New Airport Express. C4780 is unable to find the network

Similar Questions

• AirPort Express added to "AirTunes" music to the network

  Hi guys, just a quick bit of advice of you would be good - I want to add an AirPort express to my set up as a dedicated "iTunes Speaker." So far, I have used a 1st generation Apple TV as my extension of iTunes, but this has made me now, and I don't need a model later that I don't need the video capabilities of it - I just need something to the music of airtime either my iPhone or, for most of the time, iTunes on my MacBook Pro.

  My network is as follows:

  Internet comes to DSL modem cable, which is connected to the Wan 2nd generation (500 GB) airport Time Capsule for LAN and WiFi. ATV has been directly linked by ethernet (via a Netgear switch) and my MacBook and iPhone use WiFi (802.11n 5 GHz)

  While I was looking for the original to the current model Express Airport (A1392) and using that passthrough network local ethernet of the TC to the switch (which continues to provide my TV, games console box, etc.) and possibly use it as a WiFi extender too (further strong WiFi to the garden for example - the TC is on the floor and it's down) , but then I thought - the oldest AirPort Express (A1264) allowed? And rather than go through the ethernet LAN of the floor (because it doesn't have two WAN/LAN ports, as the current model), but rather just hanging the switch via ethernet and to connect it to my amp to pump music iTunes/iPhone?

  If I had to, I would still be able to use it as a way to extend the range of my 802.11n network (that I don't know if 1 model made gen only 2.4 or 5 GHz)

  A1264 models are fairly cheap on eBay these days and would be an inexpensive way to add music streaming capabilities in my set up.

  Thank you!

  the old AirPort Express (A1264) usable?

  Yes

  And rather than go through the ethernet LAN of the floor (because it doesn't have two WAN/LAN ports, as the current model), but rather just hanging the switch via ethernet and to connect it to my amp to pump music iTunes/iPhone?

  It works

  If I had to, I would still be able to use it as a way to extend the range of my 802.11n network?

  Yes

  (as I don't know if 1 model made gen only 2.4 or 5 GHz)

  The A1264 can do is 2.4 GHz... or. .... 5 GHz, but not both at the same time.

• Airport Express - USB drive not visible in the finder

  I have a brand new Airport Express that I currently use as an Extender for our old time Capsule. I would like to share a USB between computers. The Aiport utility see the drive.

  

  

  However, the Finder does not show the drive.

  In the future this extreme with a USB (mini 4 TB drobo) will be in our caravan to help us to do video editing and blogging with 2 computers on the road.

  Finder are not displayed at the start of the drive, but it should display the AirPort Extreme under the Shared heading in the left side of the Finder window.

  In the example below, my AirPort Extreme (called AEBS) has a drive named 500 GB drive connected to the USB port at the back of the unit.

  

  By clicking on the AEBS, another window displays the name of the player on the right side of the window.

  

  Double-click to mount the drive on the desktop.

  

  Now you can drag and drop files on the disc icon, or open the drive and drag the files into the opened window, which represents the drive.

• I am connected to the Internet, but my new Airport Express Terminal still flashes orange. Any ideas?

  I am connected to the Internet, but my new Airport Express Terminal still flashes orange. Any ideas?

  The utility airPort on your Mac or iPhone / iPad is going to tell you why the AirPort Express is complaining... and offer a fix for what he thinks is wrong.

  If you are in need of more details, we will need to know if you are using a Mac or iPhone / iPad.  Mac, what operating system they are running to be the case as well.

• process step by step new airport express from apple with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook

  I would like a step by step process apple a new airport express with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook.

  Connect one end of the long Ethernet cable (we assume that you have already tested the cable to make sure it works correctly) one of the three ports LAN <>- on the Time Capsule to the WAN port on the AirPort Express "O".

  

  We assume that the AirPort Express is new, is powered OFF... and has not been previously configured.

  Turning off the Time Capsule

  Wait a few seconds

  Put in the Time Capsule market and let it run a full minute

  Power of the AirPort Express and run a full minute. Currently, the indicator light of the Express slowly flashing orange

  On the MacBook, click the WiFi status menu icon and search for a list of the new AirPort access point

  Just below this list, click on AirPort Express

  

  Who will get the "Assistant" operational configuration. It will take a few seconds for the wizard to analyze the network and offer the correct setting in a display that will look like the example below, except that you can see your cameras and the name of your wireless network.

  

  In short simple name you want to call the AirPort Expressof type... .as OfficeExpress, for example

  Click Next

  Watch the next screen carefully to confirm that the AirPort Express is in place to extend using Ethernet, which confirms that the installation wizard recovers the wired between the Time Capsule and AirPort ExpressEthernet cable connection, so the settings correct configuration will apply.

  

  When you see the message Setup is complete, click done. Close the installation window, and you're done.

• How to put in place the new Airport Express to extend the current wireless WiFi U-Verse home network?

  Hello

  What are the steps for the creation of a new AIRPORT EXPRESS MC414LL/A Terminal so that it make that expand my network existing wireless, using my current AT & T UVerse equipment home.  Here are the details...

  Internet service provider: AT & T U-Verse

  Existing facilities: primary AT & T provided router/Modem: ARRIS NVG589 (reference 587234-004-00) that manages my house wired and wireless Wi - Fi.

  PROBLEM: Does not offer full Wi - Fi coverage

  SOLUTION: Attempt to add a new Terminal Airport Express so that it will extend coverage of the existing Wi - Fi network wireless.  I plan on the use of certain features such as streaming my content from iTunes to my sound, surround sound, etc Airport Express Library.

  NEW FEATURE: APPLE AIRPORT EXPRESS 802.11n Wi - Fi PART # MC414LL/A

  I wish I had AT & T equipment to continue to manage the Wi - Fi and network functionality (DNS, firewall, etc.), as it currently does.  However, I want to use the Airport Express to extend Wi - Fi coverage.  I already have a cable ethernet from the floor and the AT & T ARRIS NVG589.  I just need to know how to set up my new Apple Airport Express.

  Thank you!

  With the Express connected to Arris gateway with Ethernet, you have the basis for a roaming network.

  I would recommend that you run the AirPort Utility and allow it to run automatic installation of the Express. The utility should detect that the Express is connected by Ethernet and go through the steps to properly set up. Note: If you have made any changes to the Express since out of the box, I strongly suggest that you first perform a 'factory' reset on it to make sure that the installation went well.

• I just bought a new Airport Express Terminal. It connects to my laptop, but not my other devices such as iphone/ipad. Any suggestions?

  I just bought a new Airport Express Terminal. It connects to my laptop and I have working internet, but my iphone/ipad do not work with it. They say they are "connected" to the wireless network but nothing works / charges on other devices. I tried to forget the network, by renewing the lease, etc and nothing works. Any suggestions as to why my laptop works but not other devices?

  What is the serial number and model of the modem you use?... or... The AirPort Express connects directly to the Ethernet wall port?

• Satellite Pro L20 - I need a new screen and I am unable to find a part number

  Hi all

  My L20 Pro Satt needs a new screen and I am unable to find a screen with number of part corresponding to mine.

  Can anyone provide me with the other part numbers that would fit mine.

  Thank you

  I found only a display for a Satellite L25 Pro but I guess that the two devices are very similar and use the same part of the screen.
  The display part number is K000000620 and it s a 15 XGA 1024 x 768 display.
  http://www.screentekinc.com/Toshiba_Satellite_Pro_L25--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

  You also can order the compatible display. You can contact the partner of service allowed in your country to order this part.
  But be aware that the display is one of the most expensive parts of laptop.

• I'm unable to find the missing drivers on my device manager.

  OT: Re: lack of pilots.

  Hello

  I'm unable to find the missing drivers on my device manager. A unknown device watch. Other shows, like in the storage controllers. I checked Windows update, but it does not find the missing drivers. I don't have the drivers on my CD.

  Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
  http://www.NirSoft.NET/utils/DriverView.html

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model. If the report is in one language other than English, please indicate the language.

  For assistance OneDrive see paragraph 9.3

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 firefox browser. You want to disable/remove the navigation bar. Pls Hlp

  Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
  I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.

  Help, please

  Thank you
  Vishal.

  your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul

• Unable to find the option to upgrade Windows Vista to Windows 7.

  Original title: upgrading to windows 7 NO 8

  I am writing on behalf of my grandparents. My Grandpa has thought about his laptop computer to upgrade Vista to Windows 7 but I can't find downloads to upgrade to windows 7, only windows 8, which I am sure that they used to focus on after the reaction they had trying to use my windows phone.

  Can anyone find a link with a price please? :)

  Hi Sue & Johnarbon,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to find the option upgrade Windows Vista to Windows7. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

  Try the links below and check:

   

  Links to buy the upgrade to Windows 7:

  Windows 7 Home Premium: http://www.microsoftstore.com/store/msstore/PD/Windows-7-Home-Premium/ProductID.235488300/VIP.true

  Windows 7 Professional: http://www.microsoftstore.com/store/msstore/PD/Windows-7-Professional/ProductID.216645600/VIP.true

  Windows 7 Ultimate: http://www.microsoftstore.com/store/msstore/PD/Windows-7-ultimate/ProductID.216647200/VIP.true

  For further assistance regarding the purchase, call: 1-877-696-7786.

  Reference links:

  Step_ By_ step procedure to upgrade Windows Vista to Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Windows 7 Upgrade Advisor: http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Upgrading to Windows 7: http://Windows.Microsoft.com/en-us/Windows7/products/upgrade

  If the problem persists, post your reply with the results. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• My Audio icon is suddenly missing from the taskbar. I looked at your answers and am unable to find the tab notification area. Does anyone have any other suggestions? Thank you

  I lost my audio icon - it has just disappeared.

  After having read and followed the steps suggested by other members, I am still unable to find the tab notification area. Are there any other suggestions?
  Thank you!

  Hello

  (1) you still hear sound from the computer even if the icon is missing from the notification area?

  Follow the links below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-the-notification-area-system-tray

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  http://support.Microsoft.com/kb/945011/en-us

• I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  Try to install a Windows Vista driver if there is no native driver Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer