New 40 GB HDD on Satellite A10 501 unrecognized

I have an old 10-501 with a 30 GB hard drive that just broke. I bought a new one (Hitachi, 40 GB, 5400 rpm, ATA/IDE), but it is not recognized. I went into the BIOS, but nothing.

I reformatted my old drive, and it works fine (but noisy) on a partition that is limited to half of the capacity. I have found that the problem is in the second half. It's just to say that I do not believe that the motherboard is damaged.

So I would like to know if there is any limitation on change of the HARD drive. Or any specific strick.

Thank you

No!

Yes. There are limits!
If the size of the HARD drive is too big the BIOS does not recognize the connected HARD drive!
But to be honest think I don t think the 40 GB HARD drive is too big. The laptop was equipped with a 30 GB 4200 RPM HARD drive, so in my opinion the 40 GB HARD drive should work too.

In addition the laptop supports an improved IDE (ATA-5) interface.
ATA - 5 means Ultra DMA 4 and you can expect performance of data transfer 66.6 MB/s max.

My recommendation is to test a 30GB HARD drive that supports the 4200 RPM and 66.6 MB/s max.
If you want you can try to set the BIOS default settings first before you will insert the new 40 GB HARD drive. Sometimes it helps!

Tags: Toshiba

Similar Questions

  • Need new HDD for Satellite A10

    Hello.

    As my A10 satellite hard drive had a lot of problems lately, I bought a new drive. However, when I turn on the labtop, it freezes just on the screen "select boot device". I'm not still able to enter the BIOS. I can hear the disc upward rotation, but there is no reading of it.

    The old drive was a 4200 RPM, 2 ATA-100 MB disk Toshiba while the new is a Seagate Momentus 5400.2 with 5400 RPM / MN and 8 MB cache. Anyone aware of the A10 is having problems with the new disks, or someone has a suggestion for what I should try?

    Thank you in advance.

    Hello

    How have you tried to get into the BIOS?
    Have you tried to install the OS on the new HARD drive?

    I think that the laptop does not freeze, but the BIOS can not find a boot device.
    You must insert the Toshiba Recovery CD and must try to boot from this CD.
    If you cannot select the STRANGE as boot device in the BIOS you could simply press the C button immediately after you start the laptop.
    This option allows booting from the CD/DVD drive.

    Check just

  • Satellite A10 - how to get the new job of CPU?

    Hi all

    Cut long story short:

    I own a Toshiba Satellite A10 former model Celeron 1.8 Ghz processor, running Windows XP SP3.

    Just bought a 2.5 Ghz Celeron processor SL75T, verified even FSB, same PIN, compared to the current 1.8 Ghz via Ebay.

    Do you have a swap and replace the 1.8 Ghz with the last 2.5 Ghz, the laptop is able to start, but it just hangs before entered into normal windows.

    I tried safe mode, it went smooth, however intermittently crashes, too, but unless I could enter and change some settings.

    Initially thought it was the power of thermal design of the 24.5W old abreast 35W. Although without any solid evidence to me i.e. get made reliable on temperature processor 3rd party software (coz the 3rd party software cannot run in safe mode environment), the fan is still running strong, just changed new fan not too long.

    My hunch is that, when I was in Safe Mode Windows, I could see that in the list of the hardware in the Device Manager, the processor is still showing old clocked at 1.8 Ghz and not the latest 2.5 Ghz? However, when I right click on my computer and select Properties ==> system properties, it is show 2.49 Ghz-very good, just not inside the hardware of the Device Manager list. I tried to uninstall, but it still does not work after that several reboot.

    I don't think that there is no driver for the change of processor, what should I do to avoid this 2.5 Ghz to hang up every time before, it tries to go in normal windows? I think that this should be an operating system problem I right? (not sure) Please enlighten. Thank you!!

    Hello

    in my opinion, your motherboard is not strong enough to continue to run this processor and any 2.5 Ghz Celeron processor SL75T has the same FSB and the stem.

  • Cannot start installation of recovery after the replacement of HDD - Satellite A10

    I have a satellite a10, I bought a new hard drive on ebay brand new in the package and it's a 40 GB with the Toshiba name thereon. I took the old 30 GB and put in the drive.

    Put in the original recovery CD, I got with the laptop and get the screen: "WEelcome to the toshiba recovery utility" etc, etc. HIT F1 ok but nothing happens,
    Any thoughts?

    Recovery at startup press 1 procedure and not F1 for installation in Standard mode.

  • New HDD for Satellite 1800-100

    Hello.

    I need a new hard drive for my satellite 1800-100, but I do not know which one to buy. All disks I found to date are the IDC standards 40 pins and ATA 100-133. They match my laptop? Help, please.

    Thanks in advance.

    Hi Kurt,.

    The best option is to check your hard disk for its model number. Then, you can Google for it to find its exact specifications and the purchase of a drive that is.

    HTH

  • Need new HDD for Satellite P10-304

    Hi guys.

    Does anyone know where I can buy a hard drive for the laptop above to reinstall complete

    Current hard drive is officially dead!

    Concerning

    Paul

    Hello

    I found some info on the HDD on Satellite P10:

    It can be used a 2.5 ", 9.5 mm hard disk with capacity of 30 GB / 40 GB / 60 GB / 80 GB

    -Master - IDE bus
    -9.5 mm, 2.5 HARD drive carrier
    -Support synchronous Ultra DMA 100

    So for your laptop you can buy IDE HDD up to 80 GB of capacity.

    I think you can buy it everywhere. In PC Magazine, online electronic store, eBay...

  • Question about HDD-set level on a Satellite A10

    Hello, just want to update my laptop and everything interesting. This laptop supports 160 GB?
    Maybe even, that the bigger HARD disk support this computer?
    I think on 120 GB or 160 GB of best... And do not know what to do :)
    Satellite A10...
    Thanks for the tips

    Hey there,

    I think you should try it, because I think that the machine has been delivered with a maximum of 80 GB, but I do not know. You have the following options:

    1. buy a 120 GB HARD drive around. Test it, you can not damage anything. If the drive is not recognized then bring it back to the shop and try a HARD disk with less memory (100 GB). Repeat the procedure, if the drive was recognized, hold it. :)
    2. buy a 80 GB of HARD drive, which is known to work in this machine. It's the "securely".
    3. do nothing and buy an external USB HARD drive. ;)

    I hope that I could give you some thoughts on your way.

    Welcome them

  • Satellite A10: modem port conflicts - error: 633

    Hello

    I currently have a laptop satellite A10 but im having trouble to connect to internet via modem, I have installed a new driver for my modem (modem psi) and when I try to dial up right now get error: 633 could not open port due to a conflict of port or its propaly not configured, I downloaded a new driver, but still nothing.

    I checked the ports/Device Manager and there is no port for the modem only a port for a printer of suggestions on how to solve this problem?

    Hi guys

    I ve searched and studied a lot and found this solution provided on the Microsoft Knowledge base.

    Check this document:

    * + Error message: the Modem is not installed or configured for + *.
    http://support.Microsoft.com/kb/q191444/

  • Satellite A10 problems...

    Hi, I have a laptop Toshiba Satellite A10 with Windows XP Pro and I upgraded the RAM to 256 MB 510. But... does not work all my new game on it! The laptop must be pretty hard! I've updated all the drivers... but still nothing!

    Can someone tell me what is the problem?

    Kind regards... Hans

    Hello Hans,.

    Sorry, but what does not work?

    You get an error message during playback?
    Is there a plugin missing as direct X for example. Or is the power of the graphics card to the inadequacy of this games?

    You may have a game for example?

    Good bye

  • Satellite A10: I lost the recovery CD - how do I get one?

    Hello

    I am trying to reinstall Windows XP on my Satellite A10, but I lost the recovery CD.
    I had a 'normal' Windows XP installation CD I try to use to reinstall, but installation will not take the serial number on the botton of my laptop...

    Do you know what is a workaround for this?
    And ultimately how to get a copy of the installation CD...

    Best regards

    Even

    The key that is located on the bottom of the unit is only an OEM key.
    This means that it only works with the OEM preinstalled and bundled with the laptop version. Simply said, you can't use this key with other Windows operating systems.

    If you want to reinstall the operating system from the original Windows CD, then you must use the key that belongs to this CD!

    However, you can order a new CD from recovery of the ASP in your country.
    Simply contact the guys. They might help you to order.

    Good bye

  • satellite A10: no com3 don't dailtone

    We have a toshiba satellite A10 with a modem internal toshiba. (XP OPERATING SYSTEM)
    We lost the connection while working, and when we tried to reconnect there was no dial tone.

    the modem works fine after interrogation he under the modem diagnostics, but just to be safe, I also tried another card modem with the same results.
    the line is very good, I use it now.
    in Device Manager, I could not see an entry for the ports, so I did a scan of hardware, but which does nothing and then I added a Compote via the Add Hardware icon in Control Panel. This solves the problem I couldn't see the ports in the Device Manager but now the thus created com3 has a yellow exclamation point and tells me that the device cannot start code 10.

    So I deleted all the devices of yellow exclamation point and the modem, then restarted and after that the modem is immediately recognized and installed but her agrees not and they must be added manually with the same result of yellow exclamation point.

    Some people suggest I get into the bios and remove or disable the ports and then start but bios does not even an entry for the ports. I get into the bios by keeping ESC pressed to the commissioning and in fact Toshiba adds a nice button on the control panel with HWsetup that gives the same options.

    so now, I ran out of options and turn to experts for help.

    Thanks, Leo

    Hello

    Code 10 means that this device cannot start. I'm a little confused about your problem. First COM 3 is a virtual port and it is normal that this port is invisible. If this port is visible, it must be with exclamation yellow because it's the virtual port, no real hardware. But it is not necessary be installed with the Add Hardware Wizard.

    Your problem can be caused by many things.

    1. delete all entries with yellow exclamations. Search for hardware changes again. Now new modem is installed, and my opinion is that should now work correctly. But remember: you must make the new dial-up network connection and old must be deleted. It is very important because the old a lot of content of information settings that installed new Modem cannot use more. Also check the properties of your modem.

    2. after the installation of your modem card, there may be some conflicts with Modem from Toshiba. If you do not use the modem card all maybe more, is useful to delete all installed software.

    3. it is also possible that you have some dialer installed on your machine. Check it!

    If that doesn t work, please let us know. And if you create your connection again, tell us what a problem was.

    BR

  • What for Satellite A10-PSA10A-3V1KK miniPCI WiFi card?

    Hello

    I have an old Toshiba Satellite A10-PSA10A-3V1KK and I would like to add a WiFi card in the miniPCI slot.

    I understand the initial documentation that the optional cards at that time were PA3212U-4MPC and PA3273U-2MPC (my favorite, as being compatible WPA). However, these references seem quite hard to find now...

    Are there other, more recent references, 100% compatible with my Satellite A10, that I might consider?

    Thanks for your help,

    * CPP *.

    As much as I know there is no references to the old models of laptops, and I don't think that old notebooks are tested with new material. So everything you can find about this is info you already have.

    If you want to use the faster wireless network card using new WLAN standards you use PCMCIA WLAN cards.

  • Satellite A10 - need tools and utilities

    Hello... I'm new here...
    I have a second hand Toshiba Satellite Pro A10 - PSA15E. There were a lot of things out of place on the hard drive so I wiped and reloaded Windows XP... no prob is so far away... then I realized I would need a disk tools and utilities to charge different drivers... Oops... I don't have that when I got to the machine. So my question is simple... can anyone help?
    I managed to download a sound card driver, but there are other things - I need drivers wireless to start... When I go to the Toshiba website (this one), they do not seem to have my computer laptop, class among the T & U disk downloads? ... so any help / advice / copies of the disc etc would be welcome... specially since I can't find an email address for customer Toshibe!

    Thanks guys... Andy.

    Hello!

    Are you looking for in the Archives?
    Go to the driver of Toshiba download page und look again:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
    * Archive *-online-online Satellite satellite a series => Satellite A10

    Good bye

  • Should re-install XP on Satellite A10 - I use the restore CD?

    Hello

    I have a laptop series satellite (A10), bought new 2 years ago.

    Recently it has been running very slow and after a lot of advice, I decided to reinstall windows.

    I can do this with the product recovery cd supplied with my computer? I have the 3 original supplied with the computer disks. If it is possible, how? I read on another post (for another series PC Toshiba laptop) that this is to boot from the cd by pressing c when starting the computer - is it right for the A10?

    The process is this difficult? I have an external hard drive to back up files, etc.

    Cheers for any help

    Phil

    Hello

    If you really want to reinstall your system, use the recovery CD.
    First, you should back up your important data on the external drive.

    Then, as you already know, boot from the recovery disk #1 by pressing 'C' at the start of the laptop.
    (This sometimes does not work, then you will need to press F12 for the boot menu, or press ESC to enter the BIOS to change the boot priority.)

    If the computer starts from the disk (Win98), then simply follow the menus that appear (it's really easy!).
    But remember, the whole HARD drive will be formatted.

    Good bye

  • Satellite A10 S203: sound does not work - just enough

    Hello!

    To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

    Any tip?
    [email protected]

    First check the status of the sound card in Device Manager.
    If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

    Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

Maybe you are looking for

  • Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)?

    Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)? It was purchased at Apple December 2013. He is a certified refurbished by Apple

  • I've just updated TB I was running two clients installation 1 now have server problems

    I run two clients TB since an installation - never had any problems. I've just updated to 24.4.0 and one of these installed works fine, the other will not receive or send e-mails. I get the following error. The message send failed.The message cannot

  • Call VI with statechart

    Hi all I have an application that controls a 3D helicopter. I want to develop an application of state transitions that engine test, then test the encoder and finnaly lauch the VI that control the helicopter. How can I call a VI with a State of the st

  • Board of Directors of the system

    System: Pavilion TS grade 11 - 010nr Does anyone know if the HP 730894-501 (A6 CPU) can be used in a laptop computer with the HP 730893-501 (A4 CPU) motherboard?

  • Update of the system of Microsoft

    My computer is a number of product p7-1534, H2N63AA #ABA, running 64-bit Windows 8.1.  In the HP Support Assistant tab in storage, Backup & Recovery, there is the Refresh of Microsoft System.  Does this do exactly what the name suggests - re - instal