no address assigned to pi INET raspberry

Similar Questions

• How to find the IP address assigned to Dev Alpha for use with blackberry-deploy?

  The Playbook, I use blackberry - deploy to install the .bar file. It requires the IP address assigned to the Playbook, which is available by clicking on an icon in the status bar in development mode.

  However, I don't see such an icon on the alpha of dev. Is it possible to find the IP address assigned to Alpha of Dev that I can use with blackberry-deploy?

  Answered my own question. Its network connects-> advanced-> Internet connection.

• Extended to Airport Extreme Ethernet ports not IP address assignment.

  I have an Airport Extreme as my basic router and another Airport Extreme and an Airport Express, which runs from the router.

  Since the extended Airport extreme, I have an Ethernet Hub and a Macbook Pro connected via an Ethernet Port, but every time I attach any device to the ethernet port on the Airport Extreme of the device has an auto assigned IP.

  Although, when I'm attached to the long terminal Airport Express, it's the IP assignment correctly.

  Is a way I can make the Airport Extreme to assign the IP address?

  Is a way I can make the Airport Extreme to assign the IP address?

  The two airports 'extension'... the AirPort Extreme and AirPort Express... are in Bridge Mode when they "extend a wireless network".  DHCP (the process of allocating IP addresses... is disabled when a device is in Bridge Mode... it's up to your "main" AirPort Extreme to assign all IP addresses to network devices.)

  The 'extension' airports simply pass the IP address information to connected devices... the devices 'extension' assign IP addresses themselves.

  Since the AirPort Express works correctly, it seems that the 'extension' AirPort Extreme is the culprit.  From what you have told us, it seems that if the Ethernet switch on the device is not working properly. We learn more about this unit before us to jump to conclusions.

  (1) what is a newer version of the 'tour' of the AirPort Extreme or an older version of 'flat' or 'square' to the extreme?  If it is the old version, we need the model number of the bottom of the unit.  It starts with an "A" followed four digits.

  (2) when you connect an Ethernet cable to one of the Ethernet ports to the extreme that extends, is the little green light next the port light?

  (3) what operating system you are using on the Mac or the PC that you use to configure the airports?

• Static IP address assignment to a device? (An XBox)

  I'm trying to set up my XBox One to broadcast remote but I am completely ignorant when it comes to networking and rely the economy on the default settings. There seem to be three main parts to this process described here:

  - Port forwarding (which was explained by DexterJB. (Thank you!)

  -Allocating an address static IP to the device (This step)

  - and implementation of dynamic DNS

  I was wondering if someone would be willing to walk me through step of assigning a static IP address to a device, which in this case is my XBox One.

  I really wanted to know that for a while for other devices, but do not know if it is a thing of router or a computer thing. I'd appreciate any help.

  Hi @varxtis,

  You are welcome!

  Instead of setting a static IP address for your XBOX, you can make a reservation address so that the XBOX will have a compatible IP for port forwarding you have done. You can refer to the link below for the steps on how to do it.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/24091

  Kind regards

  Dexter

  The community team

• Fixed IP address assignment to a PAP2T

  PAP2T hung in the WRT54G. When I put the config PAP2T DHCP = Yes, it works fine, but the router assigns a dynamic IP address. When I put the PAP2T for DHCP = No and provide a fixed IP, subnet mask and gateway, it does not connect to the host of VOiP. What should I do to make this work?

  Reason: My VOiP provider said I should use the port forwarding on the router for some audio problems. The other day, the router got turned off and now VOiP is assigned to a different IP address. I need to correct the address to avoid such problems in the future.

  When you assign a fixed ip address, you must also define the addresses of the DNS servers.

  Some routers will also allow you to specify a specific (fixed) local network address mac - id-based.  This is another way to solve the problem.

• static IP address assignment to TiVo on BEFSR41 router

  Hello

  I'm trying to put in place a couple of TiVo cable already on my home network so I can 'see' on my Mac using the TiVo Express of Toast Titanium function and copy the TiVo on my Mac programs.   TiVo technical support suggested that the problem is that my Mac IP address is 198.162.1.100 (assigned automatically) and for some reason some of my TiVo is on 198.162.0.2 et.0.3.  They suggested that I have manually assign a static IP address for the for put them in 'sync' with my Mac address - that is to say, something in the range 198.152.1.xxx of TiVo.

  I was able to assign a static IP address of 198.162.1.109 to the head of the TiVo (and my Mac is still not see it), but I received an error message when I tried to assign 198.162.1.110 to the other TiVo.   Technical support suggested I check with you on assignment of the IP address via the router.  Can you tell me if this is possible and if so, how?

  Thank you!

  If the TiVo is Gets an IP 192.168.0.2 or similar when using dynamic/DHCP/Auto IP addresses means the TiVo is connected to a different router or get an IP address from another DHCP server.

  1. Please check your wiring. Your modem should connect to the internet, the port of the BEF everything is connected to the BEF. If the modem has additional LAN ports, a modem/router combo device. Do not use additional ports on the modem/router combo.

  2. If wiring is OK, as previously indicated another reason for a 192.168.0.2 automatic address IP sharing a computer inside your network that has been configured for an internet connection. With internet connection sharing you can share an internet connection through this computer. To do this, the computer will assign 192.168.0. * IP addresses on its side LAN. Please check your computers if there is one that has internet connection sharing enabled.

• want to 5530: electronic address assigned to my printer was not found

  Hello

  This is a crazy question, but I'm new to this...

  I've just hung up my new printer and in the process, I assigned an email address to it.

  It works very well. But I can't remember what was the address, does anyone have an idea where to find?

  I changed the first name, then it when something like @hpprinter...

  Thanks for any help,

  Silverbuzz

  Hey @silverbuzz,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have assigned an ePrint address your 5530 desire, but are unable to find it. I can help you with that.

  To find ePrint printer address from the main screen of the printer click web services icon in the upper left corner of the display screen.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• Determine the IP address assigned to the laptop using SONICWALL VPN to connect to the network

  Hello

  How can I determine assigned by DHCP IP address internal LAP assigned to a laptop computer after that it connects to our network. We use the client VPN Sonicwall.

  For example, our model of IP network is 10.11.12.x. I guess that any VPN client PC Gets a 10.11.12.x address once the connection is established.

  Thank you!

  Click Start (or press the Windows key) and type cmd , and then press Ctrl_Shift + enter together. This will launch a prompt with high privileges. Acknowledge the UAC warning and provide credentials if necessary. Once you have the command prompt window use this command at the command prompt.

  IPCONFIG/ALL

  If you don't have administrator access on your computer, use cmd with just Enter and this simple command at the prompt window.

  IPCONFIG

  You get your address IP LAN, just not all the information available.

• IP DHCP by SSID address assignment

  Hello

  I want to assign addresses IP of SSID on the 861W. I have two VLAN on the router on two different subnets and a DHCP pool for each subnet. AP I have two on each SSID and VLAN.

  However, when I associate it with different SSID, I get an ip address from a DHCP pool, instead of different pools. I want ip from different subnets with SSID.

  Any help is greatly appreciated.

  Here is the config of the AP:

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  host ap name

  !

  enable secret 5

  !

  No aaa new-model

  clock timezone IS - 5

  clock to summer time EDT recurring

  !

  !

  !

  dot11 ssid Public

  VLAN 1

  open authentication

  !

  Voice of ssid dot11

  VLAN 2

  open authentication

  !

  !

  !

  Cisco 7 password username

  !

  Bridge IRB

  !

  !

  interface Dot11Radio0

  no ip address

  no ip route cache

  !

  SSID Public

  !

  Voice of SSID

  !

  station-role root-access point

  !

  interface Dot11Radio0.1

  encapsulation dot1Q 1 native

  no ip route cache

  Bridge-Group 1

  Bridge-group subscriber-loop-control 1

  Bridge-Group 1 block-unknown-source

  No source of bridge-Group 1-learning

  unicast bridge-Group 1-floods

  Bridge-Group 1 covering-disabled people

  !

  interface Dot11Radio0.2

  encapsulation dot1Q 2

  no ip route cache

  Bridge-Group 1

  Bridge-group subscriber-loop-control 1

  Bridge-Group 1 block-unknown-source

  No source of bridge-Group 1-learning

  unicast bridge-Group 1-floods

  Bridge-Group 1 covering-disabled people

  !

  interface GigabitEthernet0

  Description the GigabitEthernet incorporated AP 0 is an internal interface connecting AP with the host router

  no ip address

  no ip route cache

  !

  interface GigabitEthernet0.1

  encapsulation dot1Q 1 native

  no ip route cache

  Bridge-Group 1

  No source of bridge-Group 1-learning

  Bridge-Group 1 covering-disabled people

  !

  interface GigabitEthernet0.2

  encapsulation dot1Q 2

  no ip route cache

  Bridge-Group 1

  No source of bridge-Group 1-learning

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  customer_id GigabitEthernet0 dhcp IP address

  no ip route cache

  !

  IP http server

  no ip http secure server

  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

  1 channel ip bridge

  !

  !

  !

  Line con 0

  no activation-character

  line vty 0 4

  local connection

  !

  end

  To answer your previous post, you have no need create control2.

  I think that you need on the trunk of your gig0 on the router interface. Try:

  interface GigabitEthernet0 Wlan

  switch to trunk encapsulation dot1q

  mode trunk switch

  Let me know if this does not work.

  Jeff

• RV042 router multiple WAN IP addresses assigned to different ranges of LAN IPs

  I would like to have them assigned to different LAN IPs and multiple WAN IP addresses. If I used the special option NAT its give me only the LAN IP 192.168.1.xxx. There is an option to specify more than one LAN IPs but it is not possible to transfer the ports of these additional LAN IPS or installation rules.

  Is any way to eat this with this router. If this is not the case, what is the router that will meet my needs?

  Andreas,

  
  

  Unfortunately what your want to do does not work with the rv042.  It will allow only one to one nat rules apply for the local network subnet by default.

  
  

  You can use the sa500 series router that will allow you to make ip aliases to different lan subnet addresses.

• Only 1 of the 2 computers in my LAN recognizes my static IP address assigned by my ISP - HELP!

  I have an IP address from my ISP, but only one of the two computers in my LAN presents this static IP address in the "ipconfig" and it connects to the internet, the other computer Watch has "169.254.XXX.XXX' IP address and does not connect to the internet.  How can I fix it? I don't know much about the TCP/IP settings.  OS is XP Pro SP3.  I have a DSL router from single port connected to a simple switch 5 ports, then two CAT5 cables will switch on both computers.

  Thanks for your help!

  derisk

  Hello

  Two computers cannot connect to the same connection using the same IP address. Each computer on the network must have its own unique IP address.

  You need to get a cable/DSL router. Configure the WAN port (Internet) side with your static IP address and connect all the computers the and other equipment network on the side of the router LAN.

  Generally, it looks like this, http://www.ezlan.net/network/router.jpg

  P.S. You don't need to use the wireless if you do not, it is very difficult to find a new wireless router.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Virtual Hostednetwork is not a specific computer ip address assignment.

  Hey there, I created a virtual network of hosted on a laptop for a long time to share my internet connection with my laptop and my phone. Recently, I swapped the hard drive of the computer that is sharing the connection with my laptop's hard drive in order to use the drive more important to me. the problem starts when I try to start the hostednetwork. All devices except my laptop (my phone and a third computer) are able to connect to the hosted network. My laptop is able to connect to any other network except the hostednetwork I created. When I type ipconfig/all in cmd, I see that my laptop is not getting an IP valip, but an automatic private IP addressing. I have updated all network drivers to their latest versions, tried ipconfig/flushdns and created a different hostednetwork with the dispute ssid and password, all with the same result. Thanks for any help in advance. I'll try and reinstall the adapter for the laptop share the connection

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• VPN client: static ip address assignment for xauth

  is in any way to affect a specific (via CSACS) to a vpn client ip address each time when you use extended authentication?

  Already answered in security - the AAA forum.

• Client proxy (on USB) with DHCP address assigned IP does not work with FRDM-K64F

  Hello

  After reading the questions on this forum with a static IP address on the Freescale FRDM-K64F set, I went for a DHCP address, but I can't get the proxy client to work via USB with DHCP connection either.

  My console tells me the following:

  Time of RTC: sea-2014-01-01 00:07:27

  Network initialized

  IP address: 10.143.xxx.yyy (xxx and yyy is real numbers, just change them to the forum of letters)

  Subnet mask: 255.255.252.0

  Gateway: 10.143.xxx.yyy

  MAC address: 00: 0C: 00:06:70:00

  And when I try o connect with the following command:

  java-jar proxy.jar - socket 10.143.xxx.yyy

  I get the result without CLI interface and next:

  Trying to open the socket with device connection: 10.143.xxx.yyy:2201

  [Connected to the Jack: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]

  Open channel 8 with hash 0x130399b3

  Channel 8 CLOSED-> OPEN

  notifyResponse AVAILABLE_RESPONSE on channel 8

  AVAILABLE OPEN-> 8 channel

  Open channel 9 with hash 0 x 0

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  I don't know if this topic but my version of java is:

  Java version "1.8.0_31".

  Java (TM) SE Runtime Environment (build 1.8.0_31 - b13)

  Java for 64-bit Server VM (build 25.31 - b07, mixed mode)

  Any ideas or am I missing something completely?

  Thank you

  Andy

  Hi Andy,.

  your log shows that the proxy is connected with the Board of Directors.  To start the CLI, you can either provide '-j' have ' touch to the proxy command line or PuTTY simply connect to localhost (raw Protocol, port 65002)

  / Sergey

• to connect to a WiFi with assigned IP address?

  How do connect me to a WiFi with the IP address assigned? I configured my iPad Mini as a personal Hotspot, now I'm trying to connect to the internet using my MacBook/iPhone via WiFi network but it says the wifi network has an assigned IP address and cannot connect to internet!

  If you want to remove yourself public reactive and connect to the wi fi once more, please follow the steps:

  1. open system preferences > select network.

  2. click on the padlock and enter the user name & password.

  3. Select WiFi connected and click Advanced

  4. uncheck the box remember this network and click the sign minus.

  5. take the cursor to the menu bar top & select your network name, then click on apply and close the lock.