WRT610N - no network is available on the Windows XP laptops

Similar Questions

• "Another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Please, anyone can help as I don't know what to do? I am running Vista to the Windows Welcome page
  I am the administrator and I have no other computers attached to my laptop?
  I use the same USB port to connect to internet, but recently, I had to try another USB port I get the above error message.
  I have no idea how to do to correct the situation and would appreciate guidance step by step.
  Thank you.

  Hi RDCICON,

  1. which device you are connected to the USB port?

  2. you still get the same message when you connect the usb device or use the device on another computer?

  Method 1:

  You can try to run the tool built into Vista Network Diagnostics. To do this, click Start, go to network and select network share.

  On the left side of the window select the diagnosis and repair.
  It should help to find which device is listed with the duplicate IP address.

  Method 2: Release and renew the IP address by following these steps.

  a. Click Start. Click Run, type cmd, press ENTER.

  b. at the command prompt, type the following command and press ENTER

  ipconfig/release

  ipconfig / renew

  Method 3:

  Check and confirm the DHCP client service is started and set to automatic.

  If the DHCP client service is not running, then set it to autostart. Steps to set the auto service:

  a. click the Start button

  b. type services.msc in the search box.

  c. search for DHCP client and set it to automatic and make sure that it is started.

  Method 4:

  Reset the router and see if the problem persists.

  You can refer to the 3mentioned of general troubleshooting method in the following article to reset the router.

  http://support.Microsoft.com/kb/956196#Gm3

  You can also see the producers of the router manual or contact support for additional assistance.

  Hope this information is useful.

• Windows 7 computers suddenly not authentic on a network not available at the internet.

  I have a secure network of approximately 20 workstations Windows 7 in a Windows AD domain. No internet access for workstations. However, I have a Windows Server 2008 R2 that provides Microsoft patches to workstations running up-to-date. The server is in a demilitarized zone that is connected to the internet.  Patch has been uneven before about 6 months when the WSUS server has been implemented. All patches were made by hand.

  All my copies of Windows are legitimate and have been good for about 2 years.

  My problems begin when my users get a pop Windows Activation window saying "to continue, you must log on by using an administrator account.  They hit ok and the background turns black with the Windows 7, Build 7601 this copy of Windows is not genuine.

  To troubleshoot, I logged in as an administrator and made the phone with Microsoft activation.  Works very well for about a week, and the cycle starts again.  Genuine Windows license shows diagnostic tool invalid, code validation 50 prior to activation of the phone and shows 'real' after activation.

  Of course, I installed an update at some point requiring a reverification of the activation.  A lot of internet messages telling you how to eliminate the real control. However, I would like to be able to update my workstation with all the patches.

  Microsoft support suggests that I have rename the token.dat and register with Microsoft again. I did this and still have the same issues.

  Anyone have any ideas?  I can't be the only one trying to maintain Windows 7 workstations with patches to update on a secure network.

  You need to buy a new copy of Windows for all computers in a network and the overall costs could easily far outweigh the benefits. You need on the advice on site if you wish to continue as an option. This topic is beyond the scope of this forum. The forum is dedicated to helping users at home.

• Query related to the availability of the Windows XP SP2 CD

  Original title: XP Pro problem

  Is it possible to get a cd of Service Pack 2 for Windows XP Pro?

  Hello MGoodwinXW,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it seems that you are having problems with Windows XP SP2. As I understand it, you need to know whether or not the Windows XP SP2 CD is available.

  Unfortunately, there is no availability of the CD of Windows XP SP 2.

  Download and install Windows XP SP2 link and verification.

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=28

  Answer to us if you are having problems with Windows XP SP2 or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• How can Aa2.0 I transfer available to the windows...

  The new monster machine has been delivered and I'm working on setting up;

  > Dell Precision Workstation T7400

  > XP-64

  > Double Socket, dual Quad Core Xeon

  > 8 GB of DDR2 RAM

  > 120 GB SSD C:\

  > 320 D:\  [WD 7200 RPM]

  > 320 E:\  [WD 7200 RPM]

  > 320 F:\  [WD 7200 RPM]

  > SB X - Fi Xtreme Music [WDM] sound card

  (They ultimately want to be able to do video work also are why I got this ordered monster)

  However, I don't want to spen the next 6 days setting up AA2.0

  is there anyway to transfer the settings window of the presentation of an AA2.0 install on a new,.

  the first run page layout is much too adverse for what I use it for

  I tried searching but nothing relevant has been featured in the results

  all I want is to have closer look at AA1.0 as possible

  which I already managed to do on my machine at home

  and the previous (old machine) install here

  However, I'm not kidding when I say it takes 6 days to implement as I want

  just try to move the indicator at a lower level of the main window and above the rest

  is almost impossible, he'll always behind or in front of the main window

  make a huge useless 1000Px x 800Px wide big indicator of level (screen resolution 1152 x 854)

  or it appear behind or in front of one of the other small windows

  Here is my configuration:

  Change the display:

  1 > regular toolbar (not hybrid)

  2 > main window

  3 > the transport controls

  4 > time window

  5 > zoom controls

  6 > selection / see position indicator

  7 > level indicator

  8 > I float the Cue list & open only when I need it.

  Here's the AA1.0 on this machine

  Not running the other machines AA2.0

  I'll post my layout of the window AA2.0 later (when I fire tomorrow)

  

  A Ω

  You can copy your old workspaces to the new machine.  In Windows Explorer, go to C; \Documents and Settings\\Application Data\Adobe\Audition\2.0\ and copy the folder UserWorkspaces to the equivalent location on your new computer.  Hearing of launch and work areas should be available in the Menu dropdown.

  Durin

• Performance diagnosis is not available in the Windows Server 2008 Event Viewer

  In Event Viewer, I can see the Microsoft-Windows-Diagnostics-Performance/operational under Windows 7 but I couldn't get under another computer running Windows 2008. Is it possible to allow that?

  Hello

  Your Windows is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How do reset you available to the windows ide?

  Hello
  
  I dragged a few pieces of the ide and move them around on the screen, but if I want them back where they used to be, how I do?
  
  By pieces, I mean the window of the application, the window of the structure and so on. So now my IDE is both of my screens. But if I need to work on 1 single screen, how to make all of my windows back where they used to be?
  
  Y at - it a shortcut to do this or do I have to drag each rear window one by one?
  
  I am currently using jdeveloper 11.1.1.0.0 on windows xp
  
  Thank you

  You can try this solution:
  http://blogs.Oracle.com/Shay/2006/11/where_did_that_jdeveloper_wind.html

• HP Envy 5640: HP Envy 5640 how to connect to the Windows 10 laptop

  Hello.

  I hope you can help me, I have my new printer all set up with my office and it works perfectly, (Windows XP) but I recently bought a new AcerAspire 17 Windows 10 laptop and have tried to connect my printer.

  On my laptop, I went to add devices/Printers and he picked up my printer but it asks me to put a WPS pin, he says that it is in the information that I had with my printer, but I've looked everywhere and I can not end or see anything related to the WPS pin code.

  Please help me.

  Thank you very much

  Sincere wishes

  Barbara

  Welcome to the HP community @BarbaraJean1,

  I read your post on the questions that you face when you try to connect your 5640 desire computer Windows 10 via your wireless network, and I want to help!

  I suggest trying the method of configuring wireless, or USB wireless to set up the printer. Check the link I posted for you to see your options and how to properly connect the printer.

  Setting up the printer on a wireless network for the HP ENVY 5640 and WANT 5660 e - all-in - One Printer Series

  Please let me know the results of all the steps, and I will do my best to help you further, if necessary

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

• Wireless keyboard Apple ceased to connect to the Windows 7 laptop

  I bought an Apple Wireless Keyboard 3 months ago and it works perfectly with my Windows 7 laptop until today - to halfway through editing a word document, it stopped working and my laptop makes the sound as a USB is plugged or removed.

  While I tried to remove the device and add it again. Several times. No luck. Then I deleted the device, rebooted the computer and re-added. Still no luck. Whenever I added, it brings to the top of the screen to enter the pairing code and that everything goes well and it appears in the printers and devices window. But it is grayed out, as if it was there but not there.

  I tried new batteries, but it made no difference. The keyboard still works perfectly with my iPad.

  When I turn on the keyboard, it displays a green light that blinks twice then pause then blinks twice again on repeat (according to the Apple Support Online, it's the device is detectable signal).

  I've also updated all Bluetooth drivers on the laptop, but displayed as up to date.

  Of course, Apple in charge cannot help me, and phone support from Microsoft could not be.

  Any suggestions? :)

  Hello

  Maybe there is an updated driver for the keyboard which caused the stoppage of work,

  If you go to the start menu and type "devmgmt.msc" into the search bar, it will bring you to the Device Manager.

  Look for the device in the list, it must be under keyboards, but because it seems to not be recognized, it can be in the tab of the unknown devices.

  If you cannot find the device, right click and select Properties, then go to the driver tab.

  From there, you can try to roll back the driver if this option is available, or update the driver to see if you can get a working one.

  Another thing to do in Device Manager is to click with the right button on the computer on top of the list, then choose the "Scan for hardware changes" and there may be for the device as well.

• Pavilion 15 laptop: as the Windows 10 laptop upgrade will not close or wake

  Hello

  Since the upgrade to Windows 10 my 15 Pavilion has acquired two new problems:

  1. It will not wake from sleep and requires a hard reboot to get it going again.
  2. When stopped down, the lights of the power and wifi stay and a hard stop via the power button is necessary.

  I tried various fixes suggested in the Microsoft forum without success.  HP Support says there is no update for my laptop.  This issue is driving me crazy and I am very disappointed that HP seem so little to help.

  The details of my machine are:

  Product number: F8S59EA #ABU

  BIOS: F.67-11/26/2014

  Can someone please help?

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
     • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
     • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
     • In Control Panel, select administrative tools, and open Services.
     • Go to Windows Update and double-click it to view its properties.
     • Click on stop to stop the service to run.
     • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
     • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• WRT54G can not block the Windows 7 laptop

  Use the page Access Restrictions in my WRT54G Router, I am unable to block my Windows 7 laptop, it of MAC address, either by its static IP address.  I have IPv6 disabled in the configuration of the wireless adapter.  However, the laptop is able to access the Internet as if there was no access restriction.  It is the only Windows 7 workstation in the House and the only workstation that I can't block access Internet using Access Restrictions in the router.

  Any ideas would be greatly appreciated.

  The router is a WRT54G v4, which is essentially a WRT54GL.  I've updated firmware to 4.30.13 4.30.5, and that solved the problem.

• No active network adapters found in the Windows Task Manager?

  My laptop under WinXP SP3 does not connect to my wireless network. It worked fine until 3 weeks ago. The laptop thinks it is connected to the network but when I look in the Manager of tasks, and it sees no network adapters. I changed my wireless network card, tried another router, reset WINSOCK (winsockfix), scanned for malware with windows-kb890830 - v4.3(nothing_found) and nothing seems to help. Everything else on the computer seems to work very well. I don't have a windows boot disk to reload windows (mobile bought refurbished didn't come with the disk). Can anyone help? It would be greatly appreciated.

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Your network adapter does not work and Windows XP does not include a Compatible driver for the network card

  http://support.Microsoft.com/kb/315275

• Network key/password on the Windows XP program does not?

  I am trying to reinstall/repair my windows XP program and run on Parallels, but for some reason any the network key/password I provided for the CD does not work this time?  These things expire after a while that I didn't take my purchase since installing it 4 years ago.  Any help is appreciated.  Thank you

  Hi Kim,

  Are getting you error like "the product key used to install Microsoft Windows isn't valid? If Yes check out: http://support.microsoft.com/kb/883254.

  I hope this helps.

• Adding network XP Pro via the Windows 7 workgroup printers

  Hello

  I have a Windows 7 Pro task force put in place.  I would add a XP Pro machine on the working group.
  I think I have the CPU of the XP Pro as a member of the working group.
  If I want to add a network printer must stand alone for XP Pro, be shared on the task force 7 Pro?
  I don't see any of my network printers stand alone on XP Pro.  I currently do not them marked as shared in Windows 7, as they then appear with multiple variations of their name on the network.
  Thank you
  AS

  If by a "network printer stand alone ', you hear a printer connected directly to your network or cable or wireless Ethernet is not uncommon that he would not find while browsing the network.  AND the pilot didn't need (and in general should not) be shared through another computer.   Possible but causes a slower printing and less reliable work is been put on hold through this machine and not sent directly to the printer.
  You need to install the XP driver on the XP machine.  Most of the OEM installation programs will search the network printer at that time here.   I generally prefer to use a static address for Ethernet printers that can be seized if necessary and tends to be more reliable.

• The Mobile link is available on the Windows Phone devices?

  Hello! I have a Windows Phone and that you have installed Adobe Reader. I would use Mobile link to access my PDF files on my phone, but I don't see anything in the settings to enable this feature. I logged into my account on the phone and activated the Mobile link on my computer, but when I go in the "recent files" tab on my phone, nothing appears. Does anyone know if it is even available on Windows Phone? Or maybe if I missed something?

  Hi Victor,

  No, it is not available on windows phone devices again.

  Kind regards
  Rahul Tyagi