Network problem Windows 7

Similar Questions

• Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

  Hi all!

  I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspx

  But I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
  Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
  KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
  KdInitStatus value is "c00000b5".

  I tried:
  -change of hardware to 9 version
  -change the comments to e1000 Ethernet card
  -disable the DHCP (debugger comments must use APIPA)
  -change the type of connection (bridge NAT, host-only)

  and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
  But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.

  Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?

  Thank you!

  Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.

• Network problem Windows vista and Mac computers.

  Original title: cannot share the file, help!

  Hello.

  I just got a macbook the other day, the mac was pretty easy to understand how to set up for file sharing. It is installed on my pc and that you can view the files mac very well. However, I can't the PC to share files on mac to save my life. I didn't actually work earlier pretty ok, just read a comment online, but then the mac has had a problem with a hard drive so they just replaced with a new computer. I had the same model. I'm not sure what I'm doing wrong. As he asked a username and password for my PC to connect and view files (so I thought a lot of outside). I entered the same username and password for PC information, I entered earlier (several times), and it wouldn't work. I tried to enter my information to connect PC and it wouldn't work. I tried implementing new user names to add to the permissions and it would not work to connect on the mac. I tried to disable the password protection all together on pc and it still does not either. I know I entered the data correctly, I tried to work 3-4 hours... I'm a little confused, because it worked pretty quickly earlier and I did the same thing.
  What can I do? I'm doing something wrong? Any help that anyone can give is GREATLY, GREATLY appreciated! Thank you!!! :)
  Hello
   
   
  Follow the below mentioned article and see if that helps:
   
  Mac OS X: how to connect to files Windows (SMB) sharing
  http://support.Apple.com/kb/HT1568
   
  If the article above is not enough, there will be some settings on a Mac computer need to change, then you can contact Apple for additional assistance.
  Here is the link: https://discussions.apple.com/index.jspa

• 2 computers on an Ethernet network directly windows 8

  I want to connect to my backup PC directly without running into my router (my PC has two network adapters)

  Plenty of info out there to do this on win7 and vista, none for win8.
  I connected the 2 together and in network and sharing Center and I can see my original network and the 'network unidentified' - Public network
  Connections: ethernet.

  Hello

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• C:\Windows\diagnostics\system\networking 0x800700C1 Windows 8?

  C:\Windows\diagnostics\system\networking
  Error codes: 0x800700C1
  Source: engine
  User:
  Context: restricted

  I've heard of this on Windows 7, but it happens to me on Windows 8 once I have updated very ironic that after I updated I can't not be updated not more each time I tried an error code comes from the error (S) found: Code 80073712 and this update I'm trying to do is update Microsoft.NET Framework 4.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2805227), but after I installed optional updates, all went to the chaos I can't run the problems on my Internet nor can I update so what can I do else? Ah yes... I have an Ethernet cable plugged and that seems to work except that I can't use Troubleshoot on it says Ethernet IPv6 connectivity cable: access no. network which is the second line, that of the top IPv4 connectivity is: Internet Modem hook up is not nearly this PC I him have already picked up and restarted the Modem , he showed on this PC there is no victory to Internet I tried to click to see if troubleshooting arise it won't let me not used so I don't no idea that continues, but I JUST refreshed this PC because Norton went a little wacky on me and made me re - new buy > _ > an error code showed a victory , I tried to update and I had refreshed this PC, now I have this good with it I really don't want it réactualisiez

  Hi Asukari,

  Thanks for the detailed description of issue.

  Here are some ways you can follow to fix the problem with Windows update:

  Method 1:

  Check out the link and follow the steps in the article under the heading Windows 8:

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/957310

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Method 2:

  Try to install the update manually in clean boot mode and check:

  Check out the link to place the computer in clean boot mode:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

  See the link to download the updates manually:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=38879

  Also check out the link if you have problems connecting to the internet.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem? ___

  Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
  I have also recently set up a wireless network.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Network problem after installing some windows updates

  My knees installed this windos updates automatically.

  kb2656351
  kb2572078
  kb2539636
  kb2533523
  kb2518870
  kb2478663
  kb2468871
  KB2446708

  kb2656351
  kb2533523
  kb2487367
  kb2468871

  to restart windows 7 I lost my Internet and I can't work in my network?

  Can you help me solve this problem?

  Hi Perseomarin,
   
  1. what happens when you try to connect to the internet?
  2. you receive an error message related to an Internet connection?
   
  I suggest you to follow the steps and check if it helps.
   
  Method 1: Run the network troubleshooting and check if it helps.
  Troubleshooting network in Windows 7 using
   
   
  Method 2: Follow the link and check if that helps.
  Windows wireless and wired network connection problems
   

• Windows 7 network problem (network computers and devices slowly filling)

  When I started > network, the list of devices fills very slowly.  A loading bar going across the top for about 30 seconds to a minute and devices do not show up until the bar is almost completely through.  Must not fill as they are discovered... and why is taking so long?  Also navigation within folders my network is just as slow and large file transfer is slow as well.

  Thanks for your time,

  Matt

  Hi Matt,

  Every time that you open the network list, Windows is designed to rescan the network for devices. Unfortunately, this is normal and there is not much I can do to change that.
  Of course, plenty of time to detect devices and transfer files can definitely be caused by the type of network. You are currently connected via a cable ethernet or WiFi?
  Also, try to update the drivers for your network card and see if that helps. It would also be a good idea to try the connection in SafeMode with networking to see if the problem persists.
  Hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• Network problem between Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Original title: network problem!

  How can I get my laptop with Windows 7 Home Edition to connect to my desktop with Windows XP on it. I have a router Linksys WRT54 plugged directly to the desktop via ethernet and my laptop has an excellent signal but I can't access programs or the printer with it. I know the 'host group' on 7 but XP isn't that. Are there alternative than to put 7 on my desktop? Any suggestions?

  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  According the description of the problem face you connection problems in Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Residential group option is available on Windows 7 and Windows 8 operating systems. However, you can see the following article for more information on the connection of Windows 7 and Windows XP computers:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• "The profile could not be signed on-line. There may be a network problem or the Windows Live ID service may not be available. »

  "The profile could not be signed on-line. There may be a network problem or the Windows Live ID service may not be available. »

  Please help Thierry

  You can send me a mail on * address email is removed from the privacy * when you got an answer for me.

  Hi ziphovicHlubi,

  When exactly do you get this error message?

  Try the steps from the following link:

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message
  http://support.Microsoft.com/kb/938705
  http://www.Microsoft.com/games/en-us/support/pages/technicalissuesguide.aspx

  If the steps above fail, then I suggest you to post:
  http://windowslivehelp.com/

• home network problem: I am running Windows 7 and you want to allow a PS2 and XBox 360 to access on the pc programs

  I am running Windows 7 and you want to allow a PS2 and XBox 360 access programs on the pc. Is this possible? How can I make my pc a media for a network server home?

  Hello

  Thank you for writing to Microsoft Communities.

  I suggest to check the following links and check if it helps.

  Connect to Bluetooth and other wireless or network devices: http://windows.microsoft.com/en-US/windows7/Connect-to-Bluetooth-and-other-wireless-or-network-devices

  Add a device or computer to a network: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Establishment of a network domestic: http://windows.microsoft.com/en-US/windows7/Setting-up-a-home-network

  You can also keep in touch with the Play station 2 and the Xbox 360 support.

  Please follow these recommended steps and post if you still experience the problem.

• WINDOWS XP PROFESSIONAL NETWORKING PROBLEM

  whenever I try to connect to the other computer on my network, the window opens asking for the password set by the other computer, so that no password is defined by the other computer. ANOTHER COMPUTER CAN BROWSE MY SHARED FOLDER BUT UNABLE TO CONNECT TO THE INTERNET TO CONNECT WITH THE COMPUTER OF MINE.

  A PING ON THE TWO COMPUTER IS OK.

  PL. HELP

  Two important pieces of information are missing from your message.  Is the machine that you are trying to connect to Windows XP Home or XP Pro?  If it is XP Pro, "Simple file sharing" turned on this computer?

  In general, here's the sequence that is used to connect to another computer on the network:

  1. If the target computer is XP Home or if the target computer is XP Pro and Simple file sharing is enabled, go to step 4.
  2. If the same user logon name exists on both machines and the passwords for this connection are the same on both machines, the connection is established.  Otherwise...
  3. If the same logon user name exists on both machines and the passwords are different, the connection is refused.  Otherwise...
  4. If the guest user is enabled on the target computer and no password, then the connection is authenticated as the user Guest.  Otherwise...
  5. A window opens asking for authentication information (username / password) for the target computer.  If Simple file sharing is enabled, then you need to authenticate as the Guest user.  If Simple file sharing is not active on the target computer, then you can authenticate you as any user that is recognized by the computer target.

  So if when you try to connect, you get the window of connection in step 5, then you should you a change such as something in steps 2 through 4 to intercept the connection attempt.

  Hope this helps,
  JW

• Cannot download the software due to a network problem

  Hi all I'm on MacBook Pro (retina, 15 inches, end of 2013).
  I try to install Windows 10 with the version downloaded from the Microsoft Web site.
  I finished uploaded and am trying to use Boot Camp to install Windows 10.
  However, I faced a question and it is that he "cannot download the software due to a network problem".
  I'm stuck here for an hour and I can't find a solution.
  I did all right until now by the following online tutorial but it prevents me to continue.
  Any help will be appreciated.
  Thank you.

  It is a very common problem. To fix this, first try to start your Mac in safe mode by following these steps-> safe mode try if your Mac does not commissioning - Apple Support

  Then, restart your Mac as usual and try to download the Windows support software again.

• Cannot install updates due to temporary network problems

  Hi need help please teporary network problems are interfering with windows update

  Read this: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Help us help you.

  Is this relevant: you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.