New on HR - Question .css

Similar Questions

• New record of question mark SSHD screnn

  My Seagate SSHD should fail, so I ordered a replacement.

  In the meantime I backed up with time machine on my external hard drive in my MacBook, and then I created a bootable USB key.

  This morning, I replaced the SSHD with a new one, but I get the white screen with a folder with an exclamation mark.

  It also happened that the laptop turns off unexpectedly. Could you help me please understand what is happening?

  Thanks yo!

  The question mark appears when the drive specified in the last

  System Preferences > startup drive...

  ... is not available. Your Mac can't find the boot drive, or the drive specified is not a bootable disk (does not contain Mac OS X).

  --------

  Start with the Alt/Option key, select your key USB Bootable and install on the new SSD.

  Long-term, make sure that you enable some version of TRIM, especially if your SSD is only 8 x the size of Mac OS X or smaller.

• New user e260 - questions

  My new Sansa e260 is my first mp3 player, so I'm still on a steep learning curve!  Can someone help me with the following questions please?

  1. the Web of Sandisk site has lots of information about the e200 series, but I don't know if all this refers to my e260, or if it is a newer model that requires an update of the instructions.  Even my User Guide refers to the e200 rather than the e260.  It is safe for me to consider the e200 data as valid for my e260?

  2. my Quick Start Guide says that my e260 must be in MTP mode to be used with Windows Media Player (I use WMP 11).  But the instructions for switching between the MTP and MSC modes do not apply to my device.  For example, there is no "USB mode" option on my menu settings.  My drive seems to be recognized by WMP perectly fine.  Should I worry?

  3. How will I know if I should update the firmware?  It is classified in my unit version 03.01.11F.  If I should update this, where can I get the download?  As I said above, my model does not appear on the Web site.

  Thanks a lot for any advice on these topics.

  Once again, clu31355, thank you very much for this valuable information.  I think that you have answered all of my questions... and much more!

  Have a great Christmas.

  Penners

• [^^ New here] Ask questions about the development of Blackberry GUI

  Hi everyone, im new here.

  (My English is not very good, but in any case I'll do my best to be understable).

  First of all, I'm going to introduce myself:

  My name is Díaz de Miguel (South America, Chile) and now I'm working with a team on what we called 'Santa Maria Mobile Challenge' here in my University (UTFSM, Universidad Tecnica Federico Santa Maria) and we have an app for phones mobile Blackberry... IM in charge of the User Interface of the application... so, here's my question:

  I conceive an idea of how it looks at the application (we are new to programming in java and J2ME for Blackberry), I designed in Photoshop, and with a few readings, I realize how can I do this on J2ME BB.

  In my research on J2ME and Clases de BB I think I can do this with HorizontalFieldManagers and VerticalFieldManagers... tie them a background image for each FieldManager (of course I have to divide my original and more image "images") and connect (or trigger) behaviour when he focused...

  The idea of this is to make each component of our application classes:

  IE: Where it says "task 1", which blocks will be a HorizontalFieldManager with 3 VerticalFieldManagers, one with the «!» Icon, the Second bearing the name of the task, in this example is "task 1", and the third will be the other information... and perhaps on the third HorizontalFieldManagers 2 more...)

  Well well... the idea of this post is to know if im on the right way to apply for ugly or there is a better way... I accept all the comments... I want to win this contest.

  Thank you!!

  Miguel Diaz

  ========================

  Reach:

  This is the Image:

  Hi and welcome to the development of BlackBerry,

  You are on the right track... It is difficult to design a beautiful blackberry app but you can do what you want with methods of painting FieldManagers und ...

  If you need help others let me know...

  Also if you need help doing some work im a blackberry developer contractor who is happy to help you any time...

  Concerning

  Paul Haenel

• BlackBerry Smartphones New user's question. Attachment / broadcasting a connection

  So I a new user question that I didn't see it in the manual for the "BOLD".

  I know that you can attach the "BOLD" blackberry via bluetooth and using the usb cable.

  The question is can I just broadcast using the phone to create a wireless connection, can I use it with a laptop as the iphone?

  Thank you.

  chk these items:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB05196&sliceId=SAL_Pub...

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB05178&sliceId=SAL_Pub...

• Smartphones New blackBerry with questions

  This is my first post.  Yesterday bought a Curve 8530.  My first BlackBerry ever. Lovin' the phone.  Got 2 things I want to understand.

  (1) all my contacts are in Windows Contacts.  How can I synchronize my phone with Vista?

  (2) is it possible to change all the icons to and from the desktop computer?

  I'm sure I'll have 1 million questions soon, but these are 2 for now.

  Oh Yes.  Stayed up to play with the software that comes with the phone (Desktop Manager and Roxio) and just when I started to get the hang of it, got an update today all night and it was gone.  New software makes no sense to me and I don't know how or why I need to use it.  Any suggestions on what I'm supposed to do with this?

  Thanks for any help you can provide.

  One is enough... I'd go with DM 6

• New ESX5 host - questions see SAN storage data and much more

  Just installed a new vSphere host 5 and added to a cluster with 2 x 3.5 host (in my vCenter Server 5)

  3 questions.

  1. I can't see LUN (on SAN datastore). Have zoned out my new HBA etc and still no joy. Tried the host that it recharges and rescan option etc. Any ideas?

  2 - my 3.5 hosts I was able to specify different default gateways for my Console and VMKernel Service (both on the same vswitch). I have the Service Console configured vmkernel. 10.16.5.x and 172.16.5.x (I know there is no Service Console in vSphere 5\ESXi) but on my ESX5 host I can't specify different gateways for VMKernel and network management. I'm afraid that vmotion etc will not work between 3.5 hosts and host 5, because although the VMkernels have addresses in the same range, they have not the same gateway. I have to add a local route on the host ESX 5? Or am I wrong configured somewhere?

  3 minor irritation. My local drive in my new server is showing that the data store. Can it be hidden or changed to not be visible in the data store? I want to only display my SAN data stores.

  Thank you very much

  Steve

  (1) sounds like a SAN configuration problem - you should be able to see the LUN masking and zoning is correct in the FC switch and storage array.

  (2) you could specify wear two ways because the vmkernel and the Service Console were different and supposed to be on different networks - you no longer have a gateway single vmkernel - traffic will work as long as they are on the same subnet - a gateway is used only when you exit the subnet

  (3) I do not think it is possible to hide the local data store - but I could be wrong

• new to vmware - question

  Hi all, I'm new to VMWare and you want to ask a silly question. My project plans to use vmware on a single physical server running windows 2003 to implement multiple instances of servers windows 2003 virtual. My question is what do we need to have different IP address and host name for each server virtual windows? Or vmware manages to solve this problem itself? If so, how does this work?

  Thank you!

  lqin1983 wrote:

  guys, thanks for your reply... as you said, we need differernt IP addresses for each server, which makes it easy for us becase that means that we must go through a long process to the commission, the servers with the new ip address...

  If you had multiple physical servers, you will need to go through the same exact process. How many servers you plan giving each server an IP address is a big problem? VMWare removes just your need more physical servers, what you do with the guest computers is pretty much unchanged.

• New dialog box rule CSS not listed do not

  I use the Mac version of the program. Whenever I try to access the dialog box displayed new CSS rule, it never works. I think I can be absent a toolbar or something, because I searched the whole program for this feature and I can't find it. I've seen users highlight text and it appears, but it does not work for me either. I am trying to add a new class with a new selector name. help me find the box?

  CC comes with the new CSS Designer Panel.

  What do you use?

  http://www.Adobe.com/inspire/2013/06/CSS-designer.html

  http://TV.Adobe.com/watch/creative-cloud-for-Web/CSS-designer-indepth/

• Formatting question - CSS seems to be absent

  Hello

  I worked on my site a few weeks now, and in general what I'll do is use the preview in browser to see real changes in my coding and formatting. I must point out that the 'Live View' has never worked for me, because he always showed me the page without CSS.

  In general, when I click on Preview in the browser, it would encourage me... You want to save all the dependent files to the location of the source? and I would say Yes and Yes again. Then I would see the browser and more or less he showed me what was in fashion design.

  However, one day there, I noticed that the preview in the browser did not work, or I could see no prompt to save dependent files. I checked the site settings in the preferences and guests must be forthcoming. However, now, when an excerpt, it shows me only the HTML code and not the CSS.

  Does anyone have any ideas as to what could be produced?

  Now:

  http://imgur.com/FokOH

  View + what the preview of the browser used to display the design:

  http://imgur.com/5C3Fd

  Thank you!!!

  In general, when I click on Preview in the browser, it would encourage me... You want to save all the dependent files to the location of the source? and I would say Yes and Yes again. Then I would see the browser and more or less he showed me what was in fashion design.

  This will be possible only if you have not activated the preview using the files temporary option in PREFERENCES > Preview in browser.  Personally, I rarely leave this option no active, because I often want to get an overview of the UNSAVED work.  By enabling the option of temporary files, DW will create a new page on the fly in which:

  1. all root relative links are converted into links to document

  2. all linked external files are embedded in the head of the temporary file instead, including the CSS and js

  This seems much more convenient for me.

  Anyway, if DW does not request to register now, is it possible that you inadvertently checked this option (because by activating it, you no longer need to save your document to preview)?

  Of course, if the link to the CSS file is not correct, then no method should view a page in the correct format.

• Totally new with noob questions

  OK so im totally new to developing with Flex. My company uses flex to create RIA that work to read and write with SalesForce CRM. I use the salesforce toolkit and have an understanding of how everything works great base. what im trying to do is take the data which are entered in a text box and who present for salesforce. Currently, the first name, name and phone number are in the code. have created text boxes, I don't know how to take the value that is entered in one and make that equal to the value of its corresponding field.

  like I said... total noob

  If you are in ActionScript. FirstName = firstName.text should be fine, but in MXML and sometimes in ActionScript, you may need this:

  VAC. FirstName = "{firstName.text}.

  If this post has answered your question or helped, please mark it as such.

• All new phone lock question-restoration works not

  I just got a new phone and tried to erase the recovery mode because the device is picking up a random 6-digit and locking code. Unfortunately, it says that the device is not be restored. Is there anything else I can try?

  I do not understand what it means to 'clear the recovery mode '.  It could mean erase using recovery mode, or it may mean something quite opposite.

  In any case, try to use the procedure described in "Erase your device with the recovery mode" in the article of HT204306 you fixed above.  If this fails, contact Apple Support such as suggested in the "Get more help" section of this article.

• new apple tv questioned

  We just bought the new apple tv 4; have an apple tv 2.  What I want to save data or do something special before plugging a new apple tv 4?  Thank you very much

  There is nothing to transfer the Apple TV 2 to the Apple TV 4 If that's what you mean. You'll need to no password you used, but it's a matter of just go in them rather than transfer them somehow.

• New on windows - question about installations of update failed

  I am new to Windows, but recently purchased a netbook with Windows 7. I also installed Norton Internet Security.  I do not use the netbook every day, so every time I restart, I ensure that I update Windows and Norton.  Today, I watched the history of update and discovered that some elements did not install on other occasions. I don't know whether to worry about this or not.  If the elements have failed to install, say, two weeks ago, Windows Update would not try to install them again when I ran the update engine then?  I have received no notification on this topic - I just noticed this by looking at the history of update.

  While some of the elements initially appear in history as 'impossible' later appear as "successful", I can't find two articles among the facilities of 'success'  They are:

  (1) definition update for Windows Defender - KB915597 (. 1.79.702.0) and

  (2) definition update for Windows Defender - KB915597 (1.75.377.0.)

  Since the date where these two updates could not be installed, there are several successful installations of security for Windows upgrades and updates security cumulative for Internet project.

  I am now, I was wondering if the above is not updates of definition for Defender could have been included in the broader future updates.  Or should I still worry that these two items do not have install and try to do it manually?

  Thank you very much for your help!

  If you use Norton 360, please turn off windows Defender. If the Defender and norton are running, your system can know the performance degradation and other problems caused by the conflict of two services providing real-time protection at the same time.

  It is very important to update the virus definitions regularly. Otherwise you will not be protected against the latest threats

  Swede08, Norton 360 provides complete protection. However for a home user, I won't recommend that Norton 360 or other paid antivirus solutions

  You can use Microsoft security essentials. Its free of cost. Its your choice and depends on you and what kind of protection you need

  I hope the above information helps you

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New Member - easy question

  Hello, new Member...

  Is the battery in the user Aspire ES1-511-C59V replaceable?  I'm looking for a portable base with this option - it looks that good number of the newer units no longer have this option...

  Thank you

  Thank you!