Analysis the message. The printer display never turns off
I have photosmart all-in-one B211A..., Cq761A. My computer is the computer, and I use windows XP.
I get a message in the toolbar of the background screen where the scanner appears with a red x and saying that he could not be contacted.
I'm trying to get out and it is so fast and another pop-up screen appears which has nothing to do with it.
In addition, on the print screen will not 'sleep' mode. He did in a first time has since ceased when this thingee message began.
Hello debalas
Is the printer connected by USB or via the network? Have you tried to run the utilities diagnosis HP or HP print and Scan Doctor? If this isn't the case, you can find them on the link below.
Tags: HP Printers
Similar Questions
-
When he tells me that the print spooler is turned off, where I'm going to turn it on?
my printer works, now every time I try to print anything it tellsme the local print spooler service does not work, restart the spooler or restart the machine.
How can I restart the spooler?
Hello
· You did changes to the computer before the show?
· You receive an error with the error code?
· What is the number and model of the printer that you are using?
Method 1: I suggest you run the fixit from the link and if it helps:
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox
Method 2: You can also try the steps from the link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Reference: Solve printer problemshttp://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
-
The printer display indicates that a certain cartridge is missing or damaged, well, once I changed every 5.
I bought this printer in Greece - Europe. The ink cartridge is there code 364. Bought 5 of all here in Australia with the code 564. Can't do nothing for 2 days now. Any help
Hi Tony,.
HP customizes some products & cartridges to meet the specific needs of local customers. During your initial printer installation, the printer is automatically set itself to accept specific to a country or a region cartridges. If you take your product from this country to another country, you might not find cartridges with the same number on the label as your original cartridges. These cartridges will work in your product, even if they seem to be compatible with it. If you buy cartridges that you believe are compatible with your product and then try to install them, you pouvez see one of the following error messages: -
Had cracked screen but the phone works still. Today screen is become white, and the phone rang again. Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed
He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.
-
Get the message: do not unplug or turn off your computer-install updates 1 of 10
Original title: closing
For the past 10 times, I stopped, the message "don't disconnect or turn off your computer-install updates 1 of 10" or other similar term. What is c?
Hi bloviater,
1. the updates you are trying to install?
If you are unable to enter the Normal Mode, then try Safe Mode system restore.
Method 1:
Step 1:
You can try to start in safe mode and check if the problem occurs.
Check out the link for more information on starting your computer in SafeMode below:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
If you can start in safe mode, then try a system restore to a previous point where you have not experienced the problem.
Note: When you do the system restore to restore the computer to a previous state, programs
and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 2:
When you are able to boot into normal mode, try the following steps.
You can read the following article and try to reset the Windows Update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
my screen automatically goes on standby every 1 minute. I tried to go to control panel (change power settings). I went t maintenanace of system in Control Panel. He always does. Can anyone help. I want my screen to be open 24/7. He falls asleep all 1 minute while I watch a movie. I have to scrible wake him mouse. can anyone help please
Hi Ron21,
1 when was the last time it was working fine?2. did you of recent changes on the computer?3. the problem occur only while watching a movie?Follow the steps mentioned below:
Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questionsFirst, see if the problem occurs after Disabling the screen saver (by selecting the screen saver 'None'). If the problem persists, please turn off the sleep in the BIOS. To check the BIOS settings, please consult the user manual or contact the manufacturer of the motherboard.
In addition, please set the following group policy and see if the problem can be solved.
(1) please click Start, type group policy in the search box and press ENTER.
Expand the following item: Computer Configuration-> administrative templates-> system-> power management-> video and display settings(2) double click on "turn off the display (plugged).
(3) change the setting to "Disabled".
4) click OK.
(5) repeat step 4 or 5 to disable "turn off the display (on battery).
In addition, you can test clean boot and see if the problem occurs. If the problem goes away in the boot environment, we can use a 50/50 to quickly refine approach which entry is causing the problem.
Reference:
Reply back with the results
Referring to the link: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/b769d9b4-300e-4066-b071-da54926112d2
-
just installed thinkpoint... now, the computer does not turn off
Hello
Downloaded thinkpoint... now the computer does not turn off
never had this problem before.
Hello
Downloaded thinkpoint... now the computer does not turn off
never had this problem before.
ThinkPoint can be a virus, google for info also run superantispyware and av prog.
-
license on the old PC to turn off and turn on the new PC, or unlock.
In June 2016, I installed 6 Lightroom on my old PC to get. After about 1 1/2 months, adopted throughout the system and I had to get a new PC.
All the programs have been installed on the new PC also Adobe Lightroom 6. When you start the program, the message this program or this serial number is still active on another PC.
Like the old PC cannot be brought back to lifeI ask you the license on the old PC to turn off and turn on the new PC, or unlock.You must contact Adobe. This is a user to user forum.
Use the chat here:
-
The new App Store for El Capitan update has locked up my macbook pro. Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't. How in my machine to begin troubleshooting?
The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.
Start by:
Reset the PRAM and NVRAM on your Mac.
MacIntel: Reset of the controller (SMC) system management
Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.
If you are unable to start;
Reinstall El Capitan without erasing the drive
Please make sure that you back up.
- Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
- Select disk utility, then click on the continue button.
- Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
- Click first aid icon in the toolbar. Wait until the button is active, then click it.
- Quit disk utility and re-enter the Utility Menu.
- Select Reinstall OS X and click on the continue button.
Also, see this tip for user: basic steps for the OS X upgrade.
If this doesn't get you;
Install Yosemite or El Capitan, from scratch
Backup if possible before proceeding.
Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:
Select utility disc in the Menu Utility, then click the continue button.
When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.
Click Delete in the main window of disk utility. A panel will fall.
Define the type of Format Mac OS extended (journaled).
Click on the apply button, then wait for the done button to activate and click on it.
Quit disk utility and re-enter the Utility Menu.
Select reinstall OS X and click on the continue button.
-
Computer froze cannot open any programs or even to use the Start button to turn off.
Original title: the computer froze.
Original title: my computer (Windows XP) has frozen. -Big problem -)
Hello
Last night, I used my computer to open a load of bunch of programs of MS Access (probably asked to run a marathon when he can only walk!)
Now, I can't open any programs or even to use the Start button to turn off. How can I fix this problem or you have lost everything :-(
Thank you
Thanks - all of a sudden he started working again! Maybe this was a vacation - but I tried F8 and safe option is not come to the top.
Very old computer - but it is useful to use to return to historical documents that I don't want on my new computer.
Tnanks for the long and dedicated response :-)
-
I'll go the Mac of the victory, I can turn off my Adobe products in Win and turn them in Mac?
Lars-Olof
It depends on what products are - can tell you which? If they are products of creative cloud then Yes, you can use either platform (or both) for a subscription to creative cloud. If they are produced Creative Suite, so it becomes less likely. If they are produced CS6, you can request a one time platform swap.
-
Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something
Hi, Yona,.
The application is available for Mac machine and not a windows machine.
Concerning
Rohit
-
Whenever a time disconnecting message 'if please do not turn off or unplug your machine. Installing Update 1 of 1 "... How can this be eliminated?
Change your Windows Update settings to NEVER. Who will stop it immediately. Then leave forever to keep it from MS to do what he wants. You will then take the responsibility to do the Windows updates when they should be done once a month, a few days after the 2nd Tuesday.
I advise my clients to refuse all updates in the WINDOWS which are not labelled SECURITY.
-
Office Jet 6500, wireless, printer will not turn off.
Disconnect the power from the back of the printer for 30 seconds. Plug in and turn on.
-
How can I copy a document when the printer display always flashes missing cartridge message?
HP D110 has x, os XP: is it possible to replace the touch screen to copy a document when a cartridge is missing and the display will show only this error message? The black cartridge is there and I can still print.
Hi mrmarquar,
There is no option to print or copy without cartridge into the two slots in the cartridge. The printer needs a cartridge into the two slots, even if the Habs ink is low, it should always copy in black and white.
Maybe you are looking for
-
No sound coming from my HP Envy laptop
Product name: HP ENVY 14 Notebook PC Product number: LW398UA #ABA Serial number: {deleted personal information} Windows 7 Home Premium 64-bit Service Pack 1 My computer information are highest. I have absolutely no sound from my laptop even if I use
-
Apparent compromise Windows XP operating system files
During a scan, antiviral regular which was initiated by the provider of the antiviral software, the scan did not work properly (i.e., it is still indicating that the scan is in progress, but nothing happens - no status progress which is now 50 + hour
-
My cdrom/dvdrom is not connected to the code 19 windows I think
I need help please
-
End of Support Windows - activation request
I have a question about Vista end of support. I installed Service Pack 2, but Windows is not enabled and therefore does not as authentic a version and it asks me to enter my product key. Unfortunately, the sticker on the bottom of my laptop fell half
-
Bluetooth is not getting...
I use HP 15-r062 Tu laptop. I am facing a problem with bluetooth. Its not getting on. And also in the search I typed 'change the bluetooth setting' but it is note like that. I even tried in Device Manager, but there is nothing like bluetooth inside.