Next Silide help

Similar Questions

• timer before the next frame help

  Hey guys, is there a way to drop an timer in this function so that he'll wait 2 seconds before going to the q2?

  function completed1(e:DisplayObject):void

  {

  If (l3.y == h1.y & & l8.y == h2.y & & l7.y == h3.y & & l16.y == h4.y & & l1.y == h5.y)

  {

  gotoAndStop ("q2");

  }

  on the other

  {

  }

  }

  function completed1(e:DisplayObject):void

  {

  If (l3.y == h1.y & l8.y == h2.y & l7.y == h3.y & l16.y == h4.y & l1.y == h5.y)

  {

  var t:Timer = new Timer (2000,1);

  t.addEventListener (TimerEvent.TIMER, f);

  t.Start ();

  }

  on the other

  {

  }

  }

  function f(e:Event):void {}

  gotoAndStop ("q2");

  }

• HP Officejet Pro 8600 continues to read printer off line even if hard wired - help!

  I'm unable to print on my HP Officejet Pro 8600.  It will not print wireless so I wired with an ethernet cable.  Printer says offline.  What to do next?  Help, please!

  Finally got it working today.  My son-in-law the fixed.  He said, he said offline, because the network was not see an IP address from the wireless printer.  Basically, he opened the printer HP Officejet Pro 8600 dialog box and clicked on add a printer and re-installed.  Thanks a lot for your help.  I hope this can help someone else in the future.

• Cloud creation help / App will not open. Progress wheel rotates continuously.

  I did everything on the list. I tried to download the updated version and still no resolution that this problem. What's next? Help, please.

  Solved problem with online support.

  Thank you.

  Shawanda

• Lightroom CC hangs at each export.  Help, please

  I recently upgraded to Lightroom CC and updated my video card.  Now, whenever I export, regardless of settings, my computer crashes (I think) when exporting.  It will export usually of 10 to 15 images and then crash.  It does not crash on specific images.  If I export even twice, it will crash on a different image each time.  I say that I "think" it crashes, because the screen turns off, then mouse stops working, but it seems that the computer is turned on and windows is not connect a crash.  There is nothing interesting in the system logs.  I disabled all plugins, and I tried activating / deactivating the GPU settings.  I am at a loss on what to do next to help out.  Help, please!

  I think I solved my problem, and it was not lightroom.  It was my PC.  I ran Prime95 to stress test my CPU, and I got exactly the same problem, computer off without reason.  That tells me that this problem is independent of LR.  It seems that the export of LR has been overload my CPU and PC downtime.  Maybe overheating.  So, I played around with the BIOS settings and managed to get a working config... until now.  I also replaced my power, thinking that the old 400W one was not powerful enough for my new video card.  For me, I think it was actually the BIOS config, that solved the problem.  I hope help you.

• Please connect a supported device. Help please?

  I have a Dell N5110 with Windows 7 Home Premium 64-bit and webcam is integrated. I also tested with an external USB webcam, but I get the same results.

  So far, I have uninstalled/reinstalled the webcam, drivers updated and tried the regedit fix posted by Igor on the link below.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/c8f56336-2fcf-4103-AC19-2f30ab5578b6/

  I did a clean boot, checked for programs that can use it, but aussient Task Manager to control the Process Explorer. In addition, I don't have the facial recognition software installed, which I know can be a problem.

  The error in the title appears when you open Dell Webcam Central and Skype. To testmycam.com, I get a blank white screen.

  HOWEVER, when I run the Webcam Diagnostics on the link below with the 64-bit parameter, the light of my webcam and it works!

  http://www.FiveSign.com/downloads/program/webcam-Diagnostics_29430_1.html?affChecked=1

  I've never had a problem with my webcam with one of these until a few weeks ago and I can't think of any significant changes I made to the system since then. I'm a little confused on what to do next, any help would be appreciated. Let me know if more information is needed, I'm sure I've forgotten something. Once again thanks in advance for any help.

  Thanks for the help. I decided to restore my system to factory default, after saving my files on an external drive, of course, and the webcam now works well.

• AppStore does not download some apps

  I have a problem when trying to install some, not all applications on the Mac all the store. Specifically Todoist and Fullcontact

  Both were previously downloaded and installed via the Mac app store then deleted, the question of trying to reinstall door the same day and time. When I try to down load and reinstall from purchases (both are free) page of the app store download process starts very well but just before finishing I get this error message. "Todoist: to do list | "List of tasks could not download - use purchases page to try again" if I try again I just going round in circles. then error message in red against the app 'an error occurred' after the flags of app store if it linked to just the one app, I think that it is a problem with the developer, but it's not. Subsequently, I deleted some apps and reistalled them very well from the app store.

  Before that everyone is a little enough to answer Ive tried this after a search on the internet on the problem.  Delete all preferences and cache in connection to the app store all old preference for the im apps try to reinstall. Signed in and out of the appstore. interestingling both missed apps remain listed with their error message after I registered. Reset warnings etc in Itunes. The key here is that the incident relates to a specific time when I was using my macbook so I'm looking for the "nuke appsore" button if someone is willing to tell me where he is.

  Thanks for any help

  Stephen

  Hello Stephen,

  Thank you for using communities of Apple Support.

  From your post, I see that you are unable to update two specific applications from the Mac App Store.  Given the previous troubleshooting you have already completed, the next step, I would like to is to delete cookies from the Mac App Store itself.  To do this, you need to enable the debug menu by entering a Terminal command:

  1. Click on the Finder on your Dock icon
  2. Click OK > utilities > Terminal in the menu bar
  3. Copy the line below, paste into Terminal, and then press ENTER:defaults write com.apple.appstore ShowDebugMenu -bool true

  4. If the Mac App Store is open, close it and then the stimulus

  5. You'll see the Debug menu next to help in the menu bar

  In the Debug menu, select 'Delete the Cookies' and then close and restart the Mac App Store.  If the issue is resolved, then you will follow the previous steps for terminal, except for changing the Terminal command to:defaults write com.apple.appstore ShowDebugMenu -bool false

  Take care.

• Two backup machines, we work, we have no

  Another experience of hair pulling. I noticed that my MacBook Pro had not saved for several days. A few days later, I tried to understand why. I have failed and need help/guidance. I think he started his problems after I installed 10.11.4, but I can't be sure.

  Apple Time Capsule (APTC), iMac connected cable, MBP connected by cable. The two machines running 10.11.4. APTC guests wi - fi, but turned off on both computers.

  Network settings on the computers look identical.

  APTC can be connected to the internet or not. Same results.

  On both machines, I can copy (drag / move) a file/folder of the APTC partition in the finder, and it happens immediately.

  iMac backup normally, from one day to the next, with no problems.

  MBP prepares backup (30 GB - don't know why, it's this great) for two hours and began transmitting at a pace I calculate will take 5-10 days to complete.

  I have:

  -Run the MBP disk utility, corrected some errors found, now clean tracks

  -Reinstall 10.11.4 the combo charger

  -people with mobility reduced/removed various demons/startup process that seem like they may interfere

  -no antivirus program

  -check the console as backup log starts and progresses, and don't see anything that stands out

  -Manual backup with time machine power, both exhibit the same slow performance.

  Seems to boil down to Time Machine somehow, since all the other communal work. I turned TM, then turn it on again, re-slected my backup drive; There seems to be little to do with it.

  I don't know where to go from here - what to try next. Help?

  Ben

  You have tried most of what I would say.

  It's time for the big guns... Delete the backup... and reset TM, and start over.

  I don't know why it's necessary, but it is. TM just gets stuck and no response.

  As ways to work around the problem without taking major measures.

  Plug a USB on the MBP and TM allows to make a local backup... If it works fine, it proves several things... most TM works, just not to the objectives of the network.

  If you upgraded the MBP several times... make a NVRAM and reset the SMC... It can help.

  Finally I would buy Carbon Copy Cloner and use it. It is simply much more reliable than TM, if not quite as competent in the management of incremental backups.

  I use CCC and TM... I think that there is a good place to use both.

• Can not download and install Firefox 12. Download faints before that I can install it.

  I do everything I'm supposed to do, by selecting Save, then run, etc. I get no error message. When the download process is almost finished, I get a message on the issue of whether I am allowed to install it or not, then I select the icon administrator, since I am the sole owner of this PC. I read about it in another forum on the problems of downloading or installing Firefox, and as I understand it, that's what I'm supposed to select.

  After you make this selection, what little information soon disappears, however no more with things to tick boxes appear after that. Then, the whole process seems to stop for some strange reason.

  I've been on Google Chrome until yesterday and switched back to Firefox - I moved back for long periods at a time, for various reasons, but this is ridiculous!
  Please help me.

  Twiglet,

  I'll try to guide you through 2 different methods for updating Firefox, hopefully one of them will work:

  Method 1:
  Go to the on the Firefox window. You can find it by clicking Help, then "about Firefox", or by clicking on the Orange button that says "Firefox" in the upper left of your Firefox window, by clicking on the arrow next to 'Help' and then clicking on "about Firefox". You can check the latest version here. Also, when you open this window, he should check updates and if an update is available, begin to download the.

  Method 2:
  Open Internet Explorer. Go to www.getfirefox.com. Click the big 'Download Now' button. Then, click Run. give him all the permits, he asks that it installs. It should update your Firefox to the current version.

  Firefox updates automatically, but releases are sometimes limited, which means after that a number of people have updated, the update is not automatically pushed for a few days to make sure that no major problems.

• From updateing to 8.1 WIndows printer problems

  Until I updated to Windows 8.1 other months everything was going well on my new laptop, then I went to something of my HP Photosmart B109n scan and it did not work because the pilot was now missing and the application that replace the HP printer driver HP is useless.

  On the advice of the HP site, I tried to download the new driver, but it wouldn't go, he said I had to remove the exsisting installation but when I try it just reboots the computer, but is still there afterwards. It turns out the uninstall has disappeared from the current and installation does not appear in the installer I downloaded.

  As a last resort, I used the system restore but has not only the printer has not changed but now some pre-loaded apps will not work and ask to renew the license of developers.

  I'm a lost what to do next - please help!

  Your laptop is not known to me, but in the case of update 8.1 Win, you should check this update from Toshiba to win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/

  There you can check if the Win 8.1 is supported on your laptop and how to perform the Update step by step for Windows 8.1
  Some drivers must be uninstalled and updated after installation of update 8.1 to win!

  Regarding your printer problem:
  Each manufacturer of the printer contains own drivers for the Windows System.
  We don't know me if HP released Win 8.1 compatible drivers for the printer Photosmart B109n clean, but to be honest, this problem is not related to the Toshiba laptop. If you have problems using HP printer under 8.1 to win, you should visit the support page of the printer manufacturer for troubleshooting tips and workaround solutions.

• Toshiba 56' WH08b no longer works

  Hello

  Can anyone help?
  My rptv died just the red light is on, but when I press the remote power button normally it is a small whoos sound & light screen sources up
  But now sweet fa happens.

  I tried a new remote control, pressing the local buttons, but nothing.
  I know that it is pretty old but I got it again & it has had very little use because it is located in a room that is rarely used.

  I took off the coast but I'm at a loss of what to do next, any help would be greatly appericated I'm an electrician by profession so have meters etc but do not know where to test.

  To be honest mate, if the TV is dead and cannot be turned on, then you must buy a new TV.
  If the warranty is not valid, this isn't a value for repaired do since new parts cost more than a new TV

• 6210 the NPT recognizes cartridge

  My HP6210 does not recognize HP 338 black cartridge. I cleaned the contacts but still does not. Someone at - it ideas?

  The cartrdige the 6210 uses depends on the region, it was sold in.  See the following link.

  To the original poster than next can help.

  Also, please indicate what error message you encounter.

  Kind regards

  Bob Headrick, MS MVP printing/imaging

• Portable photo transfer Pavilion

  Laptop will not recognize HP camera connected by USB, camera about 4 years, for laptop new windows 8.1

  Hello

  It is a very old camera actually, at least by designed. Hope the next update helps:

  http://www.solvusoft.com/en/download/DriverDoc/HP _ (Hewlett_Packard) _Photosmart_733v_Driver_Update_01 - 2014.exe

  Please install the update on your computer.

  Kind regards.

• I was referred to this site. Problems with installing Windows on the new drive.

  Greetings!

  I just installed a new hard drive on my Mini 311 1037. I bought the HP recovery discs. The operating system is Windows 7 Home Premium (I guess it was the correct operating system for that computer). The installation seemed fine, but after installing the drivers, I get the message, "Windows Setup could not configure windows to run on a hardware on this computer."  Then after the restart, after the initial windows screen, I get a message that says "Windows cannot complete the installation. To install Windows on this computer, run the Setup again. "I atempted to iireinstall 3 times. All diagnostic tests are good: the hard drive, the memory. I have no idea what to do next. Help, please?

  If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

  Links to downloads of Windows 7 ISO files:

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Use the installation of Windows 7 USB/DVD tool to convert the ISO file you download. Link and instructions below. You need to a DVD + R or DVD - R. Or a flash drive 4 GB to use the USB method.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool#installation

  Use 25 characters on the COA key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then, go to the page support and driver to install the drivers you need.

• Viewer windows 8

  Good day all

  I'm trying to connect my old hp psc 2210 to use as mainly as a scanner. Running HP diagnostic and said that it is common icating correctly, etc. But seems to be nothing else on my laptop to see the scan. And on the scanner, it says Email, wordpad, photo gallery and image of HP and since years and a used desktop computer then I am at a loss what to try next, any help would be appreciated thanks

  Hello JohnFla,

  Welcome to the HP Forums! I understand your concerns. How is the printer connected? USB or wireless?

  What is your operating system on your computer? Windows.

  I'll provide you with a document from HP on How to digitize. Please choose your appropriate operating system.

  If you are missing the scan options, then please follow this HP document to a 'no. Scan Options' or "scan settings are not defined" Message displays on the all-in-one.

  Impatience on your part.