News about setting up VPN on ASA 551

Hello

I try for the first time to the VPN connections setup from outside back to the corporate network. With the help of the wizard of the SMDA to configure VPN access and it seems ok at first. I can connect to the ASA without problem, but I can't see all hosts on the network at all! I had created a pool to assign 10.0.1.240 to 10.0.1.250 addresses to VPN clients so that they can access the devices on the 10.0.1.0 network. Nothing works from this point on. Can anyone suggest what could be the problem? Is it necessary to do any NAT to ping devices on the same network?

Thanks in advance,

Tan

Tan,

By browsing and adding your configurations, it works. I can now ping on host 10.0.1.119 and looks like it works.

It's big.

"By browsing and adding your configurations, it works. I can now ping on host 10.0.1.119 and looks like it works.

Of course you can. Just keep in mind that you must use different VPN pools for different profiles in order to clarify the NATs exempted by pool VPN, that will achieve the objective of 'form of restrictions when the VPN user to network 10.0.1.0, he cannot ping or even hosts on the other two'

Another way to accomplish what you want is downloadable ACL using a RADIUS server, which is a bit more complicated

Tags: Cisco Security

Similar Questions

New for mapping SSL VPN ACS ASA - ASA groups

Greetings,

I am new to ASA, so any help is greatly appreciated.

I just installed and installed an ASA 5520. I installed an SSL VPN. What I'm trying to achieve is to configure profiles of different groups and different users can access various resources when they access the VPN.

Current config-

ASA 5520 v8.3

ACS 4.0

Field of Windwos 2003

I have different installation profiles in the ASA. (i.e. business Dept.) When I choose in the drop down menu, it allows me to open a session and displays the options I've chosen for this group. The problem is that I can connect in this group with any account. GBA, all windows domain users are in the default group. I guess the default group is being processed and which has hosted and user logon.

Can anyone provide a good article or tips on how to configure the ASA and the ACS for several groups of users. We have several departments that will have to get the parameters when they connect. The ACS groups are mapped to the Windows groups that correspond to each Department

Any help is greatly appreciated.

Thank you

Tim

Hello

I think that you need to activate locking group.

In order to configure Group locking, send group policy name in the attribute class 25 on the Authentication Dial - In User Service (RADIUS Remote) server and choose the group to lock the user in policy. For example, to lock the user 123 of Cisco in the RemoteGroup group, define the class of attributes 25 Internet Engineering Task Force (IETF) UO = RemotePolicy; for this user on the RADIUS server.

Troubleshooting IPSec Site to Site VPN between ASA and 1841

Hi all

in the past I've implemented several VPN connections between the devices of the SAA. So I thought a site link between an ASA site and 1841 would be easier... But it seems I was mistaken.

I configured a VPN Site to Site, as it has been described in the Document ID: SDM 110198: IPsec Site to Site VPN between ASA/PIX and an example of IOS Router Configuration (I have not used SDM but CCP).

I have run the wizards on the ASA with ASDM and the current IOS version 15.1 1841, with CCP.

It seems to Phase 1 and 2 are coming although my ASA in ADSM reports (monitoring > VPN > VPN statistics > Sessions) a tunnel established with some of the Tx traffic but 0 Rx traffic),

On the ASA:

Output of the command: "sh crypto ipsec its peer 217.xx.yy.zz.

address of the peers: 217.86.154.120
Crypto map tag: VPN-OUTSIDE, seq num: 2, local addr: 62.aa.bb.cc

access extensive list ip 192.168.37.0 outside_2_cryptomap_1 allow 255.255.255.0 172.20.2.0 255.255.255.0
local ident (addr, mask, prot, port): (LAN-A/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (LAN-G/255.255.255.0/0/0)
current_peer: 217.xx.yy.zz

#pkts program: 400, #pkts encrypt: 400, #pkts digest: 400
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 400, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0

local crypto endpt. : 62.aa.bb.cc, remote Start crypto. : 217.xx.yy.zz

Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 39135054
current inbound SPI: B2E9E500

SAS of the esp on arrival:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4374000/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
outgoing esp sas:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4373976/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001

Output of the command: "sh crypto isakmp his."

HIS active: 4
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 4

IKE Peer: 217.xx.yy.zz
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE

On the 1841

1841 crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
217.86.154.120 62.153.156.163 QM_IDLE 1002 ACTIVE

1841 crypto ipsec #sh its

Interface: Dialer1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2

SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

outgoing ah sas:

outgoing CFP sas:

Interface: virtual Network1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2

SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

outgoing ah sas:

outgoing CFP sas:

It seems that the routing on the 1841 is working properly as I can tear down the tunnel and relaunch in scathing a host on the network of 1841, but not vice versa.

Trounleshoot VPN of the 1841 report shows a message like "the following sources are forwarded through the interface card crypto. (172.20.2.0 1) go to "Configure-> routing" and correct the routing table.

I have not found an error on the 1841 config so if one of the guys reading this thread has an idea I appreciate highly suspicion!

It's the running of the 1841 configuration

!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host name 1841
!
boot-start-marker
start the system flash c1841-adventerprisek9 - mz.151 - 1.T.bin
boot-end-marker
!
logging buffered 51200 notifications
!
AAA new-model
!
!
AAA authentication login default local
!
AAA - the id of the joint session
!
iomem 20 memory size
clock timezone PCTime 1
PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
dot11 syslog
IP source-route
!
No dhcp use connected vrf ip
!
IP cef
no ip bootp Server
IP domain name test
name of the IP-server 194.25.2.129
name of the IP-server 194.25.2.130
name of the IP-server 194.25.2.131
name of the IP-server 194.25.2.132
name of the IP-server 194.25.2.133
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
object-group network phone
VoIP phone description
Home 172.20.2.50
Home 172.20.2.51
!
redundancy
!
!
controller LAN 0/0/0
atm mode
Annex symmetrical shdsl DSL-mode B
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 62.aa.bb.cc
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to62.aa.bb.cc
the value of 62.aa.bb.cc peer
game of transformation-ESP-3DES-SHA
PFS group2 Set
match address 100
!
!
!
interface FastEthernet0/0
DMZ description $ FW_OUTSIDE$
10.10.10.254 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
Description $ETH - LAN$ $FW_INSIDE$
IP 172.20.2.254 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1412
automatic duplex
automatic speed
!
ATM0/0/0 interface
no ip address
No atm ilmi-keepalive
!
point-to-point interface ATM0/0/0.1
PVC 1/32
PPPoE-client dial-pool-number 1
!
!
interface Dialer1
Description $FW_OUTSIDE$
the negotiated IP address
IP mtu 1452
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 2
PPP authentication chap callin pap
PPP chap hostname xxxxxxx
PPP chap password 7 xxxxxxx8
PPP pap sent-name of user password xxxxxxx xxxxxxx 7
map SDM_CMAP_1 crypto
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
!
!
The dns server IP
IP nat inside source static tcp 10.10.10.1 808 interface Dialer1 80
IP nat inside source static tcp 10.10.10.1 25 25 Dialer1 interface
IP nat inside source overload map route SDM_RMAP_1 interface Dialer1
IP nat inside source overload map route SDM_RMAP_2 interface Dialer1
IP route 0.0.0.0 0.0.0.0 Dialer1 permanent
!
logging trap notifications
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 172.20.2.0 0.0.0.255
Note access-list category 2 CCP_ACL = 2
access-list 2 allow 10.10.10.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
Note access-list 100 IPSec rule
access-list 100 permit ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
Note CCP_ACL the access list 101 = 2 category
Note access-list 101 IPSec rule
access-list 101 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 101 permit ip 172.20.2.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 2
Note access-list 102 IPSec rule
access-list 102 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
!

!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101
!
allowed SDM_RMAP_2 1 route map
corresponds to the IP 102
!
!
control plan
!
!
Line con 0
line to 0
line vty 0 4
length 0
transport input telnet ssh
!
Scheduler allocate 20000 1000
NTP-Calendar Update
NTP 172.20.2.250 Server prefer
end

As I mentioned previously: suspicion is much appreciated!

Best regards

Joerg

Joerg,

ASA receives not all VPN packages because IOS does not send anything.

Try to send packets to the 1841 LAN to LAN of the ASA and see is the "sh cry ips its" on the 1841 increments the encrypted packets (there not)

The problem seems so on the side of the router.

I think that is a routing problem, but you only have one default gateway (no other channels on the router).

The ACL 100 is set to encrypt the traffic between the two subnets.

It seems that the ACL 101 is also bypassing NAT for VPN traffic.

Follow these steps:

Try running traffic of LAN router inside IP (source of ping 192.168.37.x 172.20.2.254) and see if the packages are not through the translation and obtaining encrypted.

I would also like to delete 100 ACL from the inside interface on the router because it is used for the VPN. You can create an another ACL to apply to the interface.

Federico.

CME SSL VPN with ASA

Hi all

We are working on a new deployment of CME 9.1 for a small office. As part of this deployment, our plan was to have several remote phones connect via SSLVPN to an ASA on our network border allowing them to communicate with the router of the CME. We bought the appropriate of the VPN to ASA and licenses of paper for phones remotely.

I'm following the instructions in this document: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configura...

However, the penalty, I'm having is that when I try to enter the settings for vpn-Group (page 19 of the pdf) the command is not available on my router - unrecognized command. I fear that this could mean that I'm missing a license/feature set to my router CME, is that correct? We bought a C2921CME-SRSTK9 router, but I may need the SEC/K9 license? If this is the case, can someone show me the part number or SKU, I would need to buy?

Moreover, is anyway that I could get around to adding this to the router config - perhaps change the configuration of phone XML directly?

Thanks in advance!

It is correct, you will need the license of security. SKU is: L-SL-29-SEC-K9 =

http://www.Cisco.com/c/en/us/products/collateral/routers/1900-series-int...

Order of operations NAT on Site to Site VPN Cisco ASA

Hello

I have a question about the order of operations NAT on Site to Site VPN Cisco ASA 8.2.x. I have a scenario where the internal IP address of the range 10.17.128.x are NATTED IP public 31.10.10.x. below is the config:

Tunnel normally passes traffic to dmz - 31.10.11.10, 31.10.11.11 servers.

But the servers NATTED (10.17.128.x <->31.10.10.x) does not work.

inside_map crypto 50 card value transform-set ESP-3DES-SHA

tunnel-group 100.1.1.1 type ipsec-l2l

tunnel-group 100.1.1.1 General-attributes

Group Policy - by default-PHX_HK

IPSec-attributes tunnel-group 100.1.1.1

pre-shared key *.

internal PHX_HK group policy

PHX_HK group policy attributes

VPN-filter no

Protocol-tunnel-VPN IPSec svc webvpn

card crypto inside_map 50 match address outside_cryptomap_50

peer set card crypto inside_map 50 100.1.1.1

inside_map crypto 50 card value transform-set ESP-3DES-SHA

inside_map crypto 50 card value reverse-road

the PHX_Local object-group network

host of the object-Network 31.10.11.10

host of the object-Network 31.10.11.11

host of the object-Network 31.10.10.10

host of the object-Network 31.10.10.11

host of the object-Network 31.10.10.12

host of the object-Network 31.10.10.13

host of the object-Network 10.17.128.20

host of the object-Network 10.17.128.21

host of the object-Network 10.17.128.22

host of the object-Network 10.17.128.23

the HK_Remote object-group network

host of the object-Network 102.1.1.10

inside_nat0_outbound list extended access permitted ip object-group PHX_Local-group of objects HK_Remote

ACL_INSIDE list extended access permitted ip object-group PHX_Local-group of objects HK_Remote

ACL_OUTSIDE list extended access permitted ip object-group HK_Remote-group of objects PHX_Local

outside_cryptomap_50 list extended access permitted ip object-group PHX_Local-group of objects HK_Remote

Route outside 102.1.1.10 255.255.255.255 30.1.1.1 1

public static 31.10.10.10 (Interior, exterior) 10.17.128.20 netmask 255.255.255.255

public static 31.10.10.11 (Interior, exterior) 10.17.128.21 netmask 255.255.255.255

public static 31.10.10.12 (Interior, exterior) 10.17.128.22 netmask 255.255.255.255

public static 31.10.10.13 (Interior, exterior) 10.17.128.23 netmask 255.255.255.255

He started to work when I did another group of object by name PHX_Local1 and added to the list of access inside_nat0_outbound, instead of the object group PHX_Local, as below:

the PHX_Local1 object-group network

host of the object-Network 31.10.10.10

host of the object-Network 31.10.10.11

host of the object-Network 31.10.10.12

host of the object-Network 31.10.10.13

No inside_nat0_outbound access list extended only to allowed ip object-group PHX_Local-group of objects HK_Remote

inside_nat0_outbound list extended access permitted ip object-group PHX_Local1-group of objects HK_Remote

Can you please help me understand why group object PHX_Local failed with access-list inside_nat0_outbound, but he began to work with the Group of objects PHX_Local1.

Also, if you could tell me the order of operations to NAT via VPN Site to Site, it would be useful.

Thank you

Kind regards

Thomas

Hello

I think you could have said the original question in a way that could be missleading. In other words, if I understand now.

From what I understand now, you have the DMZ set up the server that are measured with a public IP address on the real servers. And for those that you have configured NAT0.

Then you have other servers that do not have public IP addresses themselves, but they are translated on the SAA.

If this is the case, then the next question would be. The server with the NAT should attend the L2L VPN connection with their real IP or address IP NAT.

Of course if you configure static NAT for the same servers and NAT0 the NAT0 will always win.

You have these guests who were not able to use the VPN L2L

31.10.10.10 10.17.128.20

31.10.10.11 10.17.128.21

31.10.10.12 10.17.128.22

31.10.10.13 10.17.128.23

IF you want them to go to the VPN L2L with their original IP address then you must configure

object-group, LAN

host of the object-Network 10.17.128.20

host of the object-Network 10.17.128.21

host of the object-Network 10.17.128.22

host of the object-Network 10.17.128.23

object-group, REMOTE network

host of the object-Network 102.1.1.10

inside_nat0_outbound list extended access allowed ip-group of objects LOCAL object-group remote

outside_cryptomap_50 list extended access allowed ip-group of objects LOCAL object-group remote

IF you want to use the L2L VPN with the public IP address, then you must configure

object-group, LAN

host of the object-Network 31.10.10.10

host of the object-Network 31.10.10.11

host of the object-Network 31.10.10.12

host of the object-Network 31.10.10.13

object-group, REMOTE network

host of the object-Network 102.1.1.10

outside_cryptomap_50 list extended access allowed ip-group of objects LOCAL object-group remote

EDIT: in this case you naturally do not configure any NAT0 for actual IP addresses we want precisely the IP addresses to be visible to the L2L VPN with the IP NAT address.

Or you can of course use the same "object-group" as currently but change the content in an appropriate manner

Be sure to mark it as answered if it was answered.

Ask more if necessary

-Jouni

VPN between ASA and cisco router [phase2 question]

Hi all

I have a problem with IPSEC VPN between ASA and cisco router

I think that there is a problem in the phase 2

Can you please guide me where could be the problem.
I suspect questions ACL on the router, but I cannot fix. ACL on the router is specified below

Looking forward for your help

Phase 1 is like that

Cisco_router #sh crypto isakmp his

IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
78.x.x.41 87.x.x.4 QM_IDLE 2006 0 ACTIVE

and ASA

ASA # sh crypto isakmp his

ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1

1 peer IKE: 78.x.x.41
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE

Phase 2 on SAA

ASA # sh crypto ipsec his
Interface: Outside
Tag crypto map: Outside_map, seq num: 20, local addr: 87.x.x.4

Outside_cryptomap_20 ip 172.19.209.0 access list allow 255.255.255.0 172.
19.194.0 255.255.255.0
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer: 78.x.x.41

#pkts program: 8813, #pkts encrypt: 8813, #pkts digest: 8813
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 8813, model of #pkts failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0

local crypto endpt. : 87.x.x.4, remote Start crypto. : 78.x.x.41

Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: C96393AB

SAS of the esp on arrival:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4275000/3025)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4274994/3023)
Size IV: 8 bytes
support for replay detection: Y

Phase 2 on cisco router

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x0 (0)

SAS of the esp on arrival:

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:

outgoing ah sas:

outgoing CFP sas:

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 8947, #pkts decrypt: 8947, #pkts check: 8947
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x3E9D820B (1050509835)

SAS of the esp on arrival:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 29, flow_id: Motorola SEC 1.0:29, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4393981/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 30, flow_id: Motorola SEC 1.0:30, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4394007/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

outgoing ah sas:

outgoing CFP sas:

VPN configuration is less in cisco router

access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 101 permit ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 101 permit ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 101 permit ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connect

access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 105 deny ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 105 deny ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 105 deny ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connect

sheep allowed 10 route map
corresponds to the IP 105

Crypto ipsec transform-set esp-3des esp-md5-hmac mytransformset

mycryptomap 100 ipsec-isakmp crypto map
the value of 87.x.x.4 peer
Set transform-set mytransformset
match address 101

crypto ISAKMP policy 100
BA 3des
md5 hash
preshared authentication
Group 2
ISAKMP crypto key xxx2011 address 87.x.x.4

Your permit for 105 ACL statement should be down is changed to match because it is the most general ACL.

You currently have:

Extend the 105 IP access list
5 permit ip 172.19.194.0 0.0.0.255 (18585 matches)
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect

It should be:

Extend the 105 IP access list
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect

IP 172.19.194.0 allow 60 0.0.0.255 (18585 matches)

To remove it and add it to the bottom:

105 extended IP access list

not 5

IP 172.19.194.0 allow 60 0.0.0.255 any

Then ' delete ip nat trans. "

and it should work now.

Problem with IPsec VPN between ASA and router Cisco - ping is not response

Hello

I don't know because the IPsec VPN does not work. This is my setup (IPsec VPN between ASA and R2):

my network topology data:

LAN 1 connect ASA - 1 (inside the LAN)

PC - 10.0.1.3 255.255.255.0 10.0.1.1

ASA - GigabitEthernet 1: 10.0.1.1 255.255.255.0

-----------------------------------------------------------------

ASA - 1 Connect (LAN outide) R1

ASA - GigabitEthernet 0: 172.30.1.2 255.255.255.252

R1 - FastEthernet 0/0: 172.30.1.1 255.255.255.252

---------------------------------------------------------------------

R1 R2 to connect

R1 - FastEthernet 0/1: 172.30.2.1 255.255.255.252

R2 - FastEthernet 0/1: 172.30.2.2 255.255.255.252

R2 for lan connection 2

--------------------------------------------------------------------

R2 to connect LAN2

R2 - FastEthernet 0/0: 10.0.2.1 255.255.255.0

PC - 10.0.2.3 255.255.255.0 10.0.2.1

ASA configuration:

1 GigabitEthernet interface
nameif inside
security-level 100
IP 10.0.1.1 255.255.255.0
no downtime
interface GigabitEthernet 0
nameif outside
security-level 0
IP 172.30.1.2 255.255.255.252
no downtime
Route outside 0.0.0.0 0.0.0.0 172.30.1.1

------------------------------------------------------------

access-list scope LAN1 to LAN2 ip 10.0.1.0 allow 255.255.255.0 10.0.2.0 255.255.255.0
object obj LAN
subnet 10.0.1.0 255.255.255.0
object obj remote network
10.0.2.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source obj-local obj-local destination obj-remote control remote obj non-proxy-arp static

-----------------------------------------------------------
IKEv1 crypto policy 10
preshared authentication
aes encryption
sha hash
Group 2
life 3600
Crypto ikev1 allow outside
crypto isakmp identity address

------------------------------------------------------------
tunnel-group 172.30.2.2 type ipsec-l2l
tunnel-group 172.30.2.2 ipsec-attributes
IKEv1 pre-shared-key cisco123
Crypto ipsec transform-set esp-aes-192 ASA1TS, esp-sha-hmac ikev1

-------------------------------------------------------------
card crypto ASA1VPN 10 is the LAN1 to LAN2 address
card crypto ASA1VPN 10 set peer 172.30.2.2
card crypto ASA1VPN 10 set transform-set ASA1TS ikev1
card crypto ASA1VPN set 10 security-association life seconds 3600
ASA1VPN interface card crypto outside

R2 configuration:

interface fastEthernet 0/0
IP 10.0.2.1 255.255.255.0
no downtime
interface fastEthernet 0/1
IP 172.30.2.2 255.255.255.252
no downtime

-----------------------------------------------------

router RIP
version 2
Network 10.0.2.0
network 172.30.2.0

------------------------------------------------------
access-list 102 permit ahp 172.30.1.2 host 172.30.2.2
access-list 102 permit esp 172.30.1.2 host 172.30.2.2
access-list 102 permit udp host 172.30.1.2 host 172.30.2.2 eq isakmp
interface fastEthernet 0/1
IP access-group 102 to

------------------------------------------------------
crypto ISAKMP policy 110
preshared authentication
aes encryption
sha hash
Group 2
life 42300

------------------------------------------------------
ISAKMP crypto key cisco123 address 172.30.1.2

-----------------------------------------------------
Crypto ipsec transform-set esp - aes 128 R2TS

------------------------------------------------------

access-list 101 permit tcp 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255

------------------------------------------------------

R2VPN 10 ipsec-isakmp crypto map
match address 101
defined by peer 172.30.1.2
PFS Group1 Set
R2TS transformation game
86400 seconds, life of security association set
interface fastEthernet 0/1
card crypto R2VPN

I don't know what the problem

Thank you

If the RIP is not absolutely necessary for you, try adding the default route to R2:

IP route 0.0.0.0 0.0.0.0 172.16.2.1

If you want to use RIP much, add permissions ACL 102:

access-list 102 permit udp any any eq 520

IPSec vpn cisco asa and acs 5.1

We have configured authentication ipsec vpn cisco asa acs 5.1:

Here is the config in cisco vpn 5580:

standard access list acltest allow 10.10.30.0 255.255.255.0

RADIUS protocol AAA-server Gserver

AAA-server host 10.1.8.10 Gserver (inside)

Cisco key

AAA-server host 10.1.8.11 Gserver (inside)

Cisco key

internal group gpTest strategy

gpTest group policy attributes

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list acltest

type tunnel-group test remote access

tunnel-group test general attributes

address localpool pool

Group Policy - by default-gpTest

authentication-server-group LOCAL Gserver

authorization-server-group Gserver

accounting-server-group Gserver

IPSec-attributes of tunnel-group test

pre-shared-key cisco123

GBA, we config user group: VPN users. all VPN users in this group. ACS can visit his political profile: If the user in the 'VPN users' group, access ACS.

When we connect from a VPN Client to the server, all users connect to success. When you see the parser in ACS journal, each user success connect also get

error:

22040 wrong password or invalid shared secret

(pls see picture to attach it)

the system still works, but I don't know why, we get the error log.

Thanks for any help you can provide!

Duyen

Hello Duyen,

I think I've narrowed the issue. When remote access VPN using RADIUS authentication we must keep in mind that authentication and authorization are included on the same package.

Depending on your configuration, the ACS is defined as a server RADIUS (Gserver Protocol radius aaa server) and becomes the VPN Tunnel authenticated and 'authorized' on this server group:

authentication-server-group LOCAL Gserver

authorization-server-group Gserver

As noted above, the RADIUS of request/response includes authentication and authorization on the same package. This seems to be a problem of incorrect configuration that we should not set up the 'permission' in the Tunnel of the group.

Please remove the authorization under the Tunnel of Group:

No authorization-server-group Gserver

Please test the connection again and check the logs of the ACS. At this point there are only sucessful newspaper reported on the side of the ACS.

Is 'Permission-server-group' LDAP permission when authenticating to a LDAP server so to retrieve the attributes of permission on the server. RAY doesn't have the command as explained above.

I hope this helps.

Kind regards.

Is supported PPTP vpn cisco ASA 5520 firewall?

Hi all

I'm Md.kamruzzaman. My compnay buy a firewall of cisco asa 5520 and I want to configure PPTP vpn on asa 5520 firewall. Is it possible to configure the PPTP vpn to asa firewall. If possible can you please tell me what is the procedure to configure the PPTP vpn.

Best regards

MD.kamruzzaman

Sorry, but the Cisco ASA firewall does not support PPTP VPN termination.

You may terminate IPSec and SSL VPN but not of type PPTP.

If you are new to the ASA, how best to configure the supported VPN types is via the VPN Wizard integrated into the application of management of ASSISTANT Deputy Ministers.

Remote access VPN with ASA 5510 by using the DHCP server

Hello

Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

!

ASA Version 8.2 (5)

!

interface Ethernet0/1

nameif inside

security-level 100

IP 10.6.0.12 255.255.254.0

!

IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

!

Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

!

Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Crypto-map dynamic dyn1 1jeu transform-set FirstSet

dynamic mymap 1 dyn1 ipsec-isakmp crypto map

mymap map crypto inside interface

crypto ISAKMP allow inside

crypto ISAKMP policy 1

preshared authentication

3des encryption

sha hash

Group 2

life 43200

!

VPN-addr-assign aaa

VPN-addr-assign dhcp

!

internal group testgroup strategy

testgroup group policy attributes

DHCP-network-scope 10.6.192.1

enable IPSec-udp

IPSec-udp-port 10000

!

username testlay password * encrypted

!

tunnel-group testgroup type remote access

tunnel-group testgroup General attributes

strategy-group-by default testgroup

DHCP-server 10.6.20.3

testgroup group tunnel ipsec-attributes

pre-shared key *.

!

I got following output when I test connect to the ASA with Cisco VPN client 5.0

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

[OK]

KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.

Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

Kind regards

Lay

For the RADIUS, you need a definition of server-aaa:

Protocol AAA - NPS RADIUS server RADIUS

AAA-server RADIUS NPS (inside) host 10.10.18.12

key *.

authentication port 1812

accounting-port 1813

and tell your tunnel-group for this server:

General-attributes of VPN Tunnel-group

Group-NPS LOCAL RADIUS authentication server

--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

How to configure bandwidth allowed on the VPN IPSec ASA tunnels?

ASA 5505 8.2.1

ASA 5520 8.4

We currently have a tunnel set up between 2 ASAs

is 1 - possible to assign 1.5 Mbps of Bandwidth (BW) to this tunnel? Then if Tunnel number 2 is set up I could assign 2 Mbit to this one for example?

I'm not talking to prioritize certain type of traffic on the IPsec tunnel, I'm talking about Tunnel 1 to 1.5 Mbps of BW guaranteed for all traffic that passes through it. Same for tunnel 2

Then

2-How do to control the quantity of biological weapons in an IPsec tunnel?

Please provide documentation possible

Thank you

Johnny

Hello! Please consult this document:

https://supportforums.Cisco.com/docs/doc-1230

___

HTH. Please rate this post if this has been helpful. If it solves your problem, please mark this message as "right answer".

a way vpn with asa to the 800 router

people

I have a site to site vpn set up between a asa 5540 and a 800 router

I want only the vpn to be initiated from the asa with the 800 remote listen incoming connections

I know that I can define the type of connection on the asa as only come but I can find an equivalent command to answer only for the 800 remote

can anyone point me in the right direction or is it enough to simply configure the asa as are created only for this encryption card

Thanks to anyone who takes the time to answer

Hello

I recommend you configure the tunnel as a dynamic to static tunnel VPN, the ASA will be the static counterpart, so it will be the initiator and the router will never be able to establish the connection.

The ASA will be a common L2L configuration, but the router will use a dynamic encryption card.

http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a008051a69a.shtml

The PIX in the example is old, then you can simply adjust the controls to your current version, the important thing is to understand the concept.

Please let me know if that answers your question,

Thank you.

News about the resolution of a bug in the custom IOS 10.0.1 ringtones

I'm having a problem with IOS 10.0.1 and my IPhone 6 64 GB. Custom ringtones work anymore... I would like to know how many time usually needed to solve this kind of bug... Anyone know any news about this?

What about custom ringtones does not work? Are you talking about ringtones purchased from iTunes, or ringtones you created yourself? I have a long list of self-made custom ringtones on my 6 iPhone with iOS 10, and they work fine. Have what troubleshooting you tried?

I can't add/subnet mask 31 255.255.255.254 ISP WAN > static IP setting in VPN Firewall SRX5308

Hello

I can't add/subnet mask 31 255.255.255.254 ISP WAN > static IP setting in VPN Firewall SRX5308. When I try to apply it, I get the popup error message like "invalid IP subnet mask. Please enter 0/128/192/224/240/248/252 for octet 4 ". I try to add provider NTU fiber optic internet service in one of the 4 WAN settings. The vendor gave me a 31 block IP and the subnet as 255.255.255.254 mask. It is a limitation in this firewall? I have to ask the provider to give me a 30 block the IP instead? With 30 block IP subnet mask will be 255.255.255.252 who is authorized by this firewall setting. I tried this on another (SnapGear SG560) firewall and it works without any problem. See the screenshots below. Can someone please?

concerning

Ridwan

/ 31 would be used in specific scenarios where you * really * need to keep the address space and on links only point to point. To be honest I've never met anyone, or any ISP that uses it. It works on point to point, because, well, there no need to broadcast address because there are only two devices on the link (one on each side of the cable)... IP address ranges would be;. 0-. 1,.2-. 3, etc.

Most (if not all) Netgear devices will prevent you from setting 31, but you will probably be able to use without problem in all 30 cases, according to the setup of the ISP I do not think that it would cause you problems really. But if you can, I would certainly ask a 30 instead.

Certificates for IPSEC vpn in ASA 8.0 clients

Hello!

I have configured MS CA and I have setup client vpn and ASA 7.0 make tunnel with certificates.

Same configuration does not work with ASA 8.0 I get the error

CRYPTO_PKI: Check whether an identical cert is

already in the database...

CRYPTO_PKI: looking for cert = d4bb2888, digest = handle

B8 74 97 f3 bf 25 1 c e5 2nd e5 21 3rd d1 93 15 d6 |... t...%...! >....

CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND

CRYPTO_PKI: Cert not found in the database.

CRYPTO_PKI: Looking for suitable trustpoints...

CRYPTO_PKI: Found a suitable trustpoint authenticated A1.

CRYPTO_PKI (make trustedCerts list) CRYPTO_PKI:check_key_usage: KeyUsage Incorrect

(40)

CRYPTO_PKI: Validation of certificate: State failure: 1873. Any attempt of recovery

If necessary revocation status

ERROR: Certificate validation failed. Peer certificate's key usage is not valid, ser

Number of the IAL: 250F3ECE0000000009AF, name of the object: cn = xxxxx, unit of organization = xxxx, o = xxxxx, c =

XX

CRYPTO_PKI: Certificate not validated

Why the use of the key is invalid? What model of certificate must be used in MS in order to get a regular use of the key?

The schooling of CA's Terminal.

Thank you!

The cert needs to have defined Digital Signature key usage.

Don't know what models are available on MS, but it should be something like "User Ipsec" I guess.

Make 8 ASA behave like ASA 7 (i.e. disable th control on the use of the key of the cert), configure:

Crypto ca trustpoint

ignore-ipsec-keyusage

News about setting up VPN on ASA 551

Similar Questions

Maybe you are looking for