New computer laptop freeze after power connection (there is a delay, not immediately)

Similar Questions

• HP G62 laptop computer: laptop freezes after startup

  After starting my laptop freezes.  How long after starting varies.  Sometimes it will freeze after only a few minutes. Sometimes it can be operational for an hour or two.  Want to know how to fix this.

  Tested hard drive and the Long DST failed.  Has given an ID of the failure of QAGCHR-5GH847-XDOO3A-61AKO3.  Product ID is XHO66UA #ABA.

  Hello

  Error code 24 characters is a failure of the entire test (DST) disk Self and would indicate that hard is defective and must be replaced.  This is also consistent with the freezing issues you describe.

  If you want a guide on replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• C6380 - computer laptop xp prints with connection by usb cable but not wireless

  Hello

  I have a c6380, which is about two weeks old. Setup worked fine when I put it on the wireless network and everything is ok.

  I installed the software on a vista pc which is connected by cable to my router from sky. This shows very well.

  I installed the software on a computer vista laptop that is wireless and prints well.

  I also have a computer laptop xp. It is also wireless. The software installed without problem. See the printer etc. However, when I try and print, the printer makes noise and pulls the paper, then the screen says it's printing and then nothing happens. The printer stays like that and eventually the laptop shows a failure to print the message. The document remains in the print queue before deletion, and I have to press Cancel on the printer. If I plug the printer with a usb cable for this laptopit prints without problem.

  I ping the printer wireless froom the laptop xp and access the admin screen. It also shows as a network drive in my computer.

  I uninstalled the software that came with the printer, downloaded the hp software to ensure that it is up-to-date and re installed.

  I put the printer with a static ip address.

  I restarted the router as well.

  The router uses a channel 11 broadcast key, wpa - psk and is set to g & b modes.

  Now, it's really really frustrating because the computer laptop xp my wife, is the main reason why we bought a wirelsss printer because she is a teacher and done loads of printing.

  I'm pretty good with pc / networks etc but have now run out of ideas.

  Can someone help me please?

  Thanks in advance.

  Steve

  Hello

  I've actually solved myself, but I'll keep this post here anyway.

  The answer has been upgraded from SP2 to SP3.

  Probably should have thought about that a little bit earlier!

• My new Windows 7/64 bit computer Dell freezes after being idle for 20-30 minutes

  Some basic information:
  (a) my laptop is brand new, I bought it less than a month ago and I started experiencing this problem in the beginning, very annoying.
  (b) my laptop freezes after inactivity for 20-30 minutes, I have to remove the power cable and reconnect it to restart the computer
  (c) the freezing happens daily when I have access to the Internet with Internet Explorer or Google Chrome, no difference between these two.
  (d) I have Windows 7 Home Premimum with the latest updates.
  (e) I get no error message when the computer freezes, it freezes only when idle, as when I leave my computer for 20-30 minutes
  (f) I ran the disk check, I did the clean boot and I have configured the power setting, but the problem persists.

  Can someone help me? I searched this problem on the Internet and it seems to be a common problem with Windows 7. I've never had such problems with my previous computers with Windows XP and Windows Vista.

  This isn't a common problem.

  Do you have what programs or utilities maintenance installed?

  This external devices you have connected?

  Using Dell DataSafe? If not, uninstall

  Do you wrong used windows update to install the recommended updates, as apposed to important updates?

• Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to

  Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to download several times and in different places. That is wrong. Does´NT CS5 run on El Capitan? Or what else? Thank you.

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha

• Laptop freezes after exactly 2 minutes

  My laptop freezes after exactly 2 minutes. I don't get the problem when booting in safe mode. I've disabled all services & then allowed them one at a time and the problem seems to be with BITS & Windows update. My laptop will not freeze if I let only these two services turned off. I ran the Scanner to complete MS who managed nothing found. I also ran sfc/scannow & cleaning. I have a HP G7000 Notebook running Vista Home Basic 32-bit with SP2.

  Thank you.

  What follows is a generic response.
  Among the measures that you have already done.

  There are many reasons why a PC "behaves" in this way.

  These boring "desynchronization" can be caused by an overloaded hard drive, CPU overworked, Malware, 2 AV, useless data, browser addons, or you can have unnecessary programs running in the background, etc...

  What follows is a series of steps that you want to try troubleshooting...

  * Make sure that all the intake/exhaust vents are clean as well as fans.
  Download some software temp monitoring for cpu, gpu.

  * This could be a hard drive that goes wrong or corrupt.
  To check a hard training see Check Disk...
  Run the disk check.

  * In a Directors account type cmd in search.
  Type sfc/scannow in cmd.
  This report and solve minor problems.
  Take note of what is said at the end.
  Your computer should freeze, try to do the tests in safe mode.

  * Go to search, type Manager devices and look for the yellow warning markers.

  * If overclocking, restore to the original.

  * Try in safe mode; report back if it works properly.

  * Minimum. You to find out what is causing your problem.

  http://support.Microsoft.com/kb/929135

  * Run a scan with Malwarebytes.
  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  List of all security software that you had already installed & currently now have on your computer please.

  * Browser addons can create problems.
  Check how much you have on your browsers.
  Each & every one is really necessary?

• Printing a Web page to a .pdf or .xps file generates a file but it is empty. How can I fix it? I have Firefox 40.0 on a new computer laptop for Windows 10

  When I print a Web page to a .pdf or .xps file, it creates a new file, but file Explorer says it's 0 KB in size. These .pdf files will open, but they are white - the only thing that appears is the outline of a page, without anything in the outline. When I print an .xps file, File Explorer shows that it contains 0 KB. When I try to open it, I get a message saying that the XPS Viewer cannot open the file. These things just started for me a few days after I installed Firefox 40.0 on a new computer laptop of Toshiba Satellite with 10 Home Windows operating system. I have the latest version of Flash Player (in fact, I just tried redownloading and reinstalling the current version; that does not solve the problem). I tried to change the format by default to print to .pdf file, but that has not solved the problem. I contacted the chat Windows support site; They told me that it was not a Windows problem. Is this a Firefox problem? If so, you can tell me how to solve the problem, please?

  Thank you
  ssavage

  First of all, try to disable the extensions to see if that helps this, then try safe mode.

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • The problems of Firefox in Mode safe

• Cannot install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57

  Original title: I am trying to install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57 and work willnot installation disk and I downloaded all the driver and Assistant I can find

  am trying to install my printer (hpdeskjetf4580) on my new compaq presario laptop computer cq57 and installation disc don't work and I downloaded all the driver and Assistant I can find and it still does not load. It will download and then extract but then nothing and I went to the file downloads and this is, but when I try to run it it extracts and then nothing again.

  Hello

  • What happens when you try to install the drivers?
  • You receive an error message?
  • What version of the Windows operating system do you use?
  You can try to check and clean the boot, if the problem persists, I suggest to install the software in the clean boot state and see if it works.

  To see how to perform the clean boot, click the link below.

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem followStep 7 to reset the computer to start as usual.

  You also try to run the configuration file after extraction of the files is complete from the location where extracted files were kept.

• Can I purchase/use a Windows 7 OEM on a new computer laptop with FreeDOS?

  Can I purchase/use a Windows 7 OEM on a new computer laptop with FreeDOS?

  If, therefore, in case I ever need to reinstall (on the same laptop, no change of motherboard), can be reinstalled/reactivated as usual without having to call Microsoft?

  If you buy from a seller valid an OEM version, and assuming that the manufacturer of your laptop provides drivers win7 for the appropriate bit of victory version, there is no problem.

  If you need to reinstall you may need to use the phone activation

• I installed my photosmart more b209a on a new computer laptop and say, I got error 1722

  I installed my photosmart more b209a on a new computer laptop (windows 7 64 - bit); but during the installation I get the ERROR FATAL error message 1722. .and it says "Fatal error" and "MSIFlash player"... clicked on OK and the installation continued and finished!

  Now I can print the docs and photos... but what is the meaning of it?

  I will just continue work - assuming that everything is OK - or what I need to do something about the flashplayer?

  Hi deboraey,

  If the printer works ok then the installation was successful. You can go to the following link and update Adobe Flash player on your computer.

  http://get.Adobe.com/flashplayer/

• Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD.

  Original title: how do peripheral DVD player on my laptop

  Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support. and also tried to solve the problems and see them all, then clicked on reading and burning CD and blu - ray discs and message saying could not identify the problem. then I went to windows media dvd player and the message saying that "Windows has no dectet a dvd playback device, if you do not have a dvd playback device, you will need to purchase and install a.. "If do not have a DVD player installed, contact your OEM or device for the latest driver for your particular device" Please can someone help me as its driving me crazy. Thank you

  You must have a third-party program to run Blu - ray discs.

  http://www.arcsoft.com/TotalMedia-Theatre/

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html?&r=1

  Your new PC must have provided with software to play. Otherwise, I'd contact the manufacturer and see if she did or why it didn't.

• I'm unable to install my Lightroom CD on a new computer with Windows 10. Is there a simple guide in plain English? I do not understand computerese.

  I'm unable to install my Lightroom CD on a new computer with Windows 10. Is there a simple guide in plain English? I do not understand computerese.

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

• How to migrate from Fireworks CS3 to a new computer laptop when the key to the series is lost?

  I'm migrating from Fireworks CS3 to a new computer laptop. I lost the serial key number so I can't install it again. Instead, I copied the program and export/import the relevant part of the registry. And also copied FLEXnet. However, the program comes the spirit the message "licensing for this product has stopped working". I used the ADOBE recovery tool, but nothing helped. Thanks for any ideas or help them.

  Products Adobe may not be transferred, they must be installed using installation files.  If you have an existing installation, then you might be able to get the serial number of this one.

  If it's a Windows machine, and then try running Belarc Advisor

  http://www.Belarc.com/free_download.html

  For a Mac, you can try:

  https://Mac-product-key-Finder.com/

• How can I upgrade my Photoshop CS5 to my new computer laptop of my older imac. I want to have access to the same tools, preferences, brushes, etc. on both computers

  How can I upgrade my Photoshop CS5 to my new computer laptop of my older imac. I want to have access to the same tools, preferences, brushes, etc. on both computers

  Hello

  You can install Photoshop CS5 on your new machine from this link: Download Adobe Creative Suite 5 products

  See this article for the location of the predefined settings that you can transfer manually on the new machine: functions of file Photoshop CS6 preferences, names and places

  In addition, you can check this link: Migrate presets in Photoshop CC

  Kind regards

  Claes