network wireless device 104 undetected - yet replaced with like for like card!

Similar Questions

• Wireless network device 104 undetected

  Hello

  My laptop is HP Pavilion dv6t 1200 CTO with Win 7 64 bit OS. When I upgraded with a card mini with adapter type N type G existing wireless, I get "network wireless device 104 undetected." Unable to get pass to start the system. The card I used is 'true HP Pavilion g/n 640926-001, 639967-001.  She new part of HP. Why an HP wireless adapter card does NOT work with a same laptop HP?

  I did the two BIOS > Default SetUp and also did update the BIOS (from Drive download of Hp), but the same error message.

  I called your 'Technical Support' several times. All they do, they transfer my phone from one Department to another, without solution. It seems that HP has nothing but sell unnecessary products and waste of our money.

  ~ N68

  N68.

  Sorry I took so long.

  Just found 1 in a HP 6730 s and the other in our bucket of spair parts.

  

  Send a PM.

  REO

• wireless network device no 104 during the replacement of Intel 3945agb with Intel N 1030

  When replacing the wireless Intel 3945agb with Intel N 1030, the message card "wireless network device 104 undetected." system stopped. remove device and restart" appears.

  Intel ensures that these 2 cards are compatible.

  Model: DV-6600 series (DV-6660eb), built in 2007.

  Vista Premium (32 bit)

  No change on HW and SW since it was purchased

  BIOS: F5A (latest version according to HP, 2010).

  How to activate the wireless card Intel? (Download the BIOS of recent products with N 1030, such as DV6-6xxx 1xxx G6,...) ?

  Thank you

  solved flashing BIOS with whitelist F.5A deleted:

  http://www.BIOS-mods.com/forum/thread-HP-disabled-whitelist-mega-thread?page=15

• 871W wired connect/ping with wireless devices

  Hello

  I have a 871W giving me fits.  I've been troubleshooting this for some days now and may not know what I am doing wrong.  My wired clients cannot communicate with wireless devices.  My wireless devices are unable to communicate with each other.  However, my wireless devices CAN connect to a wired device!  I know because I have a local webmail server on the side wired can be achieved wireless.  All devices, wired and wireless, are on VLAN 1, which is be the only vlan configured.

  My configuration file properly disinfected is attached.

  When I try to ping from a wired device to a wireless device, I get the following error:

  ~ $ ping 172.27.44.27
  PING 172.27.44.27 (172.27.44.27) 56 (84) bytes of data.
  From 172.27.44.3 icmp_seq = 1 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 2 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 3 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 4 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 5 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 6 Destination Host Unreachable

  -172.27.44.27 - ping statistics
  8 packets transmitted, 0 received, + 6 errors, 100% of time packet loss 7051ms
  pipe 3

  ~$

  Wireless devices simply timeout trying to ping each other.

  Thank you for your help.

  Chris

  Is there a firewall on the host wireless?

  Do you have wiresharked any traffic to see if it is to hit the dest host?

  Look at the config looks ok. Some additional ACL that I've not seen it used is here.

  Can ping wireless and wired a public IP address?

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

• How to print from the iPad on LaserJet p2015dn which is connected to my network wireless Ethernet?

  How do I print from my iPad 2 on hp LaserJet p2015dn which is connected to my network wireless capable Ethernet?

  Hello

  Thanks for the post.  I have included a link below that can help with printing from your iPad.  Please read carefully to ensure that your situation meets the requirements.   HP ePrint home and Biz.  Good luck!

  https://h30495.www3.HP.com/help#mobile_apps.Ma-printer-issue

• Need to connect to the home network wireless - Windows XP Pro - error with network password - needs to be 40bits or 104 bits...

  I have a new laptop at home which has windows xp sp 2 is installed.  I am trying to connect to my wireless network.
  I get the following error;
  The network password needs to be 40bits or 104bits depending on your network configuration.  This can be entered as 5 or 13 ascii or 26 hexadecimal characters.

  I gave my father a new laptop computer this fall and he gave me one that had given him his friend... I've never worked with XP Pro...

  We have several other phones on this account wireless at home.

  You try to login with the wrong encryption method and you have this implemented extremely secure wireless network.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• Unable to share the wireless internet with other wireless devices

  Original title: I'm trying to share the wireless internet on my computer with other wireless devices, are don't see is not the other.
  Internet through my wireless computer connections are not visible to my other devices. How can I fix it so that my other devices will be found and connected.

  Hello

   
  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3. what version of operating system you are using on the computer?
  4. What wireless device you try to share?

  Method 1:
  You can try the steps in the link and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  I suggest to turn on network discovery, and check if this helps you solve the problem. To do this, please follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  Method 3:
  If the problem persists then you can disable firewall on the computer and check.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.

  For more information about how to resolve common network problems, please see the links below:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a problem with connecting to wireless devices.

  I replaced a wireless router for my home network... I can not connect one of my wireless devices. . How do I solve this problem?

  Better to look in the manual of the router.

  Currently, your computers only know the parameters of connection (SSID and password) of the OLD router and have not been informed of all the settings on the new...

  If the wireless router provided by your ISP, you could ask to walk through the process...

• Wireless network lack of connections, network and Device Manager

  Good day, all the

  Recently I had to install a new hard drive and Windows 7 in my laptop VAIO from Sony, model VPC-F1290X, after my previous a corrupt laptop taking a fall. The installation went well, except that my WLAN capabilities are missing. The switch is in on it, of course, but the only option that appears is the Bluetooth. I checked to see if the icon for the network was present in network connections, so I could right click and activate, but it is absent. I also went into Device Manager to see if he would appear if I clicked on 'Show hidden devices', and I also tried to search for the hardware changes. All my drivers are up to date, and since then, I have installed all Windows updates. It has been a little over a month since the installation and I put the problem side and just continued to use the laptop with an ethernet cable. Now that the need emerged for a wireless connection, I can't seem to find a solution, and I found someone who is fully experiencing or has experienced a similar situation. All tracks to the installation of an adapter wireless from the Sony Web site seem to be oriented with a desktop computer.
  Any help or advice to an answer would be greatly appreciated.
  Kind regards
  Ryan

  You have installed the driver from the manufacturer of your laptop wireless?

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=VPCF1290X&loc=3#/downloadTab

• Why my wireless devices now disconnected since I got direct tv installed? I have to reset my router every time that I want to use my network.

  I have a wireless router Netgear #WGR614 with Comcast high speed internet and live tv with connection kit film installed and connected to my wireless network.  Since then, my other wireless devices keep connection loss, then I have to reset my router every time I want to connect to my wireless network.  Please help Direct tv lambasts Comcast and comcast complaint to Netgear.

  I would post on DIRECTV or DBSTalk forums for help as possible...

  http://forums.DIRECTV.com/PE/forums/displaymsgboardlist.jsp?channelId=1&portalPageId=1002

  http://www.dbstalk.com/forumdisplay.php?f=82

• G6-1c74ca: re installed windows now in trouble with drivers for pci devices and network control

  Hi I cannot locate the drivers I need to download for my laptop. I have recently reinstalled windows and it can not find the dirvers for my network control devices and pci. The model number is g6-1c74ca and the product number is A3J86UA #ABC.

  Yes on the page that I linked above you need Realtek LAN and LAN Realtek wireless network and also Intel Management Engine Interface under Chipset.

  If it's "the Answer" Please click "Acceot as Solution" to help others find it.

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)