New Audio & video cutting Insync

Similar Questions

• [Adobe Premiere 5.5] Audio is cut in half

  I noticed that I have audio problems in video clips later. The first approximately 55 clips (MOV001. MOD to the MOV032. MOD (hexadecimal), imported from a camcorder to memory) are fine, but BLAH then on the audio is cut in half which means that I heard the first half, then the sound is completely absent, until the next clip. Then you hear the first half of the audio and then it's completely absent again.

  [Audio is cut in two, because I have too many items in the current sequence?]

  If I open the files in another program, that the audio is full start at the end.

  EDIT: I discovered that the number of clibs in Prem Pro is not serious. If I start a new project, a new sequence and I put some of the clips later in the sequence, the problem persists in these clips.

  Het bericht is bewerkt door: Hans Kamp

  I found a solution to this problem (initially by browsing the topics elsewhere on the internet with a similar problem):

  -Download the handbrake;

  -Specify the map where the source of all (to convert) are;

  -Specify the plan where all destination must be stored;

  -Start the conversion;

  -In Adobe Premiere Pro, specify the new files and add them to the storyboard table.

  Then I see that it is therefore more an audioproblem.

  In a program that costs about 1000 euros (not in the case of promotion code), I would expect it doesn't have these problems.

• Audio video lag after edition clip in the first 13 items...

  System:

  Win 7 Pro 64-bit with SP1

  ICore 7

  8G ram

  Video RAM 1 G Nvidia Quadro FX 2800 M 1920 x 1200 dpi screen resolution

  DirectX Runtime 11.0

  C: 500 GB SSD

  E: 1 TB SSD

  First 13 items in Expert mode

  All the imported clips are .mp4, constant 29.97 FPS, H.264, 48 kHz, 16-bit stereo .mp3

  
  

  I added four clips to a new project and cut ahead a few seconds of the last element. After that, the video accusing the audio on a second in the playback window by I drag the time indicator current early at around the center of the clip. After, it starts fine but starts to lag after a few seconds. The first three clips have not been published and they follow as they should. This could be a type of game/option up problem?

  Thanks for your comments,

  Inter Mundos

  INTER MUNDOS

  Great news. Looks like you have sorted through your problems successfully. Great job.

  Just in case reference. Rendering of the chronology does not solve anything. It is strictly a preview feature that uses a line of color to warn you if you look at the best possible overview... no colored line or medium green without chronology made necessary or available... orange line means requires chronology made to get the best possible overview in the monitor area reading Edit. If you get no coloured line when you drag your media on the timeline for the first time, it means that your properties of the source and the project settings match... and you look at the best possible overview. Therefore, whenever you change the video, you get orange leader with all the consequences that go along with. Moving... edit, orange; Rendering of chronology, green and so on.

  I don't know if there is no promise for the clip that began the case. You might consider taking in the free Handbrake program and determine if the export of the file from here H.264.mp4 gets rid of his problems in Premiere Elements.  https://handbrake.fr/

  Best wishes

  RTA

• Video cut out of the box when importing to chronology :( What should do?

  Hello!

  My first video on my calendar and everything's fine so I.

  However when I try to import another video with the same framework, it seems that he zoomed because it cut a large part of the frame that I see even more my face . I even tried the consultation in the preview area on the top left (which seems well) until I have drag in the timeline.

  Photo 1: This is the original video

  

  Photo 2: This is the additional clip that I add that cuts out of the frame

  Something I need to specify so is, I recorded audio & video separately and them merged with the Merge option he that Premiere Pro, but that should not be a problem because I did the same thing with my first video to synchronize audio and it did not cut out of the frame.

  I'm still new to first pro and when I search for tutorials, nobody seems to have this problem. Any help?

  Thank you

  Your images, your sequence is1920x1080 is 1280 x 720, go to the settings of the sequences and change the size of 1920 x 1080.

• How to remove the video cut in Photos app

  I cut some of my video clips in Photos, and now I want to permanently delete the Junk adorned video.

  Is this possible?

  Not in the Photos - you can export video ready, remove pictures video and empty recently deleted folder and import new video cut to Photos - Photos is a DAM (Digital Asset Management) system and will always keep the original of each digital image

  LN

• Satellite R630-13R - HDMI output only for the audio/video receiver?

  I have the opportunity to play the DVD on my Satellite R630-13R with the release of his passing through the stereo jack to my amp, but now that I have to buy a new amp, I've been watching AV receivers that have the HDMI inputs and pass through the image.

  I won't have a TV screen connected for a while (until what it comes to upgrade), but can I enjoy the HDMI sound transformed in the audio/video receiver in the meantime?

  Hey,.

  Yes, you can use the HDMI connection to an AV receiver as HDMI transfer its too.

  I found a thread similar to the receiving subject audio/video HDMI. Maybe it of useful for you also if you have any problems with correct configuration:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50845

  I hope I could help you :)

• "For Audio/video on the Internet" does not open

  Hi all

  As the title suggests when I click on "for Audio/video on the Internet" nothing happens.  It seems that the icon has also changed.  I tried to look around this problem without success.  I would appreciate any assistance.

  Plaase excuse my ignorance, but it is "for Audio/video on the Internet", a program or command in a browser (maybe an add-on)?  What is doing?  Have you checked that the http://www.microsoft.com/windows/compatibility/windows-vista/Default.aspx Vista Compatibility Center to ensure that the program / module is compatible with Vista and/or Internet Explorer? If so, please provide the web site of the program (link) so we can search more far - I couldn't find using Bing (which is unusual).  The fact that it has an icon indicates it is a program.

  What was the program installed and when its last function properly (and have the correct icon)?  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Right-click on the icon and click Properties.  On the general tab, it's a file with a path - what is this parth?  Go to this path in Windows Explorer and check to see if it exists and if it contains all of the files/programs. If it is there, so we know at least that the program is on the system even if the icon does not work.  Go to the executable main real within the program and create a new shortcut icon and move whenever the icon currently exists and see if this new icon works and it solved the problem.  If this is not the case, try to do a right-click on the icon and click on run as administrator to see if you have a better chance.

  If she isn't here or the procedures above will not work (and it is a program or an add-on), then I suggest you uninstall with Revo http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html and then restart and try reinstalling it.  He may have developed some corrupted files (espcially if the icon has changed) and this may clear up the problem.

  If I'm away from base here, please tell me.  I've never heard of this product before and as I said, I don't find it with Bing, and it is very rare that the programs available.  Please explain what it is and more to hold and, if possible, provide the link of web site (I can download it me to test it and see if I have also the problem - if I have Vista Business, which does not come with Media Center and I suspect that it is associated with, if it's a program).

  I hope this helps and please get back to us with more information so that we can help you better.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Audio video players have an intermittent humming/freeze for 1-2 seconds - Dell Vostro 5470 Win 8.1

  Help - all devices audio / video have intermittent hum and freeze the video on my new Dell Vostro system 5470 Win 8.1. This happens with Windows Media player, various audio players, even in Skype!

  I see messages on the removal of the center of support Dell etc. that is not the response that users should have to live with - Dell?

  I have a XPS 17 (L702X, early 2011) and removed Dell help. This solved this problem.

• No sound on a 3GPP audio/video file!

  I recently bought a new PC with Windows 7.  I have a video file that is «3GPP Audio/video»  When I play, I can see the moving image, but there is no audio data.  Could someone help me if I can hear it?

  Should I somehow "convert" it?  I don't want to spoil the video or lose him because he is the only one I have my sister.

  Thank you!

  Hello

  This happens with some particular .3gpp files?

  If this is the case with some particular file then the file might have been encoded with a codec that is not supported by Windows Media Player.

  For more information about codecs, seeCodecs: frequently asked questions.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• 3GPP audio/video file can't be read?

  I transferred a bunch of videos from my old computer that were taken with my cell phone.  They played perfectly with Windows XP, but when transferred to this new laptop with W7, it will not play one of the videos.  They are files 3GPP audio/video.  How can I make them work?  Thank you!

  I think you had a pack of video codecs installed that allowed you to play this video.

  This Codec should allow you to play the files:

  http://ffdshow-tryout.sourceforge.NET/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• rotate the video cut off my head! : (

  I'm puzzled. I already have a video that was taken in the direction 'portrait', instead of 'landscape' (normal mode).  When editing, I had to turn each clip that was easily done.

  Now, I'm back to do more editing with new images, but the same device, same direction, same everything.  But none!-when I rotate 90 degrees to the right (as I did before) the video cuts now to the upper part of the image.  That's where my head is - MORE painful!

  Anyone know what I'm doing wrong?  I enjoyed my head for many years, it would be a shame to lose now :))

  Headless in Fresno,

  Bruce Ratcliffe

  Bruce

  I think I got the reason lost head. You all had the same 0026 and 0038 except... I think you saved the good and the bad in orientation portrait with different distances of the interlocutor (or ups closer). Therefore, in portrait orientation, there are more wall in the frame located above the speaker's head in 0026 that he didn't there 0038.

  With HD 1440 x 1080 anamorphic 16:9 project, you will get a space of 1920 x 1080 (landscape) in the editing area monitor. So, when you rotate the portrait oriented 0026 and 0038 turn right, you are going to lose sight of the content going 1080 x 1920 1920 x 1080.

  Compare... portrait 0026 and all this wall over the speaker's head space in the display of 1080 x 1920 (adjustment of the bounding box of note)

  

  with portrait 0026 turn right and with the not seen parts upper and lower... (note that the adjustment of bounding box)

  you have lost sight of the contents of the frame up and down... but you got room to spare at the top to speak not lose his head.

  

  Now the same thing for the 0038 not so good (1080 x 1920 display)

  

  with the right Rotate

  

  Solutions

  If you don't want to remake the records, click and drag the image of 0038 on the screen (in the bounding box) down to move the head in sight, but you're going to move content out of sight down. So, then put the best image you can to get everything...

  

  Please consider and let me know if the above explains your results and gives a possible way to save what you've recorded recently.

  RTA

• CS4: Setting Up separate audio/video Capture Sources

  Im still very new to PrProCS4 and I was wondering what I can met if I want to use audio/video separated the peripheral issues of capture to record directly in first. I have a Canon ZR40 cheapo camera, but instead of using his microphone embedded terrible I want to use my recording equipment with my Tascam US-144 and a microphone powered ghost as my audio device. Are there problems that im going to meet with the sync between the two, and is still possible in the first to lead the record?

  First won't be able to record live together at the same time.  It can handle only a single source FireWire at the same time.

  If you record separate sounds, the only problem you will encounter is the synchronization of clips.  Essentially, you will have to do it for every single clip in the sequence.  There is no process of simple automatic synchronization for a whole lot of clips.

  Your best bet would be to connect the external microphone on the camera and recording the sound on the tape.  This way, you will get the best audio and synchronized clips.

• Camileo H30 - Audio & video don't work synchronously with Win XP

  My computer is running Windows XP.

  I downloaded DivX 7 as an actor of HD movies.

  But when I download the videos to my computer and you try to play with the DivX 7, the sound is out of sync. But the videos shot in SD play fine.

  Any idea why this might be happening and how to fix?

  I also have the ArcSoft software installed as well.

  Hello

  I have read a lot about these symptoms and it seems that your material is not keeping up with the reading.
  The reason is that the sound plays back well, because its easy for the hardware of computers to do this, but if it is the video, the system is overloaded. The part big percentage of executives "fall": This means that they are not displayed. The frames are correctly displayed are usually late and this causes audio/video synchronization issues. If you have a video problem fell/delayed due to the computers hardware limitation.