NFS datastore on does not create the thick disk

Similar Questions

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• Installation of Oracle 11 g R2 grid does not detect the ASM disks

  Hi guys,.

  I'm trying to install Oracle 11 g R2 RAC and as part of the installation of the grid, the Setup program does not detect the ASM disks.

  Here are the outputs for some commands.

  [root@rac1 ~] # oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  Instantiation of disk 'ASMDATA2 '.

  Instantiation of disk 'ASMDATA1 '.

  [root@rac1 ~] # oracleasm listdisks

  ASMDATA1

  ASMDATA2

  [root@rac1 ~] # ls - ls/dev/oracleasm/disks

  Total 0

  0 brw - rw - 1 grid asmadmin 252, 3 14 May 17:18 ASMDATA1

  0 brw - rw - 1 grid asmadmin 252, 2 14 May 17:18 ASMDATA2

  I already tried to reconfigure Oracleasm (oracleasm configure - i) but no luck.

  I would be really grateful for the help here as its been a few days now and want to complete the installation as soon as possible

  Concerning

  Praveen

  Thank you Ricardo, I see now the disks after you change the path from discovery to/dev/oracleasm/disks

  

• RunInstall does not show the ASM disks

  Hello

  I googled arleady for so long but I can't find the solution for my problem.

  I'm under runInstall of the Oracle Grid Infrastructure installation program. When it comes to "Create the ASM disk groups", the window does not show one of my starts created previously, even if I change the discovery trail to ' / oracleasm/dev/discs / * "Please help!

  [dev root@grid1] # / usr/sbin/oracleasm listdisks

  DATA01

  DATA02

  FRA01

  FRA02

  OCRVOTE01

  OCRVOTE02

  OCRVOTE03

  [dev root@grid1] # / usr/sbin/oracleasm-discover

  ASMLib /opt/oracle/extapi/64/asm/orcl/1/libasm.so using

  [Library ASM - Generic Linux, version 2.0.4 (KABI_V2)]

  Disk discovery: ORCL:DATA01 [31455232 blocks (16105078784 bytes), maxio 512]

  Disk discovery: ORCL:DATA02 [31455232 blocks (16105078784 bytes), maxio 512]

  Disk discovery: ORCL:FRA01 [20969472 blocks (10736369664 bytes), maxio 512]

  Disk discovery: ORCL:FRA02 [20969472 blocks (10736369664 bytes), maxio 512]

  Disk discovery: ORCL:OCRVOTE01 [10477194 blocks (5364323328 bytes), maxio 512]

  Disk discovery: ORCL:OCRVOTE02 [10483712 blocks (5367660544 bytes), maxio 512]

  Disk discovery: ORCL:OCRVOTE03 [10483712 blocks (5367660544 bytes), maxio 512]

  [dev root@grid1] # / usr/sbin/oracleasm querydisk DATA01

  Disk 'DATA01' is a valid ASM disk

  [records root@grid1] # pwd

  / dev/oracleasm/Disks

  [records root@grid1] # he's

  Total 0

  BRW - rw - 1 grid asmadmin 8, 65 4 Mar 11:18 DATA01

  BRW - rw - 1 grid asmadmin 8, 81-4 Mar 11:18 DATA02

  BRW - rw - 1 grid asmadmin 8, 97-4 Mar 11:18 FRA01

  BRW - rw - 1 grid asmadmin 8, 113 4 Mar 11:18 FRA02

  BRW - rw - 1 grid asmadmin 8, 17 4 Mar 11:16 OCRVOTE01

  BRW - rw - 1 grid asmadmin 8, 33-4 Mar 11:17 OCRVOTE02

  BRW - rw - 1 grid asmadmin 8, 49-4 Mar 11:17 OCRVOTE03

  [records root@grid1] # rpm - qa | grep oracle

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  oraclelinux-release-6Server - 6.0.2.x86_64

  oraclelinux-release-notes-6Server - 14.x86_64

  kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64

  Oracle-logos - 60.0.14 - 1.0.2.el6.noarch

  to clarify this, please login as user "grid" and run the command
       id

  This will show you if id is a member of the Group asmadmin.

  Martin

• Satellite A100-906: Express Media Player does not create the c partition

  I recently bought the Satellite A100-906 model and I would like to make a partition to save the data, but the already existing partition with the reader of the Express does not allow part C: partitioning.

  If I delete the partition Express I'll be able to install it after I divide the part C: or I have to choose between separation and the Media Player?

  In my opinion it should work, but you must create the Express Media Player partition with the same size as the old.

  PS: Do you know the Partitions Magic 8? This software allows you to create partitions while Windows is running. It's a great tool

• Win XP does not recognize the second disk in the Qosmio F30

  Hello.

  You have a problem...
  After using the recovery disk WinXP MCE does not recognize! second HARD drive.

  I mean in the Device Manager it's ok I see 2 hdd... but in his only C:\ Explorer

  Utilits RAID recognize also second HARD drive.
  But I'm going to use this HARD drive not for mirorring... I need this second HARD drive as separate HARD drive.

  Could someone help me solve this problem?

  Just format the drive and make it ready for Windows to use.
  Go to control panel-> administration-> computer management tools-> Storage-> disk management

  Here you will find all the options necessary to make your second HARD drive in Windows.

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Computer HP laptop, does not accept the recovery disks and don't accpet Windows Vista upgrade (HomeP to ultimate).

  Apparently the upgrade does not recognize that Windows is on the drive, but cannot restore the original software as HP blocked their recovery disk. The recovery partition is there, but he cannot get starter.  The recovery disks have the original spirit operating system Windows - how can I get the upgrade to recognize?

  Hello

  an upgrade must be done from vista, NOT operating system by booting from the disk to upgrade

  as you have problems using the maunfacturers recovery process, upgrade disc etc., read what you may have hardware problems.

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Windows 2003 x 64 R2 ISO does not recognize the virtual disk

  I managed to try to install a VM guest with w2k3 x 64 R2 ISO.  All the research that I did, ISO should have the 64-bit LSI SAS driver in the HCL.  When installing, I get "the installation program can't find not all hard drives.  I tried to use the most recent vmscsi .flp 1.2.0.4 and received an error that the vmscsi.sys is 64-bit capable not.  I am convinced that the LSI driver on my w2k3 x 64 R2 ISO cd is not compatible with controller LSI SAS of ESX 4.1.  There is a new download of the Microsoft Eopen site.

  Host Dell R710

  12 GB of ram

  2 x Quad Core Intel.

  ESXi 4.1 (downloaded 12 hours ago)

  I've got 3 VMs successful running, which is 2008 x 64 (which was installed without a hitch).

  I guess the fix will be "slipstreaming" the correct 64 x driver for LSI SAS controller.  If you can point me in the right direction...  I would really appreciate it!

  Also - Another strange thing that has is passed, then the creation of the virtual machine, I went into options and noticed he returned the base for 2008 x 64 statndard OS.  I had to change it back manually and click on apply.

  As far as I know, the default controller for any edition of Windows 2003 is "LSI Logic", the "LSI Logic SAS" is the default value for Windows 2008. If you create a virtual Windows 2003 computer with the 'LSI Logic SAS' driver, you may need to add the driver during installation or inject it into the installation source. You can find the driver on http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html . You can also extract from the VMware Tools CD.

  However, the easiest way is to use the 'LSI Logic' controller when you create the virtual machine.

  André

• Problem of VMotion: vSphere NFS datastore UUID does not match 3.5 or in place 3.5 upgrade-> 4.0 hosts...

  I cannot vmotion VMs using a some warehouses NFS (Netapp) get the error:

  A general error occurred: Source detected that the destination has not been able to resume

  If I turned off the virtual machine, I am able to migrate, but it will not power on because one of his records is in a data store that it deems is not accessible (I guess he's using the symbolic link to validate that I reach validation errors before the vmotion). Connect to the console, I find that UUID in/vmfs/volumes data store is different between the new VMware ESX installation & 3.5 hosts or 3.5 upgraded to vsphere hosts.

  Here is a list of a 3.5 host that has been upgraded to vSphere:

  lrwxr-xr-x 1 root root 17 Oct 12 10:12 files for the exchange of stream available1 nfs - & gt; 5f7a28d4-c4c9a2da

  lrwxr-xr-x 1 root root 17 Oct 12 10:12 flow available1 nfs vmware - & gt; 13be788b-7134a5f1

  lrwxr-xr-x 1 root root 17 Oct 12 10:12 flow2 nfs swap files - & gt; 61256 has 75-a10657c0

  lrwxr-xr-x 1 root root 17 Oct 12 10:12 flow2 nfs vmware - & gt; 975 has 5815-7be104d1

  This is a new installation of vSphere:

  lrwxr-xr-x 1 root root 17 12 Oct 10:14 files exchange flow available1 nfs - & gt; 6815c0bc-4c344d45 lrwxr-xr-x 1 root root 17 12 Oct 10:14 flow available1 nfs vmware - & gt; 13be788b-7134a5f1

  lrwxr-xr-x 1 root root 17 12 Oct 10:14 flow2 nfs files of Exchange - & gt; f9c62f8d-b687a1dd lrwxr-xr-x 1 root root 17 12 Oct 10:14 flow2 nfs vmware - & gt; 975 has 5815-7be104d1

  Can you please after the release of

  esxcfg-nas - l on the two hosts?

  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• politics does not create the new partition

  Location:

  I have an old XP computer where I want to add a second partition. The computer is part of a network of SBS 2008. Nor, disk management, or line of Diskpart command let me add a partition. According to Microsoft, literature, network policy settings may prevent you from creating a new partition. I connect locally on the computer, but still cannot add the partition.

  Question:

  How can I locally disable/change the policy setting to allow me to add a new partition?

  Thank you

  Two links that may be useful.

  How to use the Group Policy Editor to manage local computer policy.

  http://support.Microsoft.com/kb/307882

  Microsoft Windows XP - change local Group Policy object.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/StartGPstandaloneEnv.mspx

  Hope these are useful,

• Equium A60 - DVD player does not read the data disks

  Hello

  I'm having a problem with my DVD drive on my laptop Toshiba Equium A60. The DVD drive (Pioneer DVD - RW DVR-K13A) will play store bought movies etc. without problem. He will also read a blank DVD when you put it in the drive, but once the information/data are on the disc, it won t detect the drive.

  I'm not really good with computer so any help would be grateful. The computer used for any play he stopped just do a few months back.

  Many thanks, Phil

  Hello Phil

  It is not easy to find explanations for these issues. What you can try is to create own data CD and check if the drive can read. I recommend buying a blank DVD-R from TDK. Over the past 7 years I never had no problem read/write TDK media.

  Media that cannot be read properly? Is - this DVD-R, DVD - RW, DVD + R or a DVD + RW?
  Please give us more information.

• Pavilion 20 all in one pc: my HP Pavilion windows desktop 20 8 does not have the recovery disk

  I bought this recovery disk awhile back and it never worked to find the computer. You can here the disc is spinning inside but nothing apears on the screen. I did a hard drive test and everything came back by the way. I tried to enter my UEFI firmware settings to reset the BIOS, but I click on the option each time it gives me just a blue screen with the 0xc000000f erorr code so I can't even their.

  So it seems that the recovery partition is corrupt and the recovery disc you, where ever you got was defective or not bootable data.

  You will need to order HP recovery discs, if they are available.

  If you live in the USA/Canada, call this number...  1-800-334-5144.

  If you do not live in the USA/Canada, call the support number HP business PC for the country where you live.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/b usiness_desktops/6005us_332630_007.pdf

  Alternatively, you can download and create an ISO of 8.1 to Windows Installer.  But there is no HP software however.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media