New copy of the XP installation disc?
How to get a more recent copy of my XP installation disc? I have the cd - key and everything, but the drive will not recognize install my hard drive to the course. So, I would just a version with the required SATA drivers. "Slipstreaming" seemed too difficult, and I was not sure of the legality. I will not buy a new copy, simply because it has become obsolete. Are there solutions to what would be simpler?
Yes, should be the case.
Don't forget the presence of the SATA drivers in this CD: contact the manufacturer of your PC, if necessary.
Good bye.
Tags: Windows
Similar Questions
-
HOW CAN I GET A NEW COPY OF THE VISTA INSTALLATION DISC?
SON HAS INSTALLED AN OLDER VERSION OF TEST OF WINDOWS 7 AND ITS A MESS AND I CAN'T FIND MY INSTALLATION FOR MY VISTA HOME PREMIUM DISC. ANY HELP?
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
Satellite Pro L10: Is it possible to get a copy of the original installation discs
Hi I'm new to the forum.
Is it possible to get a copy of the original installation for my laptop Toshiba Satellite Pro L10 diskettes?
Concerning
Anno2Hello
Of course, it of possible to get the Toshiba Recovery CD!
You can order it from the service provider authorized in your country!
Simply call the guys and order! It shouldn't be very expensive! -
The installation files are corrupted. You can buy a new copy of the program
Whenever I try to install a new software or games and then permanently in error "the Setup files are corrupted. You can get a new copy of the program.
Please help me...
first scan your computer entirely with good antivirus.
-
Please help me
Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago
Hi the prey,
· What is the brand and model of the computer?
You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.
Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.
Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.
Windows 7 Upgrade Advisor - download - Microsoft Windows
See also:
-
Versuche wondering Version neu zu installieren, kommt period insert disk 1, habe aber nur eine (already eingelegt) - try to re - install my version bought from PES 11, it says to insert disk 1, but the only installation disc is already inserted
Copy the contents of the drive in a desktop directory. If you have more than one drive, copy the contents of each disc in this same directory.
Start your installation from this directory.
-
I get the error message ' Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the creative cloud '. Then on the new facility to download. the process stops and repeats this message...
Hi Jory,
Run the first CC cleaning tool to remove Adobe Creative cloud completely from your machine.
Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
Once it is completely removed, you can download the installer from the help below document:
https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html
Kind regards
Sheena
-
Compatibility of the OSX installation discs?
I went in the OSX installation process and realized, I had the second installation disk. The version I have only sold in a bundle and is inexpensive, where some other versions are much cheaper and sell with only 2 disc, which is exactly what I need. Compatible discs, and if so which?
My disc 1:
Mac OS 10.4.8 version
Disk, Version 1.0
2Z69-5967-A
Year 2007
You seem to allude to the original installation discs that come with the Mac. The ONLY place you can get those legally is Apple. They work as with the Mac model, they were originally shipped with. They are licensed to be used with the machine they accompany. The license cannot be legally separated from the original machine. The price varies so much is because criminals are free to charge what they want.
Call AppleCare and see if you can buy a replacement for your machine-disc set. The charge is usually minimal.
-
New copy of the table when move to the Subvi?
If you pass an array to a Subvi without treatment on the inside, it will produce a new copy of the array. Thank you.
New copy will not be created if you just pass the array but incase if you use a shift within the Subvi register, then a copy will be available at the node level.
-
My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?
Brand: HP
Type: laptopModel No.: Pavilion zt3000512 MB DDR1 RAMThank you very much!Hi Dominic,
Are you able to get into BIOS to make changes?
If so, you can try to reset the default settings of the BIOS and check.
NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.
-
Original title: cannot start computer
Cannot start computer
This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?
Hi Dan Maarsman,.-Did you change on your computer before this problem?-Do you have any third party registry cleaner program installed on your computer?Start your computer Safe Mode and check if you can successfully start.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
For more information, see:
-
Resettlement without disks
Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, KimHello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim
You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.
Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.
If it was built * friend *, you will communicate with them. Ask your media.
-
"The Setup files are corrupted. You can buy a new copy of the program"Hi, I get this message on my desk. I am running w/7-Ultamate with 8 GB of ram and a 650 GB hd. Any idea on how to fix this? I wake up in the morning and there are at least a dozen of the error messages.
Thanks JimOriginal title: the Setup files are corrupted
Hello
1. What is the full/exact error message?
2. When you receive this error message?Follow the steps.Method 1
Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.Step 1
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2
Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.Perform the virus scan and make sure that your computer is virus-free.
Method 2:
Run Microsoft Online Scanner.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.Also run a scan complete with Microsoft Security Essentials, check out the link.
http://Windows.Microsoft.com/en-us/Windows/products/security-essentialsFor further assistance, post back with display of the event logs. Check out the link.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Response with more information to help you. -
Can not run the Palm installation disc
I want to turn off the Outlook synchronization and understand that I must restart the Palm installation disc to do this. When I insert the installation disc in the drive, Notepad will open with the contents of the index.hta file is displayed. If I use Explorer to navigate to the installation disc and double-click autorun.exe, the same thing happens. If I insert the Palm installation disk on my laptop, it works fine. I give up! Any ideas appreciated. Thank you.
Now, you scared me! I ran a full scan using Norton 360 (updated and current). Fortunately, nothing was found. Even though I know that proves nothing, I feel a little better just fixing the broken association. I read the dougknox link, but I'm not thrilled at the idea of playing with the registry directly, so I found another way. I have Goggled "Microsoft (R) HTML-based Application" and found that the file of the application is called "mshta.exe. Then, I searched for "mshta.exe" Explorer and found that it is in c:\windows\system32. Finally, I used Windows Explorer/Tools/Folder Options/File Types to access mshta.exe and it associates to the HTA file type. It works! Thanks a lot for your help!
Message relates to: Palm TX
-
Move or merge address books TBird from 'death' in the current installation disc?
Old boot disk was not able to start Windows 7 Pro, because 'important startup file' has been corrupted in some way to the previous stop (shutdown appeared 'clean'). Re-installed Windows 7 Pro on a new drive, downloaded and installed Thunderbird, etc. on the new drive and now the disk access 'death' just another 'local' drive on the new facility. The directory of profiles of Thunderbird on the disc 'death' is completely readable, but I can't seem to find "address books" (there are four). Also can't find the magic incantation to launch Thunderbird and pointing to the 'old' profile so I can 'export' address books. Any tips?
TIA, John Chase
Copy the whole profile instead. Instructions in this article: create a new profile and copy the old stuff on top
http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird#Create_a_new_profile_and_copy_the_old_one_over_it
Maybe you are looking for
-
Re: What should I do for Satellite A200 PSAE3 of Vista downgrade to XP
Hello I need do downgrade from Vista to XP Satellite A200 (PSAE3). Is this crazy? And what drivers for the comnents?
-
I can add some old 2 GB of ram to new lenovo.
I have already buy a new computer laptop lenovo G500s "intel core i3, 2, 4 GHz, 4 GB ram, 1 GB of NVIDIA 720 m" my old laptop 'nttcorrino' broke down, so I took her ram and wants to put this new lenovo. "» "And now is the issue, this name of ram" pc2
-
HP envy m6-k010dx upgrade question
Ive met recently pages on AMD XGP and I am very interested in the potential to make my phone able to cope with new games that wouldn't run acceptable fps on my laptop, for those of you who read this and do not know what it is here is the link: http:/
-
Should what aio I expect?
I'm stuck between the choice of the special edition of beats & envy 27 aio computer. I'm looking for a good computer with the best features, I want an optical drive to burn CD DVD &, as well as watch DVDs. I also want to accident coverage. We're goin
-
Noisy fan on a HP Pavillion DV5-1004nr
It's my computer: HP dv5 I only got about 2 weeks ago and the fan was perfectly silent, except when the CPU usage was around 80%. A few days after getting it, I tried to switch to Ubuntu (Linux). The fan has started to get a little stronger and a lot