NEX 3N unable to shoot in RAW mode with lens SEL55210

Similar Questions

• Slow buffering when shooting in burst mode high with my 7DMarkii... What is the fastest SD card?

  When shooting in burst mode high with my 7 D Mark ii, I do not get optimal performance... the buffer fills up fast and backup... while I can't take shots more... I disabled the quite high definition noise reduction... Usually, I only have an SD card in the camera. I do not use the other card slot... is it because I didn't have the fastest SD card... For those of you who shoot regularly 7 D Mark ii, make it a point to always shoot with a SAndisk SD 95 map... ? I'd get better performance if I used the slot for CF card or both?

  IRIS says:

  I'm shooting with a single card (SD), a Lexar pro 64 GB 150 MB/sec Class 10 and 3 inside the U (whatever that means), but I show a limit 16 popping up on my screen... so I do not understand... I'm shooting a low ISO... I have disabled noise reduction... I'm shooting a Standard picture style... I'm shooting RAW only... My battery is charged... Then why is it backup and buffering so often? I forgot something? is it's just that the CF card is faster? .... I doh't understand why I don't get the perfromance promised high 20 + something burst shots...

  First of all, Yes, CF cards are faster.

  Second, the number you see is the current buffer and does not include the write speed of your card.

  The only way to tell what your real brightness issue is therefore to test.

  Shooting RAW to SanDisk Extreme PRO 32 GB 160 MB/s UDMA 7 CF Card, I get about 30 shots before the outbreak slows. My viewfinder shows 15.

  Note When your feature of gust of defined test cards your lens to manual focus (MF) because according to your settings of priority to focus the camera auto focus can slow or even stop your glow.

• Definition of my HS SX50 to shoot in RAW

  Having decided to try using RAW rather than JPG images, I turned to my user manual to set my Canon SX50 SH to shoot in RAW. According to the instructions from the manual, page 146, my camera seems to be missing some of the options.
  It says to press the func button, followed by JPG set / RAW but I have these options available after the adjustment knob by pressing the func key.
  I have 1) ' shot') 2 3) 4) movie setting size image format
  those are the only choices. According to the manual there should be a lot more in this menu
  Can you help me?

  What shooting mode, you are, RAW is not available in Auto, Movie Digest or mode of the sports scene.

  It is available in P, Tv, Av and M modes

• Are Canon SX50 - programming (with RAW) mode you able to review the photo after you take it?

  Just bought my camera and have carefully read the manual.  I want to work in program mode, so that I can shoot in RAW.  However, I can't seem to figure out what combo of menus and functions, I can use so that I can get a review of my photo after consider.  This feature works well in Auto Mode - but in Auto Mode, I can't shoot in RAW.  Anyone?

  Thank you

  You should be able to press the control button to the right of the optical viewfinder to view images, regardless of what you are in the mode. It does not matter if the image is so RAW or JPEG. I assume that you entered in the menu and ensures that you do not have the exam put off.

  Steve M.

• Shooting in RAW + jpeg? How can I access the RAW files after download?

  I have a Canon 70 d. I've been shooting in RAW + jpeg but only see jpeg files after downloading? How to access RAW files? I have not yet PS/LR.

  You can use the DPP software provided with the camera.

• I have problems when I shoot in raw + jpeg. RAW files seem corrupted!

  I have problems when I shoot in raw + jpeg.  It seems that the raw files get corrupted.  I shot raw without a problem.  It's only when I shoot in raw + jpeg.  Raw files will not appear in Photoshop elements.  I installed the Canon software and could see all the raw files; However, I noticed that when I tried to post some full screen they would not show.  I also noticed that these block-ish look raw files.  They appear more digital research.   Is there a specail required in RAW + jpeg map?  I formatted ones I have before their use.

  Thank you all for watching my post.  I shoot with a 60 d using Photoshop Elements 10.  Finally, I called Canon tech support and found out it was the card reader that was causing problems.  When I used another card reader, I was able to transfer the Jpeg and raw files.  They advised me to connect the camara to the computer to transfer files.  I learned to use a card reader and have for years.  It was the first time, it caused me problems.

• Sometimes, I am unable to get out of mode 'sleep'. After turning off my computer twice, he came out of sleep.

  Sometimes, I am unable to get out of mode 'sleep'. I had to close my computer twice before it went out of fashion 'sleep'

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  How to solve a problem of Mode for Vista and find a Solution

  See if the tutorial above and related links there, solves the problem.

  See you soon. Mick Murphy - Microsoft partner

• Unable to show the RAW files

  I recently bought a Nikon D750 and now I am unable to view my RAW files. I've used a Nikon D5100, who had no problem, but now all of a sudden with the change of camera images cannot be considered. Is there something that needs to be downloaded in order to view and work with them?

  Hi gordon_c,

  What version of Lightroom you have?
  You need at least version 5.7.1 Lightroom for Nikon D750 raw files access: supported by Adobe Camera Raw devices

  Kind regards

  Claes

• so everybody says shoot in RAW, BUT the Services of Web of Canon, 5.7 Lightroom and Photoshop elements 14 work really well with RAW?

  so everyone says shoot in RAW, I love shooting in RAW, it's the best format and standard,

  * However my Canon 6Ti post Canon Web Services in RAW (you'll need to shoot in RAW + JPG (up to twice the space used) and download JPG.

  * Lightroom 5.7 and 9.x RAW is not seeing or RAW support and its really clunkly in Photoshop 14?

  What is the solution?  DNG made IS supported by the Web service of Canon, 5.7 Lightroom?   I don't think so?  I know buy Creative cloud and everything will be resolved?

  Lightroom 6 IS a standalone version. Lightroom CC 2015 is the creative cloud version which includes Photoshop and is acquired by the plan of $9.99 / month. If you want to buy Lightroom 6, here is the link: products

  Lightroom is near the bottom of the page. The change you want to purchase an upgrade, please indicate that you are upgrading to version and the price will change.

• installation: my version of elements adobe 12 is unable to read the raw files from my canon 70 d SLR.

  my version of elements adobe 12 is unable to read the raw files from my canon 70 d SLR.

  You need Camera Raw 8.2 or higher.

  12 items delivered with 8.1.

  Click Help > updates to update Camera Raw

• Try to use remote desktop to connect to a computer in safe mode with networking

  I'm trying to troubleshoot a remotley pc on the network using remote desktop. I can connect properly, however, I want to continue to solve the problems with the pc remote in safe mode. When I choose to restart the pc in safe mode with network remote I am unable to connect to this computer by using remote desktop. Is there a certain config that I need to put in place inside msconfig which will restart in safe mode and I would still like access to connect to this computer by using remote desktop. Thank you.

  Hello

  @hoosier1077

  Assuming this isn't a general network problem (such as restarting changes to the local IP address on the remote computer).

  Maybe this can help.

  http://support.Microsoft.com/kb/315222

  http://support.Microsoft.com/kb/316434

• Why I can't get online in safe mode with networking? Does not start in normal mode.

  I can't get my computer starts in normal mode.  It starts only in safe mode.  I can choose the mode safe mode with networking so I can get online, but that's all... just safe mode.  Can I do to solve this problem?  I don't have a lot of money and a new computer is not an option at the present time.  Any help out there?  I have also no sound.  I tried to reinstall my windows xp, but it won't let me.  I have XP Pro and SP3.

  Hello splunk2011,

  Please contact the Microsoft Answers forum with this problem!

  After reading your post, my understanding of the issue is that you are unable to start in Normal Mode and as such, cannot be online within Mode safe mode with networking.

  Because we can start in Mode safe mode with networking, this tells us that a driver or a program from loading at startup may cause the problem.  To solve this, I would try a clean boot.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve your problem.

  Best regards

  Matthew_Ha

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating