Nikon D3 endearing, Dungeon defensive connection of the camera

Similar Questions

• Hello I can not connect using the camera Nikon D5 me please

  Hello I can not connect using the camera Nikon D5 me please :)))
  I've heard say that some work and I can not connect! Can someone help me to write on this topic?

  LR supports D5 attach now!

• Unable to connect to the camera HP Slate7

  I don't know where to post this, but we are.

  Admins: Please this place to the right place as needed.

  Not too long ago, I got a 7 2800 HP Slate Android tablet. ICS 4.1.1 Android.

  I got less than a month ago to be exact. And now, to my great disappointment, camera of the Tablet does not at all.

  I get just the error message "error: Can not connect to the camera.

  I would like to know what I could do to fix it. I already reset the Tablet through the Android user interface as long as the Hard Reset (hold flight +;) -Flight; Power button for a few seconds) to reset, all to nothing done.

  What could be the next course of action?

  Jocampo wrote:

  Yes, I did everything you said and still nothing.

  Any other ideas?

  Contact HP for warranty repair.

  There is, unfortunately, no other tests that you can perform.

• I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

  I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

  I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.

• Re: Installation Canon IXUS V - connection of the camera not detected

  I installed the driver from the website of Canon, but when I connect the camera, I get a message saying "connection Camera not detected' followed by an error message saying pscN109 has stopped working.

  Then a message from Microsoft saying no soloution found. Can someone help me?

  Hey Buddy

  May I ask why you post this message here on the forum of Toshiba?

  I think you should contact the manufacturer of the device for support

• Adobe Bridge cs6 - Photo Downloader 10.11 OSX cannot connect to the camera Canon

  Hallo,

  Since I installed OSX10.11 (El Capitan) Photo Downloader (CS6) did not find my Canon EOS 5 d Mark 2 more. If I use 'Photo' of Apple the cameras will be connected and with the original Canon software it works, too. But in my workflow, I use Adobe and I hope that the problem can be solved. Someone else has the same problem?

  Thanks for help.

  THIL

  Hi thorstenh

  Please see this double thread El Capitan & Adobe Photo importing

  It may be useful

  Concerning

  ~ Assani

• No connection between the camera and

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  =======================================================
  Perhaps the following links will propose a few ideas:

  Windows Vista
  How to make photos of
  my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can not get the nikon super coolscan 5000 to connect to the XP virtual machine

  Hello

  I use VMWare Player version: 2.5.1 build 126130. The guest operating system is windows XP with all the latest updates and SP3. The host operating system is Vista 64. I installed the drivers for the nikon super coolscan 5000 in the virtual machine. When I started the scanner, reader informed me that there was a new device available. When I tried to connect to it, I got the error in a dialog box:

  Unable to connect the "Nikon USB Device" USB device to virtual machine (error code 4). Please contact technical support of VMware, Inc. for assistance.

  I created the "appliance" XP (I think I use the right term) with VM Workstation 6.5.1 build-126130.

  If it works? The reason I want to run a virtual machine is to get XP to run this scanner and a few other old incompatible programs.

  Thanks in advance for any help.

  Hello

  This log shows a virtual machine that was started in suspended - mode which are not ideal - especially when the resolution of the problems-USB.

  Please post a log where the virtual machine starts fresh

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• QX10: Connect with the Nokia Lumia 920 (Windows Phone)

  Hello

  I know there are apps for Windows Phone which should be compatible with my Sony QX10, such as: http://www.windowsphone.com/en-us/store/app/scrap/896b0e1b-2c1a-40e4-9c55-09050e3860dc

  But when I try to connect to the camera via Wi - Fi, it failed with an error "Incorrect password." I also tried it with other devices (Android), and the phone connects as it should. No matter how many times I try, it holds just failing in combination with my 920 Lumia.

  Anyone have any ideas on how to solve this problem?

  Thank you!

  Problem is solved with the last update of Windows Phone!

• is it true that the importwindow from the cam has been changed?

  is it true that importation of the cam have been changed?

  1. in the connection of the cam, that the importwindow does not open automatically as it did before

  2. until the cam has been positioned in the upper left corner of the importwindow under the CAM, but now in the "devices" section (where formerly only the img files were placed)

  No problem, but now it shows ALL the files into it and not just the mxf files.

  3. I don't see the status of the import more. i.m.o. pretty bad...

  Is this true or can be caused by updating the O.S. of the iMac from scratch?

  1 n °

  2. No, this is not correct behavior. The camera is not recognized as a camera.

  3. progress made in the dashboard? HUD background tasks?

• Why the camera connector is incompatible

  Since the upgrade the OS on my iPad, my connection to the camera continues to show its incompatible.  What can I do to use it?

  Is your connector of the camera, an Apple brand device? Please describe the exact steps you take to use and provide the text of the error messages, you receive.

  If you use a trademark Apple Camera Connection Kit try to reset your iPad first. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer. Then retry the connection of the camera. If it still does not work, try to borrow one from someone you know. If the borrowed does not work or you do not have to use an appointment at an Apple store to have a technician look at your iPad.

• NAC 4.8 adding to the case because of the cam

  Hi all

  I threw a half because of the NAC installation and this is my first deployment of the NAC, I feel a little overwhelmed.

  I read the installation guide for the devices from the back to the front, but I have a problem after the addition of a case to the cam.

  I am able to add the case to the cam successfully, but almost immediately, the case and the cam can no longer ping between them in the cli.

  the States of event logs that the heap in connected to the cam, but newspapers then an error that the cam is unable to push the registration to the CAs. from this point, I get several questions of event log indicating that the case is out of sync

  I copied a part of the nac_manager.log which show the connection process:

  2012-03-09 22:33:06.037 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartServer - SSS - connect: get the new connectorClient of 10.0.0.100

  2012-03-09 22:33:36.433 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart

  2012-03-09 22:33:38.434 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart

  2012-03-09 22:33:40.436 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart

  2012-03-09 22:33:42.438 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: click on the STOPPED state

  2012-03-09 22:33:42.617 + 1100 WARN [TP-Processor24] com.perfigo.wlan.web.admin.SecureSmartPublisher - NAC Server 10.0.0.100 is out-of-sync.

  2012-03-09 22:33:42.702 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.FilePublisher - FilePublisher - writing: setPath failed...

  2012-03-09 22:33:42.793 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.FilePublisher - FilePublisher - writing: setPath failed...

  2012-03-09 22:33:42.833 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.SecureSmartPublisher - SSM publishAccess: impossible to publish the comments sign-up page

  2012-03-09 22:33:42.872 + 1100 [TP-Processor24] com.perfigo.wlan.jmx.admin.FileUtil - FileUtil - readFile INFO: /perfigo/control/conf/os-detection.fp

  2012-03-09 22:33:42.887 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.AccessConf - cannot activate ETH1 on 10.0.0.100

  2012-03-09 22:33:42.888 + 1100 [TP-Processor24] ERROR c.perfigo.wlan.web.admin.AdminIpAccessInfoManager - AIAIM - publishAccess: failure

  2012-03-09 22:33:42.888 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.ServerConf - SC - stopOobSWissServer()

  2012-03-09 22:33:42.905 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - 10.0.0.100 added to Clean Access Manager

  2012-03-09 22:33:46.922 + 1100 [pool-1-thread-1] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  2012-03-09 22:33:46.922 + com.perfigo.wlan.web.admin.SecureSmartPublisher - SSP - connectAndPublish 1100 [pool-1-thread-1] ERROR: could not connect to 10.0.0.100

  2012-03-09 22:34:01.614 + 1100 [pool-1-wire-2] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  2012-03-09 22:34:01.615 + com.perfigo.wlan.web.admin.SecureSmartPublisher - SSP - connectAndPublish 1100 [pool-1-wire-2] ERROR: could not connect to 10.0.0.100

  2012 03-09 22:34:01.627 + 1100 [pool-1-wire-2] WARN com.perfigo.wlan.web.admin.SecureSmartPublisher - NAC Server 10.0.0.100 is out-of-sync.

  2012-03-09 22:34:05.628 + 1100 [TP-Processor19] com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication ERROR: could not connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  2012-03-09 22:34:20.618 + 1100 [pool-1-wire-3] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:

  java.net.SocketTimeoutException: connect timed out

  I've followed all of the installation guides recommendation of the disconnection of the interface untrust on the CASE and there is no HA configuration currently...

  What I don't understand is the inability of webcams and cases of ping each other, but they can ping other devices on the network. The SCA and the cam are in different VLANS.

  Any assistant to a guru of the NAC would be greatly appreciated.

  Thank you

  JS

  Thanks a lot Man, saved you my day

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Error: unable to connect to the server 'Err_connection_refused '.

  Dear friends!

  I use a macbook pro (mid-2012 model year) updated with OS X 10.11.4.

  Recently, I am unable to connect to most of the Web sites in nearly all browsers (firefox, google chrome, safari). I am able to open gmail, sites of apple and google start page.

  Error message in chrome like "Err_connection_refused".

  Error in Safari, as "Safari can't connect to the server.

  I tried to delete the browser cache, cookies and even re-installed browsers. But it helps did ' t.

  I tried to delete the WiFi under preferences and recreated. Still problem persists.

  I am able to display all Web sites in my windows laptop and mobile phones connected to the same WiFi at home.

  Above the problem came recently for 1 week. Please suggest a solution.

  Kind regards

  BALAJI K

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. The files that belong to an instance of VSearch will have the same date of change within about a minute, so they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Search in the folder with the name of all these forms:

  com.something.daemon.plist

  com.something.Helper.plist

  com.something .net - preferences.plist

  Here, something is a string, which may be different in each instance of VSearch random meaningless. So far it has always been an alphanumeric string without punctuation signs, such as "disbalance" or "thunderbearer."

  You may have more than one copy of the malware, with different values of something.

  There may be one or more files with the name of this form:

  com.somethingelseUpd.plist

  where George can be an empty string of sense that something different. Yet once, there may be more than one file of this type, with different values of Gisele.

  Here is a typical example of an infection VSearch:

  com.disbalance .net - preferences.plist

  com.thunderbearerUpd.plist

  You will have files with similar names, but probably not identical to these.

  If you feel confident that you have identified the files above, drag only the files - nothing - to the trash. You may be prompted for administrator login password. Close the Finder window.

  2. open this folder as in step 1:

  /Library/LaunchAgents

  Move to the trash all the files with the name of the form

  com.something.agent.plist

  where something is one of the strings that you found in step 1. There may be not all of these files.

  3. If you have whatever it is moved to the trash in step 1 and step 2, restart the computer and empty the trash.

  Do not remove the folder 'LaunchAgents' or "LaunchDaemons", or anything else inside of one or the other, unless you know you have another type of unwanted software and more VSearch. Records are a normal part of Mac OS X. The terms "agent" and "demon" is a reference to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  4 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  5. If you do not find the files or you are not sure about the identification, after what you have found.

  If in doubt, or if you have no backups, change nothing at all.

  6. the penalty may have started when you have downloaded and run an application called 'MPlayerX' or "PDF Pronto." If there is an element with a name in the Applications folder, delete it.

  This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

  In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

  Then, still in system preferences, open the pane of the App Store or software update and check the box marked

  Install the system data files and security updates (OS X 10.10 or later version)

  or

  Automatically download the updates (OS X 10.9 or earlier version)

  If it is not already done.