Power management: screen never turns off when it should

Similar Questions

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• How we prevent machines hibernation, off NIC Vista power management features and turn off USB devices, a company?

  Running XP and Vista SP2 clients under a forest of 15:00 2 K; However, we will migrate away XP completely. I found a number of topics on the Hueristics key in the HKLM\System\CCS\Control\SessionMgr\Power, the PnPCapabilities key on each NIC being equal to 30 or 38 (can't seem to find what it should be set on for Vista although both seem to work) and the command, powercfg h but I lack severely in the implementation of all In addition it takes on the USB bus issues. I have written a vbs script that handles the networking with absolute success, at the start of the workstation, but I have problems getting anything else to play at the same time. Any help would be appreciated! Thank you! -Josh

  This question is a bit Advanced for Windows answers Forum and is more appropriate in the Technet Forums:http://social.technet.microsoft.com/Forums/en-us/itprovistadeployment/threads where the more technical issues of Vista specialists will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why the computer turns off when it should ' t

  I have the computer and look at things and then all of a sudden he stops he can resume, but then he comes only to request password and stops I have to wait a few minutes and restart it, it works for a while and then starts all over again did a number of things to clean the disk and defrag and norton viruselp but still have some prob please h

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Troubleshooting methods:

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Never turn off display

  my screen automatically goes on standby every 1 minute. I tried to go to control panel (change power settings).  I went t maintenanace of system in Control Panel. He always does.  Can anyone help.  I want my screen to be open 24/7.  He falls asleep all 1 minute while I watch a movie.  I have to scrible wake him mouse. can anyone help please

  Hi Ron21,

  1 when was the last time it was working fine?
  2. did you of recent changes on the computer?
  3. the problem occur only while watching a movie?
   

  Follow the steps mentioned below:

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  First, see if the problem occurs after Disabling the screen saver (by selecting the screen saver 'None'). If the problem persists, please turn off the sleep in the BIOS. To check the BIOS settings, please consult the user manual or contact the manufacturer of the motherboard.

  In addition, please set the following group policy and see if the problem can be solved.

  (1) please click Start, type group policy in the search box and press ENTER.
  Expand the following item: Computer Configuration-> administrative templates-> system-> power management-> video and display settings

  (2) double click on "turn off the display (plugged).

  (3) change the setting to "Disabled".

  4) click OK.

  (5) repeat step 4 or 5 to disable "turn off the display (on battery).

  In addition, you can test clean boot and see if the problem occurs. If the problem goes away in the boot environment, we can use a 50/50 to quickly refine approach which entry is causing the problem.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/power-options-set-power-options-to-never-turn-off/f784ed6f-A594-496a-A850-553f3e18d00c

  Reply back with the results

  Referring to the link: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/b769d9b4-300e-4066-b071-da54926112d2

• Two questions. (1) RIP in media player 11 problems. (2) portable speakers do not turn off when the headset is plugged...

  Hey all. I desperately need help. I have a laptop "Durabook" with Windows XP meidand service pack 3 update.  The internal speakers have never turned off when I plug a headset or headphone cable of the adapter into the outlet. It is an option that I have figured out. All my other laptops have silenced the computer speakers when headphones are connected.

  The most frustrating problem I have is in Media Player when you use the tab OUT, when I insert a cd Ripper in the computer, it is not recognized.  If I close and reopen WMP (Windows Media Player) cd, the cover and all the info of the cd is here and ready to be torn APART. Once the cd ends and ejects I insert another cd and nothing happens. Once again, I've closed and reopened WMP and evrything is ready to be torn APART again.

  Please please help.  I can't be the only one who had this problem.  I removed all anti-virus programs, removed and reinstalled WMP, twice.

  I'd appreciate any help.

  Thank you all

  Carl aka theSTUNG1

  Hi Carl,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a parameter to extract music select "Always".
  a. open Windows Media Player 11.
  b. click Extract, click more options.
  c. click the rip music and make sure 'Always' is selection in accordance with article "Rip CD when inserted.
  d. click ok to apply the changes and restart the media player.
  e. check if the problem persists.

  See songs Rip (copy) from a CD to your computer

  Step 2: Make sure the headset is plugged into the socket on the right
  a. connect the headphones to the right sleeve and check the result.
  b. you can also right click on the volume icon and adjust the sound settings.

  See adjust the Volume of the computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Accelerometer turns off when the screen is off

  When testing my application on a Z10 android port the accelerometer turns off when the screen is off. A partial wake lock does not turn the sensor back on. A wake dim screen lock is needed to re - turn on the detector. This behavior forces the screen to be all the time when an application requires the use of these sensors.

  An example would be a pedometer recording the steps throughout the day. In order to operate the screen must be turned on by the application that runs in the background. This will cause a fast draining of the battery and is not an acceptable solution.

  On Android, a partial wake lock is enough to keep the accelerometer running.

  I think this should be reported as a deficiency, a lot of motion carried since Android applications will be blocked by this and my app port is one of them.

  Tested on system Z10, model number STL100-3. Version of the 10.1.0.273 software

  The fix will appear in MR 10.2, 10.2.1 aka.

  I recently submitted a fix for the problem.

• The screen of my laptop turns off when windows start. What is the cause and how can I fix it?

  Original title: computer failure

  the screen of my laptop turns off when windows start. What is the cause and how can I fix it. Thank you

  You have the screen image out to another monitor (one that is not plugged in fact). How you pass to the internal laptop display varies, but most cell phone companies make a combination of keys, such as Fn + F6 or something.  Looking for a symbol that looks like a monitor.  It is usually color coded and requires activation of a Fn key.

• Satellite A215-S4747 screen does turn off not moored with Dynadock.

  I am now running XP on my new laptop and I am VERY happy that I could find all the necessary drivers. A behavior while also happening is when Vista has been loaded, it is that I could not get the laptop screen turns off when it is docked. I have searched and read and followed the instructions to the letter. I'm not not a newbie lazy posting before search... it just doesn't happen as it should.

  If someone managed to solve this problem, please guide me to the promised land!

  The feature you are requesting cannot be provided by the Dynadock.
  It's a USB-dock worker with a generation of additional graphics card in and no docking solution.
  The only thing you can do is disable any action when you close the lid in power management, then close the laptop screen when it is docked with Dynadock.
  The display is off when you close the display cover.

• HP 15-r011na: laptop turns off when it is attached cable ca

  Hi, I recently picked up the upgrade of Windows 10 and since then have had problems with the laptop switching power, do not know if it is related to Windows 10 but seems a coincidence!  When I got close I use the power on the screen completely closes the button and the laptop.  When I turn it on it's ok, if I have the AC cable disconnected (i.e. using battery power) but if I have the AC cable the screen goes off, but then goes black and seems to have turned off again, and I have to press the power button to put on the.  Also, if I connect the cable so that the laptop is on it goes black immediately, and if I delete it the screen comes alive again.  Can someone tell me what's going on that I have no idea about these things, and it makes me absolutely crazy!  I would really appreciate some advice please.

  Hi @Greenjack67 ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 15-r011na HP TouchSmart and the laptop turns off when it is attached cable ca. Here is a link to test and calibrate your battery for Windows 10.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly into a different wall outlet. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  I hope this helps.

  Thank you.

• Monitor not turns off when I close the lid!

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

  You can download the manual in PDF HERE.

• HP 15 Notebook: Wifi does, said feature WiFi is turned off when it is, in fact, on?

  My wifi suddenly turned off, when I troubleshooted it says that wireless capability is turned off and when I went to turn it on, it was already activated. I tried many things including updating almost everything, but nothing seems to work. Help.

  Hi @Elexia,

  Nice day. Forums can accommodate you! Is a great place to find resolutions. I read the post about wifi, HP 15 laptop connectivity problems. I'll be happy to help you here.

  Impressive work on diagnosing the problem properly and perform troubleshooting before asking your question on the forums of HP. Kudos to you on this point. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP and it's a real pleasure to help you here.

  First off the power we need to properly diagnose if the problem is hardware or software partners.

  For clarity and to help you the best I would need more information in this regard.

  Please provide the model # complete computer.

  • When there is this first begin?
  • Any hardware changes were made such as changing the router or modem?
  • Has it started after any update an application or software? (windows, HP or other applications such as security applications)

  If the event is recent, you might want to try a system restore to a work date known well before the problem occurred. Link for restore: http://support.hp.com/us-en/document/c03327545

  If it does not please visit these links to help: http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/8499326/model/8942890/document/c04649175/

  Link 2: http://answers.microsoft.com/en-us/windows/forum/windows_10-windows_store/windows-10-wireless-capability-is-turn-off/18d989f9-bf2e-4477-b361-52a6ba4b88b3

  Link 3: http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Common-fixes-for-wireless-connectivity-issues/m-p/4831601/highlight/true#M86871

  Link 4: https://support.microsoft.com/en-in/help/10741/windows-10-fix-network-connection-issues#network-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  If none of these work, please use a wired Ethernet cable and update the bios, the chipset and Wi - Fi drivers from this link: http://hp.com/drivers that relate to your computer.

  As a last resort, please save all your data and run a recovery system to factory default this link: http://support.hp.com/in-en/document/c04758961

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.