New installation-Vista is slow, lock up and "not responding".

Similar Questions

• I have updated Dreamweaver for 2014 and this toolbar disappeared.  I have a new installation of 2014 on another computer and the toolbar is there.

  I have updated Dreamweaver for 2014 and this toolbar has disappeared.

  

  I have a new installation of 2014 on another computer and the toolbar is there.

  Anyone know how to get it back?

  I'll make sure "Enable related files" is checked:

  

  Otherwise, click on apply once checked and then restart Dw.

• Malware? Firefox downloaded "new version 33.02" on my system and not subsequently visible on "about firefox"

  Malware? Firefox downloaded "new version 33.02" on my system and not subsequently visible on "about firefox"

  The last current version is 33.1. Please get the latest version and later to getfirefox.com if this 33.1 is not listed as your current version.

• Office locks upwards and not Windows Server 2008 R2 remote let me reconnect

  I was having problems connecting to a remote system with RDP.  The server is operational for several years and is one of the 4 servers identical servers located on the same site.  Recently, one of the other servers crashed I was remoting in a long time so I had to start using this RDP server in.  Once our on-site personnel COMPUTER redirected to this NAT. port forwarding by server, I was able to connect remotely to make some changes, including the addition of a role as a remote access server VPN using the Routing and remote access Server Setup Wizard and removing the component of protection against threats Symantec Endpoint Protection network so that I can use and configure the Windows Firewall.

  While working through the Routing and remote access Server Setup Wizard, my locked up and disconnected RDP session.  I was able to reconnect once on-site staff completed the wizard and restart the computer, but once I reconnected it, after a minute or 2 I was even once disconnected and could reconnect not until the server has been restarted.  I presume that add the VPN role affected my RDP access and decided to remove the VPN server role.

  Now, I can't RDP on the server unless it is freshly reset, and even then it only allows me to stay connected for a few minutes before the connection is lost and I can't reconnect again until the server is restarted.  A vicious circle; power of connection after restart, only to have the connection dropped and requires a restart to reconnect again.

  This server also hosts a database that client systems are able to access for a short period of time after before restarting their connection drops.

  I quadruple checked the inbound Windows Firewall rules, uninstalled application anti-virus completely, same goes for as much as duty get their request for removal to ensure each piece of it has been removed, and I always have the same question.

  The whole issue started when I tried to add the VPN role.  I can't uninstall and then reinstall the anti-virus repeatedly has not helped either, but as it is right now, I have a server who, shortly after the restart, is unable to communicate. not with the internet, not on the local network, not remotely.   On-site staff are trying their best to follow my troubleshooting over the phone, but he arrived at a point where I will have to find out what's wrong and provide an easy solution to remote, or make a trip to halfway around the world to try to figure it out myself (which would be EXTREMELY difficult/close to impossible right now).

  Quesitons:

  (1) why would I be able to connect to remote after the reboot and disconnected then shortly after? (Service/application causing the problem didn't start until shortly after a restart?)

  (2) why is it not only kill remote access, but access LAN and internet on the server?

  (3) what else can be verified to help diagnose and fix the problem?

  I did a lot of research on the web but haven't found identical to mine problems.  Is this a new problem or a bug?  I saw information about uninstalling a patch and a seen a fix for the problems of the RDP, but who wouldn't even help LAN and access on the internet server.  This server ran local client local RDP, access to the database access and could have access to the internet for the years leading up to the recent changes and issues.

  Edit: The pro I'm remote on the server is a system Win 7 Pro, and the database of customers are also Win 7 Pro.

  Correction of the problem.  Turns everything by making the configuration for VPN, incorrect information has been entered in the network link, causing the network to the bomb once VPN service started.

  There are several LAN ports on the server, and one of them was selected incorrectly and configured with the incorrect gateway IP address during configuration of the VPN server.  Once the misconfigured for the LAN port TCP/IP parameters have been removed, all was good again.

• Has made a new installation, now Dell 962 printer will work not (Win7)

  So all of the facts are:

  I got a virus on my computer of who knows where. Whatever she is, she decided to remove part of my hard drive. So I had a few antivirus and anti-malware programs, and they did too good a job - I damaged my registry.

  If I had no other choice, but do a re-install. I didn't do a new installation; This is the option where all he moved to Windows.old. If the computer is good again, except that my printer is not working correctly.

  First, I tried the drivers from the Web site. I tried R151565, which should have done the job. This configuration is behaving oddly, however. It is scheduled to end after he installed the All in One Center, and it is supposed to leave me with a printer that works. This isn't.

  Then, since it was a re - install, I had to install updates. An update of the driver from dell was one of them. So I thought that this would solve things. The update was successful, but my printer is not installed.

  It never happened to me. The printer is not compatible, or it works. This feels like the printer is in limbo. So, I tried to think about what might be wrong. I looked in devices and printers, and there that caveat to sign on my printer. Then I looked in the devices, and I noticed this strange thing

  

  Why do I have two entries for a printer? This must be an allusion to the problem, but I do not know the answer. I imagine that there must be at least one person who has encountered this kind of problems. Please, help me. Research has brought me here many times, but I could not find a solution that matches my problem

  Hi KenLJ,

  Thanks for writing on the Dell Community Forum.

  We recommend doing a clean install of the operating system. Asking you to back up data from the Windows.old folder. Please use this link http://dell.to/1sU6QJ3 to restore your Windows 7 computer to factory settings. If this option does not work, then you can manually reinstall Windows 7 using this link http://dell.to/1mN6P6v. If you want the printer don't work, please uninstall the printer driver. Unplug the printer from the computer. Download the printer driver from this link http://dell.to/1IXOCus and install it. Connect the cable from the printer to the system only when the system prompts you to connect the cable. Continue with the installation, and it would print the test page once it is installed. There are two entries in the Device Manager, one for the scanner and the other is for the printer.

  Answer please if you have any other questions.

• Freezing and not responding Vista plus-Windows «»

  I have problems with Windows Vista Ultimate Edition 'freeze' and message "not responding".

  Dale

  Hello

   
  • What is the full error message?
  • When exactly the computer freezes?
  • Where do you get error message "does not?
  • Did you the latest changes on the computer before the show?
   
  I suggest you follow these methods and check if it helps.
   
  Method 1:
  It may be that a third-party application is causing this issue. Put the system in clean boot and see if you can install the update. Follow the steps mentioned in the article to configure the system to boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135    
  Note: After the article troubleshooting steps, follow step 7 article to start on normal startup.
   
  Method 2:
  You can also read the following article and check if it helps.
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685
  
  Method 3:
  I also suggest you to optimize Windows Vista for better performance and check if that helps:
  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
  If the problem persists I suggest to check in the event viewer and let us know which program is causing the problem.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• Box of Message of glitch-slow blackBerry Smartphones and not show all Messages

  My message Inbox is only show of Face Book and BB messenger and a missed call.  Call history his watch is not my E-mail SMS, MMS, or full. It also shows that about 3 days worth of information. It also takes a long time to load and once no info was present.

  Even more strange, is when I receive a message from the folder gets its red icon.  But, when I click on it, nothing new in there.

  It appreas that I consult only some info and not all the info in my 'Messages icon. My emails can be access by there respective folder. These file seems glitchy so.  When I click on them and see all messages sometimes always displays the unopened icon.

  Help, please.

  Thank you

  I tried switching the default 4 themes on the device and still not go. Then I downloaded and installed a new theme and then switched back to my original them and that seems to do the trick.

• My windows vista Loader summary is enclosed. will not respond to the keyboard.

  This Dell PC locks up and my daughter has turned it off. He did this several times. Now, it will not be to all. The screen indicates that the previous attempt to retake an unexpected interruption failed. It does not start in safe mode, and it does not meet strikes. I already checked the connections and switching of the keyboard USB port to be sure that it was not a mechanical problem.

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Satellite L650 - extremely slow at startup, then "not responding" message

  I bought my Toshiba Satellite L650/017 laptop about 3 weeks ago and it was working well.

  This week, I plugged a cable to work on my laptop and double clicked on the icon of Internet Explorer to see if I had access to him but found it is not the case then disconnected the cable and turned off the laptop computer on the internal internet.

  The next day, I found that the laptop could not start after restarting it a couple of times so I ran on safe mode and did a virus check which proved to be negative.

  The next day, start seemed a bit faster and I could access some of my Word documents stored on the hard drive.

  Today, problems with the start seemed even worse and it took about 10-15 minutes to access the WINDOWS page - mainly get a gray screen with cursor work dark.

  When she has finally reached the office page after trying to open any application after a few minutes, a message "not responding".

  How can I fix? What is initially to run so slowly?
  He doesn't has only few Word documents stored there on the hard disk. I hope someone can help me with this...

  Hey Buddy,

  To be honest in these cases where the error just sometimes, it s not clear what part is defective or if it s just a software problem. In addition you didn t post information on your Windows installation, which makes more complicated history.

  But if I understand you correctly, you can boot into safe mode without problems, right? Well, that would mean he s a driver or software issue because in safe mode no drivers will be loaded (just the standard Windows drivers).

  If you run the pre-installed Windows version, you should try to reinstall Windows from the HARD drive recovery function. You know about it?
  If this is not the case, see your user manual. A lot of information, you can find on this nice feature. :)

• Instances of OHS become restarted and not responding

  Hello

  We have about 8 instances of OSH on Windows 2008 R2 server installed and configured on these 8 cases webgates. We also OAM SSO for all these applications on these 8 cases. But suddenly SST does not meet all user requests. OHS logs, I see that restarting the server every 2 minutes. Even the static files on OSH server is not responding. I commented also include webgate.conf on server OHS and it helped too much.

  This is the error we receive the newspaper to opmn.

  [2015 10-19 T 08: 11:51 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:5052) [connection receive timed out]

  [2015 10-19 T 08: 11:51 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] inaccessible process: ohs8 ~ OHS ~ OHS ~ 1 (13:5052)

  [2015 10-19 T 08: 11:51 - 07:00] [opmn] [NOTIFICATION: 1] [663] [pm-process] stop: ohs8 ~ OHS ~ OHS ~ 1 (13:5052)

  [2015 10-19 T 08: 12:23 - 07:00] [opmn] [NOTIFICATION: 1] [662] [pm-process] departure: ohs8 ~ OHS ~ OHS ~ 1 (0:13)

  [2015 10-19 T 08: 12:33 - 07:00] [opmn] [NOTIFICATION: 1] [665] [pm-process] process living: ohs8 ~ OHS ~ OHS ~ 1 (13:20956)

  [2015 10-19 T 08: 13:24 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:20956) [connection receive timed out]

  [2015 10-19 T 08: 14:15 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:20956) [connection receive timed out]

  [2015 10-19 T 08: 15:06 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:20956) [connection receive timed out]

  [2015 10-19 T 08: 15:06 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] inaccessible process: ohs8 ~ OHS ~ OHS ~ 1 (13:20956)

  [2015 10-19 T 08: 15:06 - 07:00] [opmn] [NOTIFICATION: 1] [663] [pm-process] stop: ohs8 ~ OHS ~ OHS ~ 1 (13:20956)

  [2015 10-19 T 08: 15:38 - 07:00] [opmn] [NOTIFICATION: 1] [662] [pm-process] departure: ohs8 ~ OHS ~ OHS ~ 1 (0:13)

  [2015 10-19 T 08: 15:48 - 07:00] [opmn] [NOTIFICATION: 1] [665] [pm-process] process living: ohs8 ~ OHS ~ OHS ~ 1 (13:14576)

  [2015 10-19 T 08: 16:40 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:14576) [connection receive timed out]

  [2015 10-19 T 08: 17:31 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:14576) [connection receive timed out]

  [2015 10-19 T 08: 18:22 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] process Ping failed: ohs8 ~ OHS ~ OHS ~ 1 (13:14576) [connection receive timed out]

  [2015 10-19 T 08: 18:22 - 07:00] [opmn] [ERROR: 1] [] [libopmnohs] inaccessible process: ohs8 ~ OHS ~ OHS ~ 1 (13:14576)

  Help, please!

  Just made a change to webgate profiles and copied to instances of OSH. This solves the problem.

• New installation of Windows 7 fails KB2742613 and KB2861208 updates.

  Hello, I tried a clean install twice on a USB key and both times these updates fail.

  Both are updates .NET Framework 4.5 security. I install Windows 7 x 64 Home Premium SP1.

  I'm not sure that anything to try. When they fail he's not trying to install again when I check updates again. I tried to reset the Windows Update components.

  I also tried to install manually, but installation fails, saying that it does not apply to my system at the beginning.

  Any help appreciated.

  Try the Microsoft .NET Framework repair tool
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=30135
  http://blogs.msdn.com/b/astebner/archive/2012/10/12/10359320.aspx

• browsers and slow web pages and not much operaring

  Google chrome, att yahoo home page and various web pages are slow or unresponsive. My system is windows 7 with a new 64-bit computer.

  How is it in Safe Mode with networking?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  What happens if you test with another user in Windows?

  You picked up some malware?

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  What do the Task Manager learn you during the slow response time?  For example, this process uses all CPUS?

  The the task manager of Windows Vista (or Windows 7): more difficult to detect changes
  http://articles.TechRepublic.com.com/5100-10878_11-6161050.html

• How to reinstall Vista after that HDD replaced and not reinstalled media

  My HP Pavilion m9080n HDD is a failure.  I would like to do a clean install (but would also be OK with any method) to rebuild on a new hard drive.

  * original title - how to replace a hard drive failed by a new hard drive and reinstalling Vista because my computer did not come with full support (just a recovery partition)? *

  Hello

  Contact HP and ask them to send you in recovery vista disc to reinstall the operating system back as it was when you bought it on the new drive

  they do it for a nominal cost of $

  http://welcome.HP.com/country/us/en/contact_us.html

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• New version lost all my saved passwords and not save everything - I tried help

  Earlier versions of registered FF going on very well, but for the two latest updates that the function has stopped working. I tried the steps in the FAQ "passwords not saved", even changed my story custom to always save settings. I don't care. Don't make passwords or even asking me. All passwords that had been in my profile for the last two years are no longer visible in the window of the options "show saved". Should I uninstall Firefox and start over?

  Jay

  The extension 'Remember password' has been reported to cause problems with passwords disappears, so if you have this extension and then remove (uninstall) it.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

  It is possible that there is a problem with signons3.txt (encryption key) and logins.json (encrypted names and passwords) in Firefox.
  You can open the logins.json file in Notepad (Firefox/tools > Web Developer) to check its content.
  Click on the button to "Pretty Print" to fit the file for readability.
  If there are names and passwords encrypted in logins.json there is probably a problem with the signons3.txt file that stores the encryption key.
  You can rename the file signons3.txt (key3.db.old) and the logins.json (logins.json.old) file or move these files to another folder to make it possible to cancel the action.

  Rename or delete a file of possible signons.sqlite (signons.sqlite.old) used by older versions of Firefox as well.
  You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• I'm trying to download a trial version of illustrator and it is be extremely slow, eventually close and not fully install

  Does anyone know why I can be having issues download the trial version of Illustrator on my mac? I never had problems with downloading of any software, and Adobe has never been slow.

  Clear Tmp folder.

  If you use Wireless / Wifi Internet connection, if possible try with wired Ethernet connection.

  Disable the firewall if this is ON, temporarily.

  Or you can also download Illustrator using the direct link:

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools