new height is not updated...

Similar Questions

• Brand new Veer does not update the app Catalog or something else

  Hello

  Got a new at & t Veer (it was already unlocked), after have logged you in my existing profile, the phone came, but the App Catalog, has not been able to update itself as well as other applications.  Some of the suggestions in the forum to change the date to July 1 and force the update via the App Catalog, but it did not.  Clear and reset the phone, still didn't work.

  WEBosdoctor'ed the phone and it still has not installed the update (failed).

  Call in the experts to see if there are any other technique not too complicated to solve the problem.  WebOS is 2.1.2.

  I have seen one that required some hacking of level intermediate directories for reset the certificate, but a bit too risky for my basic skill level.

  Thank you!

  After scouring the forums looking for similar problems, I put on one track
  what I was living for:
  - http://forums.webosnation.com/hp-touchpad/325422-app-catalog-certificate-update-failed-2.html
  
  Thanks to the efforts of SideshowBob84, we have a solution to this problem.
  
  Despite the solution published HP to change the system date to 1 July 2013 and
  Download the update from the App catalog and install it, it still doesn't work.  It may have previously
  worked, as others have pointed out, however, since September, it appears something has
  changed and this solution is no longer valid.  Perhaps the server certificate has been
  compromised regarding WebOS and not corrected since.  HP may not be up-to-date
  of the problem.
  
  However clever mind in the WebOS community have a solution.
  
  When an update or installation of the App Catalog is requested, that a ".ipk" is downloaded.
  and then installed on your device, then the international prototype of the kilogram is deleted in your download folder.
  Very clean and hygienic when it works correctly.  When it's not as here all the
  evidence is erased, and we do not know what happened.
  
  GMMan, created a process and a patch that comes in the installation process and
  keeps ipk so that it can be installed by PreWare.  In this case, we want to download the
  Update Catalog App, but when he moved, we use PreWare to the action.  Times
  the update has been installed, you should be able to use the App Catalog without
  incident.  The following link leads to the solution of GMMan:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  Its a bit technical and a white knuckler couldn't for some.
  
  I'm not a neophyte, but I don't know where near technical competence are the guru.
  But I'll try and simplify the process in an easy to understand the document.  Before entering
  started, here is an inventory of the software solutions you need:
  
  Also when you download these solutions, remember to give what you can!
  These people put out there for the benefit of all.
  
  WebOSDoctor - this tool will reset your Veer to the conditions of the factory, he must get
  messed up.  An indispensable tool for any owner of WebOS.
  - http://www.webos-internals.org/wiki/WebOS_Doctor_Versions
  
  WebOSQuickInstall (WOSQI) - Gift of Jason Robitaille to the WebOS community for
  install PreWare, Homebrew applications and patches on WebOS devices.
  Absolutely essential and easy to use.
  - http://forums.webosnation.com/canuck-coding/274461-webos-quick-install-v4-5-0-a.html
  
  PreWare and Internalz Pro - Tools used for research of the ipk and patches loaded on
  a device.  PreWare will apply the patches on your device.  No need to download
  as WOSQI can find these ipk for you and install them.
  
  NODELETEIPK. PATCH - this patch when applied to your device will be downloaded
  the IPK is not deleted if they are properly installed.  Note: when this
  patch is applied all downloaded ipk is kept, you should not use Internalz Pro
  delete installed and no more need ipk.  A small price to pay to get your App
  Catalogue working again.
  A link to download NODELETEIPK. PATCH is found in this thread:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  
  Java 1.6 - minimum for WOSQI to work.
  In your search engine, search for 'Java 1.6' or 'Java 1.6 jre"to download Java
  the Oracle company.
  
  Your PC or laptop - WOSQI works on Windows, Linux and Mac.  I personally found
  that it does not work on PowerPC Mac, it's that you can't get Java 1.6 for these computers.
  And on PC Windows 8.1, I don't think that pilots Novacomd works on this version.
  
  -----------------------
  
  Now, the real work begins.
  
  1. install Java on your workstation.
  
  2. If your Veer is messed up, restore it back to factory using WebOSDoctor condition.  Good
  on screen instructions.
  
  3. launch your device and complete the activation and the Palm profile process.
  The AppCatalog update will fail, but it's OK, we'll fix it later.
  Once your device is running, put in Developer Mode.  To make this entry
  the Konami code on the home screen.
  Type the code as shown: "upupdowndownleftrightleftrightbastart". It's a bit geeky,
  but it works.
  Alternatively, you can type in, "webos20090606".
  You'll be put in the screen in developer mode, slide the switch to on to activate
  Developer mode.
  You can disable it later once you have applied the update to the App catalog,
  using the same codes.
  
  4. start WebOSQuickInstall (webosquickinstall.jar).
  
  5. attach your device to your workstation.  Once the workstation is aware of your
  device WOSQI will also recognize your device. You should see the name of
  your device in a drop-down list in the WOSQI.  Your device will also ask you
  If you want to connect with a USB device or charge your device.
  Select, load your device.
  
  6. There will be an icon on the right side of the WOSQI window that looks to the world
  attached to a hose.  Click on this icon and it will open a new window with
  several tabs.  Click the Applications tab if it is not already active.
  Search for Preware and Internalz Pro.  Install these two ipks.
  When these ipks are being installed, it might want to install other required
  packages.  Allow installation of other packages.  Once completed,
  Close the window and you will be current with the main window.
  
  7. now, look for an icon to sign more.  Click on it and it will open a finder window.
  Locate the NODELETEIPK. PATCH file that you downloaded previously.
  Let WOSQI install and apply the patch.  After that WOSQI applied the patch,
  the sheer can restarted.  YMMV.
  Then, for the update, set the date of your system on July 1, 2013
  via the application Date and hour.
  
  8. you are now finished with the steps in the workstation.  Remember to well to eject the
  device before you disconnect it from the computer.
  
  9. When you look at the menu of your device, you should see PreWare and Internalz Pro.
  
  10. then open the App Catalog.  Search for 'App Catalog Update.  Install the
  Update. It will probably fail, and it's OK.
  
  11. open Internalz Pro and navigate to the following folder location,.
  / Media/Internal/downloads.  You will probably see a called ipk,
  com Palm.app.appcatalogupdate_2.0.0.IPK.  Open the ipk.
  When you open this ipk, it automatically calls Preware
  to install the ipk.  When this is done, the App Catalog should be
  fully functional.  A restart of the swing may be required.
  
  12. reset the date system is automatic.  You should now be able to download
  the App Catalog programs.
  
  13. Notes, with the patch in place, you need to occasionally clean the download
  folder for managing storage.
  
  14. you're now back to a functional State of WebOS!
  
  15. you can uninstall the NODELETEIPK. Your device to help PATCH
  WOSQI, using tool/Device Management.  I had not done that, so if you are
  success, let us know!

• 33.1.1 (or earlier version) Firefox makes the larger fonts on the site BBC.co.uk/news and is not update local weather by day - both work OK with Chrome

  No other site does seem to be affected by this anomaly - I was about to condemn the BBC when I noticed that it was using Chrome.

  The local weather update did not work for a few months now - the question of the police is on the last two weeks.

  Hello, try pressing ctrl + 0 ("zero") while you are on the page to restore the zoom level or where it does not browse other troubleshooting procedures common to the Web sites look bad or appear differently than they should.

• Windows 7 on the new installation will not update...

  Any machine that I use, I have about 5-10 daily I install freshly, I can't get Microsoft Windows updates through the web. I end up having to add the machine with no updates to the domain and use WSUS for updates on the system from one day to the next in the case otherwise it can last 24/48 hours before actually start in Microsoft Windows to install on operating systems updates.

  The Machines are all Dell Optiplex, or series Dell Latitude...

  They range from 7020 9010 desktops and laptops Latitude of 5670...

  Minimum specifications are processors I5, SSD 250 GB and 8 GB of DDR3 memory minimal...

  So I know this isn't a problem with that...

  The Windowsupdate log shows nothing out of the norm...

  It didn't become a problem until version 10 of Windows was held... Now it is almost useless to attempt to run updates the Microsoft Site...

  Is there any solution for this?

  Or do I just have to call Microsoft?

  I actually found a solution to this today...

  Figure that I'd share...

  It requires 3rd party tools...

  But inside, you install a trial version of server 2k8R2 and install a trial version of WSUS. Unless you already have it running on the network... In this case, the production of WSUS works very well...

  Go here: http://download.wsusoffline.net/

  Download the WSUS Offline software (10.6.2 works with windows 7 x 86 and x 64)

  Install it...

  Run it...

  Configure it to pull updates from windows of your WSUS (Http://WSUSServer) Server

  Once you do that...

  Click on the updates that you want to make ISO from the server files...

  Click on check the downloaded updates

  Click on include Service packs

  Click on the box global update Windows 7 X 64

  Click Start

  The software will create an ISO of all approved windows 7 updates from your WSUS server...

  At worst it takes 10 minutes to create the ISO and an another 30 min to install on your desktop...

  You will need a DVD/R

  You will also get invited when you jump the disk in the Windows 7 machine, you want to click on the boxes that indicate automatically, restart and continue, then check the box to stop when you're finished...

  It took me about 30 minutes to run 200 + windows updates, but I've included the Office updates in my ISO as file... so it would probably take less most of the machines on...

• new links will not update

  I've added new links to the page

  but the get error code when trying to view.

  http://ialegion.org/ALA/membership/membership.html

  The link of the National report

  http://ialegion.org/ALA/membership/NationalNov5.PDF

  works very well.

  The report of the Central Division link points to

  http://ialegion.org/ALA/membership/Central%20Nov%205%20.PDF

  %20 in the link, a space (such as pressing the SPACEBAR on the keyboard)

  You have downloaded a PDF named precisely 'CENTRAL 5 Nov.pdf' (CAPS and spaces) to the Member Directory?

  Try to remove namespaces from PDF file, download the PDF file, add a link to the PDF file on the Web page and re - download Web page.

• Stream Podcast shows of new episodes, but feed validators and subscribed itunes do not update

  Hello everyone, I ran a rather strange problem this morning during the release of my latest podcast episode.  When I publish a new episode, it appears in the flow, but it will not appear in itunes.  I know that there is a delay for the itunes store to show the episode but the episode shows when I check with a subscribed podcast app.

  Here is my podcast on itunes:

  https://iTunes.Apple.com/us/podcast/Church-collective-worship/id672308308?MT=2

  The last episode is in the RSS feed and as far as I know, everything looks ok:

  http://thechurchcollective.com/Podcast-RSS

  But when I look at the flow through a feed validator, it won't show the most recent episode of today.

  While trying to figure out what might be the problem, I tried to put the audio from today in last week's episode (108) and when I go there to play, he continued to play audio from last week even though the RSS feed shows that I put another file in the enclosure.  If for any reason, the stream no is not updated even if it is actually updated.

  Thanks in advance for your help, I've learned a lot already just looking through this community.

  The store, by subscribing in iTunes and the stream itself illustrated all episode 108 as the last and at the reading of the episode in iTunes that it promises to be 108.

  Your web page to the http://thechurchcollective.com shows an episode (number 14), dated today. It has a built-in Soundcloud player, which seems not to be the case with episode 108, and such a player will not work in iTunes (if it's probably why Wordpress is not placed in the flow).

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Why the Firefox 4 is not restore all the sessions that were open at the time? Before the update, I've been invited either ("SAVE AND QUIT") or even if she closed UNEXPECTEDLY (crushed), he AGAIN restored. New version does not offer "save and exit".

  Question
  Why don't Firefox4 restore any sessions that were open at the time? Before the update, I've been invited either ('SAVE AND QUIT'), or even if it closed UNEXPECTEDLY (crash etc) it STILL restored everything. New version does not offer "save and exit".

  Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session."

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• Windows 2008 Server: unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Hello

  I suggest you to send your request in this forum for better support.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• Windows Media Center sports and News will not update.

  Sports news will not update... The internet connection test is ok.

  Doesn't make sure that no firewall or internet security tries to block.

  You can post here: -.

  https://connect.Microsoft.com/site1145/feedback

  Note: You need to sign in to submit a question of data quality.

• Code error C00D1197 and media player says key is missing and require a periodic update as new movies may not play in trying to play a Blue Ray dvd.

  Original title: COOD1197 error code

  When I try to play a Blue Ray dvd (who played originally) said media player an essential component is missing and I need a periodic update as new movies may not play. You want to update now. I select update now. the message just for rehearsals.

  Hi procheGordale,

  1. you remember to make changes to the computer before this problem?

  I suggest you follow the steps from the link below.

  Windows Media Player C00D1197 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Note: You can also follow these steps for Windows Media Player in Windows Vista

  Also check out the link:

  The protocols in Windows Media Player use for streaming?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming

  You can also try the upgrade of the safety component for reading protected files.

  To install the security update, visit the Microsoft Web site at the following address:

  http://go.Microsoft.com/fwlink/?LinkId=75378 (http://go.microsoft.com/fwlink/?LinkID=75378 )

  You can also see the following article for more information:

  You may be redirected to a Web page when you try to play Windows Media DRM protected content once you upgrade to Windows Media Player 11 or to Windows Vista

  http://support.Microsoft.com/kb/919589

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Paths of folders Shell not updated on the new profiles

  On a recent update to an image, I noticed that the paths in the Shell registry records part were not updated according to new profiles. They were staying as they were in the registry of the user by default when the image was created. I couldn't find a way to solve this problem, and it was causing problems with some programs unable to find the location of the files. Finally, I created a new image from scratch and prepared the image using sysprep and the same unattended xml file that I have always used. I fully expect this new image do not have problems, but again the paths were not updated. I can't find any reason for it. Paths of folders Shell remains static on the account used when creating the image and not update the paths for each new profile. For now I use an older image which has not been affected by this, but requires the manual update of several pieces of software.

  The procedure I use to create an image is:

  ·         Connect with the local administrator account

  ·         Set profile options

  ·         run sysprep with the / generalize switch using an unattend.xml file with CopyProfile set to true in the phase specialize and capture the image

  I found several old messages on the internet in terms of static paths in the files of the shell, but none mention a cause or how to solve the problem.

  Hello

  Thanks for posting your question on Microsoft Community!

  I suggest you to ask your question on the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps!