New bug fixes with switching between tools

Similar Questions

• Switch between tools

  If I remember correctly, before the CS6, I switch tools while keeping on knocking the particular shortcut key.  Now, I use shift-the particular tool.

  I was wondering if there is a way to just push the key repeatedly to switch between the tools?

  In general, preferences, uncheck Use Shift key for tool switch.

• What will be bug fixes with El Capitan taken in charge?

  Of course, I have already installed El Capitan on my computer and now I'm having problems with the Prime Minister and reading and exporting. I can't go back on the upgrade and must be able to work/change. Would like someone at Adobe would have sent an email about these issues!

  10.11.1 update.

  Seems quite a few problems.

• Problem with switching between two streaming flv videos

  Hello! Coconut I m of course! I have 2 streaming flv videos in the timeline panel. Reading flv containers are in different settings that you can view with two buttons. Once I pass the first video in the second... When I go back to the first he won´t see the worms the top (it goes on the framework, I said, but video doesn´t load) and this position can´t go to the second. (It works fine on place).
  This is the page: www.spyltd.com.ar go to the MEDIA button.
  
  

  I thank very much for your help and excuse my English!

  Add a random variable on behalf of these two so the aborted file flv is not retrieved from the cache to the users.  for example,.

  whatever_pb.source = "diiaSkate.flv? NoCache = "+ math. Random();

• Why Firefox will allow me to have several tabs, but not allow me to switch between tabs and can only watch a new tab when closing the previous?

  Everytime I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab does not open, and I can't switch between multiple tabs. The only way to get a new tab is to close one on that I am currently, and even then it will only open the next tab in the order of precedence, so I can't even choose which tab is next to see. This problem makes it impossible to use firefox as a research tool that requires quick change back and forth between pages in multiple tabs at the same time.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes.

  Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes. It always sends Apple incident reporting, so I am surprised that they have not yet set. This is a brand new Apple iMac computer, I went for the best to have a trouble-free operation (I hate LAGS). But the computer hangs out sometimes which is disappointing. No one knows what to do to keep my computer running efficiently? In addition, someone at - it a solution to the issue with Notes crashing?

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Download and install the update of OS X El Capitan 10.11.6 Combo.
  6. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

• I get the following message:-Firefox 35.0.0.5486 this new version of Firefox contains important security and bug fixes and page offers much improved making it

  I have received several messages inviting me to download the software updates that I use. I think they are attempts to get help with phishing or such. The last "software update available" amplifies - "this new version of Firefox contains an important security and bug fixes, and much improved page rendering times offer." Is generated by anyone at Mozilla, or automatically in Mozilla? Mozilla distributes these types of messages? That Firefox is updated automatically, then these messages should have no useful function except to help with the download of some intrusive camera, which I did not need. Are there plug-ins that I should throw?

  Upgrade to Firefox 35 is currently limited and not everyone gets the new update offered at this time.
  If this is the case for you, then you can manually update via help > topic.

  See also:

  • https://www.Mozilla.org/en-us/Firefox/35.0/releasenotes/
  • https://www.Mozilla.org/en-us/Firefox/all/

• Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  In addition, pop up blocker works for a while and then stops working. I have to close and restart Firefox to make it work again. Help!

  I had the same problem, but with Firefox 4.0. My first thought was last updated to Firefox (after of course restarting FF), but it did not help and I had the same problem.

  Among others, I had an extension installed and enabled called tile tabs 4.10 I thought could easily create this problem. I went in my Add-ons Manager and disabled, restarted Firefox and tabs worked properly again. Unfortunately, the extension of the tile tabs is my favorite Firefox Add-on and I use it almost every day to manage my web tasks. I went to the page Add on for tile tabs and saw that there was a notice that version 4.10 did not work properly on Mac OS and install version 4.9 of the extension. I saw that they had a new is not-yet-seen version 4.11 who has tackled the problem of Mac OS, installed, and everything seems to work properly.

  I have no idea why all of a sudden I had this problem as I don't had not updated Firefox or the extension of the tile tabs recently. Also, obviously this could not solve your problem, especially if you have the module installed and active. But our problem started at the same time for both of us it seems based on your post time, so its probably not a coincidence.

  But its worth a quick glance and you can check other extensions if you don't have the legs of tile that might be the cause of the problem.

• Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  I changed the subject: config to make the rotation gesture to move between tabs and it worked great for well over a year. It now behaves properly, as described here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=877598

  It used to be very controllable move a tab on, now it is erratic and moves quickly and the unexpected tabs regardless of the slowness, I do the gesture of rotation. It's the main reason I use Firefox on Chrome and I will continue to do so unless there is no solution for this.

  Just put the browser.gesture.twist.threshold to something around 15-25.

• With the help of new access points with old WLC 4100; LWAPP layer 2 switching 3-tier

  Hi all

  We currently use two solutions Wiresless LAN - a 10 AP1230 access points-based autonomous (5 years) and a solution based on a Cisco WLC 4100 (4112, running 3.2) with 12 AP1010 LWAPP access points.

  First thing, we are considering to replace the stand-alone solution with the WLC one. However, I'm not sure if we can use the new access points such as the LAP1041N or the LAP1252G with our current 4100 WLC. Access reported data sheets 'Cisco Unified Wireless Network Software Release 7.0 or later version' 'software '. Does this mean that these access points can only be used with controllers running 7.0 or later?

  If we are unable to use the new access points with our current WLC and need to buy a new controller: can we use access points AP1010 current with a new WLC as the Cisco 4402?

  Second thing, it is that we want to expand the networks configured on the WLC 4100 to another site that is connected via VPN wireless. Wireless Setup guide indicates that the LWAPP mode can be changed from Layer 2 to 3 layers so that the access points can be configured with an IP address, which allows you to place access points basically anywhere as long as IP connectivity exists between the AP and the WLC.

  Y does it as described in a document with the change of mode LWAPP layer 2 to 3 layers? Or ist just the following steps (if I understand correctly):

  -Change the Mode of Transport LWAPP on the controller of layer 2 to 3 layers

  -Creation of a PA-manager interface with an IP address in the same subnet as the management interface (tried that, without changing LWAPP mode transport first and not was not possible - error)

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Is it really just as simple as that? All information about it is very appreciated!

  / edit: I would also like to know if the 1260 series access point are backward compatible with 802. 11B. Whereas it is stated in 1040 and 1250 for example series data sheets, it is not particularly mentioned in 1260 data sheet.

  Thank you

  Michael

  Well, let's start with the simple question/answer

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Yes, it's as simple as that.

  As for other issues, looks like you would be better served with a forklift upgrade.  New controllers and new AP.

  Now, the AP 1230/1240/1250. all work on the 4.2, 1140 code starts with 5.2 and 1040/3500/1260 are 7.0

  The AP 1000 series is not supported after 4.2 code.

  Refer to here for the complete list of the AP and taken codes supported:

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp610751

  From what I see, the 4100 is not supported after the train of 3.2.

  So, it really depends on what you are trying to accomplish with the upgrade.  If you are looking for a 80.211n support, you really want to be 5.2 or better, we had some problems with MRR + 40 Mhz channels, 4.2, 5 GHz band only.

• I have a problem with the mouse cursor moving left to right and not conversely when switching between screens.

  Original title: change the direction of the mouse moves from the main screen to the external monitor

  My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change

  Hi Jayson Bourne,

  Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  Change the settings of the mouse

  Method 2: Update the latest drivers/software for the mouse.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Switch between two intelligent forms with a single button?

  Hello!  I work at 8 Captivate and try to use a single button to switch between two smartshapes.  I can't for the life of me figure out how to do it.  I know its possible to make it 'show' and 'hide', but is it possible to simply create a user click on a button and whenever we click on it, it comes and goes between two different smartshapes?

  Im trying to show the user the functionality on a piece of equipment when they press a button.  When they push the button, it comes and goes between two different read out on the screen.

  Thanks in advance!

  Have you looked at the blog post that I posted a link: I offer 4 scenarios.

  It can also easily be done, if you have a separate (shape) button to switch between two different objects:

  1. Create a user with a default value of 0 v_visib variable
  2. Create two objects and one of them is visible, the other invisible output ("eye" in the Properties Panel icon); I've tagged the ShapeOne and ShapeTwo, where ShapeOne is visible at the beginning
  3. Create this advanced conditional action (you can also turn it into a shared action):

  IF v_visib equals 0
  Hide ShapeOne
  See the ShapeTwo
  Toggle v_visib
  ON THE OTHER

  Hide ShapeTwo

  See the ShapeOne

  Toggle v_visib

  4 assign this action to the success of the button event

• With the Selection tool over new layer but becomes "the selected area is empty."

  I have been working on an image in PS and I have a number of layers.  First of all, several adjustment layers.  Then I do various clean ups (especially with the cloning tool).  I make a selection and then create a new layer.  I'm on one of the layers again, I made a selection to move a part of the image, hit command-J but this time I get the error message: "could not make a new layer from the selection because the selection is empty.  I understand the error but what would you suggest to go ahead?

  Here is a picture of my current layers:

  

  Hi sutherland.

  Please visit: http://www.designtalkboard.com/tips/photoshop/layer-empty.php

  Photoshop help! Selected area is empty. ? | Yahoo Answers

  Hope that helps.

  Kind regards

  Mohit

• Acrobat Pro 9.5.5 - installed new HP printer with scanning capabilities now Acrobat will not work.  How can I fix it?

  Acrobat Pro 9.5.5 - installed the new HP printer with scanning capabilities.  Acrobat message now shows that never ceased to license.  Needs to be repaired.  I tried to fix it with no luck... don't have the original disks to yninstall and reinstall... How can I fix it?

  Hi bartonb4124479,

  Refer to this KB document for help error: "License has stopped working". Windows

  Kind regards
  Nicos

• Hello! Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  Hello!

  Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  No, I don't think.