Nexus 5000 ports do not convert in Ethernet

Greetings. I'm trying to convert Ethernet ports 17-24 of FibreChannel. However, when I run the following commands, this is what happens:

 Aero5K(config)# slot 1 Aero5K(config-slot)# port 17-24 type ethernet ERROR: Invalid Port Range specified

Here's the relevant current config. I hate usually pasting configs, but in this case, I want to give the answering machine the best chance to tell me my problem.

 version 7.0(5)N1(1) feature fcoe hostname Aero5K feature telnet feature interface-vlan feature lacp feature lldp slot 1 port 17-32 type fc slot 2 vrf context management vsan database vsan 11 name "fabric_aero5k" fcdomain fcid database vsan 11 wwn 50:06:01:60:36:e0:11:66 fcid 0x008400ef dynamic vsan 11 wwn 50:06:01:68:36:e0:11:66 fcid 0x008401ef dynamic interface Vlan1 interface Vlan100 no shutdown ip address 10.0.100.9/24 vsan database vsan 11 interface fc1/17 vsan 11 interface fc1/18 vsan 11 interface fc1/19 vsan 11 interface fc1/20 vsan 11 interface fc1/21 vsan 11 interface fc1/22 vsan 11 interface fc1/23 vsan 11 interface fc1/24 vsan 11 interface fc1/25 vsan 11 interface fc1/26 vsan 11 interface fc1/27 vsan 11 interface fc1/28 vsan 11 interface fc1/29 vsan 11 interface fc1/30 vsan 11 interface fc1/31 vsan 11 interface fc1/32 interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 no shutdown interface fc1/32 no shutdown

I guess you had ports slot 1 Ethernet 1-16 and 17-32 FC ports!

Now you want ports 17-24 to become Ethernet as well.

That's why you need

 port 1-24 type ethernet

Tags: Cisco DataCenter

Similar Questions

  • My Ethernet port is not running iMac mid 2011. Pls help me.

    Hi, I have an iMac 21.5 "mid-2011. My Ethernet port is not working. Is this a software problem? Pls help me.

    Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

    Try another ethernet cable.

    He still does not? A report with the information more wrote an effective communities of Apple Support question

  • Ethernet LAN NB200 port is not detected

    Hello world

    I think I have either disabled or deleted the ethernet LAN on my NB200 to remove it from the system tray. (I can use WiFi integrated for networking and access to the internet or an external Bluetooth adapter with my Telstra Next G phone as a modem.)

    Now, I want to activate and use the ethernet port, so I can connect to an old - ish computer using a crossover cable to copy a bunch of files, however I can not the LAN ethernet works again. I tried several times to add hardware and uninstall/reinstall the driver (downloaded from this site), reboot, & etc. without success.

    Any tips or suggestions? Has anyone seen a similar problem before?

    Thank you very much!

    Kind regards
    Daniel

    If she is there, she is disabled? If yes then you can activate it. Right-click on it and select enable from the list.

  • Configure ports on Nexus 5000/2000 for the grouping of network server adapters

    Hello

    I have two Nexus 5000 and Nexus two, 2000.  The 5000 s are peers of vpc.  I would like to connect my server with cluster NIC in a port on each 2000 and all have both be active.  Is this possible?  What are the steps?  I thought it should be this:

    CPR_NEXUS_5K01 (config) # int eth100/1/32

    CPR_NEXUS_5K01(Config-if) # channel - group 32

    CPR_NEXUS_5K01 (config) # int eth101/1/32

    CPR_NEXUS_5K01(Config-if) # channel - group 32

    on the Nexus two.

    Thank you, Jerry

  • Ethernet port, audio port works not

    Just buy new motherboard Asrock g41-mvs3 R2, all things work well, but the ethernet port and audio port works not!  Help, please!

    Hello

    1. you receive an error message?

    2. What is the brand and model of your computer?

    3. in Device Manager, is there a yellow triangle on the elements that don't work?

    4. the Device Manager reports features like work or does it actually say there is a problem with the devices you listed?

    Please provide us with more information so you will help more. See this link:

    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

    See the following link for more information.

    Open the Device Manager

    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  • Using SNMP to monitor Cisco Nexus 5000

    Hello

    I would like to know what specific OID to use to monitor the following using SNMP on a Nexus 5000:

    -L' total CPU usage

    -Power supply status

    -Status of Fan chassis

    The Nexus is quite different from other devices Cisco - any help will be appreciated!

    CPU: oid to use is: 1.3.6.1.4.1.9.9.305.1.1.1 (cseSysCPUUtilization) is a part of the MIB:

    CISCO-SYSTEM-EXT-MIB

    It displays the value as a percentage of the processor.

    ME-TestBed-A (nxos) # display system resources

    Load average: 1 minute: 0.26 5 minutes: 0.41 15 minutes: 0.43

    Process: 393 1 total, running

    CPU States: inactive user of 1.0%, 4.0% of the kernel, 95.0%

    Memory usage: total 3634820K, 1728600K used, 1906220K free

    81256K buffers, 1037176K cache

    DHCP-171-69-89-49: ~ lulu-mbp$ snmpwalk - public - Cabarrus 2 c 172.25.180.5

    1.3.6.1.4.1.9.9.305.1.1.1

    SNMPv2-SMI::enterprises.9.9.305.1.1.1.0 = Gauge32 : 5

    As you can see, show sys resources indicates 95% idle, valuation is 5% cpu and the snmp poster value.

    -------------

    Power and Fans, it is fairly limited

    The cisco mib envmon is not yet supported on the 5K, looks like.

    This leaves us with the FRU mib: 1.3.6.1.4.1.9.9.117 ftp://ftp.cisco.com/pub/mibs/oid/CISCO-ENTITY-FRU-CONTROL-MIB.oid

    The index values will come from oid: entPhysicalTable)

    1.3.6.1.2.1.47.1.1.1) is part of the ENTITY-MIB

    DHCP-171-69-89-49: ~ lulu-mbp$ snmpwalk - public - Cabarrus 2 c 172.25.180.5

    1.3.6.1.4.1.9.9.117

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.470 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.1000470 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.470 = STRING : « CentiAmps @ 12V »

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.1000470 = STRING : « CentiAmps @

    12V.

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.470 = INTEGER : 4538

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.1000470 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.470 = INTEGER : 29

    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.1000470 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.22 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.23 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.470 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.1000022 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.1000470 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1.3000022 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.22 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.23 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.470 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.1000022 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.1000470 = INTEGER : 4

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.3000022 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.22 = ENTIER :-2910

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.23 = INTEGER : -83

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.470 = INTEGER : 29

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.1000022 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.1000470 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.3.3000022 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.1.3.0 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.22 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.23 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.1000022 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.1.3000022 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.22 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.23 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.1000022 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.2.3000022 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.22 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.23 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.1000022 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.3.3000022 = INTEGER : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.22 = Timeticks : 0:00:10.27 (1027)

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.23 = Timeticks : 0:01:25.20 (8520)

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.1000022 = Timeticks :

    (41634711) 4 days, 19:39:07.11

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.4.3000022 = Timeticks :

    (41634712) 4 days, 19:39:07.12

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.22 = Timeticks : (0) 0:00:00.00

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.23 = Timeticks : (0) 0:00:00.00

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.1000022 = Timeticks : (0)

    0:00:00.00

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.5.3000022 = Timeticks : (0)

    0:00:00.00

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.22 = « »

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.23 = « »

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.1000022 = « »

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.6.3000022 = « »

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.22 = Gauge32 : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.23 = Gauge32 : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.1000022 = Gauge32 : 0

    SNMPv2-SMI::enterprises.9.9.117.1.2.1.1.8.3000022 = Gauge32 : 0

    SNMPv2-SMI::enterprises.9.9.117.1.3.1.0 = ENTIER : 1

    SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.534 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.535 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.536 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.4.1.1.1.537 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.10 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.22 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.23 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.149 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.214 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.215 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.278 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.279 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.342 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.343 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.470 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.534 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.535 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.536 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.537 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4950 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4951 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4952 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4953 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4954 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4955 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4956 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4957 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4958 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4959 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4960 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4961 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4962 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4963 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4964 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4965 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4966 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4967 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4968 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.4969 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5206 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5207 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5208 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5209 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5210 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5211 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5212 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.5213 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21590 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21591 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21592 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21593 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21594 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21595 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21596 = INTEGER : 2

    SNMPv2-SMI::enterprises.9.9.117.1.5.1.1.1.21602 = INTEGER : 2

    You can read in:

    FTP://FTP.Cisco.com/pub/MIBs/v1/Cisco-entity-FRU-control-MIB-V1SMI.my

    that means values integer by OID.

    Take for example (look at the file

    ( ftp://ftp.cisco.com/pub/mibs/oid/CISCO-ENTITY-FRU-CONTROL-MIB.oid)

    cefcFRUPowerOperStatus: 1.3.6.1.4.1.9.9.117.1.1.2.1.2 for one of the

    index:

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.22 = INTEGER : 2

    We now need to find 22-year-old:

    SNMPv2-SMI::mib-2.47.1.1.1.1.7.22 = STRING : « 20 port 10GE SFP + / superviseur

    in the Module fixed-1"

    That means now the INTEGER 2 from:

    SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2.22 = INTEGER : 2

    Lets look at: CISCO-ENTITY-FRU-CONTROL-MIB-V1SMI.my, section

    cefcFRUPowerOperStatus, if you are looking for in this file you will find: we (2),

    That measn this controller is actually turned on and powered.

  • Nexus 5000 operating as a standalone FibreChannel Switch

    Hello world

    Does anyone know if the Nexus 5000 can be used as a standalone FibreChannel Switch? Which means I don't want to run NPV on this and connect it up to a MDS or a different type of switch FibreChannel. I'm looking to create a 'Pod' scenario. Where a few servers and a storage Bay would hang the 5K on a login F_Ports is local FLOGI DB and be able to use zoning and traffic went immediately from the 5K, etc etc? I know that 5 K is not a full blown fibre channel switch such that it has some limitations, but again I think to a "Pod" as scenario.

    If the script above won't work for some reason any using CF can achieve us with FCoE CNAs on servers & storage Bay?

    Finally, FC domain IDS how 5 K can cause?

    Sorry for the questions. I'm new to SAN switching at this stage.

    Thank you all!

    Yes, it works even FC code NX - OS like a switch MDS switch.

    You connect FC HBAS, ports SAN or FCoE CNAs to Nexus.

    However, you need to license storage.

    Nexus 5010 supports up to 8 4 G FC or FC G 6 8 ports with the expansion module

    Nexus 5020 supports up to 16 4 G FC or 12 8 G FC ports with the expansion module

    Nexus 5548UP supports up to ports FC 32 4 / 8G without the expansion module

    Nexus 5548UP supports up to 48 4 FC ports / 8G with the expansion module

    Nexus 5596UP supports up to 48 4 FC ports / 8G without the expansion module

    Nexus 5596UP supports up to 96 4 FC ports / 8G with the expansion module

  • The WAN Port is communicating with the Ethernet switch?

    I have a Comcast gateway that the router is disabled in so it acts only as a modem. This is related to an Airport Extreme, which serves as my router via the WAN on the AE port. I created a different WAP with a Capsule temporal from the airport, located downstairs with an Ethernet cable from one of the Ethernet ports on the AE to the WAN on the TC port. I think it's what we call a 'roaming network.

    My question is, can I connect my switch Gigabit 8 ports in one of the Ethernet ports on the TC to complete connections wired to all devices connected on it, or should I first connect EI to the switch 8 ports and then connect the switch to the port WAN TC to complete my network "roaming"? In other words, plug it into the port WAN AE or TC still allows you to use other Ethernet ports as a switch?

    Thank you!

    can I plug my Gigabit 8 ports switch in one of the ports Ethernet on the TC to complete wired connections to all devices connected on it

    Yes, assuming that the TC has been configured to run in Bridge Mode, which would be normal.

    or should I first connect EI to the switch 8 ports and then connect the switch to the TC WAN port to complete my network "roaming"?

    It would be considered preferable to wiring, if it is convenient to do so.  For example, in the configuration of the wiring in the previous example just above... If there is a problem with the time Capsule, then all devices connected to the switch to the time Capsule would have a problem as well.

    If the switch is connected to the AirPort Extreme, and the TC is then connected to the switch... If the TC has a problem, the other devices connected to the switch of will not be affected.

  • Re: Laptop not recognized on Ethernet to the router

    Hello

    I have a similar problem with an old book.

    HOST:
    -Laptop: Asus l3d
    -Equipped with a card: SiS 900 PCI Fast Ethernet Adapter
    -OS: Ubuntu server 14.04
    ROUTER:
    -Router: Netgear DGND3700v2 Firmware Version 1.1.00.24_1.00.24

    Parameters:
    -Laptop computer with the static IP.
    -Router with dhcp disabled.

    -----------

    QUESTION:
    The liaison between NB and Netgear ethernet works for some time. Exactly, the Netgear does not recognize the cable, plugged into the ethernet port on the router (called internal switch) of the ethernet of Brunswick.

    I'll try to explain it in a few steps:

    STEP 1: With everything well adjusted and connected the cable. If I start the NB and the router, the result is no connection, no ping and LED light for the no router port.
    Note: to the page web of the management of the router, I read that 4 ports (LAN1, 2, 3, 4) are not used.

    ... but...

    STEP 2: Now, with everything working, I play with one of the two ends of the cable (any of the two). Slowly, I Plug and unplug the cable into the ethernet port, a few times until the router port light. BRAVO! NB and Netgear are connected. There is a ping. All works until the next reboot of Netgear or NB
    Note: to the page web of the management of the router, I read that a port is used.

    STEP 3: While all the work normally. If I unplug the cable and I connect again, making this action at normal speed, the connection does not work as STEP 1. The only way to have a working link is to repeat the procedure in STEP 2.

    -----------

    I did a lot of testing, for example:
    -test NB, but work very well with other routers, AP NB, switch.
    -test the router, but the work of Netgear very well with the other PC.
    -change the cable.
    -on the NB to update the drivers.
    -on the NB, disabling auto-negotiation and manual setting.

    I think that in my case, the problem is the internal switch of the router. But it is a hypothesis.

    Thanks for any help.

    Hello Salvatore111

    Product Netgear do not officially support Linux so it could be just a strange problem with the drivers on the NB does not speak with the router.

    DarrenM

  • HP Officejet 8500 printer A909b does not connect to ethernet wired network.

    This is my first time on a forum & I am hopeing for some successes my network with printer setting

    .

    I am networking two PC Win XP, SP3, running with a printer Officejet 8500 A909b via a Netgear router.

    Previously, I had the printer connected by USB to a PC as needed with no problems except having to change the USB between PC to print.

    I tried several times to uninstall and reinstall the printer software, disabled the firewall & Anti virus, reset the router, reset the printer network settings & them restarted everything with no success.

    I printed the network configuration page & tried to enter the address EWS (http://0.0.0.0) in the browser Web without success either.

    I found the lights on the printer on the ethernet port does not at all & tried four different ethernet cables all work elsewhere. I tried all four ports ethernet to the router also.

    Thanks in advance for any help I receive.

    Concerning

    Allan

    Hello

    As network lights are not flashing when the cable is connected and the PC works with the same cable, which seems to be a faulty network card defectueuse on printer, please contact HP and they should be able to help in this regard.

  • new port could not be created. : Windows XP 0000

    After you install a MX870 on my wireless network, I installed the drivers from Canon, etc.. The Canon program detects the printer on the net and when I click on connect, I get the message "new port could not be created.: 0000"

    It comes to my office, connected to my router by ethernet. Everything else works OK. I have connected my loptop using the same software but thru the wireless connection and it prints well. I also have an old printer connected to a port of regular printer to my desktop.

    I use XP 32. Its current on updates.

    Help, please.

    Hi JimMathis,

    Try the steps mentioned below and see if it helps.

    (a) click on the Start menu , and then click Printers and faxes

    Right-click on the printer Canon MX870 b), and then select Properties

    (c) go to the Ports tab and make sure the Canon BJ network port is checked.

    Note: If Canon BJ network port is not checked then you will need create the port.

    (d) click on Add Port> button and select the type of "Canon BJNP Port".

    (e) the Canon MX870 printer will be automatically associated with this new port.

    (f) click OK

  • Frames in Nexus 5000

    Hello:

    We have 2 Nexus 5000 Switch with n5000 - uk9.5.0.3.N2.2.bin system image file.

    2 Nexus divided in 2 centres and directly connected.

    In each of the switches, there is an Oracle server. These Oracle servers are grouped and connected by a link of heartbeat.

    The Oracle administrator ask us to set up frames in the heart rate.

    How can I do this?

    Thank you!!!

    All you have to do is put this configuration on all your 5ks nexus:

    Switch (config) #type of policy-map network-qos jumbo

    Switch(config-pmap-NQ) #network-qos default class type class

    Switch(config-pmap-c-NQ) #mtu 9216

    Switch(config-pmap-c-NQ) #exit

    Switch(config-pmap-NQ) #exit

    Switch (config) #qos system

    Switch(config-sys-QoS) #jumbo qos network type of service-strategy

    This will allow wide global capacity jumbo frame.

    To check if it works, do a "show int eth x / y", if you see Configuring jumbo rising and packages are not walked on, his work.

    Also note that the mtu will not change on the interface itself, it's a global command, not an order "by interface. But it's ok, even if mtu 1500, says it can still accept frames if you have applied global config.

    Example:

    Ethernet1/1 is on the rise

    ...

    RX

    0 1221713 packages 2644 multicasts packets broadcast unicast packets

    packages of entry 1224357 91236171 bytes

    ---> 458 jumbo packets 0 packets of repression storm

    short frame overflow of data entry error 0 Giants 0 0 0 0 against the imbedding

    0 0 surveillance so to the bottom of the fall

    0 entry with dribble 0 rejection of entry

    Rx pause 0

  • Nexus 5000 native FC disk array and tape library

    Is it possible to have servers to connect by FCoE to nexus 5000 switches as well as native berries FC of attached disk and tape library without requiring additional CF as the MDS 9000 switch? The reason why I ask, is that all the patterns I've seen on consolidated IO to this point show switches connected to the FC ports native on the nexus 5000 MDS. I thought that the Nexus 5000 would be able to replace the MDS attaching devices FCoE and native Fibre Channel devices. You see only such a diagram has me second guessing my initial thought.

    Yes, you can use FCoE and FC of Nexus 5000 to connect to networks. I tested and it works very well without any problems.

    FCoE, you have module FCoE in the bays and the appropriate license.

    RAM

  • groups of IP addresses are supported on Nexus-5000 and models down?

    Looking online, I see the ip address of the object-group is explicitly listed as

    supprted on Nexus 7000 but on other model documents command is confusing.

    For example, for Nexus-5000 references to IP address source/destination to refuse the order group objects exist in the documentation older versions of NX - OS 4.0 and 4.1 (with no explicit object-group command is listed in the same CLI reference) but in v5.x current source/destination shows no Group of IP addresses as available choice.

    Can one with access to the Nexus 5000 or 3000 check if the ip address of the object-group is an order valid on this platform?

    It seems full support (like on IOS), using the IP address groups was established in v6 NX - OS (which only works on platform 7000).

    There was also presented on the lower models?

    Thank you.

    Hi Alexandre

    This feature is not currently supported on N5k/N3k

    If you have specific requirements for this feature, please join your team has to describe your network design. And they will be able to help you.

    HTH,

    Alex

  • Connectivity HP C7000 and Nexus 5000

    We spend our ESX servers in a rack mount environment at C7000 enclosures with blades. Can someone talk about compatibility box blade HP and Nexus 5000? The little that I find seems to suggest that this match may not be 100% ready for primetime.

    I have a HP Virtual Connect modules or exactly what FCoE lokks like with HP blades. Does anyone have more information on this specific vegetables or aware of this configuration, used successfully?

    There is full compatibility between the HP 7000 and the Cisco Nexus 5000.

    What you need to make sure if it is that you are up-to-date with all HP firmware and drivers Nic ESX.

    Take a look on my blog that goes into this in detail:

    http://www.wooditwork.com/2010/08/09/Flex-10-ESX-pre-requisites/

    http://www.wooditwork.com/2011/02/17/Flex-10-ESX-design-with-simplicity-and-scalability-part-1/

    http://www.wooditwork.com/2011/02/17/Flex-10-ESX-design-with-simplicity-and-scalability-part-2/

    http://www.wooditwork.com/2011/02/18/scripting-Flex-10-ESX-design-with-PowerCLI/

    http://www.wooditwork.com/2010/10/19/HP-Virtual-connect-for-the-Cisco-network-administrator/

Maybe you are looking for

  • Why can't I download Firebug?

    I tried 6 times to download Firebug. He continues to tell me that the add-on could not be installed because it seems to be corrupted. What can I do to get it downloaded? I have the version 20.0.1

  • Contacts to recover deleted in iCloud

    By chance, I deleted all my contacts to iCloud. How can I get back them?

  • Satellite A205-S4777: are there problems of compatibility of the 320 HARD drive

    I am replacing my sata toshiba with a sata western digital with more memory than he.Can someone tell me if there are known compatibility problems. Toshiba 200 GB Sata Drive broke down and I am substituting a western digital 320 GB SATA

  • OfficeJet Pro 8600: questions printerhead

    I suddenly got a message on my printer screen: "there is a problem with the ink system. Turn the printer off then on (I also unplugged it, but which did not help). If it persists, call HP. "It did not work, so the next step was to remove the printerh

  • merge several *.dat files in a single *.dat file

    Hallo, I have several measure *.dat files. How to merge files it is to have one file? I want a *.dat file can be traced graphic. Should I create a separate vi? Or Must use addons toolkit in labview? Please help me... Thank you respect, Chaoui