New: Storage of synchronization failed

Similar Questions

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

   

• PSE7 backup/synchronization fails

  Hello

  Backup/sync no longer works on my PSE7 catalog. I used it for over a year, it has just started this month. I have some new pictures to download, and a bunch that just need to synchronize again due to a minor change (I renamed the Windows folder, they are stored in).

  When I run PSE7, backup/synchronization starts. After about 20 minutes, he died. Icon (two arrows) element becomes black. No images synchronize or transfer during this period. Icon in the toolbar State Windows sys goes.

  What backup/synchronization starts, I can see in the Manager of tasks as PhotoshopElementsSyncAgent.exe

  PhotoshopElementsFileAgent.exe are running. Once it dies after about 20 minutes, the PhotoshopElementsSyncAgent.exe stops running.

  I bought a 40 GB of storage on photoshop.com, and I used 32GB.

  I fixed, indexed, optimized my catalog.

  I uninstalled Photoshop Elements and reinstalled

  Photshop.com, I can use Photoshop Express to upload a photo in my library

  I created a new catalog and uploaded a few photos without any problems, so it must be a problem with my catalog or synch db?

  I don't get any messages about warnings or conflicts.

  I'm in PSE 7 on Windows Vista SP2. I downloaded and installed the patch 703. Now when I select "check for Updates" I get a message that there are updates available. However, when the process starts, it stops and then said "there is no update available."

  I checked my diary of synchronization, and it says there are errors. The first section says:

  Info [20101024T 092858] : SyncEngineCore:Sync Init: sleep between synchronization cycles [300] seconds

  Info [20101024T 092858] : SyncEngineCore: starting the new Cycle of synchronization...

  Info [20101024T 092858] : AmocParticipant: initialized database sync

  Error [20101024T 092858] : error initializing error staus EMSParticipant:Database: 32

  [20101024T 092858] Debug : EMSParticipant: unplug error checking

  Info [20101024T 092858] : SyncEngineCore: checking disconnect timeout: timeout is::7200 min

  Error [20101024T 092858] : error initializing error staus EMSParticipant:Database: 4

  Error [20101024T 092858] : SyncEngineCore:Error notification of synchronization error timeout.

  Error [20101024T 092858] : error initializing error staus EMSParticipant:Database: 2

  Error [20101024T 092858] : error initializing error staus EMSParticipant:Database: 128

  Error [20101024T 092858] : error initializing error staus EMSParticipant:Database: 256

  Error [20101024T 092858] : error initializing error staus EMSParticipant:Database: 64

  Info [20101024T 092859] : SyncSystemTray:Network change detected: connected

  Error [20101024T 092859] : error initializing error staus EMSParticipant:Database: 8

  Info [20101024T 092859] : EMSParticipant:EMS user account [[email protected]] LOGIN succeeded!

  Info [20101024T 092859] : EMSParticipant:Sleep between synchronization cycles the value [600] seconds

  [20101024T 092859] Debug : AmocParticipant: fixing amoc catalog

  ...

  The last section says:

  Info [20101024T 093725] : EMSParticipant:Time set off to find the tag info EMS: 35257 milliseconds

  [20101024T 093725] Debug : EMSParticipant: getting the tag changes side EMS!

  Info [20101024T 093728] : EMSParticipant:Time up calculation of the ems changes side tag: 2854 milliseconds

  [20101024T 093728] Debug : EMSParticipant: getting the tag changes side EMS DONE! Count: 138

  [20101024T 093728] Debug : EMSParticipant: getting the media changes side EMS!

  [20101024T 095356] Debug : EMSParticipant: had full Active Server list...

  Error [20101024T 095359] : SyncEngineCore:Unknown Faliure, abandoning Loop Sync...

  Info [20101024T 095359] : SyncEngineCore: post of Message Quit to the main Thread.

  Help please!

  Thank you. We got the syncdb. A technical support person will work with you to resolve it.

• Synchronization fails when password synchronization is enabled

  Using Firefox on Arch Linux (same number on 8 Debian), synchronization fails systematically when password synchronization is enabled. I reduced to a few passwords, sync works fine if password synchronization is disabled. I did a master password, and I do not have locally stored passwords.

  Your list of extensions in the system detail list shows the "GNOME keyring password integration" extension, so I guess that this extension is the cause of your problem and the extension is not compatible with sync.
  You could test that by disabling this extension.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Unit - mailbox moved to the new storage group is not available

  Hello

  I have a 4.0 (4) unit UM with a message from Exchange 2003 offbox store. During the initial installation, only the first storage group on the mail server was present and mailboxes of the users are hosted here.

  Recently, a new storage group was created on the mail server and a mailbox has been moved from the first group of storage to the new storage group. The Subscriber is able to receive voice messages via e-mail, however his MWI does not illuminate. When it tries to connect to retrieve messages on his phone, the unit said "your messages are not available now.

  I am able to create or import users that are hosted in the new storage group, but I'm having the same symptoms. Is it necessary to rerun the configuration of message store wizard?

  Thanks in advance.

  Have you run Assistant permission for the new Bank of mailboxes?

  The other thing to do is to restart the AvMsgStoreMonitor service; But wait after hours. A reboot will do the same.

• How to create the new storage pool?

  Hello.
  I am running windows 8 and I wanted to create a new storage pool for my personal files. but how?

  I have only 500 GB of storage.

  current storage pools:

  OS (C :) - 460 + GB)

  Lenovo (d) - 20 + GB

  Thank you!

  Hi Jerome,

  Yes, the statement means that you can use an external drive such as a hard drive or a USB drive as a storage drive. What you need to do is plug in the hard drive, go to start screen, type storage, click on manage storage. Click on create a new pool and storage space , and then follow the instructions on the screen (as shown on the link provided on the previous answer).

  Alternatively, you can also create a new partition of the hard disk volume. You mentioned that the operating system drive is 460 GB and drive "D" takes 20 GB (or more). What we can do is to create a new simple volume on the unallocated disk. If there is a disk unallocated space, we will create a new disk by taking the amount of disk space required on the unallocated disk space, and then use the new disk in what concerns your personal files.

  First of all, check if there is a disk not allocated/available in disk management. Follow these steps:

  • Press Windows + X , and then select Disk Management.
  • Check if there is a disk unallocated with readers. If you do not have a disk unallocated, then right-click on the drive (the operating system or drive "D") and select Volume Shrink.
  • Now, you'll find a disk unallocated in the lists. Click on a region unallocated hard disk, and then click New Simple Volume.

  • In the New Simple Volume Wizard, click Next.

  • Type the size of the volume you want to create in megabytes (MB) or accept the maximum default size, and then click Next.

  • Accept the default drive letter or choose a different drive letter to identify the partition, and then click on Next.

  • In the dialog box Formater Partition to format the volume with the default settings, click Next.

  • Review your choices and then click Finish.

  • Now a new drive will be created and it will be displayed in the file Explorer.

  Check if it solves the problem.

  For reference:

  http://Windows.Microsoft.com/en-CA/Windows/REPARTITION-hard-disk#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows/create-format-hard-disk-partition#create-format-hard-disk-partition=Windows-7

  Please keep us informed on the issue.

• Problem with adding new storage to the CDV provider profile

  Hi all

  I have problem with adding new storage to the CDV provider profile.

  My ENV:

  VCD Version 5.5 latest

  vCenter 5.5

  VCDDB - SQL

  I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

  I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

  I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

  What I'm trying:

  1 Refresh the storage via the VCD (right click on the attached vCenter) profile

  2. restart the inventory and the profile based on the vCenter servers

  3. restart the VCD and vCenter servers

  Help, please

  You can just follow KB 2075366.

• Get the message "the Outlook calendar synchronization failed".

  I hope someone can help. When I sync, the hotsync log gives me the following information. Everything syncs fine except used to synchronize the calendar. The message is not to give me some info on why it won't sync (except maybe the words 'Recovery Sync' - do not know why it is said that). I had a Palm for years and never had this problem. All started a week ago. I have a Tungsten E and use Windows XP. Thanks in advance to anyone who can help!

  HotSync operation began on 23/10/08 14:45:28
  Outlook calendar
  -Recovery Sync
  Outlook calendar synchronization failed
  Outlook contacts
  -Fast Sync
  OK Outlook contacts
  Outlook tasks
  -Fast Sync
  OK Outlook tasks
  Outlook notes
  -Fast Sync
  OK Outlook notes
  Outlook calendar
  -Do nothing
  OK Outlook calendar
  Outlook address book
  -Do nothing
  Address Book Outlook OK
  Prospects to do list
  -Do nothing
  OK Outlook to do list
  Block-memo Outlook
  -Do nothing
  Block-memo Outlook OK
  Charges - sync configured to do nothing
  Notepad OK
  VersaMail - Sync configured in a way nothing do
  Documents To Go OK
  -Backup db preferences saved in the file C:\Program Files\Palm\Linda\Backup\Saved_Preferences.PRC
  System OK
  HotSync operation ends 23-10-08 14:45:34

  Strange, well regardless of what version you have you need to update the current version of Palm Desktop. Go here http://www.palm.com/us/support/downloads/windesk414e.html download and install this version. Once done try to synchronize. If you have problems with this return ticket.

  Message is about: Treo 800w (Sprint)

• How to move VMS to new storage AND new hosts

  Hello

  I'm having a hard time find, how can I move all the VMS NFS storage to a new storage iscsi (SAN HP). We are also the introduction of new material for guests, so throughout that this is an entirely new environment of vCenter (also from vSphere 4.1 to 5.5). My first thought was to attach new storage to the old hosts. Then do a migration of storage, one for a while (off voltage machines), remove the virtual machine from the old vCenter and then add them to the new environment of vCenter. But we have exhausted all NICs on the hosts of old, so I can't join the new storage, and I can't share a vmkernel for iscsi and nfs port.

  You have any suggestions how I can address the issue?

  It would work if you are very good to have downtime to your virtual machine.

  If you incur no downtime, you can try to install the same set of ESX (i) version on a few new series of servers (for example 10 points on 50 new servers) and add them to the old CR and proceed step by step below

  -Configure the old NFS storage on new set of servers

  -Migrate (vMotion) all VMS on old NFS to the new set of servers

  -Remove all the new set of VC servers

  -Add the same set of servers (that have been migrated from VM) to new VC

  -Migrate all virtual machines to the new storage and then upgrade your new set of servers

  In my view, this way you can avoid having a downtime for your virtual machine.

• Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code of 50

  Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code 50.

  Hi Gregory,

  Please refer to the threads below to resolve the error code 50:

  Which is updated CC 50 error Code?

  Setup error - code error 50 creative cloud.

  You can also try to download the app from the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  * Be sure to read the important Instructions before downloading *.

  Kind regards

  Sheena

• IVMS with new storage

  We recently had our Netapp upgrades to a 2240 and I'm having a problem to recognize the backup storage.  I can find and see the new storage, but when I go to backup and try to set up a job there is no storage data appears.  Can someone help me on the mound?  Thank you.

  Make sure that your using the latest version of the IVMS, which is now called VSC. The version im using is 4.0, but there may be a slightly newer version.

  You must make sure of the spin (or vFilers so your help Multistore) are routable on the server where you installed VSC (could be vCenter or a standalone machine).

  You "add" your "vcenter server" and the "controller of storage/s" in backup and restore (see the example of the window below)

  

  Note, you must also add your "(/ s) storage controller" in other menus, as "monitoring and Host configuration" see example below. "

  

  Its a little annoying how we configure vCenter and controller details in several places, but other than that, VSC is excellent.

  Hope that helps.

• vmmark2 - error - time synchronization failed start/finish

  vmmark2 - error - time synchronization failed start/finish returned RC = 10002, System Error 1326 unknown or wrong password username.

  I provided the correct credentials to connect to the VCserver.  Not sure why she's enclosure.

  Is the VC server credentials or the credentials of vcenter?  These two don't with the same error.

  Without a NTP server, you will need to manually synchronize things to the top and make sure that they don't automatically readjust their time.  Review the TimeChecks.txt file that is generated when executing.  This will tell you how far the individual systems are.  Each system must be within 60 seconds of the first customer.

• Migration from the old to the new storage box

  O/s - AIX
  Present Storage - storage IBM XIV
  New storage - HP EVA 8400
  
  We intend to migrate from old storage to the new storage box. Here's the oracle servers.
  storage team and AIX o/s teams will migrate data from the old to the new storage box storage box. (step of migration include - backup of volumes of the o/s and even restore in new storage box).
  
  WHAT SHOULD DO ORACLE DBA, RECOMMEND SO THAT OUR ORACLE DATABASE SHOULD WORK JUST FINE ON THE NEW STORAGE SYSTEM? Please share your entries?
  
  My hypothesis: The o/s team as AIX will be due work migration preferred to be a s/n, we need not do binary oracle / oracle data files will be the same migrate to new storage box as it is. We being ORACLE DBA should simply ensure that we should have our oracle databases registered with us architecture.
  
  All Suggestions, questions are welcome, thank you friends.

  Yet once if administrators can make the local hard drive appear identical to the operating system when the contents of the disc is moved to the new storage unit you should not have to do anything. If the local drive cannot make it appear exactly the same that I would probably want to re - install Oracle and patch then just start my database to the newly built House. The note of Oracle on cloning Oracle Home can present a different option.

  It would be nice if this process has been run on a test server before production, because according to your window, you don't want to build a new House of Oracle after the migration to disk. I would like the House to be brought as part of the file movement or I would create before it is tested and ready.

  HTH - Mark D Powell.

• Mobile tables to new storage spaces

  Hello
  
  If the database is to climb up or down by moving the tables to new storage spaces in EBS

  Salvation;

  Please see:
  Note: 147356.1 - how to pass arrays of one Tablespace to another
  Note: 158162.1 - how to move all the Tables a user to a different Tablespace
  Note: 151588.1 - how to reorganize a table

  See also:
  Re: How to move a table to the other schema

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• Migration to new storage ASM

  Oracle 11G R2 RAC with ASM on Solaris 10
  
  Just do my due diligence to prepare material migration of storage of StorageTek (RAID 5) for NetApp (RAID 6) with more space
  
  Anyone has any experience of migration to new hardware for storage with different RAID types when you use ASM? I guess there is no problem of hardware compatibility. Is it possible to connect the new storage to the servers and create new ASM disks groups, move data to the new disk groups files and then remove the old storage? Or should I take a RMAN backup and then restore it on the new storage?

  Yes, but remember that you don't want to leave all as unpaired LUN in the same diskgroup permanently, as ASM blindly assumes that all LUNS have the same capabilities and balances Allocation units (AUs) is based on this assumption.

  If you break rebalance ASM, add a lot of new LUNS in an existing diskgroup and mark all old LUNS to fall once evacuated, then resume the rebalancing, the end result will be all new LUNS that are all also hitched. Just by adding a few new LUNS leaving some old would produce suboptimal performance.

  If you go to the approach of separate ASM diskgroup, you have the luxury to migrate your files (if desired) iteratively given ASM manages two independent disk groups.

  Don't forget to assign points if you find my answers to be useful and accurate.

  Thank you very much
  Bryan Wood