Tecra A2 - new drive HARD and have no idea of installing the drivers of Windows XP Home edition

Hi all, have not been here in a while...

Where should I start... Have Tecra A2 and the HARD drive died on this issue... was not able to recover whatever it's him so bought a new HARD drive.

Rather than taking it to a repair shop, I would like to re - install Windows XP myself, save money and have a clean install.

I know that I have to download the drivers from downloads for Tecra, but haven't a clue as to who and the most appropriate.
Could someone be so kind and point me in the right direction to get my operating system again?

Thank you.

I agree with you. Do clean install of Windows XP Home edition and install all the drivers, Toshiba tools and utilities following this order of installations:

Windows XP SP2
Chipsets Intel (r) software installation utility
Intel (r) 82852/82855 GM/GME Graphics Controller V6.14.10.3722
TOSHIBA common modules
TOSHIBA Hotkey Utility for display devices
SigmaTel Audio WDM Driver
ALPS Pointing-device Driver
TOSHIBA-button On / Off Utility
Launch and TOSHIBA Touch
TOSHIBA Software Modem SM2138ALD04
LAN driver
Atheros wireless network adapter
TOSHIBA Power Saver
TOSHIBA utilities
TOSHIBA console
TOSHIBA controls
TOSHIBA ConfigFree
TOSHIBA PC Diagnostic Tool
Driver DVD-RAM
CD/DVD Drive Acoustic Silencer
View of TOSHIBA for Ext.Monitor service

I hope that everything will be OK and you will be able to use Windows XP Home on your Tecra again.
If you have any other questions please let us know.

Good luck!

Tags: Toshiba

Similar Questions

  • Satellite X 200 and the drivers of Windows XP Home edition

    Hello

    This is my first post in the forum of Toshiba.
    I would like to ask if someone has successfully installed the windows xp operating system in the 200 X-
    with the support of pilots complete ex:
    NVIDIA graphics drivers all other question yellow marks appears in Device Manager.
    If Yes can post a link to download drivers Toshiba download driver page doesnâ because? t support NVIDIA graphics drivers and other drivers for Windows XP Home edition.

    Thank you very much
    Sorry for my bad English.

    Take a look at the post Johnny s!

  • Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.

    Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.  I downloaded the Microsoft exFAT driver (Windows XP-KB985704 - x 86 - ENU.exe) and installed XP Service Pack 3.  However, when I turned the computer off and restart it, the disc will install.  I'm having this problem with several readers.  Looks like the player trying to get (new Windows hardware sound chimes when you plug in the drive).  Then rapidly thereafter dismantle it quickly sounded. When I take the car and plug it into my Mac, it is still rising.  Is it possible that I have to do something more to install the Microsoft exFAT driver?  The drive is made by G-technology.  I also tried to remove the disc before you turn off the computer and turn off the computer with the mounted drive yet.  Whatever it is, the reader is not recognized when I restart the computer.  I ran an on the disks and sometimes Apple disk utility, I get the message that the reader has a cluster to run repair disk.  After that, the player either go up or not.  There is no virus on the Windows computer.  The operating system is a novelty.  I use the system only to run AVID.   No other software is on the computer other than what came with it.  The computer is a HP 8600 workstation.  I mount the drive through a port firewire 400 on the computer using firewire 400 to 800 cable G technology.

    Hi motionpicturedirector,

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click on Start , then run.

    (b) type msconfig , and then click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    (d) when you are prompted, click restart to restart the computer.

  • I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

    Question
    I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

    To open the window to customize the toolbar, do one of the following:

    • Firefox button > Options > toolbars
    • Press ALT or F10 to temporarily show the Menu bar and choose from there (view > toolbars > customize)
    • Hold DOWN the ALT key while pressing the VTC keyboard letters

    See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36

    Regarding the new button tab, you see the end a '+' after the last tab or the right of the tab bar? This is the icon of the new tab.

    • CTRL + T will open a new tab

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Windows is config not download and install the drivers on windows 7

    Original title: USING WINDOWS UPDATE

    Windows is config not download and install the drivers on windows 7 please help.

    [Tip] Customize the Installation of the driver software from Windows Update device

    hope that helps.

  • New drive HARD and OS upgrade on Equium A210

    I want to install a new SATA hard drive more and also upgrade from Vista to Windows 7 is only a problem at all and that I can use a normal Windows 7 disc.

    Hello

    Generally avoid any problem with drive HARD and OS upgrade. If you want to have the exact answer please let us know what model of laptop you have.

  • Where can I find the full list of the features of Windows XP Home Edition and Windows XP Professional

    Could you please direct me to the Microsoft Documents where I can find detailed specifications and characteristics of the two operating systems:

    (1) Windows XP Home Edition

    (2) Windows XP Professional Edition

    Thank you

    Hello Roman

    Thanks for the clarification on the "new computer".

    If, as you say, the card mother and any other material is compatible XP then by all means install Windows XP on this machine. As you said you "my idea is to get the XP and keep as long as possible, even after support ceased in 2014, because I like it better than any other operating system." You have been made aware of possible problems concerning the lack of support and you are ready to accept those. The only problem is to get a copy of Windows XP from a reliable source. Unfortunately, I can't help you with that. Personally, I prefer to get my software direct from the manufacturer or by a reliable retailer. As no other retailer has copies of Windows XP you are, unfortunately, has left the search for credible resource on the web.

    My note to the subject of sticking with Windows 7 or 8 on your new computer has been in regards to your initial comment to a "new computer". I have two computers that are running Windows 7 and Windows 8, but then again maybe I need the additional machines and you do not have.

    I have to admit that Windows XP is a great operating system, and to be honest, I also use it on a virtual machine on one of my PC. However it is more for support reasons than the generalization on my part.

    Windows 7 get some getting used to, but I found it a usable operating system. Windows 8, however, is an altogether different beast. You love or hate it and judging by the comments on the Microsoft forums many people hate everything simply. Yet once I used it since the first beta of the operating system, so I'm used to it.

    I agree with voluntary J on Windows XP Mode. This is useful if you have applications that are not compatible with Windows 7. However, as you said in your reply to J to volunteer, you must upgrade to Windows 7 Professional. You can run Windows XP on a virtual machine, with, say, Microsoft Virtual PC 2007 (as a free option); However, you should always buy a copy of XP and new Virtual Machines have some restrictions, especially when it comes to certain types of hardware connected to your PC. Maybe your best bet, if you prefer to upgrade would be to use Windows XP from Windows 7 mode.

    I hope that you succeed in your quest for a reliable copy of Windows XP

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Satellite L300-190, (PSLB8E) and the installation of Windows XP Home edition

    Can I Satellite PSLB8E use this BIOS and configure XP Pro without doing anything else?

    Set controller SATA compatibility mode, and then use Setup / Cd XP Pro?

    It should work. Put in compatibility mode and try to install Windows XP Home edition, but use the Windows XP CD edition SP2 family facilities.
    It is very important.

  • What are the differences between Windows XP Home Edition and Windows XP Pro?

    What are the benefits of Windows XP Pro on Windows XP?

    Tuesday, December 14, 2010 22:24:33 + 0000, Dave1939 wrote:
     
    > What are the advantages of Windows XP Pro on Windows XP?
     
     
    First of all, note that it is not Windows XP Pro and Windows XP, there
    Windows XP Pro vs Windows XP Home Edition.
     
    XP Home and Professional are identical except that professional
    includes a few features (primarily related to security and networking)
    away from home? Most individuals need not and would never use
    These extra features and will see no benefit from the upgrade.
    For details, go to
     
     
     
     
    Also note another point, not included in one of the foregoing:
    Professional only allows ten simultaneous network connections and home
    5.
     
     

    Ken Blake (MS-MVP)

  • New drive HARD and no operating system on Satellite C660

    Hi guys and girls

    I recently had some problems with my laptop, never resolved so the company that sent it just installed a new hard drive and outside to lose all my stuff that I had not saved, I lost my OS too.

    The company told me that as I bought the phone in Australia, they had no record of recovery for this laptop.
    They then directed me to the toshiba support site that deals with this. So not helping at all really. I need to know how to actually perform the recovery and where I can get the recovery media of!

    What I have to download it on another computer and transfer it?
    Pretty epic question, but I am a student in Holland right now and need of this laptop ASAP!

    Really appreciate any help that can be provided.

    Thank you

    >.. then the company I sent to...
    Did you send your laptop to the Toshiba authorized service provider?

    For a long time, Toshiba offers notebooks without DVD recovery, but with the preinstalled Toshiba Recovery Disk Creator. S manuals document is a detailed how to create this recovery disc. I presume you didn't create this recovery disk, right?

    Now, after Exchange of HARD drive, you can install original recovery image using the installation of Toshiba recovery disc. There's no other way to do it. This is the case if you want to have the factory settings once again.
    Of course, you can install version of the OS, but to do this you need original disk from Microsoft and valid license (product key).

    Return to service. In General, they were right. They can not help you with recovery disk because European companies or providers offer don t taken such supported for laptops not EMEA.
    EMEA is Europe - Middle East - North Africa.

    If possible, install OS using Microsoft Win7 disk. All the drivers, tools and utilities for your Australian model, which you can download from http://www.mytoshiba.com.au/

    If you have any other questions you are welcome.

  • Satellite L300D - new drive HARD and recovery USB loading

    I have a satellite L300D. The hard drive has failed. I have the recovery on a USB part. I bought a new hard drive and that you have installed in the laptop.

    I can boot the laptop off the usb and then when I try to do recovery it asks drivers for HARD drive or he asks the recovery DVD to be installed!

    Anyone know if there is something special I need to do to the new HARD drive?

    Thank you

    Hello

    Do you have created disk recovery or recovery memory flash USB using the Toshiba Recovery Media Creator?

    If you have created a recovery disk, you should recover the laptop using this disc

  • Installed the new drive hard and now I get a pop up that says that my windows is not genuine.

    I upgraded my hard drive on my Dell Inspiron 1750. Now, I get a pop up that says that my windows is not genuine. But under the control of configuration\systeme and Security\System, it says my windows is activated. It is an OEM with Windows7 system House. Did that clone a new (bigger, 1 TB) hard disk and then install. In addition, windows update does not work now either. Said the service is not running.

    You have installed RemoveWAT at some point in the past.

    Now we must try to clear up the mess :(

    Best way to fix it now (since we do not know what version of RemoveWAT served) is to run WATFix...

    Download WATFix - make sure you click the link in the page, not the big shiny buttons! - and use it.

    Then post back with another MGADiag report, and we will see what we can do.

  • Pavilion dv6-3100sa: installed the new drive hard and now I need drivers windows 7

    Hi people,

    Can someone point me in the right direction for all the drivers for my laptop. I had to replace the hard drive and I can't get the correct drivers and software on the hp site.

    Windows 10 does not work on this machine because the graphics drivers are not available, so I need to re - install windows 7 original...

    any help is appreciated...

    Stephen

    Hello:

    All the drivers, specifications and manuals are missing from pages support again.

    This happened earlier in the week also.

    Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

    Whether the weekend will not help much either.

  • I have a hp dv6 and tries to activate wlan to go online with my ps3. and have no idea how activate the wlan

    I ran persistent wireless tracing in administrater and a few other ways but getting no where...

    Hello

    I suggest you follow the steps that can help you solve your problem below:

    (a) click the Start button.

    (b) type services.msc in the search box and press on enter.

    (c) search for autoconfiguration WLAN Service and check if it set to Automatic & not automatic delayed.

    I would also check if there are keys to activate WLAN.

    You can also uninstall the drivers for WLAN and restart to load the genric drivers and see if it works well or not.
  • Tecra S5 - 12L - lack of drivers of Windows XP Home edition

    Make a new Winn XP clean install on my Tecra S5.

    I could install all hardware drivers, but I keep 2 yellow?-brands in the feature list:
    first one: "PCI-memorycontroler" (this is for vista hardware, and there is no available XP driver) so that it is not a problem.

    Second: "PCI Simple Communications-check" I do not know what material it is.

    When I look in the list of drivers available tecra S5, I don't know in what cattegory drivers I have to watch.

    The material property:
    Expensive ID: PCI VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03\3 & B1B FB68 & 0 & 18

    Hardware ID: PCI VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03
    PCI\VEN_8086 & DEV_2A04 & SUBSYS_00011179
    PCI\VEN_8086 & DEV_2A04 & CC_078000
    PCI\VEN_8086 & DEV_2A04 & CC_0780

    Compatible, ID: PCI VEN_8086 & DEV_2A04 & REV_03
    PCI\VEN_8086 & DEV_2A04
    PCI\VEN_8086 & CC_078000
    PCI\VEN_8086 & CC_0780
    PCI\VEN_8086
    PCI\CC_078000
    PCI\CC_0780

    Does anyone know this driver to the list of choices.

    Everything works well, but it does not

    Thanks in advance,

    Jos

    Have you tried to identify devices following the advice of http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78?

Maybe you are looking for

  • Video cannot play in mobile youtube

    using Galaxy s6310, internet very well, already installed flashplayer. only youtube in mobile version is impossible to read. When I click on play my screen becomes white and video no charge. Another streaming site and youtube destkop work as well. on

  • Photosmart 7960: Hp photosmart 7960 driver and software

    Hi everyone I am after the drivers and now photo software for the printer I lost the cd of th. The printer is now one of the retired list of hp. Concerning James

  • CyberLink Webcam cannot find a built-in webcam

    I have a vista, pavilion dv7. When I try to use Skype, it says to start my CyberLink Webcam. When I try to launch CyberLink, it is said that here he can not find a webcam built-in to my computer. This problem just happened all of a sudden, I've never

  • Fusion of data display objects

    HelloI have to present the results of two queries merged, invoices, and receipts that are in different tables on the database.I have a query that returns the invoices, and another that returns revenues based on the selected invoice.I created 2 object

  • When is it best to use the canvas and when is it best to use OAM?

    I'm still struggling with this issue.  I have asked before here and am still not clear on what follows.You have created something in 2015, CC animate and you want to put it on a page of HTML using Dreamweaver.How do you decide if you want to use the