STORE. E CANVIO 500 GB: not working + blue light

Similar Questions

• my app store on my 6plus does not work... not load materials... Help, please

  my app store on my 6plus does not work... not load materials... Help, please

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559

• I just bought a new mouse at the Apple store today.  It does not work.  I have a logitech keyboard, not an Apple (they are too small).  My previous mouse worked.  Why not another?

  I wrote this message 4 times now!  Here it is:

  I have a MacbookPro.  I just bought a new mouse today from the Apple Store, because the little door on the back of my old we kept popping off the power.  Now a new does not work with my keyboard and the Apple screen.  I use a Logitech keyboard, with which I have never had problems using the old mouse.  The batteries seem to work.  What is the problem?

  What is a wired mouse or a wireless mouse?

• Re: My new C50 of Satellite does not work / blue screen

  Hello

  My mother just bought a new computer. We began to set it up (hopefully, this is the correct English word) for the first time. The operating system has stopped working after a few minutes.
  I explain (I'm not very good at this ^^).

  I turned it on, the computer asked a few things like what color, we would like to be, give a name to the computer. And then he Laura to be connected to the internet. I tried to do, but it did not work.
  So now, I'm just a big blue screen and nothing I can do. I can't go back to the first step, and I can't move forward because there is nothing else than this big blus screen.

  Can someone help or not the slightest idea what should I do?

  Thank you for your help

  PS: English is not my mother tongue, sorry for the errors of language.

  Hello

  Is there a button NEXT to proceed to the next step in the implementation?

  Press the power button and hold the button until the phone switch. It again, and I hope that you will be able to continue the installation of Windows.
  What I always do is to finish the configuration without WLAN settings. Later, when Windows is configured and fully charged, I put WIFI password and everything is OK.

• Display vertical lines not working - blue and grey

  I bought a Macbook Air on July 2014, but did NOT purchase the extended Apple Care. On October 2015 the display just stopped working one morning given. Not even the Apple logo appears when you turn on the computer. The screen goes black night at vertical lines different colors of light blue gray. This happened only 3 months after the expiration of the warranty. I tried resetting the NVRAM, but it has no effect.

  As I am currently in the Brazil works, I had to make to local technical assistance, which sent me a quote to close to US $1000 to replace the display. It is about this that paid for the entire computer when it bought in Boca Raton, Florida.

  Apple will do something to replace it, or do I just give up the Macbook Air? I'm not ready to pay that much to fix and I find it absurd that this happened only 3 months after the expiration of the warranty. If this was a minor issue, OK. But the screen does not like that in such a short time is unacceptable.

  Here are some photos showing what the screen looks like:

  

  

  Hello, I have a mac book pro 17 '', beginning 2011 and during the day to El Capitan 10.11.2 vertical lines appeared. Its lines of blue pixel, similar as in the photo, but uniform, efevery 1 for about 3cm in the centre-right part of the screen.

  Reseting LANDAU does not help.

• Write-Host returns the correct value of the data store while Export-CSV does not work

  Hi team

  I use the attached script to get vcenter inventory. Everything works fine but the output to one gives CSV value like datasore ' VMware.Vim.VirtaulMachineConfigInfoDatastroreUrlPair [of] "instead of the actual data store name.

  But when I do a write-host in the end (instead of export to CSV) I can't find the name of data reflecting properly store.

  Can someone help me understand what Miss me?

  Thanks in advance.

  Olivier ONE

  The problem is that the virtual machine can have several data warehouses and the DatastoreUrl is an object, not a string.

  Try changing:

  $Report.DatastoreName = $VMview.Config.DatastoreUrl

  in:

  $Report.DatastoreName = [string]: join ('',($VMview.Config.DatastoreUrl |) Select-Object name - Expandproperty))

• Drive DVD/RW Optiarc AD - 7201S 5 doesn't work or does not work

  I have a HP desktop with an Optiarc AD - 7201S 5 DVD player PC. It worked perfectly but stopped working months ago. I tried Delete upper/lower suggested on other forums as registry keys, uninstall and reinstall microsofts windows drivers, attach it to the tool and I even erased from my hard drive and did a cover of the plant and it still does not.

  Watch DVDs it either does not start or starts and plays for a few seconds and then stops dead. try to restart the movie, I get a message telling me to insert a dvd cause there isn't one in the drive.

  games it that either won't start at all or with world of warcraft for example installs the first disc very well and when I go to the second it stops dead and will not work without lights on the disk. It is not the cause of discs, I have a second identical computer and the drive that a disc install perfectly.

  read and write dvd/rw worked well in the past have not tried recently (I backup important images, website etc. files on the disk and always worked previously.) I now use a usb flash.

  the details are below:

  driver date 21/06/2006 (never had always used the disk those installed by windows, do not know where to find those to update if there is, windows says Joana re updated.)

  6.0.6002.18005 driver version

  Driver details:

  C:/Windows/system32/drivers/CDROM.sys

  C:/Windows/system32/drivers/GEARAspiWDM.sys

  These two files are the same on there another system with unit of work.

  I really need to get this drive working again. someone at - it ideas? or should I just rip the reader to take a hammer it and just get a new one?

  Thank you!!

  Hello

  It seems that the reader or any other material goes down.

  / Settings (BIOS/CMOS) often F2 as you start - set to CD/DVD 1 safe order then try
  to start on a Windows disc. This should be very telling.

  Check with a real computer store (not the leeks the glances at a Best Buy or other stores to large surface) or
  HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Updgrade of Windows 7 Home Premium to professional does not work.

  Just purchases Anytime Upgrade for Windows 7 upgrade Home Premium to professional.  I had an a message which the "upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade."  Just pay $130.00 to the Windows store for something that does not work?

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Satellite C660 keyboard and mouse not working not

  I have a Satellite C660 who is about to leave the window.

  The list of problems are the following:

  Keyboard does not work
  Mouse pads and button do not work
  USB mouse and keyboard do not work (but light up with power)
  He likes also turn off randomly when the battery in but it's the least problems.

  any ideas as to why he did this and what can we do about it will be highly appreciated.

  Thank you.

  Hello

  I m wondering about your statement about external USB mouse and keyboard.
  I thought that your problem has been linked to the defective module internal keyboard and touchpad, but now I m thinking that this may not be the case since the external USB keyboard does not work as well as the external USB mouse.

  Probably his most serious hardware malfunction: maybe something related to the motherboard? Who knows a hardware diagnostic test must be done to confirm this

  Just a question: are you able to access the BIOS? I mean the key F2 keyboard works in order to access the BIOS?

• Envy 17 - T n100: Finger Print Reader does not work

  I have a new machine.  The fingerprint reader does not work, no light, no response.  I uninstalled the device in device manager, rebooted and reinstalled, still no response.

  Has sought to pass Simple software but could not find it.

  Where should I go from here?

  Hey!

  Did you uninstall the driver of the fingerprint in before Device Manager?

  To use the download I you provided, you will need to uninstall the driver again.

  • Open the Device Manager
  • Search for biometric devices
  • Under biometric devices, look for the device (called Validity Sensor sensor AuthenTec)
  • Right-click on the fingerprint sensor
  • Click on uninstall
  • Restart your computer.

  Here's a download for the fingerprint reader. This download sp71729.exe might work for you.

  As a last resort, you can try:

  • The steps as a solution in the thread of scan fingerprints of validity does not not on Windows 10.
  • Uninstalling HP SimplePass completely,

  Thank you for being a part of the community of HP. Please let me know if that helps solve the problem by marking this message as "accept as a Solution. If you need more assistance let me know and I will gladly do all that I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Thank you!

• the ink lights does not work

  Product name: Deskjet 2050 All - in - one J510a

  Copy in black ink not working, warning lights did not show (and never did).

  Product name: Deskjet 2050 All - in - one J510a

  Operating system: Windows 8, 64 bits

  Copy and printing in black ink do not work.  No light warning flashing on the printer.

  Via the computer, I get the black ink levels (bowtie symbol?) is ok, but less than 25%.

  The cartridge ink levels color is close to zero, it is said.  How ever, when copying, the color works nice

  but printing in black ink does not at all.

  I tried to clean the inkheads twice.

  Should I replace both cartridges?

  Why don't show the printer ink level lights?

  Why computer don't warn me about low ink levels?

  Hi @malin_t,

  Welcome to the HP Forums!

  I understand that the ink lights do not work and you cannot print in black with your HP Deskjet 2050, and I'm happy to help you!

  If you have tried everything in this guide, solve the problems of quality Print to the HP Deskjet 1050, 1050 A, 2050 and 2050 all-in - One Printer Series. Then I would definitely consider replacing both cartridges.

  About the ink levels, there should be an icon of HP printer on your desktop. Double-click it to open it, click the picture of the level of ink in the HP Solution Center, and then click the advance tab Setiings, here you can choose if you want alerts of ink to showed immediately or only when you print.

  

  Hope this information helps and have a great day!

• Drive HARD TOSHIBA CANVIO 3.0 does not work with USB 3.0 ports

  Hello

  I bought an external TOSHIBA HARD USB3 CANVIO 3.0 disc MORE.
  I and laptop computer from other manufacturers that support USB3. When I connect the USB2 HARD drive it works and I can copy or paste my files but when I connect the HARD drive to the port USB3 that it doesn't work and my laptop cannot detect HDD with USB3.

  I've updated my driver USB3, once again, but when I connect it to USB3 just turn on the blue light and nothing more.

  Please tell me what can I do to solve my problem?

  This link is my HARD drive type and model: http://storage.toshiba.eu/cms/en/hdd/external_drives/

  Thank you

  Have you tried to contact support for laptop and ask whether something should be activated or changed for this port USB3.0? Maybe some BIOS settings.

  If possible, try to check the functionality of some other USB3.0 available PC/laptop.

  As much as I know there not something special that will help you. It is Plug & Play device.

• 2 TB Canvio does not work

  My 2 TB canvio portable drive has stopped working.
  There is a blue light on where the white flashes normally
  Any help?

  From my point of view of the few there are not many proposals for troubleshooting:
  Most of its hardware related problem if the disk HARD isn't recognized properly.

  You could try to connect this HARD drive on another computer and different USB ports just to check if it s not USB related issue.
  Otherwise, its HARD drive malfunction :(

• Toshiba Store.e Canvio 1 TB appearing is not on Macbook

  Hello

  I have a problem with my external hard shore, it is a Toshiba Store.e Canvio 1 TB, HDTC610EW3B1.
  It works fine on my old Macbook running the Mavericks but now on my new Macbook Pro retina running on Yosemite, it will not appear anywhere.
  I checked with disk utility, and it does not, also not appearing is not on the USB in system preferences.

  Any ideas on what is happening here, please?

  Thanks in advance for your help.

  You can test it with the Windows machine? There is everything OK?

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">