New video has no file but need to implement right - both
Well, the former was effectively dead and revived just long enough to play through the pc and I would like to get playlists copied on my laptop and then he is dead dead.
has got a new (ebay), one is plugged in. it detected automatically. threw on some files (using windows Explorer) and an old playlist and ran. It worke and there's stuff on it but
When I joined my laptop now, there is nothing show. (winamp shows it empty, he does not see the windows Explorer.
It is always set to autodetect - no mtp or msc
I tried, before selecting the correct those (whoever it is) remove content (so it would not be inaccessible too much room) then set up right.
I wanted to NOT have stuff stuck on this subject, that I couldn't remove it.
I used to have a Creative Zen Micro - who never spoke very well to any system, but at least, kind of feel. But it died while I was too broke to replace and I'm done with this.
-Either MTP or MSC?
and
How can I remove the content it currently holds, but does not know that it is?
I tend to avoid the way to avoid most of the things Microsoft, Windows Media Player but I have and it is said... Let me see... This is a Sansa Clip + but there is nothing else the original folders it came with: music, audio books, Podcasts, etc. - which are empty.
pamelajaye wrote:
When I joined my laptop now, there is nothing show. (winamp shows it empty, he does not see the windows Explorer.
It is always set to autodetect - no mtp or msc
That's your problem. Auto Vice can (and will) connect either mode depending on which computer it is connected at the time.
pamelajaye wrote:
I tried, before selecting the correct those (whoever it is) remove content (so it would not be inaccessible too much room) then set up right.
-Either MTP or MSC?
and
How can I remove the content it currently holds, but does not know that it is?
Well, sample original songs, videos, etc. are installed at the factory in MTP mode. This put your drive and connect to see, then delete them. The songs that you put on can also be transferred in this mode too, so if you can kill 2 birds with 1 stone. If your files are not visible, then as soon as you delete those in MTP mode, disconnect and reconnect in MSC in order to remove those.
The extent of the mode to use? It depends on how you designed to use the player. If you like, or use Rhapsody or any other service subscription DRM crippled, you need to use the MTP. Otherwise, the CSM is the way to go.
I recommend againist using Auto mode. As you have seen, it can cause massive confusion.
Tags: SanDisk Sansa
Similar Questions
-
Audio import is not with video related two files, but other work fine
I registered a game using open source software of broadcaster and trying to change it for download on YouTube, but the audio of this game in particular will not import the video. I can see the raw images in a media player and hear the sound, but when I try and import it into Premiere Pro CC 2015, the audio isn't there. If I import an another games record, it works very well, has the audio and is good for editing and be downloaded. The game, with what I have problems is to evolve step 2 Beta.
Hi DMartinGaming,
You could try renaming the folder of media files, clear the cache of media and re-import. Not better?
Let me know,
Kevin
-
new firefox has multiple problems, I need answers
several problems with this new version.
1. the URL of the site that I'm looking does not apprear in the navigation bar. It stills says "search type here" even after that I have and am looking at a new site.
2. previous/next buttons are gray, so if I look at a web page and navigate it, I can't go back to where I was.
3. the default search in a new tab engine is still Bing, no matter what I type in 'options '.
4. the view of a new page is clumsy and too much space is taken up with a bunch of firefox, even if I take some toolbars. Addition or subtraction of the toolbars from the view does not have a difference in all of the space allocated to the view of the site.
5. I have lost the "kindle-it" icon, so now that if I want to push kindle I have to go to the search at the bottom of the tab Add on process, then open the - several steps that did not previously exist.The first two of these problems are so severe that I spent to googlechrome as my browser by default until they return to normal. the others are boring, but the general impression is that this 'new' version of firefox is very much worse than the previous.
Hello halimabr, most of the problems you've described sound like stem by obsolete extensions - please test if you can reproduce this behavior when you start firefox in safe mode, once...
You can also try to reset firefox and see if that can solve the problem...
-
New laptop has ms vista but no service pack added - what should I do?
Bought a new laptop last week and tried to award-winning homevista windows update but difficulties have ever known of all service packs downloaded.
The Department of customer services of the store that I bought suggested I bring her to the store for a refund? Its a great little notebook and think there must be a solution... not involving me having to purchase windows 7!
Toshiba won't know because they do not support the software...
What should I do - return or continue to try to get their hands on the necessary downloads?
"The Department of customer services of the store that I bought suggested I bring her to the store for a refund?
It was the good advice of sellers.
Click Start > right click on computer > properties > it will tell you it IF there is certainly some SPs No. installed and what version of bits you > 32 bit or 64 bit
Here's information to help you.
And you can also try the Windows Update Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
iMovie export my video in a file?
I exported a video on iMovie last night and it worked fine.
I have just cropped down a minute 17 video, 7 minutes now. I click on click action, file, resolution 1080 p and high quality.
I then click Next and save on documents. I have no record checked theatre. Usually it takes a few minutes to record a video to my files, but now, it doesn't seem to work at all.At the top right of the screen where it shows the circle and the progress that saves your video, the circle is left empty.
When I click it, it says...
Theater - name of my video
Name of my video - Theater (best quality)
The time beside the circle indicates the time for export can be anywhere more than two hours, but will be replacing meaning it can go up to an hour, then back up to 2 hours.
I think that iMovie is trying to save my video to the theater when I have not check marked and am simply eager to save a file?
I notice there is no loading bar that is usually available. Is there something I can do?
First thing to try when iMovie is not behaving properly is to remove preferences. Open iMovie, hold down the command and option keys and select this option to delete the preferences. Is this cut of the film that is the same as that previously shared ok?
-
Windows Media Player-how add a new video of the House to my playlist
I have a few Playlists. I would now like to add several new videos to a playlist, but I couldn't do it. Help, please.
Hello
I would suggest trying the following methods and check if it helps.
Method 1: Add items to the Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library
Method 2: Create or change a regular playlist in Windows Media Player http://windows.microsoft.com/en-US/windows-vista/Create-or-change-a-regular-playlist-in-Windows-Media-Player
Reference:--
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
-
· My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)
I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.
Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.
You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.
This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.
Here is an example of the type of device, I suggest:
http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_bYou need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.
-
I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?
I already tried to deinstallate and reinstallate to the program...
Would be very grateful for any solution... !
Hi Eclumes,
I can't update my first macbook pro CC 2015 but need to edit a file that has been saved with the new version 2015.1 last... any ideas what could be the reason for this?
I already tried to deinstallate and reinstallate to the program...
Are you a specific error when you try to update the application?
In the affirmative, please follow these troubleshooting steps:
Error in downloading, installing or updating Adobe Creative Cloud applications
Thank you
Ilyes Singh
-
Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew was reversed. I need to ME version. Where should I go? MANY thanks, Naomi
The latest product from Adobe's creative cloud that we create no more any version of Creative Suite.
You can check the availability of creative cloud subscriptions in your country from here: https://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-matrix.pdf
Purchase at: pricing and membership creative cloud plans | Adobe Creative Cloud
Also see, modify the language setting for Adobe Creative Cloud applications
Let us know if that helps.
-
I forgot my Adobe ID code I was able to get a new password and my email has not changed, but it seems to me to need an Adobe ID to start using my Photoshop elements 12 new. What should do? It's incredibly frustrating!
Thanks, Sarika, for trying to help me. That link led me to more than one set of steps and I didn't know what to do. But I started to change my password for the 2nd time and struck me somehow to where I can now user ss12.
-
My new Photoshop elements 12 has a RAW plugin file, but when I try to OPEN a photo, there is only generic icons instead of pictures - I can't say one photograph of another! How can I remedy I can't tell what picture I want to open? Thank you!
PSE 12 is expected to open these files.
If get you just one, it opens in the dialog box camera raw in the 12 PES Editor?
If you use file > open in the editor of PES 12 and click on one of the files you see a preview at the bottom of the open dialog box image?
You can also install the microsoft camera codec pack, so you can see the thumbnails in windows Explorer
http://www.Microsoft.com/en-US/Download/details.aspx?ID=26829
You have to always show icons, never thumbnails uncheckedin your windows Explorer Folder Options ?
-
How to use the file that is saved in my new video project
Ho I use adobe Prime Minister 12 with license elements, and when I download the video and edit (delete a scene of her) I save in my new video project in video format very strange *.prel after that when I try to download files of this new is that with the changes in the system can not download because not suport this format *.ples how do I make changes to the format of the new file that is saved in my new video project?
Thanks in advance
stefang
Your work begins in a project file first items 12/12.1 with the file extension PREL. You can change the content of your Timeline and save the project file in a project file if you do not have ready to export the file to a format for playback.
When you are ready to export your content published or not fake chronology, you go to the section of publication + part of the open project where you make your choice of export-
a. file saved on the hard disk of the computer (with various choice of video and audio compressions and file extensions)
b. burn to DVD, AVCHD or Blu - ray disc
What do you do?
a. export your Timeline to file or burn it to a disc?
OT
b. export selectively some of the content rather than the entire contents of the timeline timeline?
For 'a', see section publication + share.
For 'b '.
In the editing area of the program, you set the gray tabs on the work area bar to cover the area to export.
and
When you get to publish + Share/computer/and your choice, make sure that the choice has an option for 'Hand work area Bar Only' and have a check mark next to this option.
The screenshot was made with a version earlier than 11, but still applies to the notion of positioning of the grey tabs and share work area Bar only in the export options.
Please review and consider. For any question or need clarification, please ask.
Thank you.
RTA
-
I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems
Friday, October 19, 2012 19:03:30 + 0000, * address email is removed from the privacy * wrote:
I need to replace a motherboard with a new another brand, what files or drivers that I need to delete not close up with problems starting in windows 7 pro oem current motherboard works but is old and has problems with heat. Not worried about having to re-record software am just worried starting problems
Two points:
1. it is unlikely that your current installation would work if
you have changed motherboards. You need to reinstall itself.2 but you cannot use your current copy of Windows if you change
motherboards, not even if reinstall you it cleanly. The largest
disadvantage of an OEM version, is that its license it binds permanently
the first computer, it is installed on and Microsoft believes that
If you change the motherboards, another computer. It can never
legally be moved to another computer, sold or transferred (except with)
the original computer). If the computer dies or is stolen, your
license dies with him.Ken Blake, Microsoft MVP
-
When I print a Web page to a .pdf or .xps file, it creates a new file, but file Explorer says it's 0 KB in size. These .pdf files will open, but they are white - the only thing that appears is the outline of a page, without anything in the outline. When I print an .xps file, File Explorer shows that it contains 0 KB. When I try to open it, I get a message saying that the XPS Viewer cannot open the file. These things just started for me a few days after I installed Firefox 40.0 on a new computer laptop of Toshiba Satellite with 10 Home Windows operating system. I have the latest version of Flash Player (in fact, I just tried redownloading and reinstalling the current version; that does not solve the problem). I tried to change the format by default to print to .pdf file, but that has not solved the problem. I contacted the chat Windows support site; They told me that it was not a Windows problem. Is this a Firefox problem? If so, you can tell me how to solve the problem, please?
Thank you
ssavageFirst of all, try to disable the extensions to see if that helps this, then try safe mode.
-
New videos appears in the Photos, but not in iMovie
Already when I imported video clips in iPhotos, the clips were made automatically available in iMovie so. Now, when I import video clips in Photos, it is made available in Photos but not in iMovie. Old clips still appear in iMovie, but not the new clips. It is not possible to import new clips with iMovie import function as iMovie cannot locate the file. Photo library only appears as a file in the Finder, and it cannot be opened with any program other than pictures.
How can I get the clips in iMovie?
OS X El Capitan 10.11.1 (B 15, 42)
Version 1.2 (340.4.0) of the Photos
iMovie 10.0.9
Hi a random string,.
The workflow I've always used is to create a folder for the videos and photos that I use in my video project and export (or drag) according to Photos or Aperture or iPhoto library in the folder. Then use the Finder application to import the files into iMovie.
The following resources explain why you can't see the Photos in the media browser:
If the media browser shows all your photo library
https://support.Apple.com/en-us/HT204669Sometimes the media browser, which allows applications like iMovie or Pages use images, pictures, shows all the available photos to your photo library.
This happens when you use iCloud photo library with the preference to optimize Mac storage enabled.
The media browser shows pictures that have the original image or a full preview size stored on your Mac. You can make a photo available temporarily for the media browser by double-clicking on it. This will download the original to your Mac, where it will be available in the media browser so that Photos optimizes still to save disk space.
If you want to take pictures in permanently available Photos in the media browser, follow these steps:
- Select file > New Album... from the menu bar of Photos. Name the new album.
- Click on the photos you want to make available in the media browser.
- Click the Add button.
- Click on the Albums tab at the top of Photos and find the new album you created.
- CTRL-click (or right-click) the album, then select Download this Mac originals.
This will download the full resolution of the images you have selected for your Mac, which makes them available at all times in the media browser.
Note: You can do all the photos in your photo library available at all times for the media browser allowing to download the originals of the Mac in the preferences of Photos, but you will lose the benefits of clutter in preference to optimize Mac storage.
Last modified: June 1, 2015
Take a look at this section of the iMovie User Guide:
Import on your Mac media
http://help.Apple.com/iMovie/Mac/10.0/#mov6fa10197dSometimes the media browser, which allows applications like iMovie or Pages use images, pictures, shows all the available photos to your photo library.
This happens when you use iCloud photo library with the preference to optimize Mac storage enabled.
The media browser shows pictures that have the original image or a full preview size stored on your Mac. You can make a photo available temporarily for the media browser by double-clicking on it. This will download the original to your Mac, where it will be available in the media browser so that Photos optimizes still to save disk space.
If you want to take pictures in permanently available Photos in the media browser, follow these steps:
- Select file > New Album... from the menu bar of Photos. Name the new album.
- Click on the photos you want to make available in the media browser.
- Click the Add button.
- Click on the Albums tab at the top of Photos and find the new album you created.
- CTRL-click (or right-click) the album, then select Download this Mac originals.
This will download the full resolution of the images you have selected for your Mac, which makes them available at all times in the media browser.
Note: You can do all the photos in your photo library available at all times for the media browser allowing to download the originals of the Mac in the preferences of Photos, but you will lose the benefits of clutter in preference to optimize Mac storage.
Last modified: June 1, 2015
Import media by dragging it from the Finder
Select a file, command-click to select several files, or select a folder of files and do drag the selection from the Finder to the event in the list of libraries in iMovie.
The clips appear in the event.
Import using the import window media
If the media you want to import is on an external hard drive, connect it to your Mac and turn it on.
Click Import on the toolbar.
In the devices section of the sidebar of the import window, select the drive or device you want to import media.
The contents of the drive or device is displayed in a list at the bottom of the import window. You can individually select the clipsin the list view, and a preview of the selected item appears at the top of the import window.
You can perform the following actions:
To sort videos in the view of list data such as time, creation date, size and so on: click on the column at the top of the display of the list headers.
To add a folder of press frequently used in the Favorites folder: drag a folder from the list on the right of the 'Favorites' header in the sidebar.
To remove a folder from the favorite section: Ctrl-click on the folder and select Remove from the context menu in the sidebar.
To quickly navigate between the clips, fast forward or rewind, move the pointer over the preview at the top of the import window, and do one of the following:
To play or pause the selected clip: click on the Play button (or press the space bar).
To access the next or previous item: click the next or previous button.
Note: If you are at or near the end of the selected item, you can click the back button to return at the beginning of the clip.
For fast forward: move the pointer over the following button and hold down the mouse or trackpad button.
To move backward: move the pointer on the back button and hold down the mouse or trackpad button.
Do one of the following:
Choose an existing event to import clips in: select the event in the context menu "import to" at the top of the import window.
To create a new event to import clips in: choose new event from the context menu "import to", type a name for the new event and click OK.
To learn more about the events, see organize the library.
Do one of the following:
To import all plans: click all import.
To import only some of the clips: command-click on each clip that you want to import, then click Import selected (the button import changes its name).
Close the import window, and your clips appear in the event. According to the length of each element and the number of clips that you import, you can see a progress indicator in the upper right of the window, while the clips are imported.
You can continue working in iMovie, then import finishes.
Happy holidays!
Maybe you are looking for
-
I want to cancel a plan to ICloud 50 GB of storage, what should I do?
I want to cancel a plan to ICloud 50 GB of storage, what should I do? I have
-
How can I change the function of the key chip on the Quantico. I was told you can by a representative of the US Cellular sales, but he did not know how. Motorola said I need to contact my service provider. My carrier says that I must connect with mot
-
Cannot install drivers for Canon Pixma MG7150
my new mg7150 of canon printer drivers settles I get code 0001 and0002 I asked canon to canon help could not solve the problem, they suggest that I contact windows because they may be able to help I am running windows 7 32 bit, the drivers work on my
-
How to access a hard drive belonging to another computer, I have a bunch of hard drives and before you format it to use it again, I would like to see what is their. Thank you maldog
-
CSA 5.1 and 6.0 MC on the same server
Hello Anyone know if there are problems with enforcement MC 5,1 CSA and CSA MC 6.0 on the same Windows 2003 Server? Are their questions with them in writing to the same database? I'll have to upgrade the 200 server operating system to SP2, so I hope