Niet works Blue thooth

Similar Questions

• STORE. E CANVIO 500 GB: not working + blue light

  Hello

  I use the HD on my PowerMac for Time Machine. Everything was correct and after 3 days, no answer... My computer does not show me the HD and the HD show a blue led (and no diod white, when it worked fine). What does this blue led? Can I expect again use my HD?

  Thank you all,

  Best regards

  Laurent

  I took another cable (I have a second HD Store.E Canvio) and everything is ok : white light and it works well.

  It was a cable problem...

  Sorry for this post...

  Kind regards

  Laurent

  Originally posted by Laurent___
  

  Hello

  I use the HD on my PowerMac for Time Machine. Everything was correct and after 3 days, no answer... My computer does not show me the HD and the HD show a blue led (and no diod white, when it worked fine). What does this blue led? Can I expect again use my HD?

  Thank you all,

  Best regards

  Laurent

• Re: My new C50 of Satellite does not work / blue screen

  Hello

  My mother just bought a new computer. We began to set it up (hopefully, this is the correct English word) for the first time. The operating system has stopped working after a few minutes.
  I explain (I'm not very good at this ^^).

  I turned it on, the computer asked a few things like what color, we would like to be, give a name to the computer. And then he Laura to be connected to the internet. I tried to do, but it did not work.
  So now, I'm just a big blue screen and nothing I can do. I can't go back to the first step, and I can't move forward because there is nothing else than this big blus screen.

  Can someone help or not the slightest idea what should I do?

  Thank you for your help

  PS: English is not my mother tongue, sorry for the errors of language.

  Hello

  Is there a button NEXT to proceed to the next step in the implementation?

  Press the power button and hold the button until the phone switch. It again, and I hope that you will be able to continue the installation of Windows.
  What I always do is to finish the configuration without WLAN settings. Later, when Windows is configured and fully charged, I put WIFI password and everything is OK.

• Display vertical lines not working - blue and grey

  I bought a Macbook Air on July 2014, but did NOT purchase the extended Apple Care. On October 2015 the display just stopped working one morning given. Not even the Apple logo appears when you turn on the computer. The screen goes black night at vertical lines different colors of light blue gray. This happened only 3 months after the expiration of the warranty. I tried resetting the NVRAM, but it has no effect.

  As I am currently in the Brazil works, I had to make to local technical assistance, which sent me a quote to close to US $1000 to replace the display. It is about this that paid for the entire computer when it bought in Boca Raton, Florida.

  Apple will do something to replace it, or do I just give up the Macbook Air? I'm not ready to pay that much to fix and I find it absurd that this happened only 3 months after the expiration of the warranty. If this was a minor issue, OK. But the screen does not like that in such a short time is unacceptable.

  Here are some photos showing what the screen looks like:

  

  

  Hello, I have a mac book pro 17 '', beginning 2011 and during the day to El Capitan 10.11.2 vertical lines appeared. Its lines of blue pixel, similar as in the photo, but uniform, efevery 1 for about 3cm in the centre-right part of the screen.

  Reseting LANDAU does not help.

• netwerkfirewall niet works

  Goedemorgen,

  IK heb een net laptop computer nieuwe (Toshiba) en onderin mijn scherm staat of melding dat er een bericht feel right is. Said blijkt you gaan om het inschakelen van netwerkfirewall. Works ik deze optie om netwerkfirewall aanklik you activeren onderin grabbed scherm, Haag Suite dat deze niet mijn's van. Hoe kan ik said clean verhelpen?

  Groet en alvast dank.

  Ronald

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• Niet works bearing Muse2015-2

  Flipping tuning werken niet het has mij, naked toe tot twee dagen om er zelf achter gekost you komen. Unique!

  Of previous versie van Muse is o.k. said wat you wearing.

  Normally, this works perfectly in Muse 2015.2.

  If you encounter a problem, please create a small site with a single object of reversal, demonstrating your question. Download the .muse file on Dropbox or similar file sharing service and post the link to download here, so we can have a look.

• SuperFetch, Client DNS stop working, blue screen blocks as well

  First stop, I have a desktop HP with Windows Vista Home Premium SP2. He was just out of nowhere an error about 2 weeks code would come and tell me one of these services has stopped working. It allows me to close or to find a solution online. This happens every day. It is very random; I don't see a reason for it. I have especially Windows Mail, IE8 and sometimes open Windows Media Player when these things occur.

  One thing I want to point out is that I did a diagnostic run on my computer and I got a BIOME-1 error code for my ram memory. All other material checks were very good. The computer is supposed to have 2 GB of ram, so is it possible if she works only on 1 GB etc... It is the cause of all my problems regarding windows applications crashing? Oh, also just about every day and sometimes more than once a day, I get the blue screen of death crash. I'm so confused, please help!

  I am up to date on all the Windows updates, so I have SP2 and all updates since then. I also use my service of update and HP as well to ensure that my drivers are working all day.

  Thank you
  Will be

  I put only 1 memory stick into the system and run the diagnotics. If it passes, take it out and plug the second stick and then re-run diagnosis. If it fails, get a new module or clean legs with an eraser to erase and blow your motherboard releasing sheep of dust (do not use compressed air can)

  What is your system model?

• Velden van Aanvinken niet works 2.5 Joomla in FF, in IE wel

  In Joomla 2.5 kun I things aanvinken en dan op knop om of aangevinkte things will want far you want. ALS ik said FF try, squeeze melding dat ik first things aanvinken moet ik, ik which said Molfetta Heb wel. In IE works het wel goed.

  Says een staff clean, en zo ja, wat is Holland?

  Holland is: met with Ctrl + Shift + r to page loaded opnieuw.

• Niet works 'koppeling question. "

  IK kan 'koppeling question' onder Bestand in firefox niet bloodstains. Het reageert niet.
  Put WAT ik?

  You are welcome

• afspeelsnelheid niet works

  ALS ik try afspeelsnelheid you er niets gebeurt veranderen

  You posted in the English version of the Microsoft Answers forums. Please repost your question by selecting your language in the drop-down menu at the top of this page or by going to the international section of this Web page:

  http://www.Microsoft.com/communities/forums/default.mspx

   

  Translation of Bing above:

   

  Incredible would U in of myself versie van Microsoft answers-forums. Repost please your question door ofwel het selecteren van uw taal ITU het drop down menu aan bovenkant van deze pagina door you gaan naar deze webpagina van international books:

  http://www.Microsoft.com/communities/forums/default.mspx

• Niet works webcam in hp dv6700

  Wat ik ook doe heb laptop al 4 keer opnieuw geinstaleers en meeting fiit critique maar ik ook doe niets en pilot ervan kan ik niet vinden beter kan iemand mij helpen dank u wat erbij soon maria

  Please repost in the Dutch language forum

  Please repost voor Nederlandse taal Microsoft forum

  http://answers.Microsoft.com/de-de/Windows/Forum/windows_vista-Hardware?tab=unanswered

• Mijn brander in Toshiba L350 doet een halve minuut huren branden en stop dan met none mislukt. IK heb 2009 Ashampoo en deze ook niet works!

  IK hoop dat jullie een Holland made already.

  I'm sorry, but these Vista Help Forums only provide support in English.

  http://support.Microsoft.com/common/international.aspx

  To ensure that you receive support appropriate for your location information, select your region setting in the list on the link above and then click the arrow button.

  Thank you.

  Mick Murphy - Microsoft partner

• Het radiaalfilter niet works

  Op mijn computer laptop mac/pro geeft hetadiaalfilterbij mij geen cirkerlvormig iets ovaal r.

  ER lijkt wel iets vaags you verkleuren.

  Anything mac op is er geen clean.

  Wat is Holland?

  Roel

  Hi roelh90950052,

  Could you please confirm what happens exactly when you use the Radial filter and also please check if there is a check mark in the mask 'reverse' or not?

  Kind regards

  Tanuj

• Verkenner works niet

  Hallo

  een clean die ik zo niet kan vinden ik wil software perfect en als ik wil openen squeeze configuratie ik steed het bericht dat niet works verkenner dan wordt update Draai ik doe says dan is er geen update was

  I'm sorry, but these Vista Help Forums only provide support in English.

  http://support.Microsoft.com/common/international.aspx

  To ensure that you receive support appropriate for your location information, select your region setting in the list on the link above and then click the arrow button.

  Thank you.

  Mick Murphy - Microsoft partner

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.