New user - questions on the 1st Image

Similar Questions

• BlackBerry Smartphones New User: Questions about the internal clock synchronization, software updated

  Hellko Forum.

  For two weeks, I use a Blackberry Bold 9900 with OS7.1 and I am very satisfied with the device.

  But there are some questions for which I have found no solution:

  (*) Looking back at my old Siemens S10D or SK65, they had an option to synchronize the internal clock with time of the GSM network information. Will there be a similar option in the Bold 9900? What I found was an option in the date and time settings. But when I put "Government aktualisieren" (setting the time) on 'automatic' then time switches to October 5, 2013, 12:20 and nothing happens. Is it possible to connect to an NTP server? If so, where to enter the address?

  (*) On this Web page http://de.blackberry.com/software/smartphones/update/blackberry7-os.html?LID=de:bb:support:update - of... Describes how to upgrade the software of the smartphone "over the air". But I can't find this option. Where the developer has hidden this feature?

  Thanks a lot for the answers in advance

  Best regards

  JueDan

  Hello again,

  noone has an answer to my questions?

• Windows 8 going on the new user interface on the desktop.

  Windows 8 going on the new user interface on the desktop.  I don't want to do.  How can I prevent it from the new UI on the old desktop?

  I ran the install checker and it can and it works fine.

  I found the answer last night with the help of some very helpful tech support from Microsoft.  Find it, it was the touchpad driver.  It was an older version, and once that it has been updated the user interface seems to be 'don't call him underground mode.
  As I said, fine, but we'll see over time.
   

• RE: Displacement of layer masks of a file .psd in a new file .psd of the same image.

  I need to redo the rough edits a file that I invested a lot of time, create layer masks.  Is it possible to save these layer masks and move them to a new file .psd of the same image; the same size?  (I use Ps Cs5 on Windows XP.)  Thank you.

  Just drag the layers in the original file in the new. The masks will come with them.

• Squarespace user. Want more options on my site. Adobe has tutorials on Java Script, HTML, and CSS? [was: new user Question!]

  Hello!

  I am a new user to adobe creative cloud. I'm a Web site manager for pge production broadcast in my school and I use squarespace but I want to upgrade and have more opportunities with my websites. Adobe has tutorials on Java Script, HTML, and CSS?

  Not in the way, I think you mean. There are a number of very generous gurus on this forum that will help hard problem solve you your code, and the best way to learn is always, spoil, figure it out and move on to the next thing. :-)

  Googling a question will generally help to guide you on the right track and you can always visit W3 Schools or Code Academy for free tutorials or check if there is a Free Code Camp in your area. Sources for tutorials or classes are Lynda.com, Noble of officeand the General Assembly.

  Chris

• Allowing non-root users to mount the ISO images in VSphere

  Hello!

  I'm running ESXi 5 on a root server and want my users to be able to mount a local data store ISO images in their respective VMs.

  I created a role to allow them to start/stop/restart etc their VM, that works well. But I am confused as what permissions, I need to define where to allow them to browse and set an ISO for their virtual CD drives. The authorization 'Browse the data store', set for the virtual machine and the server, doesn't really help.

  All ideas are welcome!

  Sorry for the late reply,

  I can choose an ISO local data store and create a new virtual machine with the following privileges on a stand-alone ESXi 5:

  Data store > allocate space

  Data store > Browse Datastore

  Home > operations > reconfigure virtual computer

  Resources > assign virtual machine to the list of resources

  Virtual machine > all (but this could / should be more restrictive)

• two questions about the scattered images secure

  I created an image that is secure and encrypted for sensitive documents.

  I have two questions:

  1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control.  But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias').  Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original.  Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?

  2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk).  Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available?  I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.

  Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).

  FYI: I'm running 10.11.2

  Thank you.

  (1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.

  You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).

  (2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.

• New user cannot access the transferred music draws on Windows Media Player 11

  I just added a new user to my window 11 downloaded pc game on there it does not show the music I would also transfer music from my library in library here and can u help me with these problems

  Library to point to the folder monitored by the player

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry smartphones new user questions

  New user here-

  Can I use different ICONS on the home screen to different eMails that I established?

  Secondly, how can I set up a speed dial key to add the phone number with a delay, then a box mailbox and password to make it easy to get a work voicemail messages?  You must have a way... All help apprecated.

  willertel wrote:
  I want to set up a short number that made up my office and enters the letters/password box after voice mail comes into play.  Speed dial, I'm putting in place is for my office - not the Blackberry... I can only see ways to add contacts (with none of the appendices) existing at a speed dial button...

  I don't know what you mean by "appendices".

  You can create a contact phone number will contain a break, then continues the other numbers and then wait for a click from you and then continues again.

  from the home screen:
  phone application > menu > help > phone basics > make a call > tasks > add a pause or a wait to a phone number

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• How my new users access to the data in the database?

  Hello

  I created a database with new users who will need to access the database, but as soon as I connect to one of the new users can't access tables or any of the data that I had inserted previously.

  Any help would be greatly apprciated!

  Thank you

  Rory

  (Running Oracle 11 g)

  As connect you to the database by default, you can only access your objects or object that you access directly by prefixing its owner. In your case, not only you must give the user but also needs prefix synonym/owner access rights to access these objects. for example

  user that has (you) have following things:

  EMP (grant select on emp to UserB ;)

  Dept (grant select on dept to UserB ;)

  User B

  Select * from UserA.emp;

  Select * from UserA.dept;

• Question to the first image in a clickable column/line

  Hello

  I hope someone can help. I created a page in lines and columns. All images are a hyperlink in each cell. For some reason, the first image of each line is not clickable, while the rest of them are. I've been in the Inspector, and I can't find the problem. http://store.skeeterz71.com/

  Thank you

  First photo not clickable

  

  Clickable second photo

  

  There is no need for you to get all hostile. I appreciate you pointing me in the right direction...

• New user with all the privileges

  Dear all,
  We have created a user USER1 in RPD.
  We should all priveliges to User1 as an administrator. (Answer, dashboard,... should access User1).
  How to set up?
  
  Thank you
  Govind R

  Hi reda,.

  Just to clarify, is your user (User1) in the RPD is grouped under administrator?

  If the user is grouped under administrator, then we can follow a simple step in BI front end for the user to access all objects in front end.

  In the BI dashboard, click on settings you can find to manage users and groups presentation catalog. Here, we can add User1 to the presentation server administrator group.

  Make sure that your administrator user is set with all the necessary privileges to access answers, dashboard etc.

  Thank you
  Karthikeyan V

• New user: Question on default color "black".

  I apologize for my English is too bad, I hope you understand what I'm saying and help me find the problem.

  I got a deal for print in indesign, and I used the default "black" color to cover an icon, when I exit the job of printing, the "Black" area became overprinting. I had to check the setting of the color 'Black' and it is correct (100% Black, no overprint... etc.)

  Finally, I created a new 100% black (all the setiing is the same as defacult "BlacK") and used it to cover the icon even once, the output document had not discovered any problems at the moment.

  I want to know what is happening to him? Is this normal? If I'm not again I have this overlay problem, should I create a new 'Black' every time?

  Top: using New 'Black '.

  Second: use default "black"(red circle is the object of the overprint)

  

  

  Yes, it is a normal behavior. The black swatch in InDesign overprinted by default to 100%.

  You have discovered the easiest way around it.

  Bob