New disk hard recovery HP 2000 error

Similar Questions

• How to access the disk HARD recovery from command line?

  Hello.

  I have a little trouble with my toshiba Satellite. My system crashed and I forgot to create the system recovery dvd.
  I can't access the "Toshiba HDD Recovery" when I start from another DVD Windows-7, but io accesses the recovery of HARD drive on drive D: with the command line. Is it possible to start the drive HARD recovery manually?

  Kind regards
  Marco

  I know something like this isn't possible.
  If you did not create a recovery disk and you cannot start the HDD recovery procedure, you can order the new Arvato recovery disk

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• Pavilion G6: After the installation of restore on new disks Hard Drive says need to restore system no bootable disc found

  I got a new set of HP recovery disks and keep, error message. So I replaced the hard drive and tried again still error message. Went into BIOS and reloaded by default for Windows 8, fact diag on the memory and the Hard Drive as well.

  Hello

  You don't need to try the method I suggested - just create a bootable disc or flash drive as described, to download and see if you correctly install a recovery partition.

  DP - K

• Disk hard recovery of corrupt or missing...?

  Hello

  I gave my Acer Netbook to my son this weekend while he could reinstall everything again because I had some problems and he was running like a snail. However, he rang me yesterday and said that it is either without recovery or it was deleted or its corrupted.

  That's what he says he did. It's above my head and I do not understand, but he said that might be the community. That's what he said below.

  ==================================================================================================

  MS-DOS

  DISKPART

  List of Volume

  Looking in DiskPart there should be at least 4 partitions and there is only 3 so the recovery partition is missing. How it happened I don't know because my knowledge of fathers of computers isn't that wonderful. To him remove a hidden partition that cannot be removed via DiskPart because it is a hidden partition is a complete mystery.

  Volume 0 - C - NTFS - BOOT

  Volume 1 - RECOVERY NTFS - HIDDEN (Missing)

  Volume 2 - FAT32 - SYSTEM

  Volume 3 - RECOVERY SYSTEM - SYSTEM

  Is there a recovery media that I can buy and reinstalled the operating system. Other than what I could do is own execution in DiskPart and clear as the HARD drive and I have a license Windows 7 Ultimate 86 and 64-bit. I could create a bootable USB drive and perform a clean installation. But I would need to download all the drivers for the netbook.

  * The Recovery partition is absent there is so no viable way to recover the Netbook back to settings factory because it no longer exists. Therefor, the only way of recovering or reinstalling the operating system is to me to either get in on recovery media or I reinstall a new installation of Windows 7 or Windows 8.1 which I fired disk so I can install it. But I need all the drivers beforehand, otherwise I would not be able to restore the Netbook to a State of normality.

  ==================================================================================================

  Acer recovery media
  If you are in the United States, you can buy it:
  http://store.Acer.com/store/aceramer/en_US/eRecovery

  If you are outside the United States, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

  or to download the drivers if you opt for a clean install:

  http://us.Acer.com/AC/en/us/content/support

• Failure hard drive replaced by larger windows disk hard recovery 7 starter will not work

  The Emachines Nav51 of Netbook had a hard drive fail completely. WD 160 GB instead of replacing the drive with the same size of the extra couple of dollars so I installed a 320 GB WD drive. Had a set of recovery disks shipped from Emachines, but due to the size of the disc it does not recognize the correct system.
  But then installed on setup Windows installs the services that it stops and an error box goes up requiring you to restart the installation from scratch. But then runs into an endless loop does the same thing over and over again.
  How to get windows 7 edition starter on this system.

  Hi Dave,.

  Thanks for the updates.

  I wish to inform you that there is a difference between the installation disc and disc upgrade.

  However, there is a solution that will allow you to install Windows 7 on the computer.

  Step 1: during the installation, when you get to the window where you enter the product key, uncheck the option that requires the product at the bottom of the window key. You can use the same disc of Windows 7 Home Premium upgrade.

  This will install Windows 7 without product key, you must activate it later.

  Step 2: Activate the phone.

  Check out the following link and follow the instructions in the section: Activate by using the telephone.

  Activate Windows 7 on this computer
  http://Windows.Microsoft.com/en-in/Windows7/activate-Windows-7-on-this-computer

  Please let us know the status of the issue.

• Problem creating the disk hard recovery Satellite A200 + touch pad

  So I lent my laptop to my daughter until she could get enough to buy a PC.
  Well, I got it back that only she has installed a bunch of stuff to the point where it is blowing on vista even after than my attempts to clean I decided to start the laptop using the creation of recovery disk came with the laptop.

  But now, I used about 8 dvd discs, trying to create a good drive but I restart fr. with the disc in... nothing happens. I'm trying to spend directly in vista... and he says can not read the disc. I've recreated the disc several times and the same result and well, it was the only type of restore disc that came with the laptop]

  Also as I've gotten at the time when I use the touchpad my cursor is jumping around, is that fixable?

  Thanks in advance.

  Hello

  Sorry, but something must be wrong in your post. As far as I know Satellite A200 comes with original Toshiba Recovery DVD. You should not create anything. New laptops like A300 do NOT come with DVD recovery and each laptop user, it should only create, but not with Toshiba Disc Creator. For this Toshiba application offers another tool. The name is Toshiba Recovery Disc Creator. It is not the same tool. So you have probably original Toshiba drive.

  So if you have it please use this recovery DVD as described in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37706

• Image of disk HARD recovery removed the Satellite A300 - restore HARD drive

  Hello
  I have a Satellite A300, and I deleted by mistake HDD Recovery folder.

  I have recovery disks, but I want the HDD Recovery folder to restore my system without using the discs.

  Please, can you tell me how to recreate the HDD Recovery folder?

  Thank you very much

  Hello

  Unfortunately, now is not impossible to recover, image of hard drive, but with the only recovery disk. You can copy only to someone who has the same laptop with hard drive recovery record.

  Post edited by: Jeka-HE

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.

• New disk hard internet rcognizing not

  I have a B110 Dell Demension that I swapped to hard disk with new and recharged with initial start-up diskettes. Now, it will not be recognized my broadband internet connection. I went to tools and internet to internet set-up options, but it still will not recognize

  Hi James,

  After a reset to factory on a Dell PC, Dell recommends that, reinstalling device drivers are carried out in a particular order. Please refer to the link below, to find out how to reinstall the drivers for your

  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&CS=19&docid=1A0C0937D62A8739E0401E0A55174744&doclang=en&l=en&s=DHS

  Good luck.

• HP G6: Windows 8.1 to new disk image recovery

  I bought a new drive bigger and harder for my G6. I made an image of my old drive windows and I have a 8.1 windows installation disc.  I think that it is equal to a repair disc. It is in any other operating system. If I set the bios to the legacy that I can boot the disk windows 8.1 but it will not restore the image because it was made in efi mode and active legacy it says it's bios mode. The computer does not start the disk windows 8.1 in efi mode. I tested the drive in another computer and it starts. The computer will boot to a windows 7 or windows 10 drive but not the disk of 8.1. How can I do to restore that image I did?

  Rethinking the computer was in legacy mode when I made the image. I feel pretty screwed by this experience of windows 8 CV.  I had planned to upgrade to windows 10 after that some of the bugs have been developed. Now, it's out of the question.

  OK, I'll try that. I won't recommend the purchase of new laptops to anyone yet. Get a Thinkpad T series used with Windows 7. I know that you could still buy them last year. They last forever.

• After installing the new disk hard Windows XP tells me that I have to reactivate.

  original title: problem after the activation of the product
  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  Start in safe mode, install SP2, SP3 install.

  Reboot in normal mode, it should work. I think that it maybe an old cd rather than the last version supplied with certificate of authenticity.

  Cheers (mine works now)

  TDI

• Vista activated on the old hard drive hard disk failed to load to the new disk hard wont let me enable

  Vista activated on the old hard drive, failed loaded hard drive vista Ultimate edition on the new hard drive, but do not let me activate. This is a saved copy and use the product from the back of the disc that contains key

  Hi Tony,.

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps in the link activate Windows Vista by phone activation.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

• Installation of Vista on the new disk HARD of DVDs of resettlement

  Hello!

  Is it possible to use the reinstallation of Windows came with my Dell laptop DVD to install Windows on a new HARD drive for the same computer laptop?  I didn't upgrade the HARD drive of my laptop for something newer, bigger and faster, but I want to assure you that I will be able to use the reinstall DVD before investing in the new HARD drive.  I have not been able to develop a response straight yes or no from the comments I've seen online (something on the DVD works only with the original Dell hardware?).

  Here's my laptop specs:

  -Model: Dell XPS m1330

  -Age: 4.5 years

  -OS: Windows Vista Home Premium 32 bit (I have reinstallation DVD provided with the laptop - one marked "already installed on your computer" - as well as the Dell drivers and utilities CD)

  -Material: All material is as I received Dell - I did Exchange something out.

  Thanks in advance for your understanding!

  Mariko

  Resettlement is precisely what this DVD is for.  Dell offers a page of links to help owners restore their computers here: restore and reinstall Windows on a Dell computer.  For a blank hard drive, you must go to step 4: manual reinstallation.  Forum member Natakuc4 has written some pages with lots of additional information that might be useful, found here: install clean windows.

  It is also possible to clone your existing HDD to shorten the time required to restore your computer, but with a laptop, need you also a shell of USB external hard drive.  I can't speak for all providers, but I know that Seagate and Western Digital offer a free version of Acronis True Image on their web pages to the owners of their hard drives.  This application allows you to transfer an image of your existing hard drive to a new hard drive in less than an hour (usually - depends on how much is on the discs).

• New disks hard Hitachi does not fit on 8600

  I got Hitachi 7200 RPM 60 GB hard drive installed on my Inspiron 8600 who died. I bought a new HDD Hitach 7200 RPM 200 GB but its interface is different, the pins would not fit! Am I missing something? This hard drive is not going with my Inspiron? I thought that all hard drives have the same interface, I'm confused.

  There is a removable adapter at the end of the old drive (with a lot of legs/ankles) even it would not go with the new hard drive!

  The old interface looks like:

  I I I I I I I I I I I I (each a PIN)

  The new hard drive has this type of interface:

  ---(une représentation brute, ses deux segments et n'a pas de broches)

  Please help what I do