Never over charge when downloaded, xml, very simple problem Gallery
Hi all
I'm havin a very stupid problem atm, I made this slide show very simple wich loads images via an XML file. Everything works very well locally, load slideshow images nice blablabla. But problems when I load up my server, once it is downloaded and I try t o play I get this error:
[QUOTE] Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2036: finished loading never. [/ QUOTE]
It has something to do with the .xml file that I load here as:
var request_xml:URLRequest=new URLRequest("setup.xml");
I tried to replace it with ("http://www.semagames.be/.../setup.xml" ' "), but then I got a sandbox violation error that is not solvable, unless you get signed (I read that somewhere).
The way I load the images in XML format:
<SLIDE_SHOW> <PICTURE>ImagesBw/Foto1.JPG</PICTURE> ... </SLIDE_SHOW>
The file, a great pain in the * ss, can be found here: http://semagames.be/testplaats/kutbucht/BG.swf
Anyone who can help me out here? would be greatly appreciated.
your images are tiny extension. Attach your xml file.
Tags: Adobe Animate
Similar Questions
-
Tri - very simple problem, but I can't get it
Hi, I have a little problem with a sort column.
I think it's for you, a very simple problem, but for the moment, I can't find the solution.
My topic:
SCHLUESSEL
-----------------
15
16
17
1501
1502
150101
150103
150202
15010100
15010301
15020215
...
Correct order is:
15
1501
150101
15010100
150103
15010301
1502
150202
15020215
16
17have you tried
order by to_char(SCHLUESSEL)
Ravi Kumar
-
We have a Dell Inspiron 6400 laptop. When the charger is connected the screen will become black suddenly, and you can't seem to get the screen goes again. It does not seem to close completely because when I press the power button twice (or more?) it brings back me to the password screen.
This only occurs when you run the battery, IE. not connected charger. I bought a new charger thinking that was the problem, but the same thing with the new charger.
My only thought is that it could be the battery but unwilling to spend £60 on a new if it does not solve the problem. And also the battery OK charges when the laptop is not activated.
Help needed please! Thank you very much.
Hi Tiffany - Sorry a very very late thank you for your help on this.
I've been very busy and have therefore been put off watching it. We have been surviving off the battery and when he runs out to paralyze the system / sleep mode and reload. It became quite frustrating and that's why I've decided that I really need to fix this problem.
As you the advised, I went just through the safe mode and the problem occurred again glancing at your advice it seems there must be a hardware problem. I had originally bought a spare power outlet, and this does not work then maybe it's the battery. As you suggested, maybe a qualified support store is the best solution now.
Thank you once more! I am very grateful.
-
I use vista media player, and I don't know how to download music and save to flash memory directly. Heat the vista. XP is very simple.
Hi bojanaana,
You can access online stores of in windows media player. Once you do, you can download music and video files from online stores.
For more information please visit the link below
Shop online in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/shop-online-in-Windows-Media-PlayerOnce you download the music or video you can drag and drop the music or video on the USB drive.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
MS Word opens when I try to get a glimpse of a very simple project
Hello
I'm just getting started with Captivate 8. I created a project of a slide... it's very simple, but the text... and tried to preview it. When I click on preview project option, MS Word opens a file called rindex.html and Captivate does not give me the preview mode.
* I have more than enough disk space
* I'm saving the project to my office, not a network drive or an external hard drive
Any ideas what could be causing this?
Thanks for your help.
Looks like the HTML files are configurΘ to dΘmarrer with the Word on your system, very weird, but users sometimes do strange things.
-
Download speed very slow on the wired Ethernet connection
I am currently getting 200 Mbps down and 0.3 MB/s on my desk wired Ethernet connection. I should get 200 down and 20 upwards.
- On my wireless adapter on the same router, I have ~ 18 Mbit/s to the top and about 15 Mbit/s down, which seems that the wireless adapter works fine.
- I plugged in another computer with the same cable on the same router port and got the full speed (200/20), then the problem lies within my computer.
- I made a transfer of files to and from my computer to another computer connected to the same router and I got the full speed Gigabit times come and go.
I searched high and wide on the internet and forums, and that many people have had the same problem I have, nothing of the multitude of solutions worked for me.
That's what I tried without success:
- Uninstalled the Ethernet card, deleted the drivers, forcing the new drivers to install again. No change of speed.
- Carefully checked for Virus and malware programs (crossed the registry as well), but found nothing, and nothing has been installed recently other than windows updates.
- The only antivirus I have is Windows Defender. I turned off and turned off the Windows Firewall, but speed did not improve.
- I tried with IE, Chrome and Firefox, speed with different services and all tests show similar speeds. I also used FTP to a server I have, and the speeds were the same.
- There is no other traffic devours bandwidth.
So what I have gathered so far, it's that my Ethernet card works very slow only when downloading from the internet. Within my network, it works fine.
What is a service that does not work well? If so who? I am not knowledgeable on the use of all services. I checked IPv4 and IPv6 and they both seem to be configured correctly, but I can't say that I am certain of what "correctly configured" is.
These are my specs:
HP Desktop H9 - 1215t
Windows 7 Ultimate SP1
32 GB OF RAM
64 bit
Chip Intel i7-3770
Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)
I would really appreciate some help here because this problem I'm paralyzed.
Thank you for your time,
Tom
By George, you got it!
For someone who thinks he's good at Googling, I could sure use some improvements!
The key has been the link to explanation. While I had been close to my tests, this for shows that even when you sort-of-one little-peut-be-think you know what you're doing to keep your legs unless you know EXACTLY what you are doing.
The answer was definitely Large Send Offload, but it was a little more complicated, at least to understand what really happened. Neutralization of him gave the tour, but now I work with an active v2 and it works like a charm.
I will detail what, in my opinion, happened here for those who may have similar problems so that they (you) may be able to figure out, as all cards are different and may require slightly different settings.
I live in an area where so far the download speed over fast, I was able to get is 2 Mbps, on a good day, it's usually on average 1 ~ 1.5 Mbps. download speed is between 5 ~ 20 Mbit/s.
I do a lot of video work and I constantly have to download large files on my servers. I got the computer described above about 8 months ago, and my Age (2 years) one remained on my home network.
For a week or two, I was cursing my ISP because the internet was slower than usual and very glitch. I tested my speed and got 20 down and 0.2, repeatedly. So I went through the long and technology-challenged call representative to 'help' me, I was paying for 20/2. Only option was to wait a week for a technician to come out of my house, he stressed have shot my injurybut not before you ask me, that there are faster speeds to internet available in my place. 200/20 which is 10 times what I had, so of course I went with her. In doing so the representative asked me to Exchange my modem/router for a new handle faster speeds.
When I replaced the modem/router, I found that the download speed went from 50/0.2 (after the new request speed but still with the old router) to 200/0.3~0.5 with the new router. I also had a Cisco E2000 router that I turned into a switch, which was also bogged down internet high speed (now that they have been much faster). But still the download speed has not really improved.
This long and winding history is so that you (read this with a similar problem) might find the answer to your particular problem.
Looking back when I said that the issue was in my computer because that became high speed was not quite accurate. The 'problem' was beyond my router, if the solution was in my settings with the LSO parameter. The 'problem' was not really a problem since what I see (guess) that's happened is that my ISP has been updated with equipment, and the settings on my new pc has become a problem while paradoxically not so in my old pc.
My old pc equipped with a "Realtek PCIe GBE Family Controller" and the IPv4 LSO parameter turned on, that she was no problem under the new set of circumstances ISP. 200 / 20 Mbit/s.
Then when I compared the setting on my new computer, it never crossed my mind that the neutralization of him would solve the problem.
My new pc has a Atheros AR8161/8165 controller PCI-E Gigabit Ethernet (NDIS 6.20). This adapter has a setting "IPv4 LSO" more setting "IPv4 LSO v2" and "IPv6 LSO v2" décor. I don't think that my ISP uses IPv6.
In my quest to solve the problem, I placed all of the above settings to "Enabled", without success and in my fog don't reverse these settings.
With the 3 off, it worked fine, but I got a 5 ~ 10% improvement on the download speed with the LSO IPv4 v2 enabled and the other disabled.
There is no way representing the service provider on the phone could know this, so calling them would not / has not solved the problem. Even waiting a week for the technician most likely would not have solved the problem as it would be measured using a laptop full download and the download speeds.
I'm sure this will become a problem most current internet speeds that House are starting to soar (thanks Google!), so I hope this helps those who have similar problems.
To summarize:
Click on start->Control Panel->Device Manager->network adapters-> your adapter name (mine is Atheros AR8152/8158 PCI - E Fast Ethernet Controller (NDIS 6.20), right click and select Properties. On the advance tab, find good Large Send Offload (IPv4) and change its value to disabled , and then click on OK.
If you have a Large Send Offload (IPv4) v2 try to set that to enable (with either a handicapped of course).
I hope this helps!
And thank you George.
Tom
-
Lose all images etc. when downloading via FTP
Hello
I was wondering if someone could help it, also please bare in mind this is my first site... so, my understanding of the code is some this limited. In any case, I have developed a website in dreamweaver 8. Everything looks great on my PC, can I download it on my hosting page and bang... no picture, no background... below is the code. Oh, and there are some styles I never added, but somehow was there.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title cross country course for horses</title> <style type="text/css"> <!-- body { background-image: url(Images/background_047.gif); font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 12px; line-height: 20px; } --> </style> <link href="Text.css" rel="stylesheet" type="text/css" /> <style type="text/css"> <!-- a:link { text-decoration: none; } a:visited { text-decoration: none; } a:hover { text-decoration: none; } a:active { text-decoration: none; } .style1 {font-size: 14px} .style3 {font-size: 14px; font-weight: bold; } --> </style></head> <body> <table width="101%" height="100%" border="0"> <tr> <td width="180" height="0"> </td> <td width="460" height="1000" valign="baseline" bgcolor="#FFFFFF"><table width="100%" border="0"> <tr> <td><img src="Images/place holder.JPG" width="900" height="150"/></td> </tr> </table> <table width="100%" border="0"> <tr> <td width="100"><div align="center" class="a"><a href="Index.html" class="a style1">Home</a></div></td> <td width="100"><div align="center" class="a"><a href="Jumps.html" class="a style1">Jumps</a></div></td> <td width="100"><div align="center" class="a"><a href="Course.html" class="a style1">Course</a></div></td> <td width="100"><div align="center" class="a"><a href="prices.html" class="a style1">Prices</a></div></td> <td width="100"><div align="center" class="a"><a href="Location.html" class="a style1">Location</a></div></td> <td width="100"><div align="center" class="a"><a href="#" class="a style1">Contact us</a></div></td> </tr> </table> <table width="100%" border="0" cellspacing="0" cellpadding="20"> <tr> <td><div align="center"><img src="Images/horses 033.JPG" width="700" height="400" /></div></td> </tr> <tr> <td><p class="style1"><strong>Prices</strong></p> <p>To hire the course is strictly by appointment only, closing at 9pm during the summer. </p> <p>W </td> </tr> </table></td> <td width="180"> </td> </tr> </table> </body> </html>
No sense? I'm sure there's a very simple reason, however, I really can't see it. Probably something to do with, uh, I don't know code.
In addition, really really stupid question. But once I have the code sorted, how to get my page to go "online". I use host dad, it seems to be in the right section, etc., in fact, I tried several sections, but none of the work.
Big thank you to anyone who can help me understand this.
See you soon
Fans
The index page
http://www.scorriercrosscountrycourse.co.uk/Index.html ... I have to go with the - Index.html - and the 'I' should be capitalized. Now of course, I've not linked correctly, but I don't really know how.
Rename your Index.html index.html page (no capital I, make lowercase). This is probably the reason why the index page does not load upward when you type your domain name directly.
Make the change of name in the files, DWeaver Panel updates all your linked pages etc. like this, NOT to do otherwise (through Explorer windows for example), otherwise, DW will not know that you have changed the name and all your link will be broken.
Oops, see PZ already mentioned, even if I didn't see it when I posted... it was addressed only the issue of the image of thought. :-)
--
Nadia
Adobe® Expert community: Dreamweaver
Unique templates CSS | Tutorials | SEO articles
http://www.DreamweaverResources.com
--------------------------------------------------
-
Stuck with ORA-30937 when inserting XML in the table...
Hello
We are in 10 gr 2 (10.2.0.3.0)
I've never been so far with XMLs...
and I followed as well as Marc can messages and XML and relational views:
DB XML FAQ
I have saved the schema, renamed tables XMLTYPE that I needed...
but when I try to insert my XML data in the XMLTYPE, I get this error:
ORA-30937: no schema definition for 'WORKBENCH_PROJECT' (namespace ") in parent ' / '.
I think I need to display the xml, xsd, and code as well:
XML is:
<? XML version = "1.0"? >
< WORKBENCH_PROJECT >
< BaseCalendars >
< calendar
name = "Standard" lastUpdatedDate = "2001-07 - 10 T 09: 04:08" >
< / calendar >
< calendar
name = "Tunbase" lastUpdatedDate = "" 2008-02 - 21 T 12: 01:30 ' lastUpdatedBy = "sacchaud" > "
< days >
< day departure = '2008-01-01' isWorkDay = "false" / >
< day departure = finishing '2008-03-20' = '2008-03-21' isWorkDay = "false" / >
< day departure = "2008-04-09" isWorkDay = "false" / >
< day departure = '2008-05-01' isWorkDay = "false" / >
< day departure = '2008-07-25' isWorkDay = "false" / >
< day departure = '2008-08-13' isWorkDay = "false" / >
< day departure = "2008-11-07" isWorkDay = "false" / >
< / days >
< / calendar >
< calendar
name = 'SPAIN-BASE' lastUpdatedDate = "" 2008-11 - 28 T 10: 11:53 ' lastUpdatedBy = "ashwkulk" > "
< days >
< day departure = '2008-01-01' isWorkDay = "false" / >
< day departure = "2008-01-07" isWorkDay = "true" >
< go >
< Shift start = "08:00:00" complete ="12:00:00" / > "
< Shift start = "13:00:00" complete ="17:00:00" / > "
< / travel >
< / day >
< day departure = '2008-03-20' isWorkDay = "true" >
< go >
< Shift start = "08:00:00" complete ="12:00:00" / > "
< Shift start = "13:00:00" complete ="17:00:00" / > "
< / travel >
< / day >
< day departure = '2008-03-21' isWorkDay = "false" / >
< day departure = '2008-05-01' isWorkDay = "false" / >
< day departure = '2008-08-15' isWorkDay = "false" / >
< day departure = '2008-10-13' isWorkDay = "true" >
< go >
< Shift start = "08:00:00" complete ="12:00:00" / > "
< Shift start = "13:00:00" complete ="17:00:00" / > "
< / travel >
< / day >
< day departure = "2008-12-08" isWorkDay = "false" / >
< day departure = '2008-12-25' isWorkDay = "false" / >
< day departure = '2009-01-01' isWorkDay = "false" / >
< day departure = "2009-01-06" isWorkDay = "false" / >
< day departure = '2009-04-10' isWorkDay = "false" / >
< day departure = '2009-05-01' isWorkDay = "false" / >
< day departure = '2009-10-12' isWorkDay = "false" / >
< day departure = "2009-12-08" isWorkDay = "false" / >
< day departure = '2009-12-25' isWorkDay = "false" / >
< / days >
< / calendar >
< / BaseCalendars >
< PoolResources >
< PoolResource
resourceType = '0' inputTypeCode = '0' ADO = "FGASNIER" userFlag2 = "false" userFlag1 = "false".
fullName = "Gasnier Florian" firstName = "Florian" isExternal = "false" isActive = 'true '.
ResourceID = "FGASNIER" managerUserName = "PIDUPUIS" employmentType = "3" userNumber2 = "0.0".
userNumber1 = '0,0' userText2 = 'POWEO' userText1 = "' UDDI EUC + ' openForTimeEntry = 'true'"
emailAddress = '[email protected]' LastName As String = "Gasnier" isRole = "false" trackMode = "2" >
< Calendar CalendrierBase = 'FRANCE' >
< days >
< day departure = '2008-12-26' isWorkDay = "false" / >
< day departure = "2009-03-23" Finish = "2009-03-25" isWorkDay = "false" / >
< / days >
< / calendar >
< curve name = 'availability' type = '1' default = "1.0" / >
< / PoolResource >
< PoolResource
resourceType = '0' inputTypeCode = '0' ADO = "mmazelei" userFlag2 = "false" userFlag1 = "false".
fullName = "Kounde, Guillaume" firstName = "Guillaume" isExternal = "false" isActive = 'true '.
ID = "GKOUNDE" managerUserName = "PIDUPUIS" employmentType = "3" userNumber2 = "0.0".
userText3 = "RE7' userNumber1 = '0,0' userText2 = 'Poweo' userText1 =" ' UDDI EUC + ' openForTimeEntry = 'true' "
emailAddress = '[email protected]' LastName As String = "Kounde" isRole = "false" trackMode = "2" >
< Calendar CalendrierBase = 'FRANCE' >
< days >
< / days >
< / calendar >
< curve name = 'availability' type = '1' default = "1.0" / >
< / PoolResource >
< / PoolResources >
<>projects
< project
UID = "AJWF [& quot;" / A_ "'? & quot; GW:R'! '''? "P" ' 0 "baseTime =" "2008-10 - 02T 17: 33:10" closed = 'false' "
Active = 'true' approved = 'false' userText2 = 'Poweo' userText1 = '& amp; "D EUC +" start = "" 2008-10 - 02T 08: 00:00 ""
openForTimeEntry = 'true' format = '0' trackMode = '2' lastUpdatedDate = "" 2009-03 - 09 T 17: 25:03 ""
"baseFinish =" "2008-10 - 02T 17: 00:00" end = "2012-12 - 31 T 17: 00:00 ' baseStart =" "2008-10 - 02 T 08: 00:00" "
priority = "10" finishImposed = "true" cpmType = "0" name = 'ID-ID-Poweo recipe' startImposed = 'false '.
program = 'false' lastUpdatedBy = "lletaill" >
baseline <>
< baseline
Description = "P.Dupuis pilgrims © ation" code = 'Main' name = "ReferencePrincipale20081002" "
current = "true" / >
< / basic lines >
< resources >
< resource
requestStatus = '1' lastUpdatedBy = "JRATAJAK" resourceID = "lletaill" openForTimeEntry = "true".
lastUpdatedDate = "" 2009-01 - 06 T 16: 10:59 "bookingStatus ="15">"
< curve name = "allowance" type = "1" default = "1.0" / >
< curve name = 'rate' type = '1' default = "1.0" >
<>segments
"< start of the segment =" ' 1900-01 - 01 T 00: 00:00 "Finish =" 2008-10 - 02 T 00: 00:00 ' rate '0.0' = >
< / segment >
"< start of the segment =" "2008-10 - 02T 00: 00:00" end = "2010-01 - 01 T 00: 00:00" rate = "0.008880555555555555" >
< / segment >
"< start of the segment =" "2010-01 - 01 T 00: 00:00" Finish = "2013-01 - 01 T 00: 00:00 ' rate '0.0' = >
< / segment >
"< start of the segment =" "2013-01 - 01 T 00: 00:00" Finish = "2079-06 - 03 T 00: 00:00 ' rate '0.0' = >
< / segment >
< / segments >
< / curve >
< / resource >
< resource
requestStatus = '1' lastUpdatedBy = "EDAUDIFF" resourceID = "EDAUDIFF" availTo = "" 2009-02 - 14 T 00: 00:00 ""
openForTimeEntry = "false" lastUpdatedDate = "" 2009-02 - 16 T 15: 09:50 "bookingStatus ="15">"
< curve name = "allowance" type = "1" default = "1.0" / >
< curve name = 'rate' type = '1' default = "1.0" >
<>segments
"< start of the segment =" ' 1900-01 - 01 T 00: 00:00 "Finish =" 2008-10 - 02 T 00: 00:00 ' rate '0.0' = >
< / segment >
"< start of the segment =" "2008-10 - 02T 00: 00:00" end = "2010-01 - 01 T 00: 00:00" rate = "0.008880555555555555" >
< / segment >
"< start of the segment =" "2010-01 - 01 T 00: 00:00" Finish = "2013-01 - 01 T 00: 00:00 ' rate '0.0' = >
< / segment >
"< start of the segment =" "2013-01 - 01 T 00: 00:00" Finish = "2079-06 - 03 T 00: 00:00 ' rate '0.0' = >
< / segment >
< / segments >
< / curve >
< BaselineDetails >
< BaselineDetail
"Start =" "2008-10 - 02T 08: 00:00 ' baselineCode = 'Main' Finish =" 2008-10 - 02 T 17: 00:00.
costSum = "1283.2" usageSum = "144000.0" duration = "1.0" >
< curve name = "costCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "0.04455555555555556" / >
< / segments >
< / curve >
< curve name = "usageCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "5.0" / >
< / segments >
< / curve >
< / BaselineDetail >
< / BaselineDetails >
< / resource >
< resource
requestStatus = '1' lastUpdatedBy = "JRATAJAK" resourceID = "JZARIOUH" availTo = "" 2010-12 - 31 T 17: 00:00 ""
"openForTimeEntry ="true"availFrom =" "2009-01 - 05 T 00: 00:00" lastUpdatedDate = "2009-01 - 05 T 15: 19:32.
bookingStatus = "15" >
< curve name = "allowance" type = "1" default = "1.0" / >
< curve name = 'rate' type = '1' default = "1.0" >
<>segments
"< start of the segment =" ' 1900-01 - 01 T 00: 00:00 "Finish =" 2008-10 - 02 T 00: 00:00 ' rate '0.0' = >
< / segment >
"< start of the segment =" "2008-10 - 02T 00: 00:00" end = "2010-01 - 01 T 00: 00:00" rate = "0.008880555555555555" >
< / segment >
"< start of the segment =" "2010-01 - 01 T 00: 00:00" Finish = "2013-01 - 01 T 00: 00:00 ' rate '0.0' = >
< / segment >
"< start of the segment =" "2013-01 - 01 T 00: 00:00" Finish = "2079-06 - 03 T 00: 00:00 ' rate '0.0' = >
< / segment >
< / segments >
< / curve >
< / resource >
< / resource >
< task
UID = "AJ; & apos; Y6'? 1_'' ' ? & quot; GW:R'! '''? ' "P" ' 0 "baseTime =" "2008-10 - 02T 17: 33:10" start = "2009-02 - 16 T 08: 00:00.
proxy = 'false' critical = "false" status = '0' lastUpdatedDate = "" 2009-03 - 09 T 17: 25:03 "outlineLevel = '3'"
"baseFinish =" "2008-10 - 02T 17: 00:00" end = "2009-02 - 16 T 17: 00:00 ' summary = 'false' baseStart =" "2008-10 - 02 T 08: 00:00" "
baselineDuration = "1.0" milestone = "false" name = "RE7 - awareness" fixed = "false".
Locked = 'false' key = 'false' lastUpdatedBy = "lletaill" percComp = "0,0" unexpected = "false" >
<>assignments
< assignment
status = '0' lastUpdatedBy = "lletaill" actualWork = "0,0" ResourceID = "EDAUDIFF" start = "" 2009-02 - 16 T 08: 00:00 ""
baselineWork = "144000.0" unplanned = "false" estPattern = "3" actualThrough = "" 2009-02 - 16 T 00: 00:00 ""
«Finish = "" 2009-02 - 16 T 17: 00:00 "="144000.0"remainingWork lastUpdatedDate =" 2009-03 - 09 T 17: 25:03»
estMax = "1.0" >
< curve name = "basic" type '2' default = '0.0' = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "5.0" >
< calendar >
< days >
< day dayOfWeek = 'SUN' isWorkDay = "false" / >
< day dayOfWeek = 'MY' isWorkDay = "true" >
< go >
< Shift start = "08:00:00" complete ="12:00:00" / > "
< Shift start = "13:00:00" complete ="17:00:00" / > "
< / travel >
< / day >
< day dayOfWeek = 'SAT' isWorkDay = "false" / >
< / days >
< / calendar >
< / segment >
< / segments >
< / curve >
< BaselineDetails >
< BaselineDetail
"Start =" "2008-10 - 02T 08: 00:00 ' baselineCode = 'Main' Finish =" 2008-10 - 02 T 17: 00:00.
costSum = "1283.2" usageSum = "144000.0" duration = "1.0" >
< curve name = "costCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "0.04455555555555556" / >
< / segments >
< / curve >
< curve name = "usageCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "5.0" / >
< / segments >
< / curve >
< / BaselineDetail >
< / BaselineDetails >
< / assignment >
< / assignments >
< BaselineDetails >
< BaselineDetail
"Start =" "2008-10 - 02T 08: 00:00 ' baselineCode = 'Main' Finish =" 2008-10 - 02 T 17: 00:00.
costSum = "1283.2" usageSum = "144000.0" duration = "1.0" >
< curve name = "costCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "0.04455555555555556" / >
< / segments >
< / curve >
< curve name = "usageCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "5.0" / >
< / segments >
< / curve >
< / BaselineDetail >
< / BaselineDetails >
< / task >
< / tasks >
< BaselineDetails >
< BaselineDetail
"Start =" "2008-10 - 02T 08: 00:00 ' baselineCode = 'Main' Finish =" 2008-10 - 02 T 17: 00:00.
costSum = "2566.4" usageSum = "288000.0" duration = "1.0" >
< curve name = "costCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "0.08911111111111111" / >
< / segments >
< / curve >
< curve name = "usageCurve" type = "2" default "0,0" = >
<>segments
"< start of the segment =" "2008-10 - 02T 08: 00:00" end = "2008-10 - 02 T 17: 00:00" rate = "10.0" / >
< / segments >
< / curve >
< / BaselineDetail >
< / BaselineDetails >
< / project >
< / project >
< / WORKBENCH_PROJECT >
-------------------------------
XSD is (it was automatically generated by the "Stylus Studio" tools... so I changed a few stuffs up):
<? XML version = "1.0" encoding = "UTF-8"? >
< xsd: Schema targetNamespace = "http://www.oracle.com/xsd/projet.xsd."
container = "http://www.w3.org/2001/XMLSchema" elementFormDefault = "unqualified".
xmlns:xdb = "http://xmlns.oracle.com/xdb".
xdb:storeVarrayAsTable = 'true '.
xmlns = "http://www.oracle.com/xsd/projet.xsd" >
< xsd: element name = "WORKBENCH_PROJECT" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT ref = "BaseCalendars" / >
< xsd: ELEMENT ref = "PoolResources" / >
< xsd: ELEMENT ref = "Projects" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "BaseCalendars" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Calendar" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PoolResources" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "PoolResource" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PoolResource" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT ref = "Calendar" / >
< xsd: ELEMENT ref = "Curve" / >
< / xsd: SEQUENCE >
< xsd: attribute name = "category" / >
< xsd: attribute name = "emailAddress" / >
< xsd: attribute name = "employmentType" use = "required" type = "xsd: Integer" / >
< xsd: attribute name = "FirstName" type = "xsd:NCName" / >
< xsd: attribute name = "full name" use = "required" / >
< xsd: attribute name = "hireDate" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "inputTypeCode" type = "xsd: Integer" / >
< xsd: attribute name = "isActive" use = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use "isExternal" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use "isRole" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "lastName" use = "required" / >
< xsd: attribute name = "managerUserName" type = "xsd:NCName" / >
< xsd: attribute name = "ADO" use = "required" type = "xsd:NCName" / >
< xsd: attribute name = use "openForTimeEntry" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "Resource ID" use = "required" / >
< xsd: attribute name = "resourceType" use = "required" type = "xsd: Integer" / >
< xsd: attribute name = use "trackMode" = "required" type = "xsd: Integer" / >
< xsd: attribute name = use "userFlag1" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use "userFlag2" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "userNumber1" type = "xsd: Decimal" / >
< xsd: attribute name = "userNumber2" type = "xsd: Decimal" / >
< xsd: attribute name = "userText1" / >
< xsd: attribute name = "userText2" type = "xsd:NCName" / >
< xsd: attribute name = "userText3" type = "xsd:NCName" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Projects" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT ref = "Project" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Project" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT ref = "Baselines" / >
< xsd: ELEMENT ref = "Resources" / >
< xsd: ELEMENT ref = "Tasks" / >
< xsd: ELEMENT ref = "BaselineDetails" / >
< / xsd: SEQUENCE >
< xsd: attribute name = use "UID" = "required" / >
< xsd: attribute name = "active" use = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "authorized" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use "baseFinish" = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "baseStart" = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "baseTime" = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "closed" use = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use "cpmType" = "required" type = "xsd: Integer" / >
< xsd: attribute name = "complete" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "finishImposed" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use 'format' = "required" type = "xsd: Integer" / >
< xsd: attribute name = use "lastUpdatedBy" = "required" type = "xsd:NCName" / >
< xsd: attribute name = "lastUpdatedDate" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "name" use = "required" / >
< xsd: attribute name = use "openForTimeEntry" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "priority" use = "required" type = "xsd: Integer" / >
< xsd: attribute name = "programs" use = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "Use DΘmarrer" = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "startImposed" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use "trackMode" = "required" type = "xsd: Integer" / >
< xsd: attribute name = "userText1" use = "required" / >
< xsd: attribute name = use "userText2" = "required" type = "xsd:NCName" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Base lines" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT ref = "Baseline" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "basic" >
< xsd: complexType >
< xsd: attribute name = "code" use = "required" type = "xsd:NCName" / >
< xsd: attribute name = "use" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "description" use = "required" / >
< xsd: attribute name = "name" use = "required" type = "xsd:NCName" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Resources" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Resource" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Resource" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Curve" / >
< xsd: ELEMENT minOccurs = '0' ref = "BaselineDetails" / >
< / xsd: SEQUENCE >
< xsd: attribute name = "availFrom" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "availTo" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "bookingStatus" = "required" type = "xsd: Integer" / >
< xsd: attribute name = use "lastUpdatedBy" = "required" type = "xsd:NCName" / >
< xsd: attribute name = "lastUpdatedDate" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "openForTimeEntry" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = 'requestStatus' use = "required" type = "xsd: Integer" / >
< xsd: attribute name = "Resource ID" use = "required" type = "xsd:NCName" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Tasks" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Task" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Task" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT minOccurs = '0' ref = "Assignments" / >
< xsd: ELEMENT minOccurs = '0' ref = "BaselineDetails" / >
< / xsd: SEQUENCE >
< xsd: attribute name = use "UID" = "required" / >
< xsd: attribute name = "baseFinish" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "baseStart" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "baseTime" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "baselineDuration" type = "xsd: Decimal" / >
< xsd: attribute name = "category" / >
< xsd: attribute name = "critical" use = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "complete" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use 'fixed' = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use 'key' = "required" type = "xsd: Boolean" / >
< xsd: attribute name = use "lastUpdatedBy" = "required" type = "xsd:NCName" / >
< xsd: attribute name = "lastUpdatedDate" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use 'locked' = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "milestone" use = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "name" use = "required" / >
< xsd: attribute name = "outlineLevel" use = "required" type = "xsd: Integer" / >
< xsd: attribute name = use "percComp" = "required" type = "xsd: Decimal" / >
< xsd: attribute name = using the "proxy" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "Use DΘmarrer" = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "status" use = "required" type = "xsd: Integer" / >
< xsd: attribute name = "summarized" use = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "unexpected" use = "required" type = "xsd: Boolean" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Assignments" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Assignment" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Assignment" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT minOccurs = "0" maxOccurs = "unbounded" ref = "Curve" / >
< xsd: ELEMENT minOccurs = '0' ref = "BaselineDetails" / >
< / xsd: SEQUENCE >
< xsd: attribute name = use "actualThrough" = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "actualWork" = "required" type = "xsd: Decimal" / >
< xsd: attribute name = "baselineWork" type = "xsd: Decimal" / >
< xsd: attribute name = use "estMax" = "required" type = "xsd: Decimal" / >
< xsd: attribute name = use "estPattern" = "required" type = "xsd: Integer" / >
< xsd: attribute name = "Finish" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "lastUpdatedBy" = "required" type = "xsd:NCName" / >
< xsd: attribute name = "lastUpdatedDate" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "pendActSum" type = "xsd: Decimal" / >
< xsd: attribute name = "pendEstSum" type = "xsd: Decimal" / >
< xsd: attribute name = use "remainingWork" = "required" type = "xsd: Decimal" / >
< xsd: attribute name = "Resource ID" use = "required" type = "xsd:NCName" / >
< xsd: attribute name = "DΘmarrer" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "status" use = "required" type = "xsd: Integer" / >
< xsd: attribute name = "unexpected" use = "required" type = "xsd: Boolean" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Calendar" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT minOccurs = '0' ref = 'Days' / >
< / xsd: SEQUENCE >
< xsd: attribute name = "CalendrierBase" / >
< xsd: attribute name = "lastUpdatedBy" type = "xsd:NCName" / >
< xsd: attribute name = "lastUpdatedDate" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "name" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Days" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT minOccurs = "0" maxOccurs = "unbounded" ref = "Day" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Day" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT minOccurs = '0' ref = "Travel" / >
< / xsd: SEQUENCE >
< xsd: attribute name = "dayOfWeek" type = "xsd:NCName" / >
< xsd: attribute name = "Finish" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "isWorkDay" = "required" type = "xsd: Boolean" / >
< xsd: attribute name = "DΘmarrer" type = "xsd:NMTOKEN" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Travel" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Shift" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Shift" >
< xsd: complexType >
< xsd: attribute name = "complete" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "Use DΘmarrer" = "required" type = "xsd:NMTOKEN" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Curve" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT minOccurs = '0' ref = "Segments" / >
< / xsd: SEQUENCE >
< xsd: attribute name = "default" use = "required" type = "xsd: Decimal" / >
< xsd: attribute name = "name" use = "required" type = "xsd:NCName" / >
< xsd: attribute name = use "enter" = "required" type = "xsd: Integer" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Segments" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Segment" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Segment" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT minOccurs = '0' ref = "Calendar" / >
< / xsd: SEQUENCE >
< xsd: attribute name = "complete" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "rate" use = "required" type = "xsd: Decimal" / >
< xsd: attribute name = "Use DΘmarrer" = "required" type = "xsd:NMTOKEN" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "BaselineDetails" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT ref = "BaselineDetail" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "BaselineDetail" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: ELEMENT maxOccurs = "unbounded" ref = "Curve" / >
< / xsd: SEQUENCE >
< xsd: attribute name = use "baselineCode" = "required" type = "xsd:NCName" / >
< xsd: attribute name = use "costSum" = "required" type = "xsd: Decimal" / >
< xsd: attribute name = "duration" use = "required" type = "xsd: Decimal" / >
< xsd: attribute name = "complete" use = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = "Use DΘmarrer" = "required" type = "xsd:NMTOKEN" / >
< xsd: attribute name = use "usageSum" = "required" type = "xsd: Decimal" / >
< / xsd: complexType >
< / xsd: element >
< / xsd: Schema >
---------------------------
Here is the procedure for registration of the scheme and rename XMLTYPE tables:
PROCEDURE install_schema (p_schema IN VARCHAR2)
IS
l_res BOOLEAN;
l_nested_table_name VARCHAR2 (50);
l_parent_table_name VARCHAR2 (50);
l_iot_index_name VARCHAR2 (50);
l_continue BOOLEAN: = TRUE;
BEGIN
BEGIN
-load XSD/XML in the table
sipmo_XML_utils.charger_xml ('XSD_DIR', p_schema);
EXCEPTION
WHILE OTHERS THEN
dbms_output.put_line (' error loading of in, err ='|) SQLERRM);
l_continue: = FALSE;
END;
IF l_continue = TRUE
THEN
-Diagram of the removal
BEGIN
dbms_output.put_line ('deleteSchema in progress...) ');
-"projet.xsd".
() DBMS_XMLSCHEMA.deleteSchema
SCHEMAURL = > 'http://www.oracle.com/xsd/ ' | p_schema
, DELETE_OPTION = > dbms_xmlschema. DELETE_CASCADE_FORCE);
EXCEPTION
WHILE OTHERS THEN
dbms_output.put_line (' ko deleteSchema ' |) SQLERRM);
NULL;
END;
END IF; -l_continue = TRUE
-Removal of resources:
IF l_continue = TRUE
THEN
IF (dbms_xdb.existsResource ('/ public /'| p_schema))
THEN
DBMS_XDB.deleteResource ('/ public /'| p_schema);
END IF;
l_res: = dbms_xdb.createResource ('/ public /'| p_schema, BFILENAME ('XSD_DIR', p_schema));
IF l_res
THEN
dbms_output.put_line ('createresource OK');
ON THE OTHER
dbms_output.put_line ('createresource KO');
END IF;
END IF; -l_continue = TRUE
-Schema of creation of the:
IF l_continue = TRUE
THEN
BEGIN
dbms_output.put_line ('REGISTERSCHEMA in progress...) ');
DBMS_XMLSCHEMA. REGISTERSCHEMA)
SCHEMAURL = > 'http://www.oracle.com/xsd/ ' | p_schema
, SCHEMADOC = > BFILENAME ('XSD_DIR', p_schema)
, CSID = > NLS_CHARSET_ID ('AL32UTF8')
local = > TRUE
, genTypes = > TRUE
, genBean = > FALSE
genTables = > TRUE);
EXCEPTION
WHILE OTHERS THEN
dbms_output.put_line (' ko REGISTERSCHEMA ' |) SQLERRM);
l_continue: = FALSE;
END;
END IF; -l_continue = TRUE
COMMIT;
IF p_schema = "projet.xsd".
AND l_continue = TRUE
THEN
dbms_output.put_line (' XML rename tables ' | p_schema);
-First... the enventuelle dropper table main "WORKBECH_PROJECT."
BEGIN
EXECUTE IMMEDIATE ' drop table 'WORKBENCH_PROJECT "";
EXCEPTION
WHILE OTHERS THEN
NULL;
END;
-Resource table
Select table_name
in l_nested_table_name
of user_nested_tables
where parent_table_column = ' "XMLDATA". "" "" PoolResources '. "" PoolResource' '
and parent_table_name like '% WORKBENCH_PROJECT ';
EXECUTE IMMEDIATE "Rename" ' | "" l_nested_table_name | "" "to PROJET_RESSOURCES ';
Select index_name
in l_iot_index_name
from user_indexes
where table_name = 'PROJET_RESSOURCES '.
and index_type = 'IOT - TOP';
Index of IMMEDIATE'alter EXECUTE ' ' |. ' l_iot_index_name |' "and rename it PROJET_RESSOURCES_I1';
-Table projects/tasks
Select table_name
in l_nested_table_name
of user_nested_tables
where parent_table_column = ' "XMLDATA". "Projects '." "Project '." "" Task"". "" The task""
and parent_table_name like '% WORKBENCH_PROJECT ';
EXECUTE IMMEDIATE "Rename" ' | "" l_nested_table_name | "" "to PROJET_TACHES ';
Select index_name
in l_iot_index_name
from user_indexes
where table_name = 'PROJET_TACHES '.
and index_type = 'IOT - TOP';
EXECUTE IMMEDIATE ' alter index ' ' |. ' l_iot_index_name |' "and rename it PROJET_TACHES_I1';
-Table of the project/tasks/Activities and (+ main table)
Select table_name, parent_table_name
in l_nested_table_name
l_parent_table_name
of user_nested_tables
where parent_table_column = ' "XMLDATA". "Projects '." "Project '." "" "" BaselineDetails '. "" "" "BaselineDetail '." " Curve"'
and parent_table_name like '% WORKBENCH_PROJECT ';
EXECUTE IMMEDIATE "Rename" ' | "" l_nested_table_name | "" "to PROJET_ACTIVITES ';
Select index_name
in l_iot_index_name
from user_indexes
where table_name = 'PROJET_ACTIVITES '.
and index_type = 'IOT - TOP';
EXECUTE IMMEDIATE ' alter index ' ' |. ' l_iot_index_name |' "and rename it PROJET_ACTIVITES_I1';
-Main table WORKBENCH_PROJECT
EXECUTE IMMEDIATE "Rename" ' | "" l_parent_table_name | "" "to WORKBENCH_PROJECT ';
dbms_output.put_line ('rename XML tables... end');
ON THE OTHER
dbms_output.put_line (' rename XML tables...) NOT DONE ");"
END IF; -p_schema = "projet.xsd".
END install_schema;
---------------------------------------
Here is the procedure of inserting data into XMLTYPE table (where I get the error)
* insert into WORKBENCH_PROJECT values (xmltype (bfilename('XML_DIR','P21002635_2.xml'), nls_charset_id ('AL32UTF8'))); *
+ In my idea, I think I should load the full XML in my table XMLTYPE WORKBENCH_PROJECT... +.
and more and then interrogate him with better performance... more
--------------------------------------
Note that the same XML file is already loaded into a table containing an XMLTYPE column...
So, I really wonder if I need to do both?
----------------------------------------
In any case, I hope that you will be able to help me... and that my explanation is clear...
Thanks in advance,
OlivierOliver
I don't know where you got the impression that I said that the DOM would be better. It will be definitely worse. The only advantage of the evaluation of DOM based (or functional) is that it can handle a much wider range of XQuery and XPath expressions. However there is nothing in what I saw in your examples the SQL execution path is not be be able to manage the only way you get the performance you need is to get the work of path of execution of SQL. To get the job of re - write, you will need to avoid wildcards and get the fix for the bug.
I hate to disappoint you, but your XML schema is actually quite simple, it is certainly not in a class, that I would not complex, for recording results in a hierarchical structure very simple, unique, with 42 nested tables, if you want to see an example of something I would consider as complex search the Web for the FpML or NIEM schemas , recording these patterns result in recursive structures with multiple nested tables 1000!
I see nothing in your XML schema that would make the use of wildcard characters required (with the exception of running in this bug). For tasks and Instance/tasks / * are identical in your use case as a tasks element can contain one or more elements of task, not do I see anything that would make me think that some how transform XML CSV would make it easier to load.
My number 1 recommendation is to apply the 10.2.0.4.0 patch or upgrade to GR 11, 1 material. According to your deadlines, you can also consider 11 GR 2 beta.
-Mark
Published by: mdrake on April 10, 2009 14:28
-
How can I add two very simple Questions to a slide?
Hello
I would like to be able to add two very simple questions to a slide, but don't know if (or how) this can be achieved. I've explained this more in detail below:
====================================================================================
Scenario of
The slide must contain two questions:
Question 1: with two check boxes for the options Yes and No
Question 2: with five check boxes for options 1 2 3 4 and 5
A button (for example named Submit) to verify the responses from users by triggering a tip Action that verifies the radio buttons that have been selected.
====================================================================================
The checkbox Widget looks like it could work for this scenario, because it allows each value to be assigned to a variable. However, when you try to put in place the tip Action I couldn't see all the variables I named in the checkbox Widget.
If anyone has done this kind of thing before and can offer advice on the best way to create custom questions, I'd appreciate any help.
For reference, I use 8 Captivate.
Thank you
Ross
I indeed used interactions of checkboxes or radio buttons many times for this kind of slides. That's why I'm confused and I first want to know if you want an answer to the second issue as well? For the first question, it is clear that you need an interaction of option buttons, I don't know if you want to allow more than one choice for the second question. Only when you need to allow more than a choice will you have the interaction of check boxes, in the other scenario, option buttons will do the trick. It makes a big difference, because the radio button widget has only one associated variable that will store the selected element. For the widget checkboxes, you need a variable for each choice.
Maybe my blog could help clarify, you can also download a descriptive table with all interactions of CP8 training
Advice - Training interaction - Captivate blog
BTW, I moved this thread to the Quizzing subspace.
-
Create quizzes very simple function
Greetings,
I tried to create a very simple function that records click on the buttons "right answer" and what right answers is 3, the user is taken on a label that has fine text on this. Nothing fancy, just by clicking on text (or should it be text converted to symbol?), which increments a variable and when it == 3 it goes to a label on the timeline.
Here is the code I have... but it doesn't seem to work...
i = 0;
{sym.$("ques1Yesbtn","ques2Yesbtn","ques3Yesbtn"). Click (Function ()})
i ++ ;
If (I == 1) {}
Q1 = 1;
}
If (I == 2) {}
Q2 = 1;
}
If (I == 3) {}
Q3 = 1;
}
var gotoFinishedLabel = q1 + q2 + q3;
If (I == 3) {}
read the chronology of the given position (ms or label)
SYM. Play ("finished");
}
else {}
read the chronology of the given position (ms or label)
SYM. Play ("quesHome");
}
});
Thanks much for any help!
AB
You will find a demo file download here: quizz.zip - box
A few highlights:
(1) the scene:
(2) an element:
(3) code:
Thus, a few explanations.
County of jQuery for you:
- because it refers to the questions together to add click event ==> sym.$(".question").on ("click", function () {...
- because it returns [good] answers how much I ==> var count = sym. $(".answered") .length;
I add 'responded' class to the element current ==> sym. $(this) .addClass ("answered"); I assumed that the answer is correct.
-
Help required for a very simple HTTP connection to a remote server (not localhost)
Hello
FlashBuilder 4.x is very promising, but the system is very difficult to use and very simple data binding operations making becomes a daunting task. In addition, the documentation is terrible, and it seems that each example Adobe has ever published of concerns localhost and not on a remote server. What happens if we do not use localhost, Adobe?
Please, can you show me or tell me, how to link external data - even something simple like "hello world"-in a control on the page - textarea, datagrid, etc.? I want to use the HTTP services or return some HTML/XML/JSON - or even nothing. Whenever I try to connect, I get an error saying the URL I entered contains an error and I need to check the settings etc. Here my script, which is a ColdFusion script just returns (valid) XML. I also have a crossdomain.xml in the root of the server file and the script works fine when the seizure in the browser, etc..
Enjoyed all the examples. Really want to dumping FB4.6 in the trash at the moment, because simple things that can be coded by hand in seconds become enormous tasks in FB
Kind regards
Mark
Nevermind, I finally remove FlashBuilder and installed Corona. A written my first application in an hour, FlashBuilder is a dinosaur compared to Corona. Corona which supports also a lot faster and the documentation is much better. FB is bloatware and much too bulky. If you want quick results and an API that works out of the box, I would advise you to Corona. I spent many wasted hours juggling FB and it does not only deliver.
-
How to make things very simple...?
I'm always familiarize myself with the Text Layout Framework methods and Classes. I looked up how to do two very simple things.
Someone more familiar with this framework can give me a lead?...
1. How can I get the text of markup for a TextFlow? I know how to import text markup - but where is accessible after that?
2. I can see how to set the focus of selection - but how what I lose? Unfocus?
The TextConverter class has an export function. It converts a TextFlow to either an XML or a string object.
Containers TLF lose focus when the focus moves elsewhere - in general, this happens automatically.
See the example for more recent code posted here:
http://opensource.Adobe.com/wiki/display/tlf/text+layout+framework
HPE that helps,
Richard
-
Help: HTTPService very simple edition
I've created a very simple test:
<? XML version = "1.0" encoding = "utf-8"? >
"" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute".
Width = "100%" height = "100%" >
< mx:Script > <! [CDATA]
Import mx.rpc.http.HTTPService;
[Bindable]
public var srv:HTTPService;
[]] > < / mx:Script >
< mx:Label text = 'Works is - this?' / >
< / mx:Application >
This application is rendered by tomcat here: http://jc.studiogdo.com (you can test)
The HTTPService is declared, you can see that nothing is made! On a local computer (tomcat running on my localhost), and then it works on IE. On a real server as in this example, nothing works! Of course, without declaring the HTTPService everything works... I created this example with Flex Builder2 on eclipse
useProxy is false, so no need for a crossdomain.xml. Where is the error?
Thank you much for the help...In fact when using simple HTTPService, Flex Data Service should be used (FlexSwfServlet instead of tomcat servlet by default...) otherwise strange behavior occurs
-
Download indicator doesn't work when downloading from Itunes
Using my Mac OS mountain lion and Firefox ver 31.3 ESR when I download Itunes https://www.apple.com/ca/confirm/itunes/thankyou.html it seems to go to apples 10.x.x.x network but does not download and the download indicator shows no visible download proceed.
To fix this problem which seems to only happen to download Itunes.
Tempted to symptom: download the Itunes software seems to start and you can some data to be downloaded from the site, but the file once it is finished and you see no download activity in display download icon never appears.
Reset Firefox fixed the problem
-
Piece of Apple's music hangs when downloading
Hello
Very often when I play an album on Apple music track hangs when downloading. Download line is blue, but nothing happens. Sometimes, after a long while, is starting. When I double click on the track, he goes to the next and when I double click on it once again the track begins to download and play immediately. It is with iTunes on Mac OX 10.11.5 12.4.1.6. It was the same with previous versions. The Internet connection is fine when I test if a track is suspended. I have to add that I am using Airplay, but it makes no difference what camera I'm streaming to.
Best regards
Werner.
Hey wdonne!
It is important to be able to download music and listen to it unless it is interrupted. So, lets take a look and see which is the cause because you mentioned that what is also happening on previous versions.
First, take a look at this article here that helps out with downloads not completing: If an iTunes Store purchase suddenly stops downloading
We want to do is to reinstall iTunes to see if it would deal with the issue if the steps above does not. Here, this article gives you the steps on how to do it: OS X El Capitan: reinstall the applications that came with your Mac
If it still does not after you complete these steps, we need to isolate the problem more far away to see what is the cause.
What we want to do next is to test in an new user account and the Safe Mode to see if it works or not. (Please note that Safe Mode, he would not listen to you, but it would allow you to see whether or not the download ends.) After these two, it allow you to isolate the problem more far away to see what is causing the problem.
Have a wonderful day!
Maybe you are looking for
-
The first generation wireless charger Apple Watch will be compatible with series 2 Watch?
Apple Watch of first-generation wireless charger won't be compatible with the new watch series 2? I just have to make sure before I buy a new charger wireless with my new watch.
-
How "inspect element" arrived on my right click menu?
I have installed several addons when it appeared. Anyone know where this right click menu item came? My research has suggested "firebug" - whatever that is. This isn't on my XP but it's on my Vista and both have the same addons.Thank you
-
Satellite Pro A300 Touchpad has stopped working
As the title suggests. My laptop is a Satelltie Pro A300 2 4. The Touchpad is not responding, I tried FN F9 - nothing happens.I tried pressing the upper left corner of the Touchpad - nothing happens.I tried to go to the mouse control panel and lookin
-
How to find a program that runs in the background.
Does not appear in the Task Manager, taking a lot of resources.
-
Z10 blackBerry help! Several problems with Z10
I bought my Z10 3 days and I noticed several questions: 1. heating and custom battery last a whole day of work2. do not receive all the alerts from the applications installed on the hub, I have to restart my phone to receive (alerts, sms, facebook an