Equium A60 - DVD player does not read the data disks

Similar Questions

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• DVD player does not read the DVD more

  Original title: dvd master model sd 616e

  Hello I have a problem for my dvd do read no more, help

  Hi parapapiche,

  1. Did you the latest changes on the computer?
  2. What happens when you insert a DVD in the drive?

  Refer to the article below and try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• CD player does not read the CD ROM and CD music, DVD works fine

  My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine

  Hi Anil,

  We recommend that you download and run the Microsoft Fix and check if the problem persists.
  See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

  See also: http://support.microsoft.com/kb/321641

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M5: DVD player does not read these mini DVD

  I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

  Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

  All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

  Any suggestions?
  Why his messedup?

  Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
  Try the sascha. Maybe you are a lucky man, and it works.
  If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
  Then stops again, put the drive in the notebook and the startup of the device.
  The laptop should recognize the drive and must indicate the firmware again.

  I don't know if this will help but it s attemptable m

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD player does not read the CD

  Original title: Windows Installer 4.5 on a computer laptop gateway running windows7

  I tried several things with windows install 4.5. I even tried sfc/scannow, and who came back under the name of no violation. The only thing I have not tried is the clean utility windows, that will help? Who's going to make me lose all my photos and music and information stored in the school's computer? The reason why I am trying to solve this problem is because the Player reads any of my software cd HP, Polaroid and Microsoft2010?  someone please advise

  Hi fredibar,

  1 are. What utilities you referring?
  2. what exactly is the problem with Windows install?

  As the CD/DVD drive does not read the CD, we need troubleshoot CD player. We do not think that Windows Installer is related to the CD player.

  To fix the CD/DVD read the issue, try the following steps:
  a. see your CD or DVD drive cannot read or write media
  b. click Run Now button and run the tool successfully.
  c. restart the computer and check if the CD is read by the CD/DVD drive.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD player does not read DVDs but reads CDs only.

  my hp compaq 420 core2 duo dvd player does not read DVDs but only reads the CD. How can I fix this, please help me with the correct answer.

  It will probably replace the drive. There is more than one laser in there: one for each function. You can go bad without the other goes wrong.

  608141 001

  Above is the part number for the DVD burner. I couldn't find one on eBay.  In here is a online:

  http://www.mydvddrives.com/replacement-for-HP-Compaq-608141-001-SATA-CD-DVDRW-DVD-RAM-drive-burner-LightScribe-52029

  Replacement is easy. Remove one screw on the bottom and drag the old hunt and replace it with the new drive.

• CD\DVD player does not display the contents of the data DVD.

  CD\DVD player does not display the contents of the data DVD, but will display the content of the data CD.  What is happening on more than one PC, and it began when Active Directory GPOS have been applied for the PC.  If untying policies the problem persists.  What happens on DVD ROM and DVD RAM drives.  Scanning software has been added to these machines, think it might be an ASPI crush.  All these machines are XP SP3 running McAfee.  When you insert a DVD with data on this topic, the name of the drive in windows password DVD RAM drive to CD drive, and if you try and browse the DVD it displays as a blank CD.  I changed something on the PC with the policy but cannot understand what he.  Other identical PC can view the contents of the DVD very well, but they never had the same strategies.  Any ideas, thank you.

  Hi PDoneen,

  The restore of the system; restore the computer to the before date when policies have been launched on one of the affected computer.

  You can check the link for the steps below: how to restore Windows XP to a previous state:http://support.microsoft.com/kb/306084

  Post back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• COMBO DVD DRIVE DOES NOT READ THE DVD DOUBLE LAYER

  DEAR MEMBERS

  V HAVE DELL OPTIPLEX 330 PURACHED SYSTEMS. WHEN V TRIED TO RUN MAGZINE OF FIGURES AND OTHER DVD DOUBLE LAYER ON IT. DVD PLAYER DID NOT READ THE DVD SAID. WE HAVE REPORTED THE MATTER TO DELL. BUT AFTER HAVING REPORTED THE MATTER TO LONG-TERM DELL, NO SOLUTION HAS BEEN GIVEN BY THEM

  PLS COMMENT

  URS

  SGUPTA

  
  

• Satellite A100-447 - DVD player does not read some discs

  Hello

  I have a 4 month old Satellite 100-447 (PSAAN), came preloaded with Vista Home Premium and a carpet * CD/DVD super-multi UJ-850 s player.

  The DVD player does not work properly. It will recognize a few blank, but never DVD-R DVD and won't recognise any DVD at all serious. He is very good with CD and DVD movie discs. It's just recordable DVD where there is a problem.

  Also when you try to write to a DVD, when he chooses to recognize a TI-error in half way through.

  What can I do?

  Thanks for your help.
  Adam

  Hello

  You can do the follwowing:

  Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp,

  Download the latest update of the firmware for this drive, install it, and then try again.

  Sometimes, the manufacturer must update their readers for the newer recordable media and so I think that it is possible that your drive is simply not up to date.

  Welcome them

• Equium A100-338: CD/DVD player does not read CDs and DVDs

  Hello

  ITS BEEN 2 DAYS SINCE MY CD/DVD DRIVE WILL NOT READ ANYTHING MORE?

  I UNINSTALLED THE DRIVER AND RESTARTED THE LAPTOP, SO HE HAS REINSTALLED THE DRIVER AGAIN, BUT IT STILL DOES NOT WORK.
  IVE ALSO TRIED TO GENTLY CLEAN THE LENS BUT THAT DOESN'T WORK EITHER.

  WHEN I PUT A CD OR DVD IN THE DRIVE IT SEEMS TO READ, RE-READ AND RE-READ UNTIL HE GIVES UP AND A LIGHT ORANGE REMAINS LIT ON THE CD/DVD DRIVE ITSELF?

  PLEASE CAN SOMEONE HELP!

  Hello

  Please put a recovery media delivered on ODD, start your laptop and press the F12 key. Choose the CD/DVD as first boot device and check if the recovery procedure starts correctly.

  Please publish results.

• Carpet * UJ841S CD/DVD player does not read blockbuster movies

  My dvd * one player UJ841S mat will be read/write everything ok.
  BUT it does not recognize the Blockbuster films. I can't play a movie.

  Can anyone help?

  David

  Hello

  Seems that certain this kind of DVD is not fully compatible with this CD/DVD player
  Sorry, but these issues are not uncommon that you will always encounter discs which are not totally compatible and that the readers of the laser lens is unable to handle this drive

  But just a question; These films are created for the European region?
  I mean there are different regions DVD

  As far as I know the films for European needs region 2
  The United States have need of region 1 and South American setting & Middle need area 4

  So if you want to watch DVD designed for US then you need to change the region to 1 settings.

  But note; You can change the region settings only 4 times then this parameters could be blocked, it is not possible to change it again

• CD player does not read the series Satellite A recovery CD

  Hello

  I have a laptop my father gave to me and I need to restore it before using it for me because it works very slowly.
  I have the restore cd but I have problems with the cd player.
  It does not read some CDs, but it will not read the cd recovery so its as if it is not there.

  Is it possible to restore it without the cd? I'm not very super-friendly up with computers, so please simplify if possible.

  Any help would be appreciated.

  Thank you

  Claire.

  You can try to boot from the original CD of Microsoft Windows.
  Check if this CD is readable.

  Then you can download the drivers from Toshiba from the European driver Toshiba page and could install the drivers

  A few words about the CD drive problem, it seems that the goal of readers can calibrate in the right position and therefore some CD or DVD is not readable
  In most cases, the CD/DVD drive should be replaced to solve these problems

  See you soon

• Satellite P200-140-CD/DVD drive does not read the CD

  Hi all

  I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
  I've updated the drivers, cleaned the lens, completed all the normal tasks.

  Any advise / solutions out there?

  Hello

  Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

  (1) run regedit (Start-Run-Regedit online online)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  I hope this works for you too! :)

  Good bye