Synchronization fails when password synchronization is enabled

Similar Questions

• Remote Desktop connection fails when the firewall is enabled.

  Trying to install Windows 7 Ultimate to allow the desktop remotely from a Windows Phone 8.1.

  I have lived this guide allow remote connections to install Win 7 PC. The configuration of the connection I want is only for the local home network.  In the firewall settings 'allow through firewall programs' Remote Desktop - RemoteFX is checked for audiences and home networks.

  If I disable the firewall of home network the phone connects easily and will control the PC.

  With firewall switched network phone will not connect and gives an error code 0 x 204. There is no notification of the computer, the firewall blocks a program.

  I just that it works with the firewall of network power.

  Hello Garym,

  Welcome to Microsoft Community forum.

  I suggest that you go through the information provided in the following MSDN blog and see if it helps.

  Remote Desktop Services blog

  To get help, I suggest you to post your query on TechNet Forums that the query you posted is more complex that can be answered on the community forum. The link is provided below.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Current solution: download IE8 for XP, run who, follow the Setup Wizard, wait for his failure. Download manually upgrade restart, recommended.

  Restart the installation of IE8, wait that he remove previous IE. Reset.

  Installation of IE8 restart to restart. Let it run. May need to restart.

  Try to run windows update again. IF it works, woot, otherwise download the SP3 of XP service pack from Microsoft. As the Windows update fails, you must not download an installer, but an ISO standard. Burn the ISO to a CD and install (way to go...) or download a free tool like 7Zip and unpack iso and install a go from there.

  From there on, the installation of SP3 and hope this works...

• Profiles of DRM fails when creating EPMA Interface

  Hello

  DRM getting authentication failed when creating profiles of EPMA.

  I tried several times but his failure to get. do I need to do something in DRM. Please some guide.

  Hello

  Please follow him below the steps and, hopefully, this should solve your problem

  1. connect to the DRM application server.

  2. launch the DRM configuration console

  3. click on the Application to change

  4. on the register EPM tab, click the button cancel the registration.

  5. in the identification information section change of user name and password for the correct credentials (as a general rule, the user is epm_admin)

  6. click on the button Save

  7. Enter the credentials of the user CSS (as a general rule, the user is epm_admin)

  8. click on Save Configuration

  9 restart DRM Services

  10. try to create an import profile in EPMA

  Thank you

  ~ KKT ~.

• 38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.

  38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.

  Thank you. I could sign G-mail in Mode safe, so I "refreshed" Firefox and that took care of him. Appreciate your quick response and helpful instructions.

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  Hello all

  I am using a modulated signal to labview created pulse width (square wave) to control when a signal is activated or not.

  Here is my logic and a concrete example:
  (1) the wave source signal is continuous
  (2) use a PWM (square wave) created in labview to control when the signal is enabled or disabled
  (3) if the PWM (amplitude) signal is superior to 0 play signal PWM is not greater than 0 do not play signal.

  I use actually this to the sequence step / pulse several distinct magnetic coils using my audio card (which has several channels of audio output), I have a signal in labview played constantly.  As to compare it to the PWM (square wave) which controls whether or not the signal is played on each separate channel.  That way I can control which coil is on and offshore and in what order they are activated.

  I couldn't find an edge detection for a square wave created in labview, so I tried the limits, but it doesn't seem to work unless I change the phase manually and it only goes 1-1.  I'm just trying to compare the PWM (edges of the square wave) already created by labview / play a signal if the pulse is greater than 0 and it shuts off the signal, if she is less than 0.

  Should I do this another way

  TIA

  A waveform contains an array of values. You must check every value and respond accordingly:

  

• When I turn the windows firewall of it says that I have no firewall when avasts firewall is enabled

  original title: firewall

  I activated the windows firewall and I have avast internet sercurity silent firewall but when I turn windows firewall it says I have no firewall when avasts firewall is enabled is it ok if I let both on

  Do not use two firewalls at the same time. An exception would be a router with a built-in firewall and a normal firewall.

• Error message: "the server has failed", when you try to download "sp1aexpress_usa".

  Original title: "Server failed" when it tries to connect to / download "http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a".

  I downloaded the file "sp1aexpress_usa", but when it works, I am getting error "Server failed" when it tries to connect to / download "http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a".

  Hi JasonVigh,

  You can check the link for redownload SP1a and check if you can install it:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=19751

  For more information, see the links:

  How to get Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  You can also check the links of thread for more information:

  Impossible to connect sp1aexpress_usa.exe (Windows XP sp1a), get the error the server has not responded

  Failed to load Service Pack 1

• "Connection error. Check the Internet connection. "When you try to enable Web Services on HP 1606dn

  Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.

  Operating system: Windows 7

  Thanks for the help,

  Howard

  Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw

  Thanks for trying to help.

  In my case, it did not help.

  I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.

  The key was the update of the firmware, I think.

  Walter

• Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.

  Dear Sir.

  Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.

  OS: Win XP Prof

  Bluetooth device: Widcomm connected to the desktop computer

  Thank you & best regards

  Magali U

  Hey Ma U,.

  Follow the steps in the article.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

• Error - installation failed when trying to open AVG Antivirus and internet options will not open.

  Original title: I need help to fix my 'internet options' in the control panel.

  THiiS is a recent problem and I don't know what may have caused it. I tried to install a new virus program to see if the problem was a virus or spyware. I have read that sometimes AVG will cause problems. But in order to install the new antivirus, I have to remove AVG... cannot do! It says "installation failed" when I try to open the long counter. There is therefore no uninstall program. I need to open my internet options in the control panel to start the process of fixing things. but it does not open. I can't download all the programs from my browser. In the lower right hand corner of my IE on the left 'internet' is a white box with a red X.

  UPDATE... I used my external CD/dvd drive and was able to copy the installation for firefox to a computer and put it on the shot, I have problems with. Hooray! success... Now, I have firefox and a navigation bar and was able to successfully download a program from the internet. Now, try to uninstall AVG... (how the hell uninstall something that says 'installation failed')

  Hi patriciashifflett,

  What version of Internet Explorer you have on your computer?

  Due to Internet Explorer, you can follow this link & check if the problem persists.

  Internet Explorer does not start or stops responding

  To remove AVG Anti-virus, you can download and run AVG remover which eliminate all parts of your installation of AVG on your computer, including the registry, system files, user files, etc.

  http://www.Avg.com/us-en/download-tools

  You can also download & install Microsoft Security Essentials on your machine.

  Hope the helps of information.
  Please post back and we do know.

• WRT610N v2 distribute IPs when wireless security is enabled

  I got my wrt610n v2 for several months and it has worked very well.  But today, something happened.  When I could not get an IP address on the wireless, I reset it.  That did not help.  So, I have connected from a wired computer and spent several hours debugging.  What I've discovered, is that when wireless security is enabled the DHCP wireless no longer works (ALL the wireless security).  If I turn off security, the instant connection of all wireless computers.  Turn it back on, all clients will try to connect, but get no IP address.  (Yes, the security settings on clients are correct).  I do not use the 5 GHz, only the 2.4 for B/G.  Here are some things I've tried:

  1. reset to factory settings.  No change.

  2 reinstalling firmware.  No change.

  3. all types of wireless security.  They do the same thing.  Once activated, no more IPs get handed out.

  4. different SSID. No effect.

  5. remove all wireless network PC and their implementation from scratch.  The problem is not with the customers.  All machines (more my phone) have the same problem.

  6. different wireless channels.

  Other notes:

  -The router is properly broadcast the SSID when activated.

  -It passes both the type of security.  My laptop win7 will correctly identify the type of security and request the appropriate key/expression/whatever whenever security is enabled.

  -J' had the same SSID and WPA phrase for years and used for several months with this router with no problems.  So I know that security is properly configured on all my machines.

  Any ideas?  Right now I have a non-secure network set in place and it works fine.

  Just thought I'd give an update.  A new router hooked up and got the same behavior.  So that it reduces... should be environmental.  Later I thought about it.  A neighbour had stolen my SSID but not broadcast it so I couldn't see it.  All my devices were getting confused.  Choose a new SSID and bam, fixed everything.   I was not even using a default SSID.  I'm guessing they were putting it router for the first time and just picked up something they had seen before.

  EDIT > I tried different SSID as solution before (see the original post), but that has not worked.  I think that I also need a different channel.

• Error message: MatsGetSapCatalogue failed when I try to log on to Fixit Center.

  Original title: MatsGetSapCatalogue failed

  Why do I receive the message > MatsGetSapCatalogue failed< when="" i="" try="" to="" log="" on="" to="" fixit="" center?="">

   

  Hi Malgaff,

  Since you get this message when you try to log on to Fixit Center, you can post your query on Microsoft Fix center for assistance.

  Microsoft Fix it Center

• Gamepad Xbox 360 for Windows pc freezing when the vibration is enabled

  Anyone know a fix for this, whenever I have the vibration turned on for any game using the controller Xbox 360 for Windows (by cable), it freezes the game and I can't get my PC to respond again by disconnecting the controller.

  This occurs if the game supports natively the 360 controller or not.

  Games question until now:

  Dead Space
  Dead Space 2
  LIMBO
  Tomb Raider: Legend

  Deactivation of the vibration in one of these games feature solves the problem, but does anyone know a solution where I'd be able to use the vibration?

  The problem you are experiencing may be caused by the power of the amount needed when the vibration is enabled. I had the problem on my old PC, that when I used my controller, my sound would play as the speakers had holes in them and that the game would freeze-freeze-start. The Xbox 360 controllers use 500mA, which is over the limit that provides a USB port. With this audio device, a keyboard and a mouse together via a USB port, which is an aspiration constant quite heavy on the USB supply rail.
  I fixed it by getting a small USB 7 port hub which is outwardly the power (this is important) and plug my controller. This way he can draw the entire, there need without slipping down the USB ports attached to the motherboard. Just be sure it's a hub with an external power supply.

  SC Tom