New installation on this PC, but no functions > e/s measurement > NOR-DAQmx subpalette; How to put there?

Similar Questions

• Creating a backup of the WIN7 OS only for new installation; is this possible? If yes tell me how please.

  Well, then I want to get a new drive hard but with a greater capacity. Mine is 320GB and I want to upgrade to 500 GB. I have two laptops and one I would like to back up the operating system for a new installation (for the other computer hp g56-130sa laptop) for the new drive HARD must be installed.
   
  Can it be done?

  Not for another laptop.  If they were the exact same books perhaps, but even in this case this is only a possibility.

  If you need to reinstall the operating system on your laptop, you have two choices.  The first and the best choice is to contact HP directly and try to get the recovery disc specific for this laptop.  The second choice is to buy a genuine Windows 7 installation disc.

  I suggest that you contact HP because it will be the best solution (and much cheaper).  If you are in the United States / Canada, give them a call at 1-800-474-6836 and talk to a representative for the recovery disc for this laptop.  If you are outside this area, you will need to go to www.hp.com/support to find contact information.

• Hi, I think to buy new Apple TV this week but I have heard leaders that Apple can bring out a 5 model generation in 2016. Apple offers me an upgrade, or are they likely to say tough luck? It makes hesitate. Thanks for help.

  Should I buy the new Apple TV when Apple can bring out a new model in 2016?

  They just released a new Apple TV. Highly unlikely for a new model soon, however, we are not allowed to discuss future products here. It's against Apple Support communities terms of Service.

  If you wish, buy it. If this isn't the case, don't.

  I hope this solves your issue.

  Best regards

  Austin

• I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

  Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

  The anonymous gives path is for Vista not XP.

  The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

  See:
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  Display the hidden files and folders

  In XP, the path is usually:
  C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
  ("xxxxxxxx" is a unique alphanumeric identifier)

  When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

  See: recovery of data from an old profile

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites

• Function of scrolling of the mouse after a new installation.

  Hello, when I got my laptop (m6 1125dx Envy) I had a nice feature that allowed me to scroll through the pages under the mouse cursor when the page is the subject of a scroll is not the current page. It was great when look a things side by side and comparing elements. Having to click on a window to make it active just to scroll is a pain. This is a default feature in ALL linux distributions and I missed a lot when I'm on windows.

  When I got this laptop windows 8, I found that I had this feature. I was happy to extreally. After awhile, I reloaded my operating system with a new installation of windows 8 and noticed this feature is now gone.

  I installed all the drivers and the software that was in the file "c:\SWetup". I've updated all the drivers from the HP website. Still no scroll mouse of pages under the cursor.

  I know there are applications of third party like katmouse and others who do this, I tried them and they do not seem to work in windows 8.

  It's something that came with the laptop. Can someone give me a helping hand for this feture back?

  ChangedSoul,

  You can enable mouse Hover in two ways:

  Windows key + U (open access) >

  If you have not previously opened the ' Centre

  then

  Uncheck both "always read this section aloud" and "always this section analysis.

  Select / Open "Make the mouse easier to use" >

  Under "Make it easier to manage windows" section >

  CHECK "Activate a window by hovering over it with the mouse.

  Ok

  -----------------------------------------------------------------------------------------------------------------------------------

  Comment

  This method should work, and if this is the case, it will also be enable the development by mouse and POP before the window where you point your mouse.  Frankly, I find it irritating.

  More likely, because you're in the Linux world, looking for likely action "Set mouse without Pop" first defined in Unix all these years and then moved to Linux as the obvious of the window control decent method.  Yes, I'm a little prejudiced, but only a little.  The smile.

  Glide mouse (no window pop) to Windows 8 is easy to configure. It requires a simple registry hack to set the mouse Hover in place.

  Windows key + R > regedit > OK

  Once you have full registry > export a copy of the register to your favorite folder

  Open key HKEY_CURRENT_USER\Control Panel\Mouse

  Change the value of REG_WORD ActiveWindowTracking to 0 × 0000001 (1)

  Open the key HKEY_CURRENT_USER\Control Panel\Desktop

  Change the value REG_BINARY UserPreferencesMask, MSB (most significant byte or the first value in the chain), at 01

  Example:

  The FIRST value of the string can be 41, which displays the front window > change the value 01

  The FIRST value is perhaps 9f > replace the value 01

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  OPTIONAL:

  If you want to slow down the reaction of the constant focus, you can add a delay to the duration of the window to change the focus after the mouse is moved.

  Key HKEY_CURRENT_USER\Control Panel\Desktop

  Change ActiveWindTrkTimeout REG_DWORD > a value you like

  Examples:

  0 × 00000080 (128ms)

  0 × 000000c8 (200ms)

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Save and exit >

  Restart / reboot the system and log on

  Fact!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Lightroom is as this is a new installation

  I had problems with LR, newer some CC. I try to open and it either acts as a new installation or it says that catalog 2.2 is already used. I, m awfully darn tired of this. I have 44 000 pictures in my catalog and I need a stable catalogue. I have new backup, I need to replace? Thank you. PC, Dell POS running Windows 10.

  Means 'Catalogue already in use' the previous run of LR out correctly.

  In the folder containing your catalog file (*.) LrCat), there is a file with the same name but with the extension ".lock". Delete the "." Lock file '. Delete nothing else.

• I have can´t install creative cloud. I received the message: "you need a creative Cl to solve this problem, but it is absent or is injured. Please download and install a new one. But this doesn´t works.

  I have can´t install creative cloud. I received the message: "you need a creative Cl to solve this problem, but it is absent or is injured. Please download and install a new one. But this doesn´t works.

  Uninstall anything cc which can be installed.

  run the cleaner, the use of the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  then reinstall apps download Adobe Creative Cloud | CC free trial Adobe

• first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

  first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

  Jürgen Freund

  First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

  I found this YouTube video about the error 126 precisely to solve the problem.

  How to fix the ERROR 126 when you open programs OpenGL - YouTube

  The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

  LoadLibrary failed with error 126: could not find the necessary

  Please let us know if it worked for you.

  Thank you.

  RTA

  Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.

• After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  Try typing the key to recovery without 5 dashes.

• I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  The problem lies in a PC with Windows 7 32 bit

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• When I try to bookmark a new page, I don't get the window of "Page bookmarked or edit this bookmark. I t place the site in my favorites, but I have to go to "organize" bookmarks in order to put it where it belongs.

  When I try to bookmark a new page, I don't get the window of "Page bookmarked or edit this bookmark. I t place the site in my favorites, but I have to go to "organize" bookmarks in order to put it where it belongs.

  Which extensions you have installed?
  It seems to me that some sort of 'social bookmarks' extension changed this window edit this bookmark, based on the presence of this line of "Rating" at the bottom.

• iPad safari crash, reboot back to the home page of safari. Has begun to do this with 8.1 update and never stopped. I hope that new updates should solve this problem, but they did not. I will not buy an Apple product once again.

  MY iPad hangs on web pages to the home page of Safari. Started to do this with the 8.0 update way back. I kept hoping that each new update which would stop, but it's not. I is very annoying! According to me, I don't want another Apple product. I've seen other messages on this same thing and some answers say to hold the home button and button simultaneously until iPad goes out but this is not enough. Apple does not seem to care to fix it after all these months.

  If you think that every iPad 2 does that and ignored, Apple?

  You realize that it could be a website that you visit that could cause this? Or an application that you have. What did Apple say when contacts you to this topic? What else did you do besides a reset?

• I need to enter the password to load the new software, but I don't remember ever having a password how can I solve this problem?

  I am trying to load new software on my computer but it keeps asking for a password for security and I do not have a password! Can I put this somehow?

  Maybe he wants your administrator password.

  It is the MSE Forum and is not a question about anti-malware Microsoft Security Essentials (MSE) program.

  Suggest that you post your question in the appropriate forum for your operating system: http://answers.microsoft.com/en-us