2 computers on an Ethernet network directly windows 8

Similar Questions

• CAN´t find other computers on the home network Windows.

  I have a home network windows already defined with two desktop with Windows XP and a laptop with Windows 2000. The computers are connected to a router with ethernet cables and the lap top wireless (WiFi) to the same router. Now, I'm trying to connect a fourth computer (a desk top) with Windows Vista. It works fine to connect to Internet, but I can't reach the other computers on the network. On other computers, I can see a 'new', but I don't see the others of a "new". Can someone help me with the configuration of the computer "Vista"?  Thanks in advance.  / Thomas

  Hello
   
  To home network computers running different versions of Windows, we need to make sure that what follows.
  a. ensure that all computers are in the same workgroup.
  (b) the value of the private network location type.
  c. open ports in your firewall to allow file and printer sharing.
  d. turn on additional file and printer sharing options.
  e. consider using password protected sharing.
  5 using the network card.
   
  The NIC in the network and sharing Center is a graphical view of the computers and devices on your network, showing how they are connected and including problem areas. A computer running Windows XP can be detected and appear on the network map, you may need to install the Protocol Link-Layer Topology Discovery (LLTD) on this computer.
   
  To install LLTD, visit the following link and download: http://support.microsoft.com/kb/922120
   
  For more information on the "networking running different versions of Windows' computers, visit the following link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Set up the controller ethernet and network drivers Windows XP 32-bit & missing and impossible to get online

  HP Pavilion dv6205us had a blue error screen and only solution was to reinstall Windows. Have a Windows XP Pro disc, someone gave me and reinstall and repair.  Tried to reboot the computer, it would not start.  After several methods & attempts, I can restart now).

  Windows XP is old version 2002 Service Pack 2.  Need several updates and drivers who have not installed, the ethernet & network controllers are not available to log on the internet.

  I have tried several sites but need to download a program. I download the program from another PC flash drive and install on HP;  the program needs internet connection - is not available.

  Went to Device Manager / found following: (yellow mark and code-28 points)

  VINZ & DEV provided:

  1180-0592 base system device

  1180-0843 base system device

  1180-0852 base system device

  8086-1092 Ethernet controller

  Network controller 14E4 - 4311

  Device PCI 8086-27 d 8

  8086 SM Bus controller - 27DA

  Video controller 8086 - 27A 6

  Video controller (VGA compatible) 8086 - 27A 2

  Hello:

  Here are links to the drivers you need:

  First install the chipset driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-39732-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

  Then, install the Intel graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-44164-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

  Audio:

  All first install this driver... and restart

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-45958-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

  Then, install this driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-45941-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-43103-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

  Network controller: it's the latest XP driver for the card to your laptop wireless.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=3688870 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_101092_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Base system device

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42847-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

  Quick Launch buttons:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-57820-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

  Modem:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-44166-1 & CC = US & DLC = in & lang = to & LC = on & os = 228 & Product = 3224055

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• driver Ethernet and network for «Windows lenovo xp 7 style 2010»

  Hello

  I have a lenovo 3000 N200 & recently upgraded to Windows lenovo xp 7 style 2010

  but now his LAN does not work; Device Manager indicates that it can not install the driver ethernet & network

  how it can be fixed?

  concerning

  Finally, it has been resolved after several uninstallation / installation of device drivers and restart windows!

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• Cannot access Ethernet network

  I have recently updated my network router and has difficulties to get things to work. My Internet is wireless (no land line). For more than 6 years, I have used with success a Netgear MBR624GU 3 G Router wireless broadband that allowed me to access the Internet as well as to support a physical Ethernet network (with other computers, printers and a Sonos music system with the iTunes library on a NAS). The Netgear router was also on the Ethernet network (all with 192.168.2.0/24 IP addresses). There is also WiFi access for iPad, etc.

  Go now my new contract LTE brought me a router Huawei Mobile WiFi E5577C. There is no Ethernet port. I managed to access the Internet through it. However, I cannot now access the Ethernet - ping reports "Request Timeout" and printers and Sonos system are not accessible. This seems strange to me, I thought of a direct access to the physical network should be easy. I tried things like turn off Wi - Fi, but who did not have Ethernet access works. I put the Ethernet network with the highest priority in the order of Service, a second Wi - Fi connection. Currently I have two Ethernet and Wi - Fi configured manually (attribution 192.168.3.0 Wi - Fi and Ethernet 192.168.2.0 IP addresses, Wi - Fi with 192.168.3.2 as router - I also tried to use DHCP but with no more success). I also tried with and without the Netgear router that is also attached to the Ether net but that doesn't seem to make a difference.

  I thought that I have perhaps need a router different with a port Ethernet (like the Netgear) but, given that I have to pay for that myself, I know whether it is the only solution before spending money.

  I guess I understood something wrongly in this configuration. If anyone can give me any advice or suggest what I might try, I'll be very grateful. If I should post more detailed data, please let me know.

  You are going to have to implement some sort of IP routing or bridging of the connected to the wireless network, or you will need to implement local areas with several connections network with separate subnets.   You might need the static routes for devices with multiple network paths, but you will need at least to have your wireline and wireless in separate subnets.   This so that your network traffic can be set via Wi - Fi to the ISP, or via cables to other local devices.

  Or get a modem that has wired and wireless.   Or one that has a cable, if you are inclined to set up and manage your own network.

  If there is the budget and the desire to run your own network...  My usual preference involves isolated for each of the main functions and including the PSI at the edge device and devices configured to a minimum.   In other words, an ISP modem device with a wired connection and a "bridge" of the ISP connection mode.   Then a box of firewall router gateway controlled locally and a distinct feature of Wi - Fi and preferably one with an access point (AP) mode.   Get your own gateway firewall services, NAT and associated box.   Keep your ISP as simple as possible.   It is more boxes at the front, but when a box crashes or when you change your ISP, you may need to change only the ISP modem.  Other devices will not need to change.   There are positives and negatives of this approach points as, for example - you also manage all the security of your network and your configuration, 'in' your network 'behind' the ISP modem.   The ISP technicians can get only in what concerns the modem and only will help you with the part of your network.

  Network Bridge: works like a piece of wire to a wired network for most of the considerations.  Transparent background for IP network traffic.

  Network router: transfers the IP traffic between two or more different IP subnets.  Very well visible for IP network traffic.

  Welcome to IP network.

• not possible to bind a variable shared via Ethernet network

  Hello!

  I have computer A and B with windows xp, sp3 and labview 8.6, professional edition. The two computers are in the ethernet network. I'd like to Exchange data between two applications of LV using shared variables. I create a shared variable (published network) on both computers.
  The problem is in the properties of shared variables not possible to bind the variable of the remote computer to the local computer. In the first step, there is even no possible to see any computer on the network. After the registration of the computer (Tools-> shared-> computer registry variable)
  I see the computer remote, but without any variable sharing.

  Do you have any idea how to solve this problem?

  Thank you for the answers.

  Hi ,

  Visit this link, maybe it can help you.

• Install the software not found on my OfficeJet Pro 8000 wired Ethernet network

  I'm trying to reinstall an OfficeJet Pro 8000 on my wired ethernet network using the 'minimum' driver install.  My PC is Windows 7 Pro (32 bit).  I have the printer configured with a static IP address, I can successfully ping and accessing the Web page printers via the IP address.  I have uninstalled the HP 8000 software using the two installation software "uninstall" and you run the HP removal utility and have restarted the PC.  I disabled my firewall ZoneAlarm and AV/AS software for installation.

  During the resettlement process, when the software is looking for network printer, it cannont find the printer on the network, despite the fact that I can ping the printer directly and access its Web page via IE.  Using the advanced search and entering the IP address of the printer does nothing.  I'm at the end of my ideas on what to try (I said this whole process about 3 times now with the same results!).  What Miss me?

  Thank you

  Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=4063&product=4083977&sw_lang=

  What did he say?

• Ethernet network Officejet Pro L7555 printer-perfect on one but feel problems with others

  My HP Officejet Pro L7555 is connected to an ethernet network.  Two computers are on the network in the same residential group.  The printer is installed on computer A (I-5 with Win 7 Pro) files downtloaded the HP support assistance.  It is shared with computer B (I-3 with Win 7 Home).  The printer works perfectly with A computer, which gives a perfect page test, but on computer B, it will print only a small portion of the top line, true for all applications I tried to print from.

  When I try to use the HP solution on computer A Center, I receive a message that the installation is not complete.

  The Scan doesn't work at all, showing no connection when used with Windows Fax & Scan, but then I could never run early on with my old Windows XP computers, and all attempts to download updates for the older systems failed.

  Print clues about how to solve the problem would be greatly appreciated.

  J_A_K

  8Lives,

  Just a note to say thanks for hanging with me and driving me to an exceptional result.  The printer work from now on, the two computers and not only as a printer, but as a fully functional all-in-one.  He has never worked this way before, mode scan fax or computer.

  I hope that my questions has not caused too much eye-rolling on your part.  Be accomplished without your knowledge, this never could clear and excellent help.  I especially appreciate timely responses, you have done throughout this process.

  Kind regards

  J_A_K

• OfficeJet Pro L7590 fails to install as a network under Windows 7 64-bit device

  I install the full feature software and driver for my Officejet Pro L7590.  I am running Windows 7 64 bit.  The printer is connected by ethernet through my network.  When I get to the step to add the printer as a device, I select it's a wire to it with an Ethernet network connection.  It is my printer and it's thanks to a wired connection.  He then began running diagnostics that appear successful.  It starts to install and is about 50% and fails with no explanation.  My choices are again (which produces the same result) or continuous (just out).

  I rebooted several times, turned the printer off and then under tension, but nothing seems to help.

  I can navigate to the administration page web printer and it seems fine.  I also have other computers on my network that do not have a problem, but they only use the base, not the full features software print driver.

  Have solved it with the HP chat service.  Try to add the device from the shortcut that was installed from the first unknown failure has not worked.  Had to use the full software download and add the device from there.  He acknowledged some conflict that he was able to fix.

• I am not able to connect Stor-E for the other computers on my home network

  I just bought a Stor-E but I can't connect to other computers on my home network which I think is a Netgear router which is connected to my BT home hub.

  I can access the stor-e of my laptop and pc, but cannot access the Stor-E when I go to the working groups then on my PC it calls for a Net User ID and password have tried my user id and password for my pc but this doesn t seem to work.

  Someone has an idea what I am doing wrong?

  But in general your Stor-E works correctly when you connect it directly on different computers, right?

• I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The request is not supported.   All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.
  The procedure below: the problem: give perminiant solution pls
  1. delete the field and add the domain
  2 delete the user profile, and create user profile.
  Error:
  An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• How can I remove the computers in a home network, I created?

  Original title: leave the Working Group

  How can I remove the computers in a home network, I created? How can I remove a home network? I know it's easy with windows 7, but I can't understand for the life of me how do it with XP.

  Hello

  Let me see if I can sort this out.

  You have a network named "Homegroup".

  You have several working groups set in place, and you want to remove a computer from one of them?

  If Yes, go to this computer, log in as administrator

  Click Start > right click on my computer > select Properties

  Click the button change

  Delete the name of your workgroup of the lower part of the window and in its place type 'WORKING group' which is the default setting.

  I hope this helps!

• I need help setting up a network between Windows Vista and Windows 7.

  original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER

  HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER

  Hello

  You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows