Why my wireless devices now disconnected since I got direct tv installed? I have to reset my router every time that I want to use my network.

Similar Questions

• Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

  Continually 871122 WZC error.

  Hi Shane,

  Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

  See the following Article in the Microsoft KB, see if it suits it for you;

  http://support.Microsoft.com/default.aspx/KB/871122

  More precisely:

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Let me know how you go.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• Firefox crashes almost every time that I try to attach a document. Why?

  I just had a new PC from Dell XPS Dimension w/Win 8.1. She doesn't have Firefox, so I downloaded (version 29.0.1).

  Almost every time that I try to attach a document, for example, a photo or other file, Firefox crashes. The accident occurred when I double-click on the directory or folder that contains the document I want to join. I presented in reports half a dozen incidents in recent days.

  Instead of double-click, I tried everything just clicking once on the button that appears when I OPEN request to attach a document. This reduces the frequency of accidents, but did not eliminate them.

  Accidents that occurred when I was trying to attach a document to an email in yahoo mail. The accidents have also occurred when I was trying to add a photo to an article I wrote for Examiner.co using their publishing tool.

  I just changed from Windows XP. DO Firefox crashed when I tried to do in XP.

  I tried to reproduce the problem in Internet Explorer 11, which came with my PC. I was not able to reproduce the problem with the Explorer.

  What is going on?

  I could not identify a reason for the accident. Now, I try to reproduce your crash on Yahoo for the setting of a document.
  Other users have reported than the update of Java fixed the problem. _{(reference: https://support.mozilla.org/en-US/que.../949408)} Please update Java in the current version

  • https://www.Java.com/en/download/

  You can also download CCleaner to destroy things that are no longer necessary and can cause problems. Just use the Windows section, do not delete anything since Firefox while CClaner because it can screw with your installation of Firefox.

  • https://www.Piriform.com/CCleaner

  EDIT: Thank you to fill out a bug if the steps above do not work
  In following one of your incident reports, you can file a new bug (example: https://crash-stats.mozilla.com/repor.../203cb33a-9193-4586-b7dd-79d0a2140529) scrolling up to the where it says
  Bugzilla | File this bug in Firefox | Core | Plugins | Tools
  Select Firefox. a new window load, you need to create a Bugzilla account to fill out a bug report. Once you have done this, simply fill out the description of the best that you can. Please try to be as detailed as possible. What were you doing in the crash, how many times it happens, etc. because this will help the developers.

• "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  1. my laptop - acer aspire 5030 - has been having this problem for the last five months.

  2. I tried everything including changing service pack, as we have xp professional, he has recently upgraded to vista business 32-bit with service pack 1.

  3 tried all the methods start the laptop after a few hours, remove the battery, press the power button for half a minute, and so on.

  4. I finally he formatted a couple of times, but the problem is not.

  5. later, I improved the professional system of vista and installed the latest security patches, but the problem remains

  6. now, I started to update its drivers, although the device is identified to be connected, but is not recognized. "the error message" not recognized usb device "appears. I try to reinstall the drivers or upgrade of drivers, it does not. It displays the message "the drivers for this device are to this day.

  7. initially, the connection of the device, the drivers are installed but still the device does not show in Explorer.

  8. I tried to change some registry values by merging a regedit file in the registry - for display devices that are not present; but still, it has failed.

  9. I then tried to delete the file infcache1.inf in c:\windows\system32\inf, but the problem persists.

  10. Subsequently, I tried to create another registry entry to "disable selective suspend" in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB by adding DWORD and assigning a binary value of 1.

  11. I tried later also to uninstall all the system devices including USB controllers, drives and the storage controllers, who must still without success.

  12. I tried to see if the drivers in safe mode, which they did not.

  13. I tried to delete the following registry entries =

  HKEY_LOCAL_MACHINES\System\CurrentControlSet\Enum | USB PORT; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10318 & HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10200.  The computer does not have alow it.

  14. the BIOS indicates device pnp "disabled", which I also look for the BIOS settings, which do not allow me to change to change existing ones.

  15. I have not found the WINDOWS\SYSTEM32\drivers\USBSTOR file. SYS in my driver store. This affects the system?

  16. I also contacted manufacturers pnp devices that provided me with most recent and versions compatible drivers for my devices - namely an apple ipod & Seagate external HARD drive - but even after that the drivers are installed properly and the system rebooted the problem remains. Is this something to do with the updated playing driver registry entries does not after the update? OR is what registry entries are configured to only read the entries at the time of the installation of the OS?

  17. I also contacted local sellers who have suggested to me to change the "motherboard". This will help as a last resort?

  18. in the meantime I had also installed other operating systems to Linux - Fedora and Ubuntu; Full Windows XP - Home & Professional and Vista Edition. All these have been installed successfully but do not solve the problem of usb.

  19. I have also raised the original HARD disk & replaced by another HARD disk. also checked the power of all ihee and ehee usb ports to be at least 5 V. I also disabled the automatic deactivation of devices usb by the system. physical contact, ports and connecting cable is fine. the distribution of power is set at 10% for the ihee ports and 20% for ports ehee, which is what is should be the physical output is also close to 5V for all ports connected.

  20. all professional (hardware or software) should any solution for the problem of the usb ports on my laptop?

  Something that you haven't tried:

  How to fix USB device not recognized in Windows

  http://www.online-tech-tips.com/computer-tips/USB-device-not-recognized/

  I hope I could help

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Since the upgrade to IOS 9.3.1 my Telstra sim displays no Service every time that I reboot.

  Since the upgrade for my iOS 9.3.1 iPad2 my Telstra sim displays no Service every time that I reboot. I contacted Telstra and they sent a signal to the Tower closest to you. However, every time that I reboot I remove the sim card and then reinsert it. I then get a complete service.

  Network settings may be damaged after an update of iOS.

  Tap settings > general > reset > reset network settings

  Then restart your iPad.

• Evrytime I connect me, I have to reset my date and time, why?

  Why my date and time do not be saved? Why should I reset each time my date and time?

  Hi NarendraNP.

  Here are three possibilities about why this is happening to you.
  1. The time in the BIOS is not set correctly. Therefore, every time that you start the PC the incorrect time is displayed. To correct, shut down the computer, turn it on and immediately go into the BIOS settings. Check that the date and time is defined, save and exit, then start the computer normally.
  2. The CMOS battery is dead and needs to be replaced. To fix, you have to expose the motherboard and replace the small type CR2032 on motherboard. You can find many videos on YouTube that will show you how to replace a motherboard CMOS battery.
  3. You don't have administrator rights to the computer to change the date and time, or there is a program installed on the computer that locks the system setting changes (an example of a program that does this is Faronics DeepFreeze). The only solution for this is to temporarily disable the program that is to lock the Control Panel, or ask a system administrator set the date and time for you.

  One of these explanations\fixes help it?

• I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?

  I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?

  Happy that he sorted out for you. Thank you for taking the time to let me know. MS - MVP - Elephant Boy computers - don't panic!

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• Inspiron 5548 disconnects every time that I add/remove a second monitor

  I have a new 5548 Dell Inspiron running Windows 8.1, and I noticed whenever I change the configuration of the monitor the system disconnects me. This will happen if I connect a new monitor and change the configuration of "duplicate" to "extend" or if I connect or disconnect a monitor that I use as a second screen. Any thoughts? Maybe a graphics card problem?

  The system has Intel HD 5500 Graphics and AMD Radeon R7 M270 (4 GB) card.

  Awesome!  It worked for me as well.  My not to get this driver Intel:

  (1) open the Device Manager, select display adapters, double-click Intel HD 5500 Graphics, go to the driver tab, click on uninstall.  I didn't click the option 'delete the driver '.  This operation I disconnected.

  (2) connection to.  Open the Device Manager and cards as above.  Now, I've seen a basic from Microsoft instead of the Intel HD5500 driver driver.  Double click on it.  Click the "Update Driver" button.  Select the option 'automatically search for... ". ».  He went out and found Intel HD Graphics 5500, v10.18.14.4156, 03/03/2015 and installed.

  What is frustrating, it is if you go to graphics cards and select 'Update Driver' for the installed (issue) 2014 HD5500 driver version, it tells you that it is already up to date!  If you go directly to the Intel site, download and run the Intel driver update utility, it is not also indicate there is a newer driver from the HD5500.

  Such a waste of time.

  Oh, and that support the ticket that I tabled last week?  Dell has not yet assigned yet.  Way to go Dell, thanks (not) for assistance.

• I am unable to connect wirelessly with my new laptop. He always tells me to try to reset the router, but it does not work.

  original title: I'm unable to connect my new laptop...

  I'm unable to connect my new laptop which has a 802.11n modem to my router Linksys 2.4 GHz 802.11 g wireless. Try troubleshooting and it tells me to reset the router. Help...

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• Why my Windows 7 theme keep changing every time that I reboot?

  I recently bought a laptop Acer Ferrari One with pre-installed Windows 7. I have customized the Windows 7 theme, but every time I turn off reset them to the default desktop background settings when I switich it turn it back on. The other parameters remain the same as the color of the sounds, screensaver and window, but why change my wallpaper? I saved the theme I created and continually delete one keep the laptop automatically create by default. How to stop? Is it possible that I can do my default theme?

  Thank you

  I experienced the same problem, but this solved it for me.

  Go to regedit > HKEY_Current_User > Software > Microsoft > Windows > DWM

  Once in DWM, right-click on an empty area inside it and create two new DWORD value (32), as shown below.

  Blur

  Animations

  Once these are added, right-click on them and click on change to ensure that the value is set to 0. Then open cmd (command prompt) as an administrator.  -Windows 7 users can open quickly as administrator by typing cmd in the start menu search box, and then shift + right click on the command prompt > open as administrator

  net stop uxsms

  net start uxsms

  __________________________________

  Once those who are made, open the start menu and right click on computer > properties.

  Go to advanced system settings. On the Advanced tab, click settings under performance. Change the default to Custom, and then hit apply and OK.

  You may need to disable a list item to hit apply, but double-check it after hitting apply first and then re - re-check the list item and click on apply. This will prevent the computer to change the custom to 'let windows choose what's best for my computer.

  This will fix the problem. Looks like a lot to do, but really, it isn't and is easy.

• Why do I get an email every time that I use my browser to access iCloud Info?

  whenever I use a browser to access iCloud, I get an email to tell me that this has happened since MY long held MacBookAir why is it happening?

  Whenever your account is accessible by a new method, you are warned that happened, even when you did. If I somehow accessed your account on a browser you will receive the warning.

• A neighbor's wireless network is more powerful than mine, so my MacBookPro selects every time.  How can I eliminate the network of neighbour from the airport to the research?

  Wireless network from a neighbor is always "found" by my Airport first, then my MacBook links to it.  But I want to find my own network, of course.  Question: How can I remove this neighbor of the network function research network?  Is it still possible?  In other words, I want my laptop to ignore this network around when I wake up from my laptop.

  On your Mac laptop...

  Open the preferences system (gear on the dock icon)

  Open network

  Click WiFi on the left panel to select

  Click Advanced in the bottom right of the window

  Here you can see the list of networks that 'remembers' your laptop and connect to the network at the top of the list first.  If you want the laptop to connect to a specific network, click the network name to highlight, and then drag it to the top of the list.

  Now, click to highlight a network that you do not want your laptop to 'remember', then click on the - (less) button at the bottom of the list to remove the network. Do the same for other networks that you no longer need.

  Click OK at the bottom right of the window

  Click on apply in the next window that appears

  Close the windows and then restart your Mac.