Nine work problem

Similar Questions

• Fable: The Lost Chapters has stopped working - problems of crash!

  G ' Day,.

  I bought Fable: The Lost Chapters about two months ago. I have Win7 Home Premium. I played the game for about 15 hours with several minor issues. (It crashed a few times, has happened once or twice) But now I am unable to act. Most of the time when I start the game and try to open my saved this game crashes immediately. Or it will allow me to play for a few minutes and then crash. Most of the time, it seems to be 'save' related. When it crashes it freezes my laptop full and have to wait for a few minutes until I'm capable of anything. My laptop is 2.5months old.
  I was Googling my off _ all day and updated my drivers, which did not work. Also, when I try the compatibility "Troubleshooting" it gives me an error: "Splash.exe" - Windows can't find Splash.exe. "Make sure you typed the name correctly and then try again" I don't know what it is. I do not type anything. Anyway, please please please help. I would really like to continue my game!

  Thanks for your help. Hope that the message has been clear and not too long.

  ~~~

  TL; DR j/p lol

  Have you tried to start a new game and create a new save file? The file just may be damaged. It's funny, the MS site says that it is not compatible with 7. I had hatred that MS and have a game like this, not be compatible with 7.

  Source: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Fable%3a%20The%20Lost%20Chapters&v=Microsoft&uid=&pf=0&pi=0&s=fable&os=32-bit

  If the problem persists, I might even try to reinstall the game as administrator or... XP compatibility mode, or both, if you're patient. A few users have got the game to work even if it's not compatible. For example, Maple Story runs on machines a bit, but isn't supposed to be compatible with 7.

  Good luck.

• COM Surrogate has stopped working problem has caused the program to stop working and windows will close the program

  Impossible to uninstall anything without this message to come. solution is to download the micorsoft updates that are important and I did, and the message always appears

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  Read the info above relating to the resolution of this problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Canon MP Navigator EX has stopped working; Problem event name: APPCRASH Application name: mpnex40.exe

  Original title: Canon MP Navigator EX has stopped working

  I use Win 7 64 bit. I spent an hour with Canon. I followed their directions without success.  I did everything suggested on the internet without success.   I uninstalled and reinstalled. I tried to fix the corrupted user file. The scanner send scans to the computer for work. The person Canon thought it might be a corrupt and says something about a twain file function registry file. Here are the details of the problem:

  Description: Has stopped working the problem signature: problem event name: APPCRASH application name: mpnex40.exe Application Version: 4.0.2.0 Application timestamp: 4df9a6aa fault Module name: ole32.dll Version Module fault: 6.1.7601.17514 fault Module Timestamp: 4ce7b96f Code of Exception: c0000005 Exception Offset: 0004afb2 OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033

  Thanks for any help.

  Hello

  1. have you tried to create a new user profile?

  2. what happens when you work with Canon MP Navigator EX?

  3. do you get an error message? If Yes, what is the full error message?

  4. What are the troubleshooting steps you have tried to solve the problem?

  5. have you done any software or hardware changes on your computer before this problem?

  Try the following steps.

  Method 1:

  Run the fixit from following link.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833
  Display the results.

  Hope the information is useful.

• Install windows on old laptop Got 8 new replacement battery-sector not work problem

  Hi all!

  I have an old laptop Vaio VGN-SR130E. A few months back, I installed windows 8 on it. Microsoft compatibility check approved. Everything was working fine until yesterday, I installed a new spare battery (former it was is unloaded in minutes).
  That is to say "57% (plugged not supported).
  I don't have on this laptop Vaio Control Center and all other services Vaio reason clean installation of windows 8. So I can't say it's the origin of problems battery care function. Already tried to shut down the computer laptop and now the power button / stop after removing the battery. Did not work.
  Can not turn on the laptop without the AC adapter / CC, but after that windows is on I can remove the adapter and system works very well.
  Any help would be appreciated.
  Thanx.

  Thank you, Mr. Ganesh

  I tried to install the software from the disc without success. So I contacted the seller, and they were sent to me by e-mail. Now, I installed it, it was an update for the bios and the battery works perfectly fine now. Thank you very much for your help.

  Concerning

  Abrar Ahmad

• nine earPod problems

  I bought today earPods, wt volume control and other features of the rocker on the helmet. Play the helmet, but its just a little rough, and none of the features toggle will work. Could I have bought defective headphones, or they no longer work wt my camera, iPod Touch version 9.3.3. I don't see why they wouldn't because my camera is fairly new and is being updated. I tried to go to http://www.apple.com/earphones to see if my phone was not compatible, is the link provided in the documentation, but I'm a we're sorry (404) we are unable to find the item you are looking for. Please return to the home page of the Apple Support.

  Bring back them to the store with your receipt.

  TT2

• "Remote Desktop connection has stopped working" problem on Windows 7.

  When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
  "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

  Here is the log of the event viewer:

  Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
  Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
  Exception code: 0xc0000005
  Offset: 0x000000000000c138
  ID of the process failed: 0xf90
  Start time of application vulnerabilities: 0x01ca55cc39bf05f0
  The failing application path: C:\Windows\system32\mstsc.exe
  Path of the failing module: C:\Windows\system32\NLAapi.dll
  Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

  Hi dekopolis,
   
  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• E-mail for blackBerry Smartphones work problems

  Many people,

  I'm new to the BlackBerry scene so be gentle please!

  I tried the setting to the top of my handset to receive my work email, but it achieved so far and told me to contact my company for a few additional settings. To be honest, I tried to do on the fly because im not important enough for me to put emails in place like this. So I wanted to just cancel it with emails, but I keep receiveing network messages every 3 minutes as if the my work e-mail account is still trying to send them. The email I receive is:-

  Sender - [email protected]

  Topic-RIM_bca28a80 e9c0 - 11 d 1-87fe-00600811c6a2

  Message - this message is used to carry data between your BlackBerry handheld and a home server. Please do not delete, move, or reply to this message - it will be processed by the server.

  BEGINETP 9

  BQsAAAAAAAAA

  ENDETP 402479385

  It is really annoying and would like to try stop my work email receive these emails or if anyone knows how to configure it to actually forward the emails it would be much appreciated?

  See you soon

  dicko69

  Hi and welcome to the forums!

  Your phone is configured as a phone based enterprise BES server and not as a private phone.

  This procedure will help you switch to a BIS (personal phone.

  Thank you

  Bifocals

  Please do not forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB10289&sliceId=SAL_Pub...

• Acrobat Pro 9 (nine) works only with Office 365 subscription edition.

  Hi all

  
  I have a new subscription and new download of Office 365. The product is usually bug and really frustrating amendments to links to other programs that are sometimes difficult to understand.

  Specifically, Word 2013 will not communicate with Acrobat 9 Pro

  I tried to create a file PDF of the word through printing to PDF, but makes both programs crash. I tried to save the doc Word, AAP opening and using "Create a PDF file" Pro, but gives also the two programs crash.

  I was able to create a PDF via the Print To option, but since then, the two applications hang every time. Super frustrating.

  Anyone have this problem and, more importantly, a solution?

  Thank you.

  According to web browsers and applications of PDFMaker, office 2013 needs Acrobat XI (11). I understand that office 365 is basically Office 2013. In order to update Acrobat 9 will not solve the problem.

• Tungsten E2 works problem

  Recently, my E2 was wrong to behave. Now I need to push the power on button 2 x before it lights. Any help on this?

  Also, recently the intermittently the screen will not accept my stylus touch as usual, BUT will work so when I tap or push harder on the screen. What is happening with this?

  Any help much appreciated!

  WOW... can you believe it? Answering my own question... with the help of this forum! After around the navigation and search of the "what is the most large memory cards long used successfully...? I realized that I was given as a gift a 8 MB card to add in. I had parked in the slot and when I took it off my E2 works now vigorously that it has and needs! Apparently, E2 is limited to 1 or 2 cards MB MB expansion. Well well... something learned thanks to the site which WAS helpful.

  Message relates to: Tungsten E2

• Resizing work problems

  For some reason when I hover over an anchor point my cursor does not change in the arrows I need to resize my work. I don't have the option to move. I wonder if I have a parameter that can be messed up?

  Update... What I found is that I do not have a bounding box on my work. I can't understand where he lights in my preferences. Any help would be appreciated.

  I thought about it... view > see the bounding box. Now everything works.

  

  Display > display the rectangle enclosing

• Flash is not working problem

  I recently downloaded an update of flash player, but since I get the message "I need to download flash player to view this video" I've uninstalled it and then re installed but I still have the problem.  What should I do?

  http://forums.Adobe.com/thread/885448

• Work problem on the Member in the ASO cube formulas

  Hello
  
  I was asked to convert a planning cubic request in a single cube ASO BSO. I managed to convert a BSO Cube ASO through the Regional service console and added members in another cube throgh rulesfile OSB.
  
  Now, I must write formulas for Level0 member account dimension members. These are very simple as formulas
  
  If (@ISMBR ("New_Seats"))
  'Value '=' active Total Cost assets';
  on the other
  'Value '=' Asset_Value assets ';
  endif;
  
  and
  
  
  'Empty_Seats '= (("New Seat Additions"+"Available_Seats") -"Required_Seats");
  
  
  This is the first time that I'm working on ASO. I get this error when writing these formulas
  "Syntax Error error (1260052) in an mdx query to enter on line 1 to token '=' Empty_Seats... '. »
  
  Help me to write these formulas and also in the choice of appropriate member properties.

  Try something like

  CASE
  When IS ([%{dimname/}]. CurrentMember, [New_Seats]) THEN [assets Total cost]
  Else [Asset_Value]
  END

  and

  ([New headquarters] + [Available_Seats])-[Required_Seats]

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• network of work problem

  Nice day!

  We have a network in our office, unfortunately I can't connect to the network and it keep posting on incorrect password or user name. but when I tried it on other computers, I was able to sign in. I will do? bad, I need your help... Thank you..

  Hello

  It seems that you can not connect to your corporate network. Your question is more complex than what is generally answered in the Microsoft Community. It is better suited for the IT Pro TechNet public.

  See the link below to ask your question.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking&filter=AllTypes&sort=lastpostdesc

  Hope this information helps.

• Anyone encountered this problem and error "PhotoShop CC 2015 has stopped working" problem event name is - APPCRASH - Photoshop.exe App App Version - 16.0.1.168 timestamp - 55f6140

  

  Hi gbshea57

  As I see that defective module is StackHash_1971.

  Please try to run this way: hold down the SHIFT key and click on photoshop to open.

  Photoshop will show a box that should be asked to disable the third-party plugins.

  Click Yes, and then check if that opens.

  ~ Jitendra