Satellite P500-12F will not load the drivers of track pad!

Similar Questions

• Inspiron 1525 / Windows Vista replaced but disc will not load the drivers

  Inspiron 1525 (6/2008) hard drive failed.    Bought a Western Digital spare hard drive 500G (WD Blue) SATA III 5400 RPM.   (NOTE: this is the 2nd replacement hard drive because I bought the 1525... the first time I replaced the hard drive, everything worked as it should.) Original hard drive was a Seagate).

  Replacement hard drive installation is installed it will not load the Vista OS from the disk to the operating system (which came with the laptop) because it does not recognize the driver for the hard disk.

  I tried downloading the latest drivers from the Dell site, but which did not work or the other.

  As I said, the previous hard drive replacement (an another western digital) works perfectly when I reinstalled the Vista operating system in 2010.

  Any ideas?

  Thank you...

  Thanks for the detailed instructions.   I tried everything, but it didn't work.

  Then I read about someone trying to install the same on an Inspiron 1545 hard drive and need to adjust the drive to align with the connectors using paper and another person was using the foil which made me realize that it was a problem of 'size' or 'worthy '. I then decided to open the laptop and manually set the new drive in place and everything works now. (Dell 1525 has a side load drive holder therefore had to open to make this setting correctly).  The player on the 1525 is 9.5 mm thick, but the new disc is 7 mm... even though the sales page for this player said he would fit a 9.5 mm slot.

  Everything is good now.

• Satellite P500 (PSPE8U) - can not find the drivers for it

  Hello

  I've been and down these forums without success. I watched a lot of forums for the drivers for my P500. I've been through the pages of support sites toshiba of Europe, Uk, Australia and Japan... no chance either. I tried to contact the ebay seller I bought, apparently it is now out of business. It goes without saying that the laptop came without any driver disk. Unfortunately, one of the drives died on me and had no time to do a recovery with all the drivers disk. So now I'm really stuck. Here are the details of the laptop should anyone have brain waves for me-

  P500 - PSPE8U
  Windows Vista 64-bit
  ATI HD 4650

  At the time the largest bad head are the video drivers and my battery life is around 30 mins without the toshiba software. The stock of the resolution is a disaster without the correct driver. I tried the ATI46 drivers * from their site, but the application tells me that my hardware is not supported.

  Any help would be appreciated.

  Thank you
  Chris

  Hi Chris,

  Satellite P500 with model PSPE8U number belongs to the US models and therefore all the drivers and tools that you can find on the Toshiba U.S. page:
  http://www.CSD.Toshiba.com

  Just check the underside of your laptop again for the exact model as P500-S1234 number, then you can find the right drivers for your model. :)

• Satellite P500-12F - Question about installing the drivers

  Have recently bought a new P500 Satellite 12F and I am very happy with it. This PC came only came on the market on 29 Oct. I decided this pilot site updates, bios, etc. and was surprised to find a few tens of individuals in the list.

  When I rang Toshiba support he told me don't bother to install as there may be a danger and if if its ok market don't bother!

  I would like a second opinion please.

  Satellite P500 is newer model comes with the latest drivers, tools and utilities for Toshiba laptop.
  It turns out that the Toshiba doesn't offer updates every month and, in my opinion, you don't need any update to date.

  I guess that your series of satellites well and without some serious software problems. So, touch of an operating system and be happy with your new toy.

• satellite 4080XCDT will not load the OS W2k

  Hello

  I have a problem with a laptop.
  It runs windows 2000 and will not load the operating system.

  I think someone changed the boot.ini on the pc,
  Now, when it is turned on, it displays the operating system of windows 2000, as well as the other one under it called operating system windows 2000 photo.
  I think someone tried to change the boot image but erred in the boot.ini file and now it won't start him.

  So I think that the boot.ini file is now incorrect and not finding the operating system.
  Is it possible to change this and get the operating system to load?

  If you are sure that only the boot.ini file has been changed then, you can see this Microsoft Web site, and the article on the boot.ini file in Windows 2000.

  Here you can find details how works a boot.ini file and what to change.

  * How to edit the Boot.ini file in Windows 2000 *.
  http://support.Microsoft.com/kb/311578/en-us/

  Good bye

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7, freshly installed, can not load the drivers, no usb, no cd player, no internet

  Hey guys,.

  I just installed Windows 7 64 bit on Windows 7 - laptop OS, but did not not any possibility of installing drivers. USB 2.0 does not respond, ethernet cable - no drivers. How can I possibly have to load drivers for the laptop computer?

  I'll try to find a solution, but nothing, only the similar problem was to change in the BIOS USB 3.0 2.0, but I have no idea how do in Insydeh20 bios.

  Hello

  If I understand you correctly, you have installed Windows 7 on your computer, but can not load the drivers that you don't have drivers CD. In addition to this, you can not connect to the internet through an Ethernet cable. In this scenario, we can only do two things to solve the problem.

  1. try to contact your computer manufacturer and ask the driver CD after mentioning your model number. You can also visit one of the shop of the manufacturer of your computer and ask the drivers CD and see if they can help.

  2. you can download the .exe file from the site of the constructor on any of the advertising of work computer and then install it on your computer using CD/DVD/USB.

  Hope I could answer your query. Feel free to post on the forum, if you have concerns more associated with Windows. We will be happy to help you.

  Kind regards

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Satellite Pro A10: Error when loading the drivers and other things

  Hello.
  I just bought a spare A10 to ebay. I already have an A10 and the company. Powering up the new A10, I have a bubble message from microsoft saying that it was unable to load the drivers for the cd burning software, please update the drivers. If I click on the bubble it says to update of real player, roxio or other recording software.

  As I did not immediately and there not there when bought. Its not broken, its all just annoying. Also when I right click anywhere on the desktop, in the coloum that you see, I get a link to an adult site, how can I get rid of this?

  I want to thank you for taking the time to read this and would be grateful if you could help.

  Jack.

  Hi Jack,

  I suggest you to check what is actually underway when you start your new A10 using MSCONFIG. This will then stop these tasks that you do not want to be started up and should prevent your error message displayed.

  I also suggest you download and install a copy of AdAware http://www.lavasoft.com (and perhaps also http://www.spybot.info/en/download/index.html SpyBot) and do a check complete of your new A10 to remove any nasties that may be hiding there.

  It seems that if the previous owner has removed some of the software they had installed, but is not completely cleaned afterwards.

  Finally, I personally use a freeware CCleaner http://www.ccleaner.com/ for utility call which is excellent to remove the pieces left over on my laptop. It must be treated with some caution, because it is a powerful utility, but it is very quick and thorough.

  Kind regards

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite Pro A40: Could not download the drivers on the support site

  I could not download the drivers from the site
  HELP PLEASE!
  http://support.toshiba-tro.de/Tedd-files2/0/BIOS-20070808115908.zip

  Strange! This link works for me. Please check again.

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Satellite P500-1DX will not accept password

  Satellite P500-1DX - Windows 7.
  Not connected this morning no problem, return to work will not accept password.
  Had not implemented the password reset disk, but have one created from my old laptop which is vista OS.

  However, when I enter the P500 it runs the wizard and an error occurs.
  The laptop has perfectly to update Norton 360 on it is probably not a virus.

  All ideas

  Hello

  What password do you mean exactly?
  BIOS or Windows user password?

  If you're talking about BIOS password then I have some bad news for you; You cannot reset a unknown BIOS password. Only a Toshiba ASP technician may remove unknown BIOS password.
  But if you talk to windows user password, then you could reset/clear the password by the new installation of the operating system for this you can use a HARD drive recovery option.

  PS: I found this article on resetting a password account user in Vista or Windows 7. I did not try it, but some people on the net reported that the account password could be changed successfully
  http://www.Vistax64.com/tutorials/102005-reset-user-account-password.html