Data allowance

Similar Questions

• error code ox80070005 for s/p3 office. Failed 3 times but still exhausted my data allowance

  running windows xp home edition (sp3) I have tried 3 times to install office 2007 sp3 without success, yet every time 275 MB of my data allowance was "eaten". As I'm only authorized a pox 1 GB per month, this situation plays havoc with my blood pressure. Ox80070005 error code is reported. Is this a known issue with an easy remedy?

  confused 1.2

  Download and save the Setup file of Service Pack 3 for Office 2007 in normal mode.
  Once you have downloaded the file and saved on the system, then boot the system in clean boot mode and try to install service pack 3 and check.
  Service pack 3 does not figure in the automatic updates or if you are trying to download the file and then try to install it?
  Open any Office application and check if service pack 3 is already installed.
  For example, open Word, click file< help="" and="" check="" if="" service="" pack="" 3="" is="" installed.="">

• Is it possible that the size of data allowed to be &gt; 11FR in the final product?

  Is it possible that the size of the authorized user data be > 11FR in the final product?
  
  There are so many other restrictions in 11gXE, really makes very different version XE SE (1). So, why not just allowing more user data? It must be an internal parameter that can be changed for the final release.
  
  R / Zaf

  In my opinion, one of the aspects is the competition. Mainly MS Express varying with roughly the same limits of equipment. DB2 Express-C has more loose limits but however defined a comparable feature. Also add into the mix that Oracle have MySQL and BerkeleyDB.

  You just need to make a compelling business case analysis as why Oracle should be the limit before time/competition. ;)

• URGENT! limiting apx user frm applicatn change a field data (allow to create)

  Hello
  
  I have a table with 3 columns say
  
  col1 primary key
  col2
  COL3
  
  I fill my col1 with a trigger to insert berfore
  
  I built an application apex with a page of report and form table above.
  
  my end user can create new records through the page of application form (form page shows and allows only col2, col3 to be filled)
  
  Once the folder is created by the user, if you change the same record (by clicking on the Edit ICON present before that particular record) only col3 must appear as editable in the form page to be updated by the user.
  
  Please help me its urgent.
  
  Thank you and best regards,
  Ajay
  
  Published by: Aj on August 4, 2011 03:55

  Hi Ajay,

  When navigate from a link pass (change ICON) tell application "UPDATE" and:
  (1) make col1 and col2 as disabled / ReadOnly at the request of UPDATE. (using the Action dynamics or other means)
  (If you disable and operation of update in which you use disabled items that you must re-enable submit it)
  (2) conditionally display items that are not displayed col1 and col2 on request UPDATE.

  I hope that helps!
  Kind regards
  Kiran

• DEFAULT: Beta to model data allows the optionals in logical UKs

  When you enter a logic model, I didn't have the right to choose one optional attribute or relationship to include in a definition of unique key.
  
  The physical level correctly allows me to do.

  Hi David,

  We'll fix it.

  Thank you
  Philippe

• How can I find out why my iPhone 6 is using data so

  How can I find out why my iPhone 6 is using data so

  What do you mean by data? Do you mean using your your wireless provider data allowance, or hear you storage space for files?

  See how much storage you have used on your iPhone, iPad and iPod touch - Apple-Support - http://support.apple.com/HT201656

• Enterprise remote data deletion

  Hello everyone, I'm still new in the it field. I got a year ago, with a degree of general partners of a school local tech. I'm currently studying for my Windows 8 cert. I read an e-book and came across remote deletion of corporate data. I was talking to a colleague who is interested and wants to learn more. I'm doing some research on this subject. What I understand users can use their smartphone or laptop and connect to the network/domain to access the data. If the laptop or the phone goes missing, we can use this tool to remotely wipe the device or temporarily to make the data on the device unusable. I understand that RBDR is using Exchange ActiveSync to management along with Active Directory for authentication. Many of our customers use Office 365, so everything is done in the cloud. I have done a lot of research on Google but have not found much RBDR except that it is. Can someone help me understand this tool or point me to a good article that explains a bit more in depth about how this works.

  Any help is very appreciated. I'd like to understand what this tool and how it works.

  Thank you.

  Brandon

  Removal of remote enterprise data: Allows personal devices to connect to, access and store the business content that can be effectively removed from the device by HIM at a later date, while retaining the personal data intact.

  Selective Windows wipe for the management of data from devices

  http://TechNet.Microsoft.com/en-us/library/dn486874.aspx

  Do a wipe on a Mobile phone remotely

  http://TechNet.Microsoft.com/en-us/library/aa998614 (v = exchg.150) .aspx

  I have earlier recommended that you post on TechNet Forum.  These are specialists who are better able to answer all your questions about RBDR.  You can also try to post questions on this site Office 365.

  http://Office.Microsoft.com/en-us/Office-365-Business/Office-365-small-business-Setup-Center-HA104218051.aspx

• Slow data rate

  For analog and digital i/o I used a grid of AutomationDirect DL205 with EBC (ethernet) module to communicate with Labview via datasockets to connect to KepDirect OPC server. This technique worked well in the past, but on my 2 projects lately, I noticed that I am only receiving data at 100 m, I have my collection of data in a loop of 10 ms but I get 10 of the same sets of data, allowing a rough graph.

  I know the data are updated much more quickly in the OPC server but apparently the datasocket is it slows down. I contacted NOR but never received an answer clear of how fast the datasocket updates. Add the DSC module and associated items is not an option, very cost prohibitive when adding an executable to a machine.

  I used this combo of material for some time, back to LabView 2010, but he seems to have become a problem in the 2013 and 2014 version now. We love using this method, because there is no plug in boards or USB, just a running ethernet cable the control PC or laptop.

  Anyone has any experience with datasockets? Is there something I can change to increase the speed of reading?

  I use LV 2014 Professional, KepDirect OPC 5.5, private LAN within the machine (not connected to the corporate network).

  Thank you.

  Thanks, I did that before but for the devil to him I tried again. I used the same concept as you had but he left in a loop to find the minimum time difference when running my program on the other. The smallest value that I saw was 0,0700 sec.

  Because I don't really want to send a machine with an earlier version of Labview, I won't bother trying with previous versions. I just bought a different analog i/o module with ethernet connection that has VI void instead of use datasocket. I'll see how it works for the collection of data.

  Thanks for your help, I guess I am done investigation at the moment.

• Why the prevention of execution of data is closed itunes?

  I try to connect to itunes. I get itues has stopped working properly. What is a custom of preventation of executing data allows me to go on itunes. never had this problem before. So it has been for a week. you will need to get pieces of itues for my work.

  Try to update to iTune or install the latest version. Try to uninstall and install the most recent. Also run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• store data when no database

  Hello

  I have a problem on the data store when there is no database.

  first of all, I will write a file (not as a single file)

  Secondly, there are a few pages in this file

  Thirdly, there is some content in each page

  I'll look at all of the files that I want to but I don't know how to store data and use of these data.

  Thank you.

  Both persistent store and files SD Card connection will do what you want to do, but not for free, you have to deal with yourself.  As an example of implementation, in the persistent store, you can establish a relationship of object with references to the data included, alternatively on SD card, I suspect that the best way is to have several files and use a 'link' as a mechanism similar to the link between the html files.

  So whatever it is, you have to do, it is which of these options you want to choose.

  That decision will depend mainly on the size of the data allowing you to manage, and to a lesser extent, the performance you need.  Older data must go on SD card, but this will slow down the performance.

• Steps of the DCI Get Enterprise Server Data

  After reading the online help regarding

  CIM get data of Enterprise Server and

  Define the procedure of data of Enterprise Server, I always

  do not understand how these two steps

  and how to use them. Can someone help

  explain what is the Enterprise Server domain

  and how to use these 2 steps? A few examples will be

  also be useful. Thank you!

  Hello

  Let me explain with an example.

  Assume that the call center is for the banking sector with the flow IVR as shown below

  ---> Start

  ---> Play invites (welcome to XYZ Bank)

  ---> Menu (press 1 for banks and 2 for credit card)

  ---> Output1

  ---> Get string of digits (enter the account number)

  ---> Other steps

  ---> Output2

  ---> Get string of digits (enter the number of credit)

  ---> Other steps

  ....

  IVR collects the account number or the caller's credit card number and provides information associated with the appellant. If the caller needs more information, they connect to the available agent. In order to provide detailed information to the appellant, the agent requires a/c or CC number. Since this information is already collected by the IVR, the same can be sent to the Agent and the data can be filled in the screen of enterprise data.

  To move these data values to the company data screen, use "Set Enterprise Data" step in the script. Correlatively, the configuration of business data must be done in the office administrator.

  Flow of use "Set Enterprise Data" is given below

  ---> Select resource (Set Connect property as 'No')

  ---> Selected

  ---> Set Enterprise Data

  ---> Connect

  ---> Queue

  The guide of the desktop administrator to configure business data fields

  http://www.cisco.com/univercd/cc/td/doc/product/voice/sw_ap_to/apps_3_5/english/admn_app/cadad455.pdf - Pg.No: 2-3

  See also Tech Tip for ' how to set up a company data screen Pop?

  http://www.Cisco.com/en/us/partner/products/SW/custcosw/ps1846/products_qanda_item09186a00801df049.shtml

  Get the data of the company:

  Step to get Enterprise Server data allows to retrieve a field Enterprise Server and store it in a script variable.

  When a call is routed to an agent of the CIM with customized business data, the same will be skipped on the company information window. Agents can change the value of these fields in custom business data and transfer to the script of the aef. The script can retrieve these values using 'Get Enterprise Data"step.

  It will be useful.

  Concerning

  Yogi

• BlackBerry smartphones can not connect to internet by wifi when stop the data plan

  Hello
  I use a Blackberry M1, provider of Singapore internet service.

  To manage the use of the data, I turn off the data plan across mobile networks, but then I also cannot wireless internet. Why is this?

  Furthermore, how to manage the use of the data? I want to use the service plan when I need to minimize the use of the data, because I only have 1 GB for free a month.

  Thank you.

  If a good Wi - Fi signal and a network connection is available, your phone uses by default the Wi - Fi connection automatically IF this connection remains strong.  If your phone is having trouble maintaining in this regard, it will return to your network connection and exhaust your monthly data allowance.

  What about applications that can monitor your usage, someone else will have to intervene with a response.  Your carrier should have something available to monitor the use of your data.  Calling it couldn't hurt.

  I hope that clears things up for you.

• Windows 7 Homegroup is consume data?

  I'm totally new to the technical aspects of computers. Kindly give a clear answer.

  I use a modem CPE wifi, connection speed is 2 Mbit/s and I am allowed to consume 12 GB maximum data by month. Now when I connect my desktop computer to my laptop using Windows 7 Homegroup and read the files from one computer to another, is that consume my quality of data allowed? How does actually two computers are connected?

  I thank very you much for your kind reply.

  Yes, maximum of 12 GB per month. Currently, there are various packages provided by my ISP. I am from Pakistan, where the internet is not as widespread as in other developed countries. There are, however, some ISPS that provide connection speed up to 50 Mbps (collage VDSL2 technology), with unlimited downloads, but it's expensive for a student like me. It's sort of 'The student package', and that's enough for me.

  Your answer is self-explanatory. Bundle of thanks.

• GO TO DIFFERENT DATES

  Hello

  I have the rest of the table.

  CREATE TABLE PERMITTEDMINUTES AS

  (

  SELECT 1 EMPID, TO_DATE (' 21/03/2015 ',' DD/MM/YYYY') FROMDATE, TO_DATE('25/03/2015','DD/MM/YYYY') TO DATE, 30 MINS FROM DUAL UNION ALL

  SELECT 2 EMPID, TO_DATE (' 03/23/2015 ',' DD/MM/YYYY') FROMDATE, TO_DATE('26/03/2015','DD/MM/YYYY') TO DATE, 45 LIKE MINUTES FROM DUAL UNION ALL

  SELECT 1 EMPID, TO_DATE (' 15/04/2015 ',' DD/MM/YYYY') FROMDATE, TO_DATE('20/04/2015','DD/MM/YYYY') TO DATE, 15 MINS FROM DUAL LIKE

  );

  This means from 21/03/2015 until 25/03/2015, the employee is allowed to take 30 minutes door without loss of pay.

  also from 15/04/2015 until 20/04/2015, he is allowed to take 15-minute door daily.

  I want that these lines must be extracted as follows

  ====================================================

  EMPID DATE ALLOWED MINUTES

  ====================================================

  21/03/2015 1, 30

  22/03/2015 1, 30

  1 30 23/03/2015

  24/03/2015 1, 30

  25/03/2015 1, 30

  23/03/2015 2, 45

  24/03/2015 2, 45

  25/03/2015 2, 45

  2 26/03/2015 45

  15/04/2015 1, 15

  16/04/2015 1, 15

  17/04/2015 1, 15

  18/04/2015 1, 15

  19/04/2015 1, 15

  20/04/2015 1, 15

  ===================================================

  I tried after query, but the output is not correct

  SELECT

  EmpID,

  FROMDATE + (LEVEL 1) PRDATE.

  mins

  PERMITTEDMINUTES log LEVEL < = TODATE - FROMDATE + 1;

  Help, please

  I use oracle 10 g

  When you make a connection in query on several lines in the source, you must do a little trick with "prior sys_guid()" and other details of connection to allow it to connect simply on the details on the right while the generation of the line, but also to prevent a cycle in the data (you can simply use nocycle).

  Like this...

  SQL > ed
  A written file afiedt.buf

  1 with PERMITTEDMINUTES like)
  2. SELECT 1 EMPID, TO_DATE (' 21/03/2015 ',' DD/MM/YYYY') FROMDATE, TO_DATE('25/03/2015','DD/MM/YYYY') TO DATE, 30 MINS FROM DUAL UNION ALL
  3. SELECT 2 EMPID, TO_DATE (' 03/23/2015 ',' DD/MM/YYYY') FROMDATE, TO_DATE('26/03/2015','DD/MM/YYYY') TO DATE, 45 LIKE MINUTES FROM DUAL UNION ALL
  4. SELECT 1 EMPID, TO_DATE (' 15/04/2015 ',' DD/MM/YYYY') FROMDATE, TO_DATE('20/04/2015','DD/MM/YYYY') TO DATE, 15 MINS FROM DUAL LIKE
  5    )
  6  --
  7. end of test data
  8  --
  9. Select empid
  10, fromdate + (level-1) as dt
  11 mins as allowed_minutes
  permittedminutes 12 p
  13 connect by level<= (todate-fromdate)+1 ="" --="" row="">
  14 and empid = empid prior - part of key for the specific source line
  15 and fromdate = prior fromdate - part of key for the specific source line
  16 and todate = prior to date - part of key for the specific source line
  sys_guid() 17 and prior is not null - prevent the cycle of data
  18 * order of p.fromdate, 2
  SQL > /.

  EMPID DT ALLOWED_MINUTES
  ---------- ------------------- ---------------
  1 2015-21/03 00:00:00 30
  1 22/03/2015-00:00:00 30
  1 23/03/2015-00:00:00 30
  1 24/03/2015-00:00:00 30
  1 00:00:00 25/03/2015 30
  2 23/03/2015-00:00:00 45
  2 24/03/2015-00:00:00 45
  2 00:00:00 25/03/2015 45
  2 00:00:00 26/03/2015 45
  1 2015/04/15 00:00:00 15
  1 16/04/2015 00:00:00 15
  1 17/04/2015 00:00:00 15
  1 18/04/2015 00:00:00 15
  1 19/04/2015 00:00:00 15
  1 20/04/2015 00:00:00 15

  15 selected lines.

• I am concerned about the use of the data necessary to ensure backing up my iPhone, the iPad and the powermac cloud. We are on a 20 GB/month plan with our internet provider and had $50 in excess costs last month due to the clouds to backup my phone and IP

  Help! I'm on a limited data plan (20 GB/month) and had $50 in excess charges the month last because of the iCloud backup my iPhone and my iPad from one day to the next. This consumed approximately 15 GB backup overnight. Is it possible to program these backups, so I'm not on my data allowance? And what is the average amount of data usage when the cloud goes back a device? This amount seems extreme to me. Please help if you can, thanks!

  Hello

  I ask you to contact you please contact customer service