Nikon D5300 videos are not supported on iPad Mini 1

Similar Questions

• My photos and video are not supported due to safe mode (I think)

  I went in safe mode to move around 3 000 files, photos and videos of user account 1 and account 2 to 2 office in a folder called 'FILES2KEEP '. When I rebooted my computer to check on the photos, I could not see most of the miniatures, and even with some still visible, when I tried to open windows photo gallery said, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "For the videos, I received the error message 2048 after them playing with QuickTime player. These files were not deleted somehow, just moved from one region to another in safe mode. The sizes of these photos and videos are normal and their respective sizes. I decided to place these files in normal mode and then restarted my computer, however, nothing has worked. I sill have the folder "FILES2KEEP" on desktop 2, but without the files user account. This could be the cause this and what are the several ways to address this issue?

  (Note: I'm running on Windows Vista Edition complete with Service Pack 2)

  Safe mode was probably not the cause, but the files are permanently damaged and need to be restored from your most recent backup.  The files may have been damaged during the move, but which is unlikely because move files only changes their display location, the tracks on the disc do not actually move.

  You could try checking the errors on your drives, the 'answer' to this page explains how: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/chkdsk-utility/4f46929e-db2d-43e0-88c4-a3a5c49bb2da

• Satellite U300 connected to the TV - video format not supported

  I am using Toshiba Satellite U300-15 q and it has a vga output, so I bought a cable and a box that transfers analog signal to VGA to hdmi digital so that I can connect to my Sony TV are 32 '.

  But if I connect it it says on the tv in video format not supported in yellow letters.
  Why is this and how do I solve this problem?

  Throughout history the problem is you are using third party hardware or software so described this issue has nothing to do with your laptop computer Toshiba or Toshiba in general.

  On the mobile side is important, the video signal is sent to the right path. What will afterwards and why this signal is not transformed correctly falls within this box.
  What box are you using?

  In my opinion you should contact the manufacturer of this box and their support. They should know how it works and how to solve this problem.
  In General, Toshiba has nothing to do with this problem.

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Windows Media Player: "Server execution failed" and "files needed to display video are not installed or do not work properly.

  I have a problem with Windows Media Player on laptop Lenovo G780. My laptop is under warranty (bought a month ago), but technical support Lenovo told me that the Windows Media Player program is not covered by the warranty.

  And this is a problem:

  When I click on Windows Media Player - to about 0.1 sec I see it opens and closes the window and nothing happens.

  When I select a mp3 or wmv file and right-click with the option open with Windows Media Player - I get a message: "Server execution failed" - I checked that all services with 'Media' in the name are running.

  When I select a mp3 or wmv file and right-click with the open option with Windows Media Center - Windows Media Center opens with the message: "the files needed to display video are not installed or do not work properly.

  When I select a file mp3 or wmv and right-click with option open with Windows Movie Maker life - see the video

  I tried to turn / WMP and WMC - did not help
  Tried to run as administrator - did not help
  I don't see something suspicious under events

  What can I do else?

  Thank you

  Zarek

  I had the same problem and then by chance, I tried a video on YouTube and it worked for me. Here's how I went on this issue and solved my problem:

  1. go to the computer, then OS (C).
  2. you will need to open Program Files (x 86) and Program Files.
  3. go to Windows Media Player in Program Files (x 86) and open the folder.  Then, remove the wmplayer file.  You may need to work around the error TrustedInstaller.  I'll tell you that, in a moment.
  4. in Program Files, go to the same folder for Windows Media Player and select the same file again. Wmplayer.  Copy the file in another window open.  Copy ensures that if the question comes up again you can at least try to fix it again.
  This should be the end of your problem.  If you need to circumvent the TrustedInstaller question is how:
  1. right click on wmplayer and select Properties > Security > advanced > owner > Edit > other users and groups.
  2. Enter your username and then click on check names.  Click OK.
  3. close the dialog boxes as he has requested.
  4. open again the properties and click Security.  Select your username from the list and click on edit.  From there, select full control.
  This should give you full control over the removal of the original file for WMP and easily allow you to copy the other files (x 86) programs.
  Please let me know how it goes for your problem.

• My photos and videos are not in chronological order, when I export the Photos app

  Hello. When I export my photos and videos from the Photos app on my iMac all the photos and videos are not in order. I need all the photos in good standing - I need to export about 5 000 pictures of the application in order for a meeting next week! Help, please!

  Ethan.

  This is not photo - it is a function of the viewing program (probably the finder) - once the photos are exprted form pictures you can see then in different ways which you control, Photos does not - by the finder you can view by name of son, byt several dates, by file size, etc.

  Usually, the best way to accomplish what you want is to export using the names of batch file numbeing and then sort by file name in the program viewing

  LN

• Many of my modules are not supported by version 5. I don't want to spend hours on this hunt. I want just the version 4 and stop Mozilla automatically update my computer to v5.

  Google toolbar, etc. are not supported. You have completely disturbed how I do business. I use Internet Explorer at the same time to what you provide me a way to return to V4 and stop upgrading my computer. Not been appreciated.

  Can you please mark it as resolved? Thanks, glad it worked

• Play Google services are not supported

  I have a new droid Turbo 2 and IE Google play Services are not supported by my camera. What is the fix for this problem?

  Five representatives of Verizon Wireless looked at the phone scratch their heads. Finally, we went to google game apk download and let him update the downloaded files. All fixed!

• install xp instead of vista and now the recovery discs are not supported

  Pavilion Media Center PC m8000

  1. installed XP on my laptop on the desktop that had need of Vista by mistake
  2. ordered the HP recovery discs and now they are not supported
  3. Build confirmed IDS
  4. How do I remove the XP completely?
  5. Or should I forget it and try to activate the XP?

  Sincerely,

  A ding dong in denver.

  Hello

  I suggest to perform a new Installation, or if you have a recovery disk, you can perform the recovery of the plant.

  For more information, see these links:

  Install Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I hope that helps!

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• How can I remove my video screen not supported

  Philippe I svich on my compjuter it Deniz in the midel of my video screen not supported and I canoe remove at all for 2 days I got that in my thank you screen

  Hi Qamilmurturi,

  You can check in mode low resolution and see if it helps.

  You can read the following article to activate the low resolution:

  Startup options (including safe mode)

  If it works in mode low resolution, then you can change the resolution of the screen, restart the computer and check.

  For more information, you can consult the following article:

  Change the screen resolution

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• I transferred files from my old laptop to my Vista running a new but can't open them as they say that they are not supported

  I transferred files using a windows vista belkin easy transfer cable to windows 7

  * original title - I moved from my old laptop to my new files but can't open them as they say that they are not supported. Some files that I can open it but its just gibberish. Any suggestions would be appreciated.*

  Hello

  You must have the program, the files were written in vista installed in windows 7 to read

  you do not have file extensions

  read this

  You must have the program installed to be able to read the files of programs

  for example, if it's a .doc file, you installed Word

  .xls, you need Excel

  . PPS, you need Powerpoint

  etc.

  but fortunately, there are FREE viewers provided by Microsoft for the file extensions above which will save you having to buy Microsoft Office

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  and you can try the FREE Open Office applications game to read these file extensions

  http://www.OpenOffice.org/

  and here's how to set file associations

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• Tried to open the Excel spreadsheet in Sharepoint, but get the message "cannot open the window because it contains the following features that are not supported by Excel in the browser: sheet Protection.

  I tried to open this Excel spreadsheet in Sharepoint and received the following message.

  "Cannot open the window because it contains the following features that are not supported by Excel in the browser:

  -Protection plate

  You want to try to open the message in Excel? »

  Learn more about the unsupported features.

  YES                       NO

  When I type 'Yes', I had then the second message.

  "To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the browser".

  What should I do?

  Original title: sharepoint excel files

  Tommy:

  I have 64 bit explore.  So I guess that the thought is that the error message was generated by the incoming file, as I have other files Excel I can access in Sharepoint with no problem?  I sent the file Outlook e-mail and was able to open it with no problem at all.  .

  Thanks for the information,

  Jim