a maintenance script? I appreciate any info on this.

  $LOOP_VAR is the name of a VARIABLE that is the basis of the loop. A simple example if your DML formula is

  SALES * 100
  

  $LOOP_VAR must be 'SALES', because ' SALES * 100 "has a value if and only if the SALE has a value.

  $LOOP_DENSE allows you to specify that one or more of the dimensions of the $LOOP_VAR should be closed densely even if they are not dense in the variable itself. This is useful for calculating the time of series which may have values even when the base variable does not. The simplest example is a DML formula which means "year to date SALES." (I won't give any real OLAP DML for this because there are many formulations and it would only mask the issue.) Now, let's assume that your variable base, SALES, has a value for Jan 1, 2012", but for any other day in 2012. If you simply set $LOOP_VAR to be 'DIRTY' and then 'year to date SALES' would be NULL for all other days in 2012. It is clearly false from a commercial point of view. The solution must also set '$LOOP_DENSE' to 'TIME', where TIME is the time dimension. The formula now return values for all the days in 2012. You can think of this in terms SQL as an outer join partitioned between the $LOOP_VAR 'table of facts' and the $LOOP_DENSE 'table dimension.

  SELECT ...
  FROM
    sales_fact
      PARTITION BY (...other dims..)
      RIGHT OUTER JOIN time_dim
      ON ...condition...
  

• Portege R700: How turn off WLAN when the connection to the local network is available

  Hello

  I am the owner of Portege R700, with Windows 7 x 86.
  I want to find a way to disable WLAN automatically when I plug Ethernet.

  I tried to enable the following setting:

  "Device Manager", "Network Adaptaters", "Broadcom 802.11n", 'Advanced', 'Disable on cable connection' = enable. "

  But it does not work. Do you have another idea for me?

  Thank you in advance.

  Hello

  I think that to do this automatically, you should not use certain software/tools for part 3.
  Looks like applications BridgeChecker or protective Wireless does this job very well.

  Check that a feedback would be appreciated.

• Can't connect to WIFI on all locations where the WIFI network is available

  Sometimes my computer will connect and detect the networks without wire, Hotels, airports etc. but do not work in the home and in some offices.

  I run put WXP updated with SP2 have an Artheros5005gs adapter. Any ideas?

  Hello

  It is a matter of compatibility between the WLan router and wireless network card.
  If the wireless network adapter does not support the same Wlan standards then you will not be able to establish the WiFi connection.
  Especially the hotspots (Wlan on airports, city, etc.) are not secure and that is why the laptop automatically connects to these wireless LANs.

  The WiFi network at home or in the office is secure for most and you need a right encryption key to connect to these wireless LANs.

  So I think you should check you settings router WLan configuration and usage of encryption right key, SSID, etc.

• Windows 7 computers suddenly not authentic on a network not available at the internet.

  I have a secure network of approximately 20 workstations Windows 7 in a Windows AD domain. No internet access for workstations. However, I have a Windows Server 2008 R2 that provides Microsoft patches to workstations running up-to-date. The server is in a demilitarized zone that is connected to the internet.  Patch has been uneven before about 6 months when the WSUS server has been implemented. All patches were made by hand.

  All my copies of Windows are legitimate and have been good for about 2 years.

  My problems begin when my users get a pop Windows Activation window saying "to continue, you must log on by using an administrator account.  They hit ok and the background turns black with the Windows 7, Build 7601 this copy of Windows is not genuine.

  To troubleshoot, I logged in as an administrator and made the phone with Microsoft activation.  Works very well for about a week, and the cycle starts again.  Genuine Windows license shows diagnostic tool invalid, code validation 50 prior to activation of the phone and shows 'real' after activation.

  Of course, I installed an update at some point requiring a reverification of the activation.  A lot of internet messages telling you how to eliminate the real control. However, I would like to be able to update my workstation with all the patches.

  Microsoft support suggests that I have rename the token.dat and register with Microsoft again. I did this and still have the same issues.

  Anyone have any ideas?  I can't be the only one trying to maintain Windows 7 workstations with patches to update on a secure network.

  You need to buy a new copy of Windows for all computers in a network and the overall costs could easily far outweigh the benefits. You need on the advice on site if you wish to continue as an option. This topic is beyond the scope of this forum. The forum is dedicated to helping users at home.

• New virtual machine retains boot from the network (not available)

  Dear community:

  I'm trying to boot and install from an image ISO of Windows 95 file that I created from the original CD.  VM Ware Workstation 7 continues to try to boot from the network even if I have the boot order in the BIOS configured to boot from the CD - that didn't work.  And if it is set to boot from an iso file it will automatically launch that file instead of looking for a MAC address in an infinite loop on the network.  How can I solve this problem with my boot?

  Sincerely,

  Markerline

  the CD should appear as D:

  so type D: to the prompt - then it has to go to D:

  type dir to find the Setup program

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Lenovo K900 issues network (not available)

  I have a smartphone Lenovo K900, purchased in Jan 14. Recently, it has developed a problem where, if someone calls me, they get a reply not accessible. After a few hours, I get messages I have xx missed of all who have tried to call. If I reboot my phone, it works very well for a while, and then the same problem occurs. I don't want to keep restarting my phone to fix this problem (even restart does not work sometimes). Is this a known problem with this model? How can I solve this problem?

  Recently, I changed my SIM card and that solved the problem. My SIM card was apparently 32K, which was told is old technology. I bought a 64 K SIM and have no problems so far. Thanks for all the help anyway.

• Banner advertising generating the error "Flash files with network methods are not allowed."

  SWF files created in Falsh CC generates this error. No one knows how to fix?

  Click file > publishing settings > avancΘs as3 (the wrench) > and change the default link to "merged into code".