[Adobe Premiere 5.5] Audio is cut in half
I noticed that I have audio problems in video clips later. The first approximately 55 clips (MOV001. MOD to the MOV032. MOD (hexadecimal), imported from a camcorder to memory) are fine, but BLAH then on the audio is cut in half which means that I heard the first half, then the sound is completely absent, until the next clip. Then you hear the first half of the audio and then it's completely absent again.
[Audio is cut in two, because I have too many items in the current sequence?]
If I open the files in another program, that the audio is full start at the end.
EDIT: I discovered that the number of clibs in Prem Pro is not serious. If I start a new project, a new sequence and I put some of the clips later in the sequence, the problem persists in these clips.
Het bericht is bewerkt door: Hans Kamp
I found a solution to this problem (initially by browsing the topics elsewhere on the internet with a similar problem):
-Download the handbrake;
-Specify the map where the source of all (to convert) are;
-Specify the plan where all destination must be stored;
-Start the conversion;
-In Adobe Premiere Pro, specify the new files and add them to the storyboard table.
Then I see that it is therefore more an audioproblem.
In a program that costs about 1000 euros (not in the case of promotion code), I would expect it doesn't have these problems.
Tags: Premiere
Similar Questions
-
Adobe Premiere Pro CC - imported audio problems
Hi, I ve had with audio problem. Tutorial I ve recorded (video)... It s mp4 audio and video in a clip. When I play in windows media player, its OK. But when I want to edit in Adobe Premiere Pro CC, audio is a few seconds behind the clip... And when I want to fix it and pull it forward, his lack at the start and bad at the end. I don't know what to do, please help!
---
Jiri Pechar
Is it a screenshot of your computer? And if so, the program captures the fact as a framer-variable rate (VFR) or constant rate (CFR)? Many screen capture programs are VFR, which PrPro doesn't work with. If this is the case, you will need to download a program like the freebie of the hand brake which allows you to transcode the footage to the CFR, then use in PrPro.
Download page for handbrake:
https://handbrake.fr/downloads.php
Neil
-
I use Adobe Premiere Pro CS6 on a MacBook Air. (I use an external hard drive for files and the project, don't worry). I'm editing an average movie film I already filmed and stored on my hard drive, however the audio is missing part of a clip when I open it in the program. When I play the original video in QuickTime format, the sound is fine. In Premiere Pro, the audio works at the beginning of the clip, then it just suddenly stops at a certain point and does not return. It stops at the same place everytime I play it. I tried to open Bars and tones, and I hear the tone very well. I tried to look at the audio mixer Panel, and nothing is cut or a smaller volume. I double checked to see if the clip is on and it is indeed turned on. As far as I know, there is no other clips blocking audio somehow. I tried to cut the video with the razor tool to see if he wanted to kickstart audio feedback, still nothing. I tried to change the name of the video. MTS of. AVI (tip, I found online), no change. I have really no idea what is the problem, or why the audio is missing. And I don't understand why it affects only part of the clip. The clip is around 10 - ish minutes and audio works for about the first ten seconds, then stops. He's a longer video which is about 20 minutes in the length, clip, that I'm getting is the last half of the video.
If someone could help me with this, I would really appreciate it. It's for my graduation project and it is due in like a month, so I'm a bit required for the moment. If you have any other questions, please send them!
I can't really give you a reason happens, but I can offer you some options to work around him.
Open the item in Adobe Media Encoder and export it as a WAV file. See if the Audio is finished. If so, put that in first and make a subelement with the original video file.
Again, NO idea why this might happen, but rather that why worry... Let's see if we can get your finished project.
Good luck!
-
I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?
Neil, get it fixed, I do not have the video channels set correctly on the left
side of the line of the time. Learn the new adobe; Thank you
Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>
-
Adobe Premiere Pro CC - Visual works, no audio with MOV
Help, please!
I have a clip on the timeline that the signal is not triggered, but the Visual works.
The file is a MOV and appears gray, not blue like other clips.
This is my first time working with Adobe Premiere Pro CC, so I'm a novice at this program, but not video editing.
All suggestions are welcome!
Is there a work around?
Thank you!
JANNET
Hi Jacob,
You have not inserted the audio for this element.
Click A1 as V1 is highlighted (in blue) once done drag the audio on the timeline and check.
Vinay
-
Why my video's audio is out of sync in Adobe Premiere Elements?
When I put my video in Adobe Premiere Elements, audio of the video is about 1.5 seconds at the end I contacted 6 reps and have had no help from Adobe support.
Granuke
What version of Premiere Elements and on what operating system works - it?
The audio not synchronized with the video after timeline becomes the content of the timeline?
What are the properties of your source file? And, above all, where is the from file-camcorder, mobile phone, iPhone, or other. Is the device that records video using a variable instead of a constant rate? If so, be aware that Premiere Elements (many versions) do not work well with the sources files that are saved with a variable frequency. Range of problems of desynchronization of audio should not be able to import the file at all. In these cases, the solution was to take the file in the free program of brake hand to get a version of H.264.mp4 with a constant, rather than the variable, the cadence. And then import this version in the Premiere Elements project.
Please review, study and give more details. Then we can decide on what was then based on details in your response.
Thank you.
RTA
-
Audio playback altered in Adobe Premiere Pro CC2014Sequence
We started the Assembly of a draft standard CC2014 - we work with the cloud and all our software are up-to-date Adobe said CC
The project implemented to the point - we've added an audio track - all played back fine.
As we finished the project we have had to add a second layer of audio as the last piece will be narrated by 2 narrators one until the customer decides who will read what to keep two audio in the timeline panel, and disable the file on the right. (We did this in the past without problem projects.)
That's where the problems are developed - poltergeist any as re-read us the sequence we hear various audio ghosts (for lack of a technical term) as - hear us the audio stops playing below at a lower level and distortion - but even more strange - audio playing under another part of the timeline is - so if I turned on the file below , I could now hear 3 track audio playback - 2 turned on and to place and one 3rd-audio lower flat and distorted.
Troubleshooting steps so far:
I think that hmm... perhaps it is an audio or a 3rd party software problem - I did so to disable all my audio playback software and send the audio to the desktop - problem still there
I think hmm... maybe it's a corrupted file - so I open a new project file and import the sequence - problem still there.
I think that hmm... the second audio is maybe a problem - so I delate all the sound elements to add - a single layer of the audio in the project - now the problem there re-routed self to give me the same problems, but always using the audio line in the sequence.
I think hmm... maybe it's a problem or a question of platform - I played this sequence back on 3 different computers, ranging from OS 10.8, 10.9 to 10.10
Some with and without 3rd party software. -problem still there
After 45 minutes on hold with Adobe - they agreed it needs to be examined by a specialist software - connect and chat - they ask to connect to the desktop - and unfortunately we are disconnected - no call back as of yet.
Anyone with ideas - I've heard of and seen a lot of problems with 3rd party but I trust, I ruled that - I too confident that this isn't a platform or a conflict of OS.
It really looks like a corrupted file or a bug in the software.
Audio files are a standard .mov file is saved with Adobe Premiere Pro 2014 CC capture mode.
Video files are nothing out of the norm for us - variety of photos, graphics, videos, assembled in a deliciously funny and wonderful way. Wish just that we could get the audio to work.
Hi valeriav80637310,
Welcome to the Adobe forums. We regret the inconvenience that you are currently experiencing with Premiere Pro.
Please try these steps and let us know if it works:
1. go in the preferences > media and clean the cache and re - open first to check on the issue.
2. create a new sequence of a clip that you used in the project by right-clicking and selecting 'new sequence of the clip.
-erase the media in the new sequence
-Copy all the files from the original sequence and paste them into the new sequence
Check on the issue and please let us know more communication.
Concerning
Anand Sachan
-
I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?
Rickey
Thanks for the follow-up report.
Just a lit bulb. Maybe the answer, maybe a spleen.
Look carefully at the audio track of the timeline in the vicinity of title of the file.
The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where
the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with
Volume: level as shown in the screenshot.
Hope it's the factor involved.
RTA
-
Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?
haben
Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.
A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?
You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a
Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find
presets it to the choice of QuickTime, it.
What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or
a constant rate?
Please check and review and then we'll decide what next.
Thank you.
RTA
-
Adobe Premiere Elements 13 - DVD Audio output
Adobe Premiere éléments 13 can create DVDs with 5.1 surround sound, or it will convert my simple stereo surround soundtracks such as items 11 ?
Hello
First 13 elements converts also the audio in stereo when exporting to DVD
Kind regards
Team first Elements -
Hello!
We are working on Mac two of the editor with the same characteristics.
10.10.3 OSX
AJA Kona 4 12.2.1 firmware
Lawo Crystal
Adobe Creative CC 2015
We have a problem with one of the two Macs. The entries of the AES of the Aja are unstable. Sometimes the recorded sound is saturated. There is sometimes no sound on AES inputs (verified with Adobe Premiere) while we are healthy on the output of the Lawo Crystal which is connected to Aja. Our wiring is tested works. Our system is unstable works half of the time. Sometimes just restart Adobe Premiere that it works, and sometimes it isn't.
We are working on Mac two of the editor with the same characteristics.
10.10.3 OSX
AJA Kona 4 12.2.1 firmware
Lawo Crystal
Adobe Creative CC 2015
We have a problem with one of the two Macs. The entries of the AES of the Aja are unstable. Sometimes the recorded sound is saturated. There is sometimes no sound on AES inputs (verified with Adobe Premiere) while we are healthy on the output of the Lawo Crystal which is connected to Aja. Our wiring is tested works. Our system is unstable works half of the time. Sometimes just restart Adobe Premiere that it works, and sometimes it isn't.
Have you contacted support AJA yet?
Thank you
Kevin -
Hi all! I'm having a problem with the help. WMV in AE, Premiere Pro and Media Encoder. Whenever I open the picture in a sequence or the source window, the image is cut in half horizontally (see photo below). I brought in a MP4 and had no problem so for now, I think I've narrowed to strictly a. Problem WMV. The file plays perfectly fine in real time; sounds great, photo (from what I can see) seems good; Miss me just the top of half of all hehe to WMV file. I tried the WMV inside AE as well but that you have the same problem. I also tried to export WMV with Media Encoder but it exports the WMV cut in half any format I said the file conversion to...
My Premiere Pro, AE and Media Encoder are perfectly up-to-date; My 660 it from Nvidia is up-to-date; I just installed latest Windows 7 codec package; Just installed Windows 7 x 64 new updates.
Also, it is a great note... It is the first time I used the first Pro/AE/Media Encoder on this system. I just built this PC about 1 month ago and have had 0 problems with it other programs (Photoshop, 3ds max, etc...) I recently installed first, AE, Media Encoder on it and am running on this problem on my first start of first/AE/Media Encoder.
My system specs are displayed below the photo and file specs.
The photo below shows my configuration and the question that I have. Finding Nemo video on the left is the. MP4 (file specifications are below) and the video on the right is the. WMV in question (also sheet below).
I tried several different bitrates WMV, etc., and each of them do this 'cut in half thing..' No problem with other types of files well!
The. WMV is...
Type: Windows Media
File size: 8.5 MB
Image size: 1920 x 1080
Frame rate: 29.97
Audio Format: 44100 Hz - 16-bit - stereo
Project Audio Format: 44100 Hz - 32 bit floating point - stereo
Total duration: 00; 00; 00 14
Pixel format: 1.0
The. Specifications of the MP4 are...
Type: MPEG Movie
File size: 1.4 GB
Image size: 1920 x 1080
Frame rate: 23.976
Audio Format: 48000 Hz - compressed - stereo
Project Audio Format: 48000 Hz - 32 bit floating point - stereo
Total time: 01:40:47:21
Pixel format: 1.0
Created by: Adobe After Effects (Windows) CS6
My system specs are below.
------------------
Information System
------------------
Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318) - 1533
Language: English (regional setting: English)
System manufacturer: ASUS
System model: all series
BIOS: BIOS Date: 19/04/13 17:27:15 worm: 08.01
Processor: Intel Core i7 - 4770K CPU @ 3.50 GHz (8 CPUs), ~3.5GHz
RAM: 32768MB RAM
Available OS memory: 32706MB RAM
Page file: 8393MB used, 57018 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11
DX setup parameters: not found
DPI setting: Using System DPI
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7601.17514 64 bit Unicode
If I think of any information that may help narrow this question, I will surely post it! Thanks for your help everyone.
-Mitch
Win Update breaks WMV http://forums.adobe.com/thread/1252244
-
Help ~! Adobe Premiere Pro exports the poor quality video...
I'm testing in order for use to YouTube videos of Adobe Premiere. No matter what I do, the problem I have, it is the quality of the exported video, doing not well and it's frustrating... = me '(je voudrais que quelqu'un qui sait ce qui pourrait se passer à me dépanner ici!)
Therefore, the screen that I was working. This character, I drew... I'm trying to use it in the clip. The left is the original, right, how he showed first upward instead (a little too zoomed in). Accordingly, I decided to reposition him and him a bit fits back in effect... not too bad so far.
So as I said, this was just a test clip so I tried even second-clip. This export press, I made the following adjustments:
No. correspond to the parameters of the sequenceFormat: H.264
Screening: YouTube HD 1080 p 23.976Yes , export the video and export audio
No Gaussian blur
Width 1 920
Height 1 080
Frame rate: 23.976
Order on the ground: progressiveAppearance: Square Pixels (1.0)
TV standard: NTSC
Profile: highLevel: 4.0
No. made to maximum depthEncoding Bitrate: VBR, 2 pass
Target Bitrate: 15
Maximum flow: 25
Yes distance keyframe: 72No Maximum render quality
N use found
No. interpolationWith that, I queue it and export it to my office, no other changes. After I saw this however... it is really blurry. It seemed to me that if the video demoted to 240 p.
I would like to help with this, I would like to make my videos much more crisp and sharper than that... the image itself has been designed around 500 x 800 pixels, so there should not be a problem with the picture itself (I think)...
Help meh!
-SupyWell, we found the problem! You start with an image of HD quality, stuffing in a sequence to only 720 x 480 DV, losing more quality... and then export the image shrunk down is actually jumping again HD.
If you intend to export at 1080 p, then sequence settings must also be 1080 p. Think of a sequence like a picture frame. If you have a photo 8 x 10, you need, for example, a frame 8 x 10, not a 4 x 6.
Please use file > New > sequence, then AVCHD 1080 p > and then decide what rate to deliver, 30 or 24, and then choose a preset suitable to work with. What frame rate you select, and then use the same for export (in reality, it is rate of 29.97 or 23.976, rounded names for simplicity).
Thank you
-
Adobe Premiere elements 12 freeze during playback
Hello
I use Adobe Premiere elements 12.0 for about 2 years on a number of devices. I just bought myself a new machine of the host/music studio - Dell XPS 8900, i7 - 6700 k Skylake, 16 GB RAM, soundcard Realtek, double video (vga screens), a VGA port on NVidia Ge Force 645, the other running the INtel HD integrated graphics card displayport VGA.
In any case, on the new machine, I see issues with reading gel every 20 or 30 seconds at random, how I have to start it up again.
It's a bit annoying when trying to evidence look an article, but not the end of the world.
I tried made using another sound card, disconnect the audio (I read on some issues from Realtek), uninstall and reinstall the program. Nothing has worked yet.
Thanks for any help.
OK, for those who have the same problem. I solved mine away from the integrated Realtek audio device. I just ran across the same video for an hour with all the time.
I know that Realtek has caused problems in the past of my reading on this topic and he has certainly proved the case with me. It is a terrible device anyway, so move my audio from the PC to the sound card that normally, I reserve for my recording studio work is a bonus.
-
(Adobe Premiere elements 12.1). I think I went through all the possible explanations using Adobe-videos, www and You Tube. etc., but I'm still too stupid, having not yet seized the response. I am new to this, and it does everything just for me. If I manually drag the vertical red line along the timeline, then individual pictures presents during the masterscreen above, but they have almost disappeared in arriving at the other. If I press play instead, the red line is progressing fairly well, but still the same speed on the timeline, but I need an explanation to slow down or speed up the clouds-photos that I brought to the timeline. Y at - there someone here who can / will cut out in 5 mm plates of steel for me? PS. This isn't a normal video, it's 190 photographs of clouds taken with my interval-o-meter, just to know 'how' in Premiere Elements
faerk
BTW. I was arrested on my previous effort to get an answer (in Danish): you are not allowed to question here - or something like! Why?
The best way is to your slide show in a video output then re-import this video in your project and use Time Stretch to slow down or speed up playback.
How you do that depends on how you plan to use this slide show. It will be released on a DVD or BluRay disc? Uploaded to YouTube or Vimeo?
Maybe you are looking for
-
Link to BIOS 1.50 for Satellite C660D-13 q does not (404 error)
Hello Link to 1.50 BIOS for Toshiba Satellite C660D-13 q does not (error 404) - file not found.How can I get this file after all? Who should I contact for this?Any help email address? Thank you
-
Cannot access/view partition Mac into bootcamp
Hello I recently installed bootcamp on my rMBP 15 "(2015), and I was wondering if there was a way to access my Mac partition/files when I'm in my bootcamp Windows." When I navigate to 'Computer', only storage Bootcamp is planned, rather than both the
-
All of a sudden, 2 scanners on our network are not scanning. I direct scanning via my computer now rather than use the actual scanner, which is faster. That's happened?
-
Error message when Vista backup (0 x 80070002)
Hi all, need a little help with backup windows, whenever I try to start, I get error no. 0 x 80070002, this stops the backup. I tried to re - it works but always this error, I tried the backup on different media, but still does not. Any advice? Syste
-
I'm starting to set up a wireless link to another building and bought 2 of WAP54G as recommended. I also bought 4 of HGA7T as suggested [device 2]. I see the very low signal strength. even more than 50 feet. I believe I followed Fred Z guidelines in