Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

Similar Questions

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• Network problem Windows 7

  I have 5 Configuration of computers in a peer-to-peer network configuration. We store all data on a single machine, 'server '. The "Server" is running Windows XP and the other 4 machines all run Windows 7 with SP1. This configuration has worked very well for a few years without problem. Over the weekend the necessary server machine a new chipset fan installed. After installing the fan and start all worked as usual, except one, the four 'client' machines is therefore more able to connect as usual.

  Can someone point me in the right direction on how to retrieve this a machine on the network?

  Thank you.

  Hello

  Thank you for keeping us posted.

  I certainly understand the inconvenience caused to you.

  According to the description, it seems to me that the problem is associated with a server.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• Unexpected kernel mode trap error on Windows 8

  Recently I was faced with this unexpected kernel error problem. It appears randomly and in short time. Whenever I use my PC all of a sudden a blue screen appears and restart once more. And then again within a few minutes the same problem starts. I use genuine windows 8. can someone help me?

  Hi MinWang,

  Welcome to the Microsoft community.

  I need more information on this issue.

  1. Have you followed the steps provided by the previous posts support engineer?

  I suggest you to refer to this article and check

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559244%28V=vs.85%29.aspx

  WARNING:

  1.important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  2 system restore: If we say that the system restore does not affect your personal information such as e-mail, documents, pictures, videos, etc., but it is quite possible that some of your personal files are removed during the restoration of the system.

  During the restoration of the system, there may be errors and those errors can damage the files that are present in the system. And turn off your computer during the restore process may also lead to the loss of files. Sometimes, when the restoration of the system is down, it can lead to the loss of important files as well.

  3. If you perform a clean Installation of windows, so first try to save your data.

  I hope that this information will help you.

  Please reply with the status of the issue so that we can better help you.

  Thank you.

• Network problem Windows vista and Mac computers.

  Original title: cannot share the file, help!

  Hello.

  I just got a macbook the other day, the mac was pretty easy to understand how to set up for file sharing. It is installed on my pc and that you can view the files mac very well. However, I can't the PC to share files on mac to save my life. I didn't actually work earlier pretty ok, just read a comment online, but then the mac has had a problem with a hard drive so they just replaced with a new computer. I had the same model. I'm not sure what I'm doing wrong. As he asked a username and password for my PC to connect and view files (so I thought a lot of outside). I entered the same username and password for PC information, I entered earlier (several times), and it wouldn't work. I tried to enter my information to connect PC and it wouldn't work. I tried implementing new user names to add to the permissions and it would not work to connect on the mac. I tried to disable the password protection all together on pc and it still does not either. I know I entered the data correctly, I tried to work 3-4 hours... I'm a little confused, because it worked pretty quickly earlier and I did the same thing.
  What can I do? I'm doing something wrong? Any help that anyone can give is GREATLY, GREATLY appreciated! Thank you!!! :)
  Hello
   
   
  Follow the below mentioned article and see if that helps:
   
  Mac OS X: how to connect to files Windows (SMB) sharing
  http://support.Apple.com/kb/HT1568
   
  If the article above is not enough, there will be some settings on a Mac computer need to change, then you can contact Apple for additional assistance.
  Here is the link: https://discussions.apple.com/index.jspa

• Can no network in windows 8 OS comments, I find drivers?

  Hello the VMWare community. I am to evaluate VMWare workstation 9, and most of the time I love it. Since I am a user of the totally blind computer that uses software text-to-speech screen reader, keyboard shortcuts for bootting VM, and switching between the host and the guest of the BONE are a must for me. I have 3 currently configured VM. My host OS is windows vista Home premium 32-bit, running on an older Toshiba laptop. My guests are windows XP pro, windows 7 pro and windows 8 pro. My XP and windows 7 clients work well. However, my Windows VM 8 has not any network connectivity either. Looking in the Device Manager in windows 8, I see an ethernet controller under other devices with no driver installed for it. VMWare does not install drivers for the guest OS or I have to see if I can find the drivers for my physical NIC for windows 8? The host computer is an old Toshiba Satellite P205D laptop PC series. When you configure windows 8 VM, I said I wanted to networking, and I tried NAT and mode, no luck with either bridged. If anyone can give me some ideas to get networking to work under windows 8, I would be grateful. I have full access to windows 8 with my access to MSDNAA now dreamspark through my college. So any ideas on getting my ethernet controller in windows 8 VM would be useful. Thank you.

  Have you created the virtual machine by using the default settings?

  The default for Windows 8 virtual network adapter is the "e1000e" and must be recognized by Windows 8 out of the box. Please check if the configuration of the virtual machine (.vmx) file contains the entry that is appropriate for the network card.

  ethernet0.virtualDev = "e1000e.

  André

• Problem SQL Server 2012

  How can I solve this problem.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• C:\Windows\diagnostics\system\networking 0x800700C1 Windows 8?

  C:\Windows\diagnostics\system\networking
  Error codes: 0x800700C1
  Source: engine
  User:
  Context: restricted

  I've heard of this on Windows 7, but it happens to me on Windows 8 once I have updated very ironic that after I updated I can't not be updated not more each time I tried an error code comes from the error (S) found: Code 80073712 and this update I'm trying to do is update Microsoft.NET Framework 4.5 on Windows 8 and Windows Server 2012 for x 64 systems (KB2805227), but after I installed optional updates, all went to the chaos I can't run the problems on my Internet nor can I update so what can I do else? Ah yes... I have an Ethernet cable plugged and that seems to work except that I can't use Troubleshoot on it says Ethernet IPv6 connectivity cable: access no. network which is the second line, that of the top IPv4 connectivity is: Internet Modem hook up is not nearly this PC I him have already picked up and restarted the Modem , he showed on this PC there is no victory to Internet I tried to click to see if troubleshooting arise it won't let me not used so I don't no idea that continues, but I JUST refreshed this PC because Norton went a little wacky on me and made me re - new buy > _ > an error code showed a victory , I tried to update and I had refreshed this PC, now I have this good with it I really don't want it réactualisiez

  Hi Asukari,

  Thanks for the detailed description of issue.

  Here are some ways you can follow to fix the problem with Windows update:

  Method 1:

  Check out the link and follow the steps in the article under the heading Windows 8:

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/957310

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Method 2:

  Try to install the update manually in clean boot mode and check:

  Check out the link to place the computer in clean boot mode:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

  See the link to download the updates manually:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=38879

  Also check out the link if you have problems connecting to the internet.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• 2 computers on an Ethernet network directly windows 8

  I want to connect to my backup PC directly without running into my router (my PC has two network adapters)

  Plenty of info out there to do this on win7 and vista, none for win8.
  I connected the 2 together and in network and sharing Center and I can see my original network and the 'network unidentified' - Public network
  Connections: ethernet.

  Hello

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• IMPOSSIBLE or CAN NOT install printer Windows 8 is called a Kernel Mode driver

  Very similar to this topic.

  None of the solutions provided works.  I wish I could get a screenshot, but it is a computer, I was working on a friend and won't go back for a few days.

  • I tried the things:
  • Download latest version of the driver Windows 8 x 64 absolute of the HP website for the printer in question (color hp laserjet pro m251nw).  Tried the two 'single driver' and «full installation» downloads
  • Tells Windows to use a driver from Windows Update.
  • There is no Citrix based application to uninstall anywhere on the computer.
  • The computer is Windows 'standard' 8 - so using GPEdit to disable "Disallow installation of printer kernel-mode drivers" was not an option (although I used a 3rd party GPEditor to try to change this setting, in any case, nothing is done).
  • I used Advanced Startup to start without driver Signature check.
  • Disabled prevents anti-virus software for to ensure that he was not.
  • I am confident that the local user on the computer had all the permissions in the menu devices and printers.
  • I tried to install everything using the "right click / Run as administrator."
    I tried to install using the XP SP3 and Windows 7 Compatibility Modes.
  • I made sure that there is no files in the folder of print reels (C:\Windows\System32\Spool\Printers\). and reset the print spooler.
  • I am able to ping the network printer and it prints the test pages, I do not believe it to be a problem with the printer itself, just a strange setting cause me all these problems.

  Help!  I'm an IT Pro, but I spent 3 hours on this and I'm not used to being totally defeated!  Haha

  Thanks in advance for any advice!

  Hello

  Thank you for keeping us posted.

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  We know if you need help.

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Qosmio X 500 and question NVIDIA Windows Kernel Mode Driver.

  Hello

  For some time my X 500 will 'freeze' then gives me a black screen before returning to "normal" with an error display window in the taskbar. The read error ".

  "* Display driver stopped responding and has recovered."
  "+ Display driver NVIDIA Windows Kernel Mode Driver, Version 259.12 stopped responding and has successfully recovered.

  Have run a diagnostic on the laptop and tried the NVIDIA drivers updated etc, but it continues to happen.

  Any ideas on the causes AND more to the point HOW to solve this problem?

  I post a screenshot of the error message but cannot find how this is done - if it is allowed?

  See you soon

  Frank

  Hello

  I guess that this is caused by the graphics chip, it is possible that caused graphics card driver problems related to bad entries in the registry or in the worst case the graphics chip could badly run.

  Also found this thread where the user that edbelgium seems solved problems with graph on X 500.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64607

• Satellite A500 - NVDIDA Windows driver in kernel mode has stopped working

  I bought a brand new Satellite A500-1GL with a Geforce GT 330 M graphics card. Unfortunately, whenever I watch videos in full screen I get the following error.
  "Display Driver NVIDIA Windows Kernel Mode Driver Version 188.29 has stopped working and has recovered"

  The screen turns white and the sound terribly false. I have already uninstalled and reinstalled the Nvidia drivers. It seems that all A500-1GL models with faulty chipset on the motherboard. Toshiba must investigate this matter!

  Help, please

  Hello

  The videos you watch exactly? This happens with all the videos, for example Youtube, DVD, or only with specific files?

  I also GT330M graphics card in my phone but I can t notice any problem with him. I m using the version preinstalled Windows from Toshiba and the last driver display Toshiba official page.
  And you should try updating the BIOS

  Finally and most importantly, another user reported that he could solve the problem if Windows Aero is disabled:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51367

  Check this box!

• No access to Windows Update in Windows Vista safe mode with network

  Since yesterday every time I connect normally to Windows Vista, the programs stop responding at random and nothing works Manager tasks even not so I am forced to close it manually, the only way that I normally use my computer is in safe mode

  I googled and someone who has had a similar problem to mine all downloaded updates critical to windows update and that seems to fix the problem

  My question is how can I access Windows Update in Safe Mode with network, because when I click on start - Windows Update, nothing happens and I cannot use windows install either.

  Thank you

  Hi Renee,.

  Please use the Community Forums for Vista.

  Probably not the cause, but enabling it does update race and there is probably a problem there.

  Well, let's see. If all your restore points are gone, it's bad. Often, it is a virus.

  Here's what we need. Error codes, messages, etc.

  If no pop up, go into the event viewer (just type in the search bar) and look in the logs of Windows, Applications, and system folders. Please only after the event. We just need the event id and the application causing him.

  Here's what you can do in the meantime.

  Run the checker system files and chkdsk.

  Get back to us with error messages and follow the directions below.

  Follow these steps.

  Type cmd into the search bar and press to enter.

  The chkdsk command line type, then press on enter.

  If it finds errors, type chkdsk /f to repair.

  Once that is complete, insert your windows installation disc in the drive and return to the command prompt. Type sfc/scannow, and then enter.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows updates can be installed in safe mode with networking?

  Re: Vista Home Premium 32 bit w/sp2.

  Windows update takes forever to download and even more time to install any update files. Then it configures when stopping down, then he sets up when power is on, oops one of your edits was not able to install and all the process begins again. I absolutely refuse to let the process run on its own if it is not an option. I personally oversee what, when and if something moved at all. I was wondering if updates can be installed in safe mode with network for a minimum amount of system resources are used and this could help speed up things a bit.

  Re: Vista Home Premium 32 bit w/sp2.

  Windows update takes forever to download and even more time to install any update files. Then it configures when stopping down, then he sets up when power is on, oops one of your edits was not able to install and all the process begins again. I absolutely refuse to let the process run on its own if it is not an option. I personally oversee what, when and if something moved at all. I was wondering if updates can be installed in safe mode with network for a minimum amount of system resources are used and this could help speed up things a bit.

  Clean boot the computer to see if that helps: http://support.microsoft.com/kb/929135

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7