Network XP and windows 7 - "limited or no connectivity."

Similar Questions

• Replace/upgrade my router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in background.

  Original title: connect/disconnect sounds in the background

  I had to replace/upgrade to update my wifi router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in the background, on something, every few minutes.  It does not affect the operation of my computer, but it is very annoying. Cut the old router market and connect and disconnect before replacement, but did not any noise so I don't think it is related to that.  I can't find any evidence of the old router on the computer anyway.  I hope you can help me!

  Hi Danielle65,

  You can try the following steps and check if it helps.

  Method 1:

  You can also perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Method 2:

  You can also check in Event Viewer about what is causing the problem. Alternatively, you can publish the results, so that we can help you solve the problem.

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• RV042 and Windows 7 w / QuickVPN cannot connect

  I have a RV042 are we able to access with XP using the QuickVPN client, but now we have added a laptop running 7 Home Premium 64-bit.  I downloaded the most recent client (1.3.0.3), run it in compatibility mode (Windows XP, tried the SP2 and SP3), you router status indicates I'm online, but the client gets in regard to verification of network, then information windows appears which States: "the remote gateway is not responding.  You want to wait? »

  I also tried the VPN Client built into Windows without success, the connection failed with the error number 800.

  Looking for any assistance with this.  I'm sure its with Windows 7, as the XP boxes have no connection problems.

  Thanks in advance for any help,

  Dan

  Fast VPN is not yet supported for windows 7.  The 1.4.X.X release will support this and will be published shortly.  Sorry, I don't have a date for this.

• Loss of Internet and Windows features limited after a clean install of Windows 7

  Hi all

  Here's a bit of context. I had an additional Lenovo T410 sitting around, so I tried restoring it to its "factory condition" by a start-up "format". Plan was to boot from the CD drive and reinstall Windows 7 (32 bit) in the process. However, disaster, after the process complete, I'm now stuck in a kind of safe mode (everything is bigger than usual) and the computer is running several pilots. I manually installed the network card driver (can identify networking but cannot connect to the internet). Device Manager still shows device Base system, controller, Ethernet, Serial Port PCI, PCI Simple Communications Controller and unknown to be updated device drivers.

  My goals here are to 1) restore internet connectivity and 2) make all the features of Windows 7 Home Premium.

  Thank you for any input!

  * Virtual H.o.t. If you stuck with me through this whole explanation.

  Lenovo.com connect on another computer, click Help, enter your computer type and download the network drivers for your machine. Then return to the page to download the driver to your computer and download ThinkVantage System Update. Run this and it will update automatically the rest of your hardware drivers (see the post of Zoltan, above).

• How the network xp and windows 7 starter edition

  I can't see my computer windows xp on my Windows 7 computer's shared resources. I can't set up a homegroup because it's a starter edition. I can't change the name of the network on the computer windows 7. It remains as home, work, or public.

  Here is the Vista Forums.

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7 Networking Forum at the link above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless network disconnects and then take the time to connect again

  Hello

  We have a wireless network, composed of 23 WAP (1700) and WLC 2504. We have three SSID, 2 in vlan 120 and the third in the vlan 121.

  The network takes time to connect to any SSID, and after three or four attempts, it connects and some time connected to less range and a few times at all, even if we are under the WAP.

  Can someone please help me on this, as I am new on wireless and my main area of activity is R & S, SP and DC.

  Any help or the index will be very appreciated.

  Thank you.

  Kind regards

  Adnan

  I see no error with config.

  What version you use WLC?

  Are there any specific client having problems connection or all devices?

  Concerning

  Remember messages useful rates

• HP Pavilion Notebook 15-p119: Windows 10: since the execution of Windows update, I can't connect to the wireless network

  Hello, HP assistance.

  I'm having a problem with the connection to my home Wi - Fi network. I am sure the problem has nothing to do with my material and is a problem of Windows only.

  Here's the story: I was fortunately with the Internet from the network before and Windows was connecting automatically every time. But since the Windows Update recently it does not connect. Sometimes it says "unable to connect to this network" and then sometimes it comes up with a box asking me to enter a user name and a password. The thing is... I've never set up a password in Windows for Internet access, so I do not know why he was asking me now. I looked around the Internet via my Tablet (which is connected to the same Wi - Fi network fine, with my phone) and found that it is a common problem. And yet, none of the solutions work for me.

  I wonder if the solution is somehow change the settings so that a password is not required to connect to a network. Or maybe enter a default user name and password when the box appears again. That said, the box did not come for a while.

  Help, please!

  Thank you for your query.

  I understand that your mobile phone works well and you didn't have any problems with your wireless connection. After the upgrade to Windows 10, your wireless network is intermittent and will prompt you for a user name and password.

  The guest is not the Internet, but rather to join your network. He is looking for the network name and password.

  When I did a search for HP laptop 15-p119, I was unable to locate this model. Would you please check your model? How can I find my model number or product number?

  After the upgrade to Windows 10 did you all your Windows updates?

  Sometimes it fails to be installed automatically, if you can try running the Troubleshooting of windows update. to maybe gain others.

  You run the HP Support Assistant since the upgrade?

  If the problem persists, once you have established a test of Wi - Fi automatically update drivers Device Manager wireless.

  • Right click on the Windows button in the bottom left corner, then choose Device Manager

  • Click network to expand the list

  • Right click on the wireless adapter and choose put updated driver

  Select "Automatically search for updated driver software" this month may start a download to install a newer driver.

  Here is a link that can also help. HP PC - troubleshooting wireless network and Internet (Windows 10) 

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  "To show recognition for my efforts, please click on the" ","inch Up Icon " below.

• sharing wireless with Windows 7 and Windows XP, mine is Vista.

  Periodically, I share a wireless connection with a computer laptop Windows XP and Windows 7.  When I connect mine to the internet (Vista), the other two are disconnected from the internet.  How do fix us this?

  Hello
   
  We recommend that you run the troubleshooter in Windows 7 and Windows XP Internet connection sharing to find what is causing the problem.
  
  On Windows 7, try the following steps.
  1. open the utility network troubleshooter by right-clicking the network icon in the notification area, then click on the problems.
  2. follow the instructions in the wizard.
   
  Why can't I connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
   
  On Windows XP, try the following steps.
  1. click on start and then click Help and Support.
  2. under Pick a help topic, click fixing a problem.
  3. in the left pane, click Networking problems.
  4. in the right pane, click Internet connection sharing convenience store.
   
  For more information, see this link: http://support.microsoft.com/kb/308021
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• Internet connection issues "Limited or no connectivity." and "windows could not find a certificate to log on the network.

  I'm so unable to connect to the internet?

  Hello.

  I'm so unable to connect to the internet.

  Since I've renamed our WiFi network and add a WEP key, I have problems with wireless connection on my
  Windows XP computer desktop, which is a Dell Dimension 4700.

  The questions that I get connection are...

  "windows could not find a certificate to log on the network.

  "Limited or no connectivity."

  I did all the solutions I could try to fix the connection problem!

  1. once I received the message "limited or no connectivity", I click with the right button on the connection and click on repair. It is not always connect for me and I got the "limited or no connectivity message.»

  2. then, I disabled the network connection and then enabled. That no longer works.

  3. I tried to withdraw from the ordered list of connections, and it still doesn't work.

  4. I checked the driver manager, and initially the Ethernet driver was outdated and missing of its pilot. He had a yellow question mark with a black sign and yellow with an exclamation mark inside.

  5. I used DriverZone, downloaded the driver, installed and rebooted the computer after the installation of the it. Apparently, it worked. But I could not always connect.

  6 I have ensured that I entered the correct WEP key, and then adjust the settings correctly. I did it like 10 times in a row and would not always connect.

  7. I tried to go to the command prompt and typed in IP Config/All and that's what I mean.

  Windows IP configuration
  Node type: unknown
  Active IP routing: no
  WINS proxy enabled: no
  ETHERNET connection to the Local network card
  State of the media: Media disconnected
  Description: Intel PRO/100 VE Network Connection
  Ethernet card 2 wireless network connection:
  Suffix the connection-specific DNS: (EMPTY)

  8. after that, I typed the command: ipconfig/release
  and then I got this error...

  No operations can be performed on the connection to the local network, although it has its media disconnected.

  9. after that, I tried Googling for some solutions, and the solutions I found were not any use.
  A solution was

  10. opening of Services...
  Start | Run | Type: services.msc | Click OK |
  Scroll down to and double-click Client DNS | Set to automatic on startup
  type |
  Click apply | Click the Start button | When it starts, click OK
  Do the same for the DHCP Client.
  Do the same for the remote procedure call (RPC).

  and it still doesn't work.

  11. when I look in the menu network connections, I see my connection with a lock on the side, with a red X under the lock and key. In the description, I see not connected, protected by a firewall. How could I remove the internet connection firewall? I disabled the firewall and that did not work.

  12. I tried to uninstall and reinstall the network card and who does not work either.

  It is not the network itself that is the problem.  It is not the modem or the cable. There are no disconnected son or something like that. We have other computers in the House and the internet works fine on other computers. As I said, since I renamed our WiFi network and added a WEP password, I had problems with connecting to my Windows XP computer.

  My computer has updates that must be installed as well. Updates would fix the problem? I just need to have internet.

  What should I do? Thank you for your time.

  Sincerely,

  Justin

  Have you tried to set the value of the link speed/duplex mode? I had the same problem you describe. Your card is only capable of 10/100 communication.

• I unchecked the "notify me when this connection is limited or no connectivity" for my windows wireless and LAN connections, but the icons still appear in sys tray when it is disconnected.

  Hello

  I use my Intel client to manage my wireless network connection in Windows XP Pro SP3. (I need to use the Intel client because it supports protocols wireless not supported by the Windows client).

  I would like to remove the icon from the system tray/notification area Windows wireless network connection and cannot find a way to do it.

  I opened the network connections, right click and choose 'properties' and in the general tab at the bottom there are two check boxes "Show icon in notification area when connected" and "notify me when this connection is limited or not connectivity ' which I disabled (I did it for my local network also), but the icons still appear in the status bar when it is disconnected.

  
  Any suggestions?

  Thank you

  Bob

  I found a registry change that removes the icon in the systray.  One needs only to remove these keys (save the first):

  [HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E}]

  [\DefaultIcon HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E}]

  [HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E} \InProcServer32]

• 'absorbing the network address' and ' limited or no connectivity "messages...

  have a WRT54G2 router G wireless connected to the Mac (OSX) and a modem cable Comcast (Arris.model number TM502G) who tries to connect to a laptop (with Windows XP) to wireless internet. worked fine... now when it connects, I get the following "acquiring network address" followed "limited or no connectivity"... and it does not connect to internet despite the excellent signal strength. I am at a total loss... Please help.

  If you get this error message on your computer, this means that the settings on your computer is not compitable with your wireless routers settings. Make sure that the security that you use to connect to your wireless network is her even that you have configured on your router.

  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Now, check if you are able to browse Internet on your computer.

• How to restore the network icons and properties on Windows server 2008

  Original title: network properties

  What is the best way to restore the network icons and properties on Windows server 2008.  The properties of network share folder is empty and the internet icon is missing as well.

  Hi Mitch,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.