New replacement of the 4250SX model

Similar Questions

• A small question about the replacement of the DVD in a HP Pavilion dv6 - 2057cl

  I need to replace the DVD drive in this dv6, and I wonder if there is room for manoeuvre with regard to the replacement drive.  Can I use another drive to disc HP with a similar model # or am I limited on drive 'identical '?

  Some quick info follows:

  OS = Windows 7 home premieum (32 bit)

  The disk removed from the laptop:

  DVD Super Multi writer

  MODEL: GT20L

  FW: DC05

  HW: A2

  TYPE: AMCK702

  CT: 7AXVK012GY3NRY

  HP mPC REF: 461646-6 c 2

  S/N:
  {Removed privacy}

  MANUFACTURED: OCTOBER 2008

  I found a replacement with the same 'model' and even 'HP mPC PN' but it was made in 2009, and I don't know whether or not the implementation of the SATA connection on the rear of the car fits.

  Any help is very appreciated!

  Thank you

  DaFlash

  It seems that the reference is the same. As long as the part number is the same, it is essentially the same part and should work without any problems. The only time where this part can fail if the part number is different. If a part is different from another part (software, hardware, etc.), it will have a different reference number. Also long that 461646-6 c 2 is identical on both, there is no problem with the disk replacement.

• How can I combine all pages of the site to a new page of the site?

  Hello

  I use Dreamweaver cs4 on a windows pc. I have 12 pages of my site with a spry vertical navigation bar. Whenever I create a new page I then add that to the spry navigation bar. All other pages do not show this new page in the navigation bar. Thus, the spry NAV. must be site wide update. Is it possible to update the spry navigation bar site wide in a few clicks? Is there an easy way of all the other page a link to this new page? I have a rendering template, but all pages on my site are now detached from this model. Whenever I saved the template in an html file to create a new page in the navigation bar was the word inside template, so I just deleted it out of the code. As you can probably I'm pretty new to dreamweaver so any help will be greatly appreciated to say the least. I checked everywhere wherever I can think of for the answer

  Thank you for taking the time to help, dluthier

  Is it possible to update the spry navigation bar site wide in a few clicks? Is there an easy way of all the other page a link to this new page?

  Yes, there are ways to have all the pages to be updated when you make changes to a navigation bar.  However, the way you describe the situation you currently do it all manually.

  The easiest way to update a navigation bar:

  1. the use of serverside includes: this is a basic tutorial explaining what is a SSI and how it's done.

  http://bignosebird.com/SSI.shtml

  2. the other is the use of models - that you tried.

  I have a rendering template, but all pages on my site are now detached from this model. Whenever I saved the template to a file html to create a new page in the navigation bar was the word inside template, so I just deleted it out of the code

  That's where you went wrong, you save the template with a new name, and save it as an html file.  You must use: Create New > model.  This way, you create a new page of the master model and save it in the root of your site - and this is what is called a "page of the child".

  Using DW templates:

  http://www.Adobe.com/devnet/Dreamweaver/templates.html

  The differences between the use of SSIs and DWTs (template file):

  With a SSI file, you make changes to the file and all the pages, the inclusion of which will update automatically and you need only download a SSI whenever you make a page.

  If you use a model, whenever you make a change, once again all children pages are updated, but you need to download * all * changed pages.

  I hope this helps.

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  http://Twitter.com/nadiap

  --------------------------------------------------

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  http://csstemplates.com.au/

• Change to the underlying model does not update display AdvancedDataGrid

  I'm working on a project of Cairngorm MVC. A part of the application has an AdvancedDataGrid ("ADG") with two levels of available drilling - we will call the highest level 'States' and the 'cities' of second level. The default is 'States' only - the top-level nodes are closed. When I add a new 'State' to the underlying model, it appears correctly in the ADG. However, when I add a new 'city' to the 'State' that has been created, the open node icon is not displayed, even if the data is there. I know that the data is there, because when I click to open another node, the icon appears suddenly to the top-level node, that I just created. I can't understand why this is happening or how to fix it. I need to open the node icon to display when I add a child to it.
  
  I tried the validateNow() and invalidateDisplayList() on the ADG methods, but they do nothing...
  
  Please make suggestions.

  have you tried invalidateList?

• Activation XP to replace the same brand and the motherboard model

  The PC in question had an OEM of XP without CD installation.  I have a good COA sticker. I've had damage to the motherboard as a result of a power of 250 BestTec supply failure. After a new PSU, I replaced the motherboard with exactly the same brand and model was original.  This was done in good faith, based on KB824125 which States that this should not need a new license.   However, now I can not find a way forward so that Microsoft "reactivate".   How can I get the activation?

  Additional details:

  All the files on the hard drive are OK, including Windows XP. The BIOS works fine.

  When I try to start Windows, he says that activation is required.  Activation of the Internet requires Windows, so that leaves me with activation by telephone.  50-digit ID is reported as invalid, and the automated system hang up.

  KB824125 seems to fix my problem and specifically says: "If the motherboard is replaced due to a fault, the user doesn't have to acquire a new license of operating system of the computer. The replacement of the motherboard must be the same brand and model or [options]. "There is no statement as to how to apply it.

  When I go to eMachines, they indicate very correctly the warranty is over and ask that I go to the web site of the software publisher.

  When I called Microsoft, I am led down an automated tree that ends with the possibility of buying support.

  I fixed the PC, and now my software appears as illegal.  Can someone tell me which way in the maze will solve this problem?

  I'd be happy to send the old motherboard to Microsoft, if that's their problem.

  "BobL39" wrote in message News: e27a096a-1b58-4647-8c9d-98e9e0111b65...

  The PC in question had an OEM of XP without CD installation.  I have a good COA sticker. I've had damage to the motherboard as a result of a power of 250 BestTec supply failure. After a new PSU, I replaced the motherboard with exactly the same brand and model was original.  This was done in good faith, based on KB824125 which States that this should not need a new license.   However, now I can not find a way forward so that Microsoft "reactivate".   How can I get the activation?

  Additional details:

  All the files on the hard drive are OK, including Windows XP. The BIOS works fine.

  When I try to start Windows, he says that activation is required.  Activation of the Internet requires Windows, so that leaves me with activation by telephone.  50-digit ID is reported as invalid, and the automated system hang up.

  KB824125 seems to fix my problem and specifically says: "If the motherboard is replaced due to a fault, the user doesn't have to acquire a new license of operating system of the computer. The replacement of the motherboard must be the same brand and model or [options]. "There is no statement as to how to apply it.

  When I go to eMachines, they indicate very correctly the warranty is over and ask that I go to the web site of the software publisher.

  When I called Microsoft, I am led down an automated tree that ends with the possibility of buying support.

  I fixed the PC, and now my software appears as illegal.  Can someone tell me which way in the maze will solve this problem?

  I'd be happy to send the old motherboard to Microsoft, if that's their problem.

  You can try the phone activation - this time, when the automated system asks you what service you need, do NOT - this should oblige the operator to pick up. They will help you.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Will I get my current phone, replaced by a new phone, because the iPhone 6 is interrupted?

  Hi, I ask this question because I wonder if Apple will replace my phone with a new phone, or if they will just replace an iPhone 6, because my phone has completely stopped working. I know it's a stupid question, but I'm asking you this, so I know what Apple will do.

  They will almost certainly replace it with another iPhone 6; they usually have replacements on the spot, but nobody on these cards can say with certainty. In case they are not, you will get a more recent version.

  (144680)

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• HP deskjet 656c what replacement of the ink cartridges can be used in this model?

  Hi all

  This is my first time here so please bare with me!

  I have a hp deskjet 656c printer that accepts ink color cartridge n ° 49 (hp51649n 11ml) and

  black ink cartridge (c6614n 14ml hp) no.20.  I tried several shops and can't locate

  These at all. Can someone please tell me if these special cartridges are still available or if they

  have been replaced by another numbered canister.

  I had checked the lists of products, but those listed was an additional letter after the "n" of the cartridge

  number and the cartridges that I don't. I can't afford a new printer at the moment so if

  Anyone know where to buy these cartridges or alternative, your help in this matter

  It would be appreciated.

  Thank you very much in anticipation.

  Concerning

  vse19

  The Site of HP SureSupply here lists the following references (to the United States, check the SureSupply site if you are located elsewhere.  The cartridges will be available by mail order from HP or other provider, if you cannot find them in local stores.

  The letters after the part number are generally not important, they indicate areas.

   

• I need a new key for re install on a different motherboard, which is the same model?

  I currently I have Windows 7 Home Premium OEM installed on the computer, recently built, but have had problems with it because of a faulty motherboard, so I wonder if I can re install without problems, or if I need a new key because it it a different motherboard. The motherboard is an ASUS P8Z77 - V Pro. If I do not need a new key from Microsoft will be able to provide me with one, since it's just a computer, and I'm simply by changing a defective part?

  If it's a faulty motherboard, in such circumstances, you could try phone activation whenever you use a motherboard of the same model.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• can you replace the motherboard of dv7 1232nr in the new motherboard supporting the i3, i5 or i7?

  Hello all can help me please

  I have a laptop dv7 1232nr and I have questions on the processor because it is only a dual core im thinking and the replacement of the motherboard that supports anygeneration of i3, i5, or i7 from intel

  is this possible? also, including the video card?

  If there is can you please help me...

  Thank you

  Hello

  My suggestion: buy a new machine because add them, cost more than buying a new machine itself and the result of may will not be big, UNLESS you are having another machine and use this machine for experimentation.

  Kind regards.

• I had photoshop elements 13 on another computer that has been recovered by Microsoft and replaced by the new. How can I remove the serial number of a computer that no longer exists?

  I had photoshop elements 13 on another computer that has been recovered by Microsoft and replaced by the new. How can I remove the serial number of a computer that no longer exists?

  You are allowed to activate the software on two computers. If this is your second installation on the new machine, the software should assign without problem.

• Illustrator CC 2014 stops working when I click NEW, AGAIN from THE MODEL or OPEN.

  Illustrator CC 2014 stops working when I click NEW, AGAIN from THE MODEL or OPEN.  I tried to uninstall and reinstall; I also tried to disable the graphics card.  Help, please!

  Problem solved.  It was a mistake of the printer at the origin of the problem.

• After its replacement by the new AM a LOV in the standard page stopped work (R12)

  I spread an AM in one of the standard Oracle applications Page. After its replacement by the new AM, a LOV in the standard page no longer works.
  Do anyone have a solution for this?
  
  Thank you
  Lou

  1. you can move this code to the controller.

  2. While doing the extension must also worry about the maintainability of the code.

  3. If you do not add this to the CO, create a new AM, specify this AM to a region on your page, now it will become nested AM.

  4. you can code for call PLSQL in this new AM.

  5. you can access this CO AM and call this method.

  I recommend to call the PLSQL Co.

  -Prince
  http://princekapoor82.blogspot.com

• model background image disappears when I make a new page of the model

  I have a background image in my container in my model.  When I make a new file based on this model, the background image disappears.  No idea why?

  Open your child page in code view.

  Correct the path to your background image manually as described in my previous post.  Record.  Preview in the browser.

  This aid?

  Nancy O.

• Why mozilla firefox options synchronization replaces all the new password old password?

  When I sign in account twitter, linkedin, facebook and yahoo all sites informs me that you used your old password? I have change my password all the old almost 5 months before and after 5 months I used Firefox sync my new bookmarks update option, new name of connection sites and new passwords as well, but after that the sync option used, my new password replaced with the old password

  Maybe the 5 month period when this laptop principal was not connected to the Sync had a role to play in your problem. Sync is designed to synchronize Firefox data permanently, not to be started when you want to "data backup", as with a Cloud Computing service. And the password / feature connections has been changed just about this time, I remember well, then maybe who had a role to play in this last issue.

  1. my advice is to unplug all devices sync. 2. then, using computer laptop main with your latest data, reset your synchronization password. Will erase your data from the server, so you can get a fresh load of data to synchronize, and then to other devices when you connect again with the new password. 3 reconnect the computer main sync using the new password. 4. the next day reconnect another device using the new password. Check that connections data is now suitable for this device. 5. If it looks good, plug other devices one by one at a time by using the new password. And if you are using a "mobile version" of Firefox [Firefox for Android or Firefox for iOS] I would wait a few days to make sure that your data on the desktop / computer portable devices is good before you plug one of these devices.