New issue of electric power connection

Similar Questions

• Dell 11 7140 place - do not start after reboot and shutdown without power connected

  Hi all

  I had problems with my new Dell 11 7140 place since I bought it. If I reboot or shutdown the Tablet without the power cable plugged in, it crashes on start/stop to a black looking screen as he stopped (but it isn't). He will sit on this State forever or until the battery is completely discharged. If I press and hold the power button for 5-10 seconds I can force a shutdown and turn off the tablet.

  It's even worse if; After that I have to reboot the machine, it just sits there on the circle of rotation points and never goes anywhere. After a few tries, it will eventually in windows recovery, but he never manages to recover anything. The only way to get the Tablet working again is to reimage the dos operating system.

  I tried the following:

  1. Most recent of the installed BIOS A07
  2. All the latest pages Dell device drivers
  3. The latest version of Windows Update
  4. I tried to start in safe mode, but get points again spinning
  5. Tried to restore points that had once or twice the PC to start again, but the system is messed up. Built in Windows apps like photo viewer don't work anymore and I just to reimage.
  6. Tried running the Dell diagnostics, but which did not find anything wrong

  The funny thing is that if I reboot or shutdown with the power connected, then everything is OK. I can do this all day with no problems. Standby and hibernation work OK with no power attached.

  I have tried everything I can, but I'm at a stage where he's going to have to go back to Dell. Please can anyone give me any suggestions of what I can try, thank you.

  To follow up on this post, the final solution to this issue was to return to the Dell Tablet. The motherboard has been replaced under warranty and since it was returned to me I have had no more problems.

• Satellite A205 freeze after the power connection

  My computer has this strange problem. It stops completely after that I have plug in the power supply.
  What I do now, it is let it recharge when it is off and use it without food.

  There is a chance that it works with the power connected, but generally, it stops again in the trunk.
  If the battery is low and I connect the power usually, it stops right after that I do, sometimes not.

  I also tried to install Linux. But the same thing happens (except by the fact Linux only stops in the trunk)
  I'm now using Windows Vista.

  Thanks for the time and sorry for the English.

  > any suspicion?
  As suggested above; It looks like an electrical problem on the motherboard power supply. Maybe the motherboard must be changed.

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• New issue of case... A very illogical

  Hey,.

  Now this particular problem is as the title says: very illogical.

  I can't find no explanation for this, so I thought that I ask here to see if anyone has experienced this before:

  I bought a new case some time and were not able to get to power, it flickers on for a second or two (turns on, the CPU fan turns briefly).

  First I thought it has problem with The headers being in the wrong order or Incompatible with the motherboard but after more experimenting I found that's not the problem. I placed the in the right places and all the headers are made of a universal standard, so its neither of those two Causes.

  I put the material in the new case but left it connected to the original case so all the new case was held the material, the headers are of the original case, so I used the power of the button to power it on but it does not always, sound almost as if him refuses to work while material that in the case of new , It works perfectly in the old, but will still be held by the new a matter connected to it.

  I'm completely confused and a little annoyed that I spent 45 books on this case, which is a lot for me right now, and he might have been lost

  Just in case its relevant: the PC in Question is a Compaq Presario SR5019uk and it comes to an Aspire X-discovery

  Any idea?

  Thanks in advance

  SGMAlice

  SOLVED! THIS MARKET! WOOOO!

  I had the motherboard screwed on too tight XD rofl, so Simple yet The Cause Of much Annoyance, I had never thought it could be "tight".

  I guess the old adage "you learn something new every day" is as accurate as I have always held that it is.

  Thank you very much my friend, you have my eternal gratitude

  SGMAlice

• False values of voltage using NI 9225 and ELectrical Power Suite 2014

  Hi all

  I have a few problems regarding the use of a map of analog voltage NI 9225 with code exaple quality Applications of power (cRIO) (Delta-Sigma) of the Electrical Power after 2014. Running the example code I values of voltage wrong, they are exactly doubled! For exaple with a 230 V RMS input I get 460 V RMS. I think the problem is the module, because by default, the code example expects to use a module NI 9242. Before the upgrade to LabView 2014, everything worked perfectly with EPS 2013. Am I something missung? I configured the C module in the project manager in the same way that I used with EPS 2013. Can someone help me? Thank you

  Gianluca

  Hi Gianluca,

  If you use other types of modules in the example, you must take care of the conversion of accuracy in the FPGA VI.

  As FPGA VI resampling takes the signal of type fixed point +-24.1, you convert the +-24,10 and-24,5 to 24.1 in the Data Acquisition loop before feeding to the FPGA VI resampling.

  And in the loop of data Communication, you restore the output of +-32,3 to 32,12 - signal + and +-32.7. Notice at the time the zoom in and zoom out are equal.

  If you change other types of modules of different precision, you must change the precision of the given thread.

  For example, 9244 accuracy is +-24.11, so when you convert it to +-24.1, you must restore it by variation of-32,3 to-32,13.

  Please refer to the screenshot:

  

• I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  Hello

  1. what happens when you use a wired connection?

  2. how many devices are connected to the router?

  This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

   

  Hope this information is useful.

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• new drive for edge power 2850

  Good Moorning, I need a new disk for the Power Edge 2850 server with serial number ADMIN NOTE: maintain the label removed by privacy policy >

  the disk should have 146 Gb 10 K RPM

  Thanks Ida

  BTW, readers must be 146 GB / 10K... they can be 146 GB or more and turn to 10K or 15K and still be compatible with your server and your table.

• After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

  After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

  Seems to be counterfeit software.  Checked the site and has the wrong serial number.  Looking to show several spelling mistakes in the 'fine print' on the box.

• I bought adobe contribute in 2007. I would like to download a copy for my new computer.  When I connect to my adobe account, I see the product and the number series, but idon't see a link to download.  How can I download it?

  I bought adobe contribute in 2007. I would like to download a copy for my new computer.  When I connect to my adobe account, I see the product and the number series, but idon't see a link to download.  How can I download it?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Can I buy, install and run Illustrator on a new iMac without any internet connection?

  Is it possible to buy, install and run Illustrator on a new iMac without any internet connection?

  I used Illustrator since 1989 and am currently using CC2014 to work. Don't laugh now, live us simply at home and don't want or not have internet there.

  I want to buy a new iMac for home, but do not have access to Illustrator and other software, because we have no internet, what is the point of having a new iMac?

  tpmaree,

  I'm scared of all the versions of CS3 on will sometimes require internet connection: upon activation of the installation/initial at intervals always then.

• I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  Sure.

  Download it from

  Adobe - Lightroom: For Windows: Adobe Photoshop Lightroom 5.7.1

  Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1

  Install and enter your serial number.

• New issue: trial software is available on CD or DVD?

  Here's the original question:

  Unfortunately, we're on Hughes.net and so that we can not download something that takes more than a few minutes because of their speed and bandwidth restrictions.

  Is there a way to get the software to test through paper, CD or DVD?  If there is not, then this whole process to this point has been a waste of time.  Thank you...

  Answered by RAVE:

  You can contact customer service at the 8008336687 and ask for a CD / DVD for the software you bought to be shipped to you.

  The question was for the software test , not the PURCHASED software.

  New issue: trial software is available on CD or DVD?

  The tests are not available on CD/DVD, but you can contact the 8008336687 customer service and ask to buy CDs / DVD for use as a trial. Normally it would cost you around $20USD including taxes

• New... computer power supply begins with 20pin but interrupts when 4 pin is connected

  I read through many of these posts and they were very helpful. I'll try to make this short. I have a HP a1118x who gave me the flashing light feared on the power supply after a recent power outage. Rather than view this forum, I assumed that the PSU was wrong and ordered a new. 480 watt Logisys 20 + 4 pins. Put everything back together and it still won't turn. Then I found myself here all by searching for a solution. Following the advice on another post I disconnected, mother card power and plugged the 20pin record while holding down the power button. Yay, it worked... until I connected pin 4 directly behind the pin 20. Each cut off again thing. No power supply, no nothing. I plugged the video monitor in without the 4 pin and a computer but no video. I guess 4 pins may have something to do with the video. Any advice on what it takes to solve problems?

  This page is available to the motherboard: http://support.hp.com/us-en/document/c00257657

  If food had a connector 24 pin for the motherboard, it should also be a connector 4 separate pins that goes on the plug just behind the 20pin connector.  (do not part of the 20pin + 4pin connectors.   Universal power supply have a 4 pins that will separate from the main connector 20/24 pin to fit an old motherboard like yours) Possily got the two mixed up?   It is to power the CPU, separate from the Grill which is part of the main motherboard connector.   Either that or the CPU/motherboard has failed, too.