New facility will not load the existing catalogs

Similar Questions

• Opening links in a new tab will also load the link on the problem of temporamental currnt tab that comes and goes. Sometimes using links from google as well.

  Opening links in a new tab will also load the link on the problem of temporamental currnt tab that comes and goes. Sometimes using links from google as well. Never had this problem before. Also the SafeSearch feature on google has itself locked on strict, not too much problem, but has happened at the same time my links and tabs not working like I want.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Inspiron 1525 / Windows Vista replaced but disc will not load the drivers

  Inspiron 1525 (6/2008) hard drive failed.    Bought a Western Digital spare hard drive 500G (WD Blue) SATA III 5400 RPM.   (NOTE: this is the 2nd replacement hard drive because I bought the 1525... the first time I replaced the hard drive, everything worked as it should.) Original hard drive was a Seagate).

  Replacement hard drive installation is installed it will not load the Vista OS from the disk to the operating system (which came with the laptop) because it does not recognize the driver for the hard disk.

  I tried downloading the latest drivers from the Dell site, but which did not work or the other.

  As I said, the previous hard drive replacement (an another western digital) works perfectly when I reinstalled the Vista operating system in 2010.

  Any ideas?

  Thank you...

  Thanks for the detailed instructions.   I tried everything, but it didn't work.

  Then I read about someone trying to install the same on an Inspiron 1545 hard drive and need to adjust the drive to align with the connectors using paper and another person was using the foil which made me realize that it was a problem of 'size' or 'worthy '. I then decided to open the laptop and manually set the new drive in place and everything works now. (Dell 1525 has a side load drive holder therefore had to open to make this setting correctly).  The player on the 1525 is 9.5 mm thick, but the new disc is 7 mm... even though the sales page for this player said he would fit a 9.5 mm slot.

  Everything is good now.

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• satellite 4080XCDT will not load the OS W2k

  Hello

  I have a problem with a laptop.
  It runs windows 2000 and will not load the operating system.

  I think someone changed the boot.ini on the pc,
  Now, when it is turned on, it displays the operating system of windows 2000, as well as the other one under it called operating system windows 2000 photo.
  I think someone tried to change the boot image but erred in the boot.ini file and now it won't start him.

  So I think that the boot.ini file is now incorrect and not finding the operating system.
  Is it possible to change this and get the operating system to load?

  If you are sure that only the boot.ini file has been changed then, you can see this Microsoft Web site, and the article on the boot.ini file in Windows 2000.

  Here you can find details how works a boot.ini file and what to change.

  * How to edit the Boot.ini file in Windows 2000 *.
  http://support.Microsoft.com/kb/311578/en-us/

  Good bye

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• my new laptop will not load or run AOL, the laptop is runing windows 7

  I tried to install AOL on my new laptop computer but it does not load or open when he finished istalling, the laptop is windows 7, can help explain why it is happeniong please

  I tried to install AOL on my new laptop computer but it does not load or open when he finished istalling, the laptop is windows 7, can help explain why it is happeniong please

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  They are specialists in IE it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Brand new Veer does not update the app Catalog or something else

  Hello

  Got a new at & t Veer (it was already unlocked), after have logged you in my existing profile, the phone came, but the App Catalog, has not been able to update itself as well as other applications.  Some of the suggestions in the forum to change the date to July 1 and force the update via the App Catalog, but it did not.  Clear and reset the phone, still didn't work.

  WEBosdoctor'ed the phone and it still has not installed the update (failed).

  Call in the experts to see if there are any other technique not too complicated to solve the problem.  WebOS is 2.1.2.

  I have seen one that required some hacking of level intermediate directories for reset the certificate, but a bit too risky for my basic skill level.

  Thank you!

  After scouring the forums looking for similar problems, I put on one track
  what I was living for:
  - http://forums.webosnation.com/hp-touchpad/325422-app-catalog-certificate-update-failed-2.html
  
  Thanks to the efforts of SideshowBob84, we have a solution to this problem.
  
  Despite the solution published HP to change the system date to 1 July 2013 and
  Download the update from the App catalog and install it, it still doesn't work.  It may have previously
  worked, as others have pointed out, however, since September, it appears something has
  changed and this solution is no longer valid.  Perhaps the server certificate has been
  compromised regarding WebOS and not corrected since.  HP may not be up-to-date
  of the problem.
  
  However clever mind in the WebOS community have a solution.
  
  When an update or installation of the App Catalog is requested, that a ".ipk" is downloaded.
  and then installed on your device, then the international prototype of the kilogram is deleted in your download folder.
  Very clean and hygienic when it works correctly.  When it's not as here all the
  evidence is erased, and we do not know what happened.
  
  GMMan, created a process and a patch that comes in the installation process and
  keeps ipk so that it can be installed by PreWare.  In this case, we want to download the
  Update Catalog App, but when he moved, we use PreWare to the action.  Times
  the update has been installed, you should be able to use the App Catalog without
  incident.  The following link leads to the solution of GMMan:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  Its a bit technical and a white knuckler couldn't for some.
  
  I'm not a neophyte, but I don't know where near technical competence are the guru.
  But I'll try and simplify the process in an easy to understand the document.  Before entering
  started, here is an inventory of the software solutions you need:
  
  Also when you download these solutions, remember to give what you can!
  These people put out there for the benefit of all.
  
  WebOSDoctor - this tool will reset your Veer to the conditions of the factory, he must get
  messed up.  An indispensable tool for any owner of WebOS.
  - http://www.webos-internals.org/wiki/WebOS_Doctor_Versions
  
  WebOSQuickInstall (WOSQI) - Gift of Jason Robitaille to the WebOS community for
  install PreWare, Homebrew applications and patches on WebOS devices.
  Absolutely essential and easy to use.
  - http://forums.webosnation.com/canuck-coding/274461-webos-quick-install-v4-5-0-a.html
  
  PreWare and Internalz Pro - Tools used for research of the ipk and patches loaded on
  a device.  PreWare will apply the patches on your device.  No need to download
  as WOSQI can find these ipk for you and install them.
  
  NODELETEIPK. PATCH - this patch when applied to your device will be downloaded
  the IPK is not deleted if they are properly installed.  Note: when this
  patch is applied all downloaded ipk is kept, you should not use Internalz Pro
  delete installed and no more need ipk.  A small price to pay to get your App
  Catalogue working again.
  A link to download NODELETEIPK. PATCH is found in this thread:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  
  Java 1.6 - minimum for WOSQI to work.
  In your search engine, search for 'Java 1.6' or 'Java 1.6 jre"to download Java
  the Oracle company.
  
  Your PC or laptop - WOSQI works on Windows, Linux and Mac.  I personally found
  that it does not work on PowerPC Mac, it's that you can't get Java 1.6 for these computers.
  And on PC Windows 8.1, I don't think that pilots Novacomd works on this version.
  
  -----------------------
  
  Now, the real work begins.
  
  1. install Java on your workstation.
  
  2. If your Veer is messed up, restore it back to factory using WebOSDoctor condition.  Good
  on screen instructions.
  
  3. launch your device and complete the activation and the Palm profile process.
  The AppCatalog update will fail, but it's OK, we'll fix it later.
  Once your device is running, put in Developer Mode.  To make this entry
  the Konami code on the home screen.
  Type the code as shown: "upupdowndownleftrightleftrightbastart". It's a bit geeky,
  but it works.
  Alternatively, you can type in, "webos20090606".
  You'll be put in the screen in developer mode, slide the switch to on to activate
  Developer mode.
  You can disable it later once you have applied the update to the App catalog,
  using the same codes.
  
  4. start WebOSQuickInstall (webosquickinstall.jar).
  
  5. attach your device to your workstation.  Once the workstation is aware of your
  device WOSQI will also recognize your device. You should see the name of
  your device in a drop-down list in the WOSQI.  Your device will also ask you
  If you want to connect with a USB device or charge your device.
  Select, load your device.
  
  6. There will be an icon on the right side of the WOSQI window that looks to the world
  attached to a hose.  Click on this icon and it will open a new window with
  several tabs.  Click the Applications tab if it is not already active.
  Search for Preware and Internalz Pro.  Install these two ipks.
  When these ipks are being installed, it might want to install other required
  packages.  Allow installation of other packages.  Once completed,
  Close the window and you will be current with the main window.
  
  7. now, look for an icon to sign more.  Click on it and it will open a finder window.
  Locate the NODELETEIPK. PATCH file that you downloaded previously.
  Let WOSQI install and apply the patch.  After that WOSQI applied the patch,
  the sheer can restarted.  YMMV.
  Then, for the update, set the date of your system on July 1, 2013
  via the application Date and hour.
  
  8. you are now finished with the steps in the workstation.  Remember to well to eject the
  device before you disconnect it from the computer.
  
  9. When you look at the menu of your device, you should see PreWare and Internalz Pro.
  
  10. then open the App Catalog.  Search for 'App Catalog Update.  Install the
  Update. It will probably fail, and it's OK.
  
  11. open Internalz Pro and navigate to the following folder location,.
  / Media/Internal/downloads.  You will probably see a called ipk,
  com Palm.app.appcatalogupdate_2.0.0.IPK.  Open the ipk.
  When you open this ipk, it automatically calls Preware
  to install the ipk.  When this is done, the App Catalog should be
  fully functional.  A restart of the swing may be required.
  
  12. reset the date system is automatic.  You should now be able to download
  the App Catalog programs.
  
  13. Notes, with the patch in place, you need to occasionally clean the download
  folder for managing storage.
  
  14. you're now back to a functional State of WebOS!
  
  15. you can uninstall the NODELETEIPK. Your device to help PATCH
  WOSQI, using tool/Device Management.  I had not done that, so if you are
  success, let us know!

• From 50.0, Firefox will not load the tabs. How can I treat?

  Recently (very probably coinciding with the 50.0 update), Firefox suddenly stopped loading tabs. All the pages get stuck on 'connection '.... "as well as system as topic tabs: support and about: config. Google.com and other Web sites and locations internal intranet do not load.

  The first tab that opens at the start of Firefox will sit on a white page indefinitely, not to load the page speed dial 'shortcut '. Not even the tabs system such as topic: support load. If a second tab is open, and the first tab is closed, then the tabs system become available, but websites will always be blocked to 'connection '.... »

  This troubling behavior began to appear in dozens of jobs in our Organization. On each of them, except one (so far), we were able to resolve by obtaining: support to load using the method described above and refreshing of Firefox, which leads me to believe there is some sort of problem with the profile.

  On a desktop, Firefox seems to work after a refresh, but after an instance of Firefox is closed and a new opening, the new question asserts itself. When you open Firefox under a new user profile, it works once before breaking. On this particular station, I tried uninstall Firefox and reinsert several times without success, as well as facility nightly, which presents the same exact issues as the regular version. I'm stumped on how to solve this problem for the end user. I even tried to run CCleaner.

  Any ideas?

  Hi HaggenIT, can you please try the following and see if it works: enter Subject: config in the address bar of firefox (confirmed the message information where it appears) & search for the preference named browser.tabs.remote.autostart.2. Double-click it and change its value to false.

• New CD will not load

  Try to load CD program (Turbo Tax), but before the new CD in the CD compartment, nothing happens. The led lights up but will not recognize.

  http://support.Microsoft.com/default.aspx/KB/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  If the above does not resolve the issue, please repost in the Vista Hardware Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P500-12F will not load the drivers of track pad!

  Hi, I just got a DVD driver for this lappy and is a self intall of all drivers that are missing or that need to update, when ran I was told of the Skate track had disappeared, and started to load, but it will not I tried a load of strength in vain Hat too, the track pad did not work since getting this second hand could the block be disconnected from the motherboard?
  This would make the driver not loading please?

  Any help would be really appreciated.
  Thank you, Wayne...

  Hello Wayne

  In front of me, I have Satellite P500 and I use it almost 10 months now without a single update. What I'm updating are important updates from Microsoft. More than that and so far I didn't notice a single hardware or software problem.
  After reading your ad m a little confused.

  As far as I know Toshiba doesn't offer any DVD for that laptop, not any kind of pilot DVD so please be so kind and tell me which DVD driver is and who has created and offered this DVD.

  original is Win7 64 bit OS (original image of recovery Toshiba) preinstalled on this P500?

• HP Pavilion 550-055na: new disk will not install the new operating system

  Hello

  I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.

  My problem is that the new copy of Windows 7 will not install on my new hard drive.  I get:

  Violation of secure boot

  Invalid signature detected. See the policy in the configuration of secure boot

  Then me to a black screen after I pressed Enter/Ok, who said the following.

  Check the presence of the media...

  Media present...

  On IPv4 PXE boot.

  If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:

  Realtek PCIe GBE Family Controller IPv4
  

  Realtek PCIe GBE Family Controller IPv6

  and the output by using the arrow keys

  How to change the secure boot strategy?  If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?

  Any help would be appreciated to greately.

  Sincere greetings

  DJ

  Hello:

  You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.

  Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.

  http://support.HP.com/us-en/document/c03653200/

• Can't uninstall the old version and install the latest version. Will not uninstall the existing version.

  I tried to uninstall the old version of Firefox, so I can install a newer version. I go to install/uninstall and that you try to uninstall the old version and it says that I need to reboot the system, but it does not end the uninstall when I restart the system

  Upgrading to a new version of Firefox, you don't need to uninstall the previous version. Update Firefox to the latest version of playback

• After that 8.01 updated the former saved passwords autocomplete but new sites will not display the ' remember me ' box. If the site has own box "remember me", it works. All my tools settings please remember passwords. How to make back box "remember me"

  For sites with a previous version, I deleted all cookies, bookmarks, and the old passwords and restarted. No luck.

  Some sites such as Windows Live (Hotmail) use JavaScript to create the input form and the Firefox password manager does not work in cases like this. You can use the extension to save the name and the password in such a case, you will not forget them, but Firefox doesn't fill them even if it was recorded.

• Write that VI PNG file will not replace the existing file

  Hi all

  I use VI file PNG write to store the graph in a png file. I am able to save the file with a specific file name, which includes the date, model number, serial number etc.. Once the chart is saved as a png file, if I make changes in the graph (as autoscale, turn captions etc.) and try again to save the file with the same file name, write PNG leader VI does not save the changes I made on the chart. I'm looking at the timestamp on the windows Explorer, but it is not updated. I opened the VI itself (which is write protected) to see if it generates an error if I provided the same file name, but it does not generate an error.

  I don't know if I am missing anything.

  Can you people please help me find a way to replace the existing PNG file?

  I'm using LabVIEW 2013 on Win 7 machine.

  p.s. I use the second method mentioned in this article:

  http://digital.NI.com/public.nsf/allkb/5AE4ADCBB65A6D8F86256FBF007A1AC1

  (Programmatically with the Get Image method).

  Thanks for your help

  OPR

  OPR wrote:
  ... Write VI PNG file does not save the changes I made on the chart. I'm looking at the timestamp on the windows Explorer, but it is not updated.

  You are also looking at the image itself? Explorer Windows cannot update the timestamp in the display immediately, or you might be looking at creation time, which doesn't seem to change when you replace a file.

  I can say that I saw a similar question very recently (he was also PNG, even if it's not really relevant), and here it certainly crushes - http://forums.ni.com/t5/LabVIEW/LAVA-snippet-overwrite-keeps-old-date-time-of-png-file/m-p/3257059#M...